Similar Questions

• Given that I have install iOS 9.3.1 my iPhone 6 Plus is very slow, in the speakers and keyboard, I can't watch videos in YouTube or Facebook and sometimes do not work the volume buttons and lock

  Given that I have install iOS 9.3.1 my iPhone 6 Plus is very slow, in the speakers and keyboard, I can't watch videos in YouTube or Facebook and sometimes do not work the volume buttons and the lock. I rebooted my phone like 10 times and it does not work, I need help,

  Have you tried a forced reboot? Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. You won't lose anything.

  If this does not help, I would like to try a restore:

  https://support.Apple.com/en-us/HT201252

• Slow down the Audio and keep beat related Sections

  Hello people,

  I have a song that I would like to remix and I all set beat matching.  When I go to slow down the audio I lose my bearings.  Is there anyway that I can keep the sections that I beat matched and slow down the audio so these sections remain?

  For example, that the song is 120bpm and I have this rhythm corresponded perfectly.  If I have a loop of 4 bars and slow down the audio I have more 4 perfect bars.  I want to be able to slow down the audio and still have my bars 4 faultless.

  I hope that makes sense.

  Logic Pro X: using Varispeed to change speed

• Custom flash drives still work in XP slows down the computer and does not turn off. No drive letter & tried all solutions online.occassionally ok

  When computer for a while and plug in flash drive usb does not recognize the drive, the computer slows down, does not turn off. Even with all the flash drives I have, ok when computer on just. I tried all the solutions online, nothing helps.

  Looks like you might have some performance issues with the computer rather that readers flash... but first of all, I would like to try to take the flash drives to a friends and ensure that they are working very well... If they are I would look at the performance of the computer and health controls. Heres a guide to improving the performance and general peacekeeping home

• Inspect the edge and IIS8 Express

  Hello

  Can someone please tell me if edge inspect works with express IIS8, I can see my computer in the tab and the phone, I can enter password is accepted on computer, but I get the error bad request invalid hostname. I can see public websites if I find another site in chrome, it appears in the tablet or phone.

  I tried

  http://localhost:4182 / which edge of crashes inspect in htc sense and samsung tab

  tried http://192.168.1.67:4182 / get bad request

  tried 192.168.1.67:4182/ again bad request.

  I tried disabling firewall, but nothing works.

  I use Windows 8 pro with IIS8 express

  Thank you

  George

  Hi Mark

  Sorry for the delay to return to you, I not able to get it to work with IIS Express site so published in a directory on the computer and then used IIS8 and now works, its an extra step I take, but at least it works.

  Concerning

  George

• Satellite A665-14N - slow down the download and upload

  Hello, I have a Satellite A665-14N only 1 month. The problem is my upload and download speed, only 0.5 mp/s, upload on 0.08 lower load. Have the last driver for broadcom 802.11n wifi Date 21.01.2010. NSV. 5.60.48.35 but nothing done.
  I use a D - link WIFI WRT150n router

  Y at - there someone who can help me?

  Hey,.

  Have you already checked the download speed and upload using another computer or laptop?

  I'm not sure, but I could imagine the problem is caused by the functionality of your energy saving wireless network card. You can change this in Windows power management. I recommend you to disable the saving of the WLAN card to improve performance.
  Here is a guide that is interesting how to manage power management features:
  http://APS2.toshiba-tro.de/KB0/HTD84026Q0000R01.htm

  By the way: you have good WIFI signal or slow?

• Slow to the installation and the functioning of Windows 7 is too slow

  I upgraded from xp to windows 7. The installation took some time for most of the day! Once the operating system has been loaded it still takes a long time to startup as do anything once the operating system is loaded. Logo for the password startup takes - 5 min 30 sec. Password for desktop computer takes 4 minutes - 45 seconds. Someone has an idea, what is the cause. NOTE: only the operating system is loaded.

