AVG and WINDOWS SECURITY problems 8
Since the installation of Windows 8 Pro, the operating system is not recognizing my AVG Internet Security 2013 and Red Guard scoring only two windows and
AVG Security are turned off.
When I try and turn on AVG, nothing happens. The AVG Control Center is showing that my computer is fully protected, and all systems work
correctly.
As a temporary measure, I can turn off all Windows follow-up or activate the Windows Firewall and defender. I currently use the latter.
I worked for a while with the support staff AVG, which were extremely useful, but we all verification, we can. Their point of view is that it is a
Problem of Windows 8, because it worked perfectly under Windows 7 Home Premium, and I agree.
I would be extremely grateful if anyone can shed some light on my problem.
FYI main Hugh Parker my e-mail address is * address email is removed from the privacy *
I had this problem too. I looked and looked for a solution without success. But there is a simple solution that I accidentally discovered the problem.
1. go in Control Panel > administrative tools and run Disk Cleanup
2 when the disk cleanup is finished to calculate how much space can be freed, click Clean Up system files.
3 disk Cleanup recalculates and when to ensure that there is a check mark next to the Windows Clean-up update.
4. click OK (depending on the amount of the Windows Update files to clean it can take some time.)
5. When this is done, restart your PC/laptop.
The problem should be solved, at least it was for me, if there is no 100% guarantee.
Tags: Windows
Similar Questions
-
A.V.G. IN INTERFACE WITH M.S.
* original title - A.Programs compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs *.
If your computer is actually turn off and isn't just pass in "Sleep" or "Hibernation" during a scan, and this happens only when you run an analysis, then I must say that yes there is a problem with this security on this computer suite.
Personally, I'm worried about the security suites. They developed gradually bigger and bigger, which requires more system resources, and when they fit well with a particular operating system, they can interfere with its normal functions. My preference is to use a good antivirus and Windows Firewall.
-
Trend Micro AntiVirus and Windows Security Center are contradictory among themselves
I got a message from Windows Security Center that says that Trend Micro AntiVirus related my malware was not turned on. I clicked on the button and nothing happened. I opened my window to tend to discover that all systems were on and protected. Just in case, I began my analysis of virus and it worked for 3 and a half hours now and it registers only 10% full... something is wrong?
Hello
Some antivirus/security products may cause this error. McAfee, Norton, Windows Live
OneCare, Threatfire are some. What antivirus/antispyware/security products do you have
on the machine now. And who did you NEVER got over it, even if you have uninstalled them. (These
Let the remains that cause strange problems). Therefore a number in your case.Check the default services and dependencies to ensure that they are running.
http://www.blackviper.com/WinVista/services/Security_Center.htmSecurity Center not related anti-virus or firewall State correctlyhttp://www.winhelponline.com/blog/security-center-not-reporting-anti-virus-or-firewall-status-correctly/
How to fix Vista Reporting incorrect information Security Center
http://www.Vistax64.com/tutorials/195736-Security-Center-not-reporting-correct-information.htmlHow to disable or enable the Security Center in Vista
http://www.Vistax64.com/tutorials/67737-Security-Center.htmlThis thread might help as it might be a permissions problem.
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/3d2049ae-4581-439b-8E15-3f603f5c60f0/=====================================
TrendMicro seems to cause a lot of problems lately then you might think about switching.
Download replacements, but do not install until after the withdrawal of those present
and reboot.For any need to use this method:
Download - SAVE - go to where you put it-click on - RUN AS ADMIN
Instructions/TrendMicro removal tool
http://eSupport.trendmicro.com/1/How-do-I-remove-old-or-new-versions-of-trend-micro-products-in-my-comp.aspxHow can I uninstall my Trend Micro program removal tools fail?
http://eSupport.trendmicro.com/pages/how-do-I-uninstall-my-trend-micro-home-and-Home-Office-program-if-the.aspxList of tools to clean/uninstall anti-malware programs
http://answers.Microsoft.com/en-us/protect/Forum/protect_start/list-of-anti-malware-program-cleanupuninstall/407bf6da-C05D-4546-8788-0aa4c25a1f91------------------------------
Here's what I use and recommend: (these are all free and very effective versions.)
