back up the same system

Similar Questions

• You can install AAMEE 2.1 and 3.0 on the same system?

  I ride a limited trial of CS Suite 6.0 and have used the 3.0 to package the files.  Everything went smoothly.

  However I had to roll a new depolyment of my suite 5.5, and it seems that the AAMEE 3.0 has replaced my 2.1

  Question 1: You can use 3.0 to package Creative suite 5.5?

  otherwise:

  Question 2: 2.1 AAMEE can live on the same system as AAMEE 3.0?

  All of the systems in question are Mac OS X 10.6.8 or 10.7.4 all upgraded to the latest versions of the software.

  Thank you very much.

  John Gibson

  Hello

  AAMEE 3.0 does not have the Creative Suite 5 media or media family Creative Suite 5.5. You must use AAMEE 2.1 for CS 5 or 5.5 CS media.

  AAMEE 3.0 should be used for the media of the Creative Suite 6 only.

  AAMEE 3.0 and AAMEE 2.1 must be installed on different machines. They cannot coexist on the same computer. In addition, once you have installed AAMEE 3.0 on a computer you can't go back and install AAMEE 2.1 on it. Thus, you must use a new machine to install AAMEE 2.1.

  Thank you

  Rajindra kokola | Member of the technical staff. Adobe Systems

• Then the family goes back to the same iCloud account?

  Then the family goes back to the same iCloud account?

  No. No, unless you share an iCloud account, which is a bad idea.

• Laptop HP 15-af157na: new laptop - how do I back up the operating system until I use?

  You just bought a laptop and PC World told me to back up the operating system before you start to use it on a pendrive of 32 GB, but because he wanted to sell their service, he refused to give me any indication on how where to start!  Should not be difficult.  Stupid how they do not include the cs as they did.

  Someone help please?

  Thanks for the comments.

  Glad to have been of help

  Feel free to post back. Please mark the thread/post as accepted solution to possibly help other users who search the forum for similar problems. Good day!

• Apple Extreme, Time Capsule and Express on the same system, what is the best way to set it up so that all devices smoothly from one end of the House to another?

  Apple Extreme, Time Capsule and Express on the same system, what is the best way to set it up so that all devices smoothly from one end of the House to another?

  I'm going to assume that you plan to have wireless devices.

  Let's say that the Capsule is your "main" router  If this is the case, then it must be located in the House, so that the distance between the time Capsule is the same for the outside walls of the House.

  Then, on the 'left' side of the House, looking for an airport to midway between the Capsule and time of the outer wall of the House. Do the same thing the 'right' side of the House.

  In other words, each of the two airports that "extend" the wireless signal are located at equal distance from the Capsule of time... but they are in opposite ends of the House.

  If you intend to interconnect all the airports and Time Capsule using a permanent, Ethernet wired... which by far is the 'best' way to put in place a network in terms of performance and reliability... then you can locate one of the devices anywhere you want.

• Integration of material NI_DAQ and NOR-DAQmx software on the same system PCI-DIO-96

  Hello

  We have a great system that is developed in VB and uses the traditional inherited NOR-DAQ system. The system controls the controller PCI-DIO-96. We would like to upgrade to some parts of the system to NOR-DAQmx and use VB.Net and we know that you can install both systems together on the same computer.

  We have a few questions:

  (1) once the legacy of NOR-traditional DAQ OR DAQmx software can be integrated in the same system. Some parts of the system will always use the VB and the other parties will use VB.Net.

  (2) if the answer to the first question is Yes. Are there hardware or software limitations? Is there a recommended way to integration?

  (3) are there articles based on the knowledge about it?

  Thanks Jeremiah

  There are a number of limitations to the use of NOR-DAQmx and NOR-DAQ traditional at the same time.  First of all, only one of the drivers can access the device at a time.  To switch between the drivers, I recommend that you read this knowledge base Article: that I can use OR-DAQ traditional (old) and NOR-DAQmx simultaneously?  You will need to use the equivalent functions of VB .NET to switch between the pilots.

  In addition, the system should use Windows XP or an earlier version.

• When you click the back button in Internet Explorer, I went back to the same page, I am already on. Problem seen in Google search engine.

  Problem seen in Google search engine.

  I used Google for years without problems - I work from home as a freelance journalist.  But this last few days, if I search for something on Google from IE and click on a result, I can get the page I want upward.  But then, if I want to go back to the same Google search page to check the other results, I can't go back by clicking on the button 'back' at the top left, as I always did.  If I click it, it just keeps returning me to the page I'm already.  I find no mention anywhere using this problem or any means to remedy.  If I have the cursor hover over the arrow bak, the address of the current page appears rather than the original Google search page, so there is obviously something wrong.

  Thank you

  Hello

  1. This only happens with Google?

  2. don't you make recent changes?

  I suggest you to follow these steps and check if that helps:

  Method 1:

  Try to run Internet explorer mode without modules and check to see if the same problem happens:

  http://Windows.Microsoft.com/en-us/Windows7/Internet-Explorer-Add-ons-frequently-asked-questions

  Method 2:

  Try to optimize Internet explorer and check to see if it helps:

  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

  It will be useful.