  Windows 7 64 bit
  Motherboard is an Asus P5N32-sli
  4gig of RAM, p3 3.0 core d, dep and active virtual
  hard drives are 2 sata WD 80 - running a stripped screw
  nvidia 7800 video cards double
  Disk one withdrew forms

  I tried to change to sata2 raid mode still the same
  vid drivers have been updated - no change
  BIOS is up to date

  UPDATE: I tried also change the sata drives 2 and still - slow installation and operation too

  Asus will likely provide you with the best Sata drivers. You can try to use a single monitor, to see if the impact of the problem.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Slow with the sending and receiving of Skype messaged in group chat

  Seems to have no problem with ordinary a shat, but when I'm in a discussion group that it takes a lot of time for my message be sent it is just gray and have this loading circle to the left.
  
  Also, some messages are received several minutes once they are written to the original, make a group of very confused discussion throughout...

  http://heartbeat.Skype.com/

  TIME ZONE - US EAST. LOCATION - PHILADELPHIA, PA, USA.
  
  I recommend that you always run the latest version of Skype: Windows & Mac
  
  If my advice helped to solve your problem, please mark it as a solution to help others.
  Please note that I usually do not respond to unsolicited private Messages. Thank you.

• Superimposed on an edge and not all that to create the trapping?

  Hello

  I was wondering if anyone can help me, I'm trying to figure out how add an edge set up a picture of the only color I want to import into Illustrator, I can't find online help at all on this subject.

  Told me to superimpose all of the picture first, but our clientele has changed the color of the image so now I have a duty to hit out of colour, he sits on, the only problem is, how do I create a Board that will serve as a trapping inside photoshop?

  I tried to change the edge and its expansion, however, would not flood any color so much worse to overprint.

  I know that in the world, a lot of tears would do this automatically however we may not have that function, we create all trapping manually.

  Any help would be grateful.

  Thank you very much

  Phil.

  Phil,

  It is a fairly simple piece of art. Your best solution is to re-create in Illustrator, where he should have been made in the first place. Then, you can create your traps as you are use to.

  I think you are trying to create art with photoshop that includes some colors that print when placed in Illustrator and others who knocks out. It will be difficult, and it would take your rip to see transparency.

  If I had to use Photoshop to do this (which I'm not), all art, including what is underneath, all would be built in Photoshop. Here, I could control all the colors and the edges and overprints. I use layers and fill colors with selections under contracts or expanded. It is difficult to explain without showing.

  Make it easy on yourself and to redraw this logo as vector art.

• I cannot get my printer to print to the edge of the page and can not find the right settings.

  I am creating a spreads in InDesign A4 A5 booklet, what I've done now, but for some reason when I print it is not printing on the edges of the paper. It is short on the edge and runs along the long edge of about 3 mm 6 mm short. I don't think that the printer we have is full bleed, but I expect to get a little more narrow than at the edges. I looked at the document settings and reset all the options of bleed and Slug and I don't see anything to change in the settings local printers. Please someone any idea that I might be able to change?

  Thank you very much

  The list of features of the printer touts unless expressly impression "edge to edge", it cannot print almost certainly one of the 4 edges. It is a mechanical limitation, and 3-6 mm is fairly typical.

  tobyhawksmoor wrote:

  I expected to get a little more narrow than at the edges.

  Why?

  It is likely, there is nothing else to try. If you feed something that would or should print on the edges, if the printer is capable of that and got the 3 and 6 mm printable area margins, this is certainly the best it will do the printer.

• My toolbar was at the bottom and is not on the right side of the screen when I turned on the PC. How do come back on the bottom?

  How do you reposisition the toolbar background down

  Wednesday, June 13, 2012 19:45:28 + 0000, BJWoodham wrote:

  My tool bar downstairs was on the right side of the screen when I turned on the PC this morning. How do come back on the bottom?

  You say "toolbar." Do you mean the taskbar?

  Although by default, the taskbar is displayed on the bottom of the screen,
  It can be on any of the sides on what you prefer. To move any
  side to side, simply click an unused portion and drag
  where you want it. Don't forget to click inside it, not on the edge.
  by clicking on the edge and dragging will resize not move.

  If it does not move, it can be locked. In this case, right click on it
  and uncheck "Lock the taskbar", then try again.

