Autostart, AutoStart, autorun
My computer starts up on its own. I stopped and shut it down, and when he wants, he starts.
Hello
Check your configuration/settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and
so now.
Troubleshooting Windows Vista sleep and extended
http://www.computerperformance.co.UK/Vista/vista_hibernate.htm
How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
http://support.Microsoft.com/kb/950686
May need to reset all to default power settings and then place back as you prefer.
How to solve a problem of Mode for Vista and find a Solution
http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html
How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html
How to restore the default power in Vista (and then go back and change as you wish)
http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html
Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
and other devices. (Double click on the device and the power management tab)
May need to reset all to default power settings and then place back as you prefer.
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
Tags: Windows
Similar Questions
-
How can I make autorun for windows XP/autostart when I put a CD
I do not remember where to go to change automatically run the program CD so when put in my computer.
Hello
Go to this link as you will most likely need to fix...
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=c680a7b6-e8fa-45C4-A171-1b389cfacdad
Or you can go to my computer right click drive > auto play tab properties and have alook here...
Concerning
GT4U
-
AutoStart w/o JDE (Eclipse)
I use the plugin Eclipse and all the docs seem to point to examples of JDE autostart configuration.
Can you tell me what the JDE is hilarious on the autostart options so I can do the Eclipse?
Thank you
I havn't widely used eclipse, but you can find the autorun option in the ownership of the project.
-
How warns we Touch & launch the autostart?
Hello world
How we keep Touch of Toshiba and launch (PadExe.exe) to launch at system startup?
I hope that there is another way than editing autostart configuration (MSCONFIG) system.
Thank you
Thomas JedenfeltHi Thomas
The fastest way is to make a shortcut in start all startup programs. There is also another way. You create a new entry in the Microsoft Registry editor, but it's more complicated.
Usually, if you install the utility & t, it starts automatically when the system starts.
-
How to disable Autostart music when the headset is connected and smartconnect?
Hello
After rooting my Z3C and upgraded to fw.5.77, I have disabled some packages app via the Asian Development Bank, as the package "SmartConnect" (com.sonyericsson.extras.liveware). But I still have this annoying music autostart when I connect my headphones.
If someone could tell me how to turn off once and for all this (music?) on the road via ADB or freeze it through titanium backup?
Thank you!!Thanks for your reply Uliwooly!
I fact, but autolaunch suite...
I finally found that also was an option in my Walkman (PowerAmp) I had to disable
Thanks again for your help!
-
Currently, using windows vista Home premium. When I open the Software Explorer in windows defender and look at the start of the programmes, the Narrator is not listed. When the Narrator is on, and I watch the current programs, sometimes it is not even in this case, but when it is finally shown, he says 'no' to autostart. Despite all this, Narrator starts again automatically on 30secs after that I turned on my computer.
Start > Control Panel > easy access to the Center > use the computer without a display and make sure that the box is not checked for Narrator begin.
If it of not here then navigate around this area to configure this setting! Wingstmontana M.C.D.S.T.
-
Autostart - foreground application
Hi all
I use RIM-MIDlet-flags-1:1 for autostart my request but I want it shows a screen at startup - I'm pushing the screen and asking the foreground but although the application automatically starts the screen don't be pushed to the forefront - can I do something to achieve?
Regads
Alex
did you check the boot process? the boot process is already over?
see this example:
find this comment:
Check if the BlackBerry has completed its startup process.
Once the boot process is completed,
Push your screen using pushGlobalScreen().
hope that helps.
-
Flag to set Autostart on request submit to the App World vendor Portal
Hi all
I've been wondering. How the device know if my application will be run automatically at startup (when the device starts up) or not, if my application is installed by the user from the App World?
I thought that the autostart flag is stored in the Blackberry App descriptor XML file then reflected to the .jad file once I've compiled my app.
Presentation on the App World vendor Portal requires only the .cod files, not the descriptor xml file or a .jad file.
The autostart flag is also stored in the .cod file?
Yes
-
BlackBerry 10 Autostart/keep apps running
Hi all
There are a few apps (for example, reminder, calendar, LinkedIn and so on) that I want to run continuously. If, for some reason, they are closed, they need to be restarted. I would also like their Autostart each time that I reboot my passport.
The reason is that I use the information in the active frame and I don't want to keep away from these applications whenever they are, for some reason, have been closed.
Is this possible with BB OS or some app?
Edit: I just did a reboot of my passport and all managers active where even on my home screen, so that part seems to work. However, they are just frameworks without content. I have to actually start the application and reduce it until it's content assets. Is it possible to have managers are updated just after reboot?
Thank you
Peter
Sorry, there is no setting for it. You must manually start the apps.
