Backflip: Connected to a wi - fi network working but with no link

Similar Questions

• Wireless networking works, but cable dose not

  My NAT type has been closed and I opened my router page to see if the ports are open, they were not, but the fact is that I've wound up with making a single change to routers setting but now my wired connection does not work but my dose wireless. I have reset the router, the modem, does a system restored, reset the switch and no change. Internet pages just load and load and never expire while my wireless works fine, I do that through my phone, so I'll try to give you this info I can but if I have to type all of this will take a while.

  Windows 7 32 bit
  Time of modem Warrener (brand name not sorry)
  Linksys e1000 router
  And switch ezxs55w
  Let me know what information you need.

  Hello

  Do you receive an error message or error code?

  Try the following and see if it helps.
  
  Method 1:

  Run the Windows 7 network troubleshooting. http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  
  Method 2:

  In the Windows wireless network connection problems:
  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows?T1=tab04

  Problems in Windows wireless and wired network connection:http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

• Ethernet cable to connect my windows laptop 7 to the internet. connection is very bad. It works but only for 30 minutes max.

  My internet does not work correctly. I use an ethernet cable to connect my laptop (using windows 7) to the internet. However the connection is very bad. Sometimes it works but only for 30 minutes max, and other times it does not at all, connect saying that the cable is disconnected. I tried 3 different cables to 2 different ports, then maybe the problem comes from my laptop. It connects to the wifi networks fine but not with the cable. Does anyone have any suggestions as to what could be the problem and how can I solve this problem?

  Hello

  1 did you changes to the computer?

  2 did you receive an error message?

  Method 1:

  I suggest to check and make sure that all cables are connected correctly.

  Method 2:

  Check the link and try to run the troubleshooter to check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

• My local network works, but why I can't ping? LAN works but not internet. A simple quest to the Jedi.

  Hi all!

  I have weird problem and I hope some of you can enlighten us if necessary.

  The background:

  My OS is Windows Vista Home Premium SP 2.   One day, I installed an application proxy - ProxyCap - as a free trial for 30 days.  The application installed a few dll Winsock provider.  After the 30 day trial, I uninstalled the app.  Then the problems started.  Even if the application proxy has been disabled, regular internet links have been completely normal and not affected.  It was only after uninstalling the app that I have problems.

  The problem:

  • The computer is unable to connect one more to any website using the browser.
  • My local network seems to be fully functional, which involves a problem of setting the software.  I say that my LAN is functional if I am going to sign--> Network and Sharing Center--> view status and look under the "Activity" section, I see the link send and receive packets without problem.
  • If I go into control panel of--> Network and Sharing Center--> view status of--> diagnosis, I get the message: "cannot communicate with DNS Server (xxx.xx.xxx.xxx) Network Diagnostics ping to the remote host, but has not received a response."
  • Indeed, if go to start--> cmd and ping my DNS server, I get a general failure for all 4 packets sent.
  • However, I am able to ping my localhost to 127.0.0.1

  My settings:

  • My ipconfig/all output: http://pastebin.com/Ksn2k2ja
  • DHCP is enabled.
  • For the properties of connection LAN--> Internet Protocol Version 4 (TCP/IPv4)--> properties, I 'IP automatically get an address' and "Obtain DNS server address automatically" selected.
  • The same goes for--> Internet Protocol Version 6 (TCP/IPv6)--> properties.
  • The Sysinternal autoruns--> tab providers Winsock application, tells me that I have the "Hello Namespace Provider' active as a WinSock2 registry entry. It is mdnsNSP.dll and published by Apple Inc..  Who was present before installation of the proxy, and this is for iTunes.  Screenshot: http://i1300.photobucket.com/albums/ag86/applemeetworm/winsock_zpsb41ca872.jpg

  What I tried:

  • I tried to reset Winsock for Vista by clicking Start--> cmd and type netsh winsock reset , and restart the computer.
  • I tried to reset the TCP/IP stack by clicking Start--> cmd and type netsh int ip reset c:\resetlog.txt and restart the computer.
  • Restart my router.
  • Deactivation and activation then my connection to the local network.