• Windows XP 07 login I get the black and white screen where is safe mode option and then just loop it back to the same screen.

  When I powered on my Windows O.S. ' 07 I got the black and white screen where the option of safe mode and when I entered beginning that normally he just came back to the same screen of the suggestions?

  Hi RudyNY,

  1. you have Windows 7 or Windows XP installed on the computer?

  2. you receive an error during the process of loop?

  3. did you of recent changes on the computer?

  4 when was the last time it was working fine?

  Check to see if you can boot into safe mode in the Advanced menu options and the last good known Configuration.

  http://www.Microsoft.com/windowsxp/using/Setup/support/nostart.mspx

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

• can I use a serial key to install two windows 8 in the same system

  If I double boot windows 8 on the same system. for activation, I use the same key for the two installation.
  is this possible?

  Hello

  Windows 8 comes with only on product key (license) that can be activated on a computer at the same time. If you want to enable another computer with him, then he must be uninstalled from any other computer first.
  The fact above, as I know, the installed on another partition of Windows 8 will become the second computer and unfortunately you can not use the same key.
  Hope this helps, good luck :)

• Production Premium CS5 and CS6 running on the same system / all problems?

  Still not sure which way to go by the version of upgrade, not creative cloud CS6...

  Running both on the same system or uninstall CS5 first...

  Prefer not to slow down the system but CS5 works perfectly now...

  Anyone tried both at the same time?

  How is opening existing projects of CS5 with CS6, it is a concern to me, and why I would like to have both installed on the same system?

  After you have installed the CS5, CS6 and CS5.5, CC is not a problem. They are separate installs.

  Projects of CS5--> CS5.5--> CS6--> CC is not a problem.

  It is not possible to move CC--> CS6 projects.

  CS6--> CS5.5 mobile projects can be problematic.

• OBIEE 11.1.1.5 and OBIEE 11.1.1.6 Installation on the same system.

  Hi all
  
  Is it possible to have OBIEE 11.1.1.5 and 11.1.1.6 on the same system?
  
  I know that it is not practical and some kind of thing to make public. But we have a 11.1.1.5 OBIEE instance installed on a server. And we do not want to uninstall it. On the contrary, if possible, we want to install 11.1.1.6 with this 11.1.1.5 OBIEE instance.
  
  Also, is it possible to have OBIEE 10 g and OBIEE 11 g on one system?
  
  Thanks in advance...
  
  Dev.

  Hello

  Never get tired... I hope its possible only... do something once finished obiee11.1.1.5.0 with default port (9704,7001), and then try again to install obiee11.1.1.6.0 (from other ports and different drive) as a method of configuration manual port...

  can I know what lens do you need them both in the same pc?

  Thank you
  Deva

• Multiple instances of ColdFusion Builder on the same system?

  Hi people,

  Four of us working remotely in my company.  It is not uncommon for use us to all the remote desktop in a system reserved for our use and three of us CFEclipse at the same time.  We have recently installed ColdFusion Builder on this system and found that it would only allow a single instance of ColdFusion Builder to run.  When you try to start a second instance of CFBuilder would show the screen flash and then nothing more.

  Is anyone aware of workarounds or other changes that will allow us to run multiple instances of CFBuilder on the same system?

  Thanks in advance,

  Thomas Woestman

  Will address this issue.

  But for the moment as a solution, when you want start generator CF if there is file .bolt please remove the .bolt of

  C:\Program Files\Adobe\Adobe ColdFusion Builder\. And you will be able to launch even while the other kept open.

  Thank you

  Krishna

• CS2 & CS4 Extended on the same system

  I downloaded the CS4 Extended trial but do not uninstall CS2 before that. These two cannot exist on the same system without problems?

  Thank you!

  Yes. I have Photoshop 2.5.1 6 PS, PS 7, CS, CS2, CS3, CS4 all play nice together on the same machine.

• installation of 10g and 11g on the same system?

  I have Windows XP and you have installed the database 10g. Can I install 11g on the same system and I need to use one of the database?
  
  Thanks in advance.

  As long as you succeed ORACLE_HOME correctly to work on your different databases, having more than one version of Oracle on a server is not a problem.

  Nicolas.

• Windows (vista) could start even in safe mode. disk repair and system restore do nothing. all comes back to the same error screen

  Windows Boot Manager

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windows installation disc and restart your computer.

  2. choose your language settings, and then click "next".

  3. click on "repair your computer".

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  File: \Windows\system32\config\system

  Status: 0 x 0000225

  Info: Windows could not load because the system registry file is missing or corrupt.

  Enter = continue or esc = exit

  I put in the repair disk and need to "select" system none were so I click Next and let it run for the night, about 12 hours later the blue progress bar was still in progress on the same window so I guess it doesn't work anymore. I would like to reinstall windows, but I can't drive to format...

  Go into the BIOS

  Then look for boot options, or boot order
  Change the boot order to boot from the CD / DVD rom (i.e. does not start from the HD, boot from the cd to install disks).
  Now you can do a full reinstall but that your last resort.