-
Turning point autostart/disable by program?
Hello.
My request is autostart-ed (fixed by the JDE).
I want to allow the user to change the behavior of autostart (i.e. allow him to activate the start feature automatic power switch)
Can be done programmatically (for example using a registry, or in the same way entry value)?
(I know I can use a second method of entry point - I was wondering if there is a way to do it using simpler, because the second approach entrypoint is a fake autostart switch since the app will be started automatically when even :-))
Thank you
There is no way to stop an application to be started automatically. However, your application could determine if it needs to run its start-up operations or not. You can store a persistent value that the application check at startup. If true, it performs its start-up operations, if set to false, he couldn't do anything and go out.
-
How can I stop audio autostart in website designed by Dreamweaver CC 2015?
I have three audio files on a single page that auto start at the same time on the opening page even if the setting is autostart = false. How can I stop audio autostart?
Use the HTML5 tag
-
Lightbox Autostart doesn't seem to work on my site!
My site: freedom lawns USA Inc. - Corporate Site
Created an album of blank publication with a form inside. Filled in, a background color and a close icon. Checked autostart. Nothing happens.
I tried to check marking autoplay. Nothing happens.
Removed the form of contact and left the lightbox - NOTHING!
Any ideas?
Thank you!
Just to be sure, did you follow the process to Add, test and hide jQuery widgets in Adobe Muse ?
-
AutoStart vs autorestart in goldengate
Hi
We feel goldengate setup 11.2.0.1.17 between oracle rac db versions 11.2.0.4 on Linux platform.
We try to action script configuration via ggsapp to start/stop service automatically all processes.
We had met these 2 settings, but had concerns.
As mentioned in the footnote GG,
AUTOSTART
parameter to start one or more extract and Replicat automatically treats to start Manager.AUTORESTART
parameter to start the process of one or more extract and Replicat be restarted by Manager after a failureDuring the test, I had stopped one of extract manually and it did not come automatically. This seems to fix it for me
as autostart will take effect only when the Boot Manager and automatic restart will only work when the process gets failed.
There is no setting that can reveal the process automatically if its stopped manually except some shell script with a code.
Please correct me.
Also there will be any impact to any situation if we add autostart in mgr.prm
Thank you
Ashish
Hi Ashish,
Yes, you are quite correct.
AUTOSTART - to start the process once the process of the Boot Manager. You don't want to start each process individually once after the start of the process manager.
Restart AUTO - initially one or several processes that are stopped because of the failure. You have all the options like the below for use with AUTOMATIC restart settings.,.
Number of ATTEMPTS
Minutes WAITMINUTES
Minutes RESETMINUTES
We stop the process manually for some maintenance work or if you need to make some changes to the extract / replicate settings.
Manual stop is clean. It is not a failure. Why you need to start the extract or replicate automatically when you stop it manually for all maintenance or changes?
Kind regards
Veera
-
How to disable the autostart (application) when restarting the server managed?
Hi Ppl,
How to disable the autostart (application) when restarting the server managed?
I want that some apps do not stay started. In WebSPhere, we have an option to disable auto-start for the application.
I don't find in weblogic.
Thank you
You can force stop the application before you restart the server.
-Faisal
-
Question of Scripts Autostart real quick and easy.
Is it better to have 2 or 3 automatic scripts begin with Indesign or should I combine them into 1 Script? And if several scripts from at the same time is not serious there at - there a limit to how much I should AutoStart?
It will issue, if you want to run scripts in different target engines.
Then, you must do this in another file.Or if you want to keep the functions of modular script and start them from a main script with doScript() or the include statement pointing to script files somewhere on the system of file/folder of your machine.
There are many scenarios. As always: it will depend on ;-)
Uwe
Maybe you are looking for
-
Have just iPhone 4S. Can't sync contacts from my iMac/iPad?
I try to sync the Contacts from my iPad and iMac for my newly purchased (used) iPhone 4S. When I go to iTunes on Mac, I offer "iPhone sync" and then nothing happens. I guess it's possible? The Mac has v 10.11.16, and the iPhone has 9.3.5. It doesn'[
-
I can not find where to change the privacy and security settings.
I looked towards the top of the article about what said you to check / uncheck the boxes, but don't tell me where these boxes are.
-
All the places in the United Kingdom with the Z store bike?
Don't know if it's in the right forum, but I would have a real phone idea, even if this isn't a deal breaker...
-
output HDMI does not...
my friend connected a printer on my computer yesterday I'm using a desktop gateway computer and after they hung now my hdmi output does not work and I can't watch my programs from my computer on my tv... someone knows how to fix this? When I plug or
-
Hi, I want to change the color of the text in drop-down list because I want to set background color. How to do this? Thank you