Avast and Prevx proved extremely reliable and compatible with all I have
launched on them. Microsoft Security Essentials and Prevx have also proven to be very
reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.Avast Home free - stop any shields is not necessary except leave the file system, Web,.
Operational network (Script and behavior are also recommended in Ver 6 +).Prevx - Home - free
Windows Firewall
Windows Defender (is not necessary if you use MSE)
Protected IE - mode
IE 8 - SmartScreen filter WE (IE 7 phishing filter)
I also IE always start with asset if filter InPrivate IE 8.
(It may temporarily turn off with the little icon to the left of the + bottom
right of IE)Avast - home - free - 7.x stop shields you do not use (except files, Web, network, &)
Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
disabled - click OK
http://www.avast.com/free-antivirus-downloadOr use Microsoft Security Essentials - free
http://www.Microsoft.com/Security_Essentials/Prevx works well alongside MSE or Avast
Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp?prevx=Y<-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspAlso get Malwarebytes - free - use as scanner only. If you ever think malware and that
would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
(not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
never find anything of note that I started to use this configuration.
http://www.Malwarebytes.org/products/malwarebytes_freeI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
I started having a problem in email, no mater what browser, access a site I frequent. When I click on the link to access the site, a Windows Security window will appear asking you to my login information. I get the info and the popup just keep reappering, won't let no can visit his profile. I have gone to Internet Options, Trusted Sites and entered the url of the site, but I am still unable to cross the popup via email or direct research at home or log in page. If I go through the context menu, sometimes just with a 404 error. What can I do?
Thanks, I found the problem. Was able to contact the site via their Facebook page, reconstruction of the site, so that all attempts to access to are refused until it is back up and running.
-
Hey guys. I looked up and down for a solution to this problem.
I already tried this solution:
http://blogs.technet.com/b/asiasupp/archive/2011/12/27/error-code-0x80070424-with-Windows-Firewall-and-quot-base-filtering-engine-service-quot-not-available-in-services-database-list.aspx
Although the only problem is at last step when I turn on the firewall Windows or WSC (windows Security Center) since neither of them are present
in the list of the services.msc.So here I am without any windows security, no firewall and no updates. I really need help here. I was attacked by malware, a day ago, and everything happened after that. I removed the malware with program ESET NOD, but it seems that the malware corrupted my registry/safety inputs.
Thanks in advance.
Hello
I suggest you run both the fix that he mentioned below and check if it helps!
· Resolve security issues to protect and secure Windows automatically
· Automatically repair the settings of Windows security to secure your PC
I hope that helps!
-
PSC 950xi and Windows 7 problem: not all pages are printed
This problem has been reported by other at least 2 x in the past, go back for 2010, but there is no satisfactory solution that worked for everyone. A real difficulty should not be available now?
My PSC 950xi printer works perfectly with Windows XP. Then I got a new laptop with Windows 7 and the 'good' HP driver has been installed automatically, as described in your Web site. But now most of my impressions are incomplete; only the first part of the document is printed, and the last printed page is reduced by half. Sometimes nothing prints. "Error" appears in the print queue, and I have to cancel the document to even try another impression (which then often does not work). I tried reinstalling my driver, as explained by HP, but without success
A user suggested defining the "printer" HPCPP118 (RAW data type) processor (printer properties > advanced > Print Processor). It worked for him. However, it is not possible for me (and at least one other user) because the only available print processor is winprint.
