Background color TestStand UI SequenceView controls

Similar Questions

• Problem with the background color of a disabled control

  I have a few controls on the top a box colored and elevated. When I disable and gray (round button) control an adverse change occurs in the background color of the control-it gets surrounded by a grey version of the color of the raised area. I would like that the bottom remains the same as it does on the default gray Panel.

  I looked through all of the properties, but can't seem to change this behavior.

  Thanks for the link, looks that it may have been fixed now for controls tab (?) but no decorations. The solution is to use a tab control to single page with no tab, rather than a raised area. The difference in behavior can be seen in the joint, if we look carefully it is always a small amount of color change surrounding control disabled on the tab.

• is it possible to change the background color of the checkbox control?

  Hello

  Is this possible in LV to change the background color of the checkbox system? When I try to do this via the Colors property [4] I get error 1131:

  LabVIEW: You cannot use this property with this control system.
  Property name: color [4]

  No, it's what are the control systems for. They adapt to the configuration of the machine.

  Use one of the other palettes if you want to change the color.

  Ben

• How to prgrammatically to change the background color of a 'number' inside a cluster control

  Hello

  using a property node, it is possible to change the background color of a control number.

  But how to do this, if this number control is inside a cluster? I would not have found the property to the background color (see attached vi).

  Thank you very much and best regads.

  Michael

  P.S.: I use a reference, because the color change must run inside a Subvi.

  Hi Michael,

  Insert a function "to the more specific" and connect the digital constant refnum. I modified a bit your vi.

  See attachment.

  Mike

• How to set the background color of header in a datagrid control spark

  I searched high and low for an answer to what should be a simple question.  I want to change the background color of just the area of my datagrid column header.  I think it must be done in a custom skin that I created but I can't figure out what to do next. I created the custom button, panel skins and changed without problem background colors.

  Any help would be gretly apreicated.

  I posted a complete solution and a demo with the code on ramblingdeveloper.comexample.

  The direct link to the article is HERE.

  The link to the demo and the source is HERE.

  I hope this helps you with your problem.

  -Mike

• Can not change the background color of the rose.

  Recently, I installed Thunderbird and tried some of the controls when I did. Now, it seems that my default background color is pink. (#ffcccc) I can change it to one of the 70 standard colors for mails that I write during a session. When I close the screen of Scripture and reopen it, it comes back with the wire pink. It shows no pink on my screen but when I send it to someone else it's pink. How can I change this back to white so that it will stay like this? As I understand it, it's the normal way works only until I close the screen of Scripture.

  You have under Tools(or AppMenu/Options), Options, Composition, general in the HTML section?

• is it possible to set the background color of a table or chart to be transparent?

  is it possible to set the background color of a table or chart to be transparent?

  Thank you

  Yes.

  Select tools palette (view > tool palette) and set the background of the graph as well as the control in transperent.

• Unusual tab background color

  Hi all

  I always thought that a tab control on a Panel set to use Windows Visual Style for controls can have two background color of tab pages:

  • Some shade of light gray / white when tabs appear on the top of the control
  
  
  • The Panel background color if the tabs are on the other sides of the contrl

  I found, however, a tab control that behaves differently, always showing the white background regardless of the position of the tabs: table below compares the control tab on the left, behaving 'normally', with the one on the right which is white. Consider color background of the pages tab cannot be defined in the IUR editor since the control follows the theme of Windows (this remains true for both controls).

  

  Now, I don't know how I got this 

  Does anyone have an idea on how to do it?

  I enclose the above sample Panel to allow you to test.

  I found it initially on CVI 2009SP1 on Win7 with CVI2012SP1 TIME machine, but the control displays the same beaviour on CVI2012SP1 too.

  Roberto,

  Maybe I misunderstood, as I CVI2013 and therefore cannot make a direct comparison, but I was able to get the same color... Have you tried to deselect 'Use Windows Visual Style for controls', change the color and then re - activate the checkbox? That worked for me...

• keyFocus research set the Boolean background color

  I searched "ctl class [] colors property" before posting.

  I changed the background colors Boolean by their properties [] of different colors, but I was wondering if there is a way to scan the controls [] refnums and set background colors based on the main orientation for the true/false.

  See the code snippet. I don't see a property of background colors in the ctl class. Is there another under "ctl" class that allows you to set Boolean [] property colors?

  Thank you

  There is no property to the control level.  You will need to cast to a more specific 'Boolean' to get the property.  However, you will have to do in a case because it will error if the control is everything except Boolean.

  

• How to change the background color of string programmatically?

  How to change the background color of string programmatically?

  Are you talking about string indicator and control chain? If so, right-click on a control/indicator of string and select Create-> property Node-> text-> text-> BG Color colors. Change to write and a number of the color you want to use phone.

• Change of FG and background color of the individual elements in the array

  Is it possible