  Thank you all for helping me with my problem.  I would be happy to provide more information as needed.  Thanks for the research and thanks offering solutions.

  See you soon!

  Hi all!

  I contacted ProxyCap and support staff has been able to solve the problem.

  Apparently, one of my entries in registry Winsock2 (Winsock2, Namespace Catalog5, 5 catalog entries) has been disabled somehow, uninstalling or in my first attempts to address issues after uninstall.

  Thanks to ProxyCap and for other people who have tried to help.

  ~ Congratulations ~.

• I am using windows 7 and my computer laptop wifi does not connect to the modem. It worked correctly with the other modems. I had the prob with the new modem provided by optus. can someone help me please?

  my computer laptop wifi works with other modems. and my modem works with other laptops. they have one problem with each other.

  I don't know why, please help me...

  Hello Omar.

  Thank you for keeping us posted.

  It seems that you did not try the method 2 and 3 after running the troubleshooter from network. Please, try it both ways and see if that solves the problem.

  Reply with the results. We will be happy to help you.

• MacBook Pro the Spill - currently work but with minor problems

  As the title indicates, about three weeks ago, I spilled tea on the left upper quarter of my keyboard close to the ESC key.  The laptop immediately power off and because of cracking noises that sounded not good.  I put upside down and let the water dry for a few days then put Kleenex tissue on top of the keyboard and shut up for one more day.  I turned it on the next day (stupid I know but I am a student, he uses it often) and it showed a folder flashing with an exclamation mark on the subject.  I immediately turned off and he let it harden for three days.

  I left for the weekend and I tried it turn and surprisingly it works fine.  I was able to connect and saw the splash screen and shortly after it stops immediately again.  I let settle again for a few days and tried again and this time it has begun well.  The Macbook has worked for the next two days, however, I noticed two things:

  (1) just below the trackpad, from time to time would make noise very hard and rough, sounding like two things rub together.  It's a very unpleasant noise, and even if it isn't that strong, it is noticeable and certainly doesn't sound good.

  (2) on almost all of my keyboard are a few bumps on each key, almost like the dried water particles, however, they don't come off the coast.  If you rub them completely off it tears the part of the key and a layer of the current key will detach a black space on the key.  I realize it's not big problem, however, do not know the cause of what I will not be spilled tea on all keys.

  I took my computer to the Apple store, and they told me that everything works well.  Every thing in the Macbook got a green check mark when they tested and they said it worked perfectly (crazy, I know.).  They said that there was no problem and I could continue to use it as usual.  However, the genius bar apple guy said, it was the first time ever, he saw the bumps on my keys, however, he said, it's fine that you can't even feel them when entering.  However, only two days after a visit to the apple store, my macbook stopped on me when I was with her.  I tried to power it back on and it became like a safe mode where I was asked to select the HARD disk drive (I think).  I don't have an option to make attempts so and after a lot of google, I thought that my Macbook was done for good.  However, as I was on the phone with apple support, not even an hour later, at random, he started to work very well and worked well since the incident.

  Now, this is where I ask my question, because my computer is still random scratch harsh noises under the trackpad, should I worry or continue to use it?  These sounds are completely random and sometimes it happens at all for a day and then sometimes will get 5 to 10 a day, during anywhere from 3 seconds to 20 seconds of scratching and noise.  In addition, suggestions on the keyboard?  I know this isn't a problem, but it's just a little weird on the keyboard and to be completely honest, baffled myself and the representative of apple engineering.

  Thank you very much for your help!

  You should be worried about. Liquids and electronics don't go together well. Damage may increase to erode over time as components. Make sure that you have a backup of all your data because your computer can die at any moment. As you work back up your data continuously for the same reason.

• With the front camera, microphone does not work, but with the camera back, it works fine. Please give me solution

  whenever I have to video chat with anyone with front camera on they won't listen to me. Even when I record with fromt camera microphone does not work with the camera back, everything works correctly and even with siri, I can't talk more but when I take a call they can hear perfectly

  Get help with microphones on your iPhone, iPad and iPod touch...