I hope you can help. PSC 950 is not on the list of printers HP can't stand not (at least not on the list I've seen online)
It seems to have solved the problem (1) Control Panel/hardware and Sound/display devices and printers, then right clicking on my printing device and select remove device. T (2) with printer, I unplugged my USB connector and then plugged back in and Windows 7 found the right printer driver automatically. (3) I had to wait a period of time (less than a minute) for the printer (re) - added to appear as the device by default and with the right image. (4) I never chose "Add printer" at all; Windows 7 was able to add a new when the USB connector is connected.
-
Pop up Windows Security problem
Hello
Whenever I try to install any application, Windows security appears and asks me to type the user name and password to install, however I can't type anything in English suddenly, only local language available.
Please give me some advice.
Thank you
Hello
You are connected to the domain, there may be restrictions with your administrator. It would be best to contact your network administrator or post in the TechNet forums.
http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads -
Satellite A200-1 and Windows 7 problem - function button does not work
I have computer does model no A200-1The and windows Vista for windows 7 32-bit, I changed a moment my function button does not work.
What should I do now? Maybe someone greet me some player? Please help me I can use my driver.
Do you mean the FN key or what?
> Please help me I can use my driver.
My English is also not the best but what do you mean with driver? -
AVG and microsoft security essentials
Hi, I got my laptop to explicit memory service, they have installed Microsoft Security essentials, it check for viruses, etc.. I wonder this conflict situations or cause problem with my protection of AVG. Thank you... Dave
Dave
It can lead to conflicts and can allow the same malware app aims to prevent. I pick one and delete the other. If it was me I would remove AVG
I notice that you have of moy.
AVG can be a cause of BSOD.
Please remove and replace it with Microsoft Security Essentials
http://www.Avg.com/ww-en/utilities'] download tools and utilities | AVG worldwidehttp://www.Microsoft.com/security_essentials/ "] Microsoft Security Essentials - free Antivirus for Windows"
-
Problems with the Windows and Windows Update problem of Installation of KB2416472 component.
Original title: I use SFC. EXE
Error detected
How can I fix this, or I have to re - install window again.
CSI 0000015a [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
The same with 0000015c detail above.
00000309 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
2010-10-08 12:35:51, CSI Info 0000030b [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
2010-10-08 12:35:51, CSI Info 0000030 c [SR] this element is referenced by [l:158 {79}] "' Package_16_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 49_neutral_GDR" "00000367 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
2010-10-08 12:38:13, Info CSI 00000369 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
2010-10-08 12:38:13, CSI Info 0000036 [SR] a the item is referenced by [l:158 {79}] "' Package_16_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 49_neutral_GDR" "
2010-10-08 12:38:13, CSI Info 0000036 c [SR] full repairHaving a problem with the Update window for
Update of security for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2416472)
I followed the recommendation, that nothing has changed.
Download size: 4.7 MB
You may have to restart your computer for this update is taken into account.
Update type: Important
A security issue has been identified that could allow a malicious user to compromise your Windows system that is running the Microsoft .NET Framework and gain access to information. You can protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer.
Thank you
Hello
Problems with the Windows Sidebar?
It seems that the problem is related to the Windows Sidebar. Remove all third-party sidebar gadgets if
Follow these steps and check if it helps.
Logon as administrator-
a. If the sidebar is running - make a right click on the sidebar near the lower clock icon right in and out
b. Click Start - Type "CMD" in the search box - find top - right click it and run as administrator.
c. replace C:\Program Files\Windows Sidebar by copying and pasting this command->
CD C:\Program Files\Windows Sidebar
d. press enter (this is assuming that your sidebar is on C:, otherwise use the letter of the drive is on)Guest should be--> C:\Program Files\Windows Sidebar >
e. then copy and paste each of them following their tour to enter
regsvr32-u sbdrop.dll
regsvr32-u wlsrvc.dll
regsvr32 atl.dll
regsvr32 sbdrop.dll
regsvr32 wlsrvc.dll
Sidebar should now work.
Also if you scan SFC does not fix a corrupted system file, you can follow the steps from the link below.