  Moreover, with the screen monitors wide today, I prefer the taskbar
  on the left or the right of the screen. I think that allows a better
  use of real estate than have it at the bottom of screen.
  Ken Blake, Microsoft MVP

• My toolbar on the desktop is now on the side and very irritating I can move to the borrom as before?

  The toolbar where I can select the programs or shut down the computer is now on the side

  I tried evethyhing I know not to move it to the bottom where it was originally.

  When I go to close Excel for example, it appears and is in the way that so I have to manipulate

  back to close the application.

  Is there a way to bring it back to the borrom?

  On Friday, June 8, 2012 12:03:06 + 0000, Jo Don657 wrote:

  The toolbar where I can select the programs or shut down the computer is now on the side

  I tried evethyhing I know not to move it to the bottom where it was originally.

  When I go to close Excel for example, it appears and is in the way that so I have to manipulate

  back to close the application.

  Is there a way to bring it back to the borrom?

  You say "toolbar", but I guess you mean the tasks bar.

  Although by default, the taskbar is displayed on the bottom of the screen,
  It can be on any of the sides on what you prefer. To move any
  side to side, simply click an unused portion and drag
  where you want it. Don't forget to click inside it, not on the edge.
  by clicking on the edge and dragging will resize not move.

  If it does not move, it can be locked. In this case, right click on it
  and uncheck "Lock the taskbar", then try again.

  Moreover, with the screen monitors wide today, I prefer the taskbar
  on the left or the right of the screen. I think that allows a better
  use of real estate than have it at the bottom of screen.

  Ken Blake, Microsoft MVP

• The taskbar has moved the side and I want it on the bottom of the screen

  even when I right click on the taskbar I can't he come back to the bottom of the screen. I have the taskbar unlocked.

  On Tuesday, 14 September 2010 17:39:21 + 0000, abbycakes wrote:
   
  On Tuesday, 14 September 2010 17:39:21 + 0000, abbycakes wrote:
   
  > even when I right click on the taskbar I can't bring him back to the bottom of the screen. I have the taskbar unlocked.
   
   
  No right click.
   
  Although by default, the taskbar is displayed on the bottom of the screen,
  It can be on any of the sides on what you prefer. To move any
  side to side, simply click an unused portion and drag
  where you want it. Don't forget to click on * in * it, not on the edge.
  by clicking on the edge and dragging will resize not move.
   
  Moreover, with the screen monitors wide today, I prefer the taskbar
  on the left or the right of the screen. I think that allows a better
  use of real estate than have it at the bottom of screen.
   
   

  Ken Blake, Microsoft MVP

• Sending data to the web and try again

  I have a web application running on Tomcat configured to accept data that I send from my 9000 "BOLD".  I have a test application now running on my BB.  I see examples for sending data, but I can't seem to find a way to roll everything into one. I was hoping someone can direct me to a post/example/etc that would meet my needs.

  I want to send my bb to my web application data, sometimes the text, sometimes media / other.  I want it will retry connections if it is not complete fully and hold until it does (or timeout after that # attempts then abandon).  If the sending of a photo on the EDGE and connection falls Mid-upload, I want he's trying to take over.  If theres no data connection, save and try again later.  I'm sure that it's simple, but I couldn't find anything in my research.

  Thanks for any help,

  Song

  Browse documents of the API, including at the level of the connector, class HttpConnection, CoverageInfo and coverage. Once you are familiar with those, you can get what you want easily.

• Worm 16.09.20 document is automatically closed after the scroll and zoom text output but the application is running

  IPad 2 (IOS 9.3.5), Adobe, 16.09.20, Document version is slowed after the scroll and zoom text output and then automatically closed, it jumps to the main menu, but application is running (in multitasking mode). This behavior was not in the previous version. I tried to reinstall the IOS on IPad, but no change.

  Thanks for any help

  Hi jakubh25891777,

  Acrobat Reader 16.09.21 is now available in the App Store.

  It should solve the frequent accidents that you have experienced.

  Please try it and let us know if it works for you.

  We apologize for the inconvenience.