• My speakers do not work, but with a helmet, I have sound for a HP 2009 M and Windows

  My speakers have suddenly stopped working, even though I have no sound with headphones.  I have an HP 2009 M.

  Hi DawnHebert,

  1. you remember changes to the computer before the issue started?

  I suggest you to make sure that the monitor is configured correctly and install the latest audio drivers on the computer. Take a look at the following links in the article and check if that helps:

  No sound in Windows

  Setting up your monitor

  I hope this helps.

• Lightroom 6.5 - tethering still not work, but with the Nikon D7000/D7100 - when will it work?

  Hello

  cant believe it - since 5 upgrades from Lightroom 6 the tethering function did not work.

  In the list of supported devices are listed the two camera?

  A list of cameras that can be attached to Lightroom.

  When the modem function work?

  Greetings

  Thomas

  Hi Thomas,

  Please follow the steps mentioned in the article trouble shooting tethered in Lightroom

  Let us know if that helps.

  Kind regards

  Assani

• "Send link by e-mail" 'NO' is grayed out, it works, but when the link appears on the body of the email it to "not a clickable link"(not highlighted). "»

  I sent the e-mail to me to see if when I received it I can click it but I still not able to click on it. I also check on default values and that they are correct.

  I use Windows Live Mail, IE 8, Windows Vista Home Premium SP2, 32-bit.

  Can someone give me a solution for this problem, please?

  Thank you

  Ustari.

  Hi Syed,

  I just figured out how to make this clickable link, once the link is on the body of the message (in black) all I had to do was press the "enter" key and automatically got highlighted in blue and underlined.

  Thanks again for trying to help me.

  Ustari.

• My impressions of Adobe a line were it tell you that you must buy the program at the top of the page! I can't seem to stop, even after I got my license?, I print on: drag2PDF which has always worked! and yet I work but with this shity line

  Buy now to create a PDF file without trial watermark!

  Curiousl, Acrobat adds a watermark during the use of the test, it must be something else. All that creates the PDF file is to add the line. Contact their support.

• Re: Toshiba Store Alu 3.5 "1 TB HARD drive works only with Windows 2008 64-bit

  Just bought this as a backup device for Small Business Server 2008 running on Windows 2008 64-bit. However it does not? Are there drivers anywhere for this or it is simply not supported and I need to buy an alternative solution?

  Plugged into my laptop Windows 7 64 bit and no problems.

  Someone else had the same problem?

  Hello

  Unfortunately, there is no other software by download.
  I checked the driver page Toshiba in the Options area but didn't find anything

  AFAIK it of a plug & play HARD drive if you n t need any software to recognize the HARD drive

  There may be a password.
  Try this:
  Connect your HARD drive to the computer when the HARD drive is working
  Select the CD drive with your browser (password)
  Run the ONSPCLCK.exe
  Select 'Options '.
  Select "Disable security password"
  Enter your current password
  Unplug the HARD drive
  connect the HARD drive

  Now, it will work, but with no password protection. Perhaps it would work

• Hello :) Illustrator works but cannot open libraries

  I have a problem with libraries in Adobe Illustrator: I am connected in the creative cloud, Illustrator works but cannot open libraries. The menu library in Illustrator keeps telling me that I am out of the creative elbow. I already tried to logout and sign again and it didn't work. What can I try now? Thanks for all the suggestions Anna

  Please, try the following steps.

  1. quit Illustrator

  2. disconnect the creative cloud

  3. exit the creative cloud, CoreSync and CCLibrary (on Windows) Task Manager or monitor activity (Mac)

  4. the return in creative cloud signal

  5. restart Illustrator

  Let us know if that helps.

• NTLM authentication does not work well with Firefox and WebTier (11 GR 2)

  Hello
  We use authentication NTLM with Jason Straubs NTLM - Sentry feature (http://jastraub.blogspot.com/2008/03/ntlm-http-authentication-and.html) Page.
  