Look under "'If the System File Checker tool can not repair a file, proceed as follows :" "
As with regard to the installation of KB2416472, to install this hotfix, you must have Windows Installer 3.1 or a later version installed on the computer. To get the latest version of Windows Installer, see the following Microsoft Web site.
For maore information, see: http://support.microsoft.com/kb/2416472Aziz Nadeem - Microsoft Support
[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
Properly requested and authorized security problem blocks content in Firefox
Hello
Since the upgrade to Windows 10, I am desperately looking for a way to debug - currently, out of the four installed browsers, only Firefox supports debugger player correctly...
That would be ok, except...
For Firefox and only for Firefox, when using the debugger last plugin, content applications outside the domain container fail with a violation of security without even _attempting_ read the crossdomain.xml valid (and available) for this resource.
In FIREFOX, I can read XML of RSS. < DomainName > where I have RSS. < DomainName > crossdomain.xml in place
In FIREFOX, I'm IMPOSSIBLE read JPG img. < DomainName > despite his img. < DomainName > crossdomain.xml in place
In subject the other browsers, all assets are properly requested and displayed correctly.
HOW CAN I FIX?
G
PS: in the case that it is important; Win 10 to 64-bit.
OK, so what we have done to resolve this;
1 eliminate root - entry TGV on our well field force redirection to HTTPS
2. on machines where the HST problem has been cached and cannot be resolved by the Firefox article.
2.1 uninstall Firefox
2.2 remove all traces of Firefox - remove C:\Users\
\AppData\Local\Mozilla and C:\Users\ \AppData\Roaming\Mozilla 2.3 reinstall Firefox
Then...
That sucked.
-
Satellite U500 - Eco utility and Windows activation problem
Hello everyone
I'm having some trouble with my satellite U500. Recently, I had to reinstall windows on my laptop and the problem is it not activate because of my motherboard was replaced some time ago (I have no more a recovery partition). I want to know is if it is possible to make it work again with recovery Toshiba dvd or by any other means.
The other problem involves toshibas eco utility. Whenever I try to install it im getting an error message empty all I can do is click ok and then the installation is aborted. If someone had issues similar or is able to help me I would really appreciate it thx in advance. :)
If you have original Toshiba Recovery disk use for installing Windows. Recovery image is already enabled, so it shouldn't be a problem. If you use a clean version that is another story.
I hope that the Toshiba service provider has replaced the motherboard correctly and rewritten DMI information.
Use please recovery disk and recovery image. This recovery image contains all of the tools of Toshiba and utility and all must be installed correctly including eco utility.
-
Lock screen Satellite A100-153 and Windows login problem?
I installed Windows XP Pro with Service Pack 1, everything worked fine, but when I updated the BIOS to 1.40 (WIN) at least once a day connection Windows crashes (I can move the mouse, but can't click on my username to type the password, alo TAB key does not work). Also, now when I press the key combination Fn + F1 to lock the screen, sometimes (not always) I can't go stay right back to the black screen!
Someone knows what can be a problem?Hello
According to these document Toshiba BIOS FAQ update of the BIOS can be done with 2 different procedures:
IOS http://eu.Computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?z=234&service=eu&from=faq_selection&CFID=B & FID = TRO0000000b07It is possible that you have useed the wrong or bad BIOS BIOS update procedure.
Well, it's not easy to say why the connection of the laptop freezes. The fact is that the Satellite A100 is a laptop very new and it comes with all service packs Microsoft (SP1 + Sp2). I don't know whether you have installed the device manually, but you must use the Toshiba Recovery CD.I would recommend recover the laptop with the Toshiba Recovery CD and finally, you check to see if the connection problem.
-
Update the BIOS and Windows Update problem
Hello
I have a Pavilion laptop g7-2017us running Windows 7 Enterprise. October 18,2012, HP maintenance program informed me that he had to update my BIOS. HP maintenance program had not updated of the BIOS. See my BIOS is F.08 (dated 03/05/12). Manually, I been looking for the latest BIOS and found that it was identical to what is installed on my computer. It seems that software of diagnosis of HP gave me false alarms.
Question #2: I periodically install updates to Windows. I saw my story updates and found 2 failed: one who is 'recommended' and the other 'Important '. I looked at the error code and they are all two "80004004. I did google search and learned this is very serious problem b/c Windows is damaged. I tried using Microsoft 'Fix It', but it doesn't seem to help. Anyone have any suggestions on what I should do?
Thank you
Jeff
Open an elevated command prompt and type of each of these commands, press ENTER after each command, key when done try windows update in Control Panel. Don't forget to include spaces.
net stop wuauserv
rmdir /q /s %windir%\SoftwareDistribution
rmdir /s /q %windir%\system32\softwaredistribution
regsvr32 /s c:\windows\system32\wuaueng.dll
regsvr32 /s wuaueng1.dll
regsvr32 /s atl.dll
regsvr32 /s c:\windows\system32\wups.dll
regsvr32 /s wups2.dll
regsvr32 /s wuweb.dll
regsvr32 /s c:\windows\system32\dllcache\wucltui.dll
net start wuauserv
-
DMA2200 and Windows 7, problem to connect
Hello
I used the DMA 2200 per year + with Vista 32-bit, version of PH, with no problems (major...).
Now I have a new install of Windows 7 64 bit, also Home Premium edition.
It seams like there is a connectivity issue between the DMA and PC.
PC detects the DMA and I start configuring the Extender, it works fine until the Extender needs to connect to the PC (according to the user interface, get a warning and error in the log events for the Media Center, have not found a page to decode, but I think it's a timeout).
Someone at - it had the same problem and found a solution or have any idea what to do.
Now I have to move my old Disc (via BIOS) Vista (recorded the Disc boot... * beep * chance) and between the new disc of Windows 7.
Finally managed to do work.
I guess that something wnet wrong in the initial configuration.
Noticed that when you run > netstat - a
port 3390 was not included in the list.
Removed the user from the Extender, changed the name of the computer, etc. etc. (do not know what solves the problem), but suddenly the port 3390 was in the list (I think it's the port where Extender tries to connect to the PC).
Now the Extender installed smothly and * beep *, now the Extender works really well, faster then with Vista, this is how it was supposed to work initially, when the extension has been put on the market. Unfortunately I think that extenders have a difficult time in the market.
In any case, I am very satisfied with the Win7 - performance of the Extender.
Maybe you are looking for
-
iPhone 4S does not password wi - Fi. No data in the IP ADDRESS fields
I have iPhone 4S and recently updated to, ios9.3.1. My wifi will not accept the password. I have restarted and also forget this device but to avail. No data is in each of these fields on the section of the IP address of my wi - Fi under settings. M
-
Ethernet not working not not on desktop slimline
Hello. I have a HP Pavillion Slimline S5310y I had a power surge, the PSU burnt and a few weeks ago. I replaced it with ATHENA AP-MTFX-30 and authorities on the good and everything works. However, I couldn't connect to the internet. It connects using
-
OfficeJet 3830: dialog box for the scanner
Just replaced an Officejet 6500 with an Officejet 3830. The 6500 had a dialog box analysis from the top of the office, which showed levels of ink and scanner options. The new 3830 seems not to have this. Is there a way to get this dialog box for t
-
How to set a property for all of a type of control in a cluster, by programming?
Good afternoon everyone, I have a couple of clusters on my front, each consisting of 7 rings, 7 LEDs, numbers 7 and 7 channels... all the controls. There is a left and right cluster of these... but just focus on the left one to play with... specifica
-
How to activate windows vista family premium 32-bit when my 25 character product key isn't accepted I tried for a week to get help I downloaded ie8, because there has been no help offered there at - it a download to fix this? I also need a mass stora