  With the old configuration of Apex 3.2 with HTTP-Server Oracle 10 g 2-companion-album, it works fine.
  
  Now install us a Web server with Oracle 11 GR 2 (Oracle Web Tier). I have set up the DADS. CONF in the same way as the old HTTP server. With IE, it works, but with Firefox, I get a HTTP 401 "authorization required". If I press the F5 key to reload the page in Firefox, it works.
  
  Any suggestions?
  
  Kind regards
  Mark

  Hi Mark,

  I'm sorry that I have not seen that you stayed with APEX 3.2. Therefore, it is fair to ESO who changed...

  First new idea:
  Debug information are useful as we see where Firefox gets to. The flow seems to be the same for both browsers. Perhaps the WebTier sends answers differently. I see another article that could be excluded for Firefox:

          -- See http://www.nabble.com/Empty-POST-requests-on-IE-td15332680.html
          -- We have to trick IE that he thinks the authentication fails, otherwise
          -- he doesn't send any data when issueing a POST because he wants to
          -- do the NTLM stuff again
          owa_util.status_line
            ( nstatus => 401,
              creason => 'Unauthorized',
              bclose_header => FALSE
            );
  

  The commentary says that the part is required for IE. The result for owa_util.status_line is perhaps send too early for Firefox or closed, that the 'old' OSH handled diffrently. If indeed this should be left aside for Firefox, you can try to change the code as follows

  IF WWV_Flow.get_browser_version != 'NSCP'
          THEN
          -- See http://www.nabble.com/Empty-POST-requests-on-IE-td15332680.html
          -- We have to trick IE that he thinks the authentication fails, otherwise
          -- he doesn't send any data when issueing a POST because he wants to
          -- do the NTLM stuff again
          owa_util.status_line
            ( nstatus => 401,
              creason => 'Unauthorized',
              bclose_header => FALSE
            );
  END IF;
  

  This leads me to a second point:
  I remember of this manual, you may need to update the owa_util when using the APEX in combination with OHS 11 g.
  What version of owa_util do you currently use?

  select owa_util.get_version from dual;
  

  APEX 3.2.1 comes with owa_util 10.2.0.6 which is the minimum required version. If your database currently has a lower version, you can update it out of your installation package APEX by running owainst.sql located in the owa- directory as sysdba.

  -Udo

  Published by: Udo on 31.08.2010 14:16
  Comparison of fixed

• G780 wireless doesn't work anymore; the networks are but cannot connect

  I have a G780 bought earlier this year. It came with Windows 8, which I still use. Everything was working fine until today. All of a sudden I can't connect to my wireless network (I have a router that can have a 'network of comments' in addition to normal and I can not connect to one of these). I had been fiddling with the settings last night, but everything was working well. I can connect with other devices, so I know that the networks work.

  Networks appear in the list of available networks, but every time I try and connect it just doesn't work. To make sure that I wasn't just typing the wrong passwords I tried to disable all security on one of the networks (so it was a totally open network without password), and the laptop still unable to connect. I tried to reboot the router wireless, by restarting the computer, update the driver for the wireless card, uninstall the drivers and reinstall them, activation and deactivation of the wireless card, by unchecking the option to disable card wireless to save energy and last computer ditch effort that I even did this "Refresh" of Windows 8 option that uninstalls all programs you install and resets the default options. Which included also to uninstall my antivirus program, so I tried to connect without that too. Nothing has made any difference.

  Edited to add that I also downloaded and ran the diagnostic tool on the Lenovo site for my laptop and the version of Windows for wireless network problems and it did not show anything.

  I'd appreciate really no indication as to what to do next. I'm good enough at the end of my mind with this.

  It's the weirdest thing ever. I decided to give it a try once again just for the heck of it and like magic it works all of a sudden. I can now connect to two networks very well. I have nothing after my last try yesterday evening except put the computer into hibernation... I don't know how it works now, but I appreciate the help! I'll create a restore right now, just in case. Thanks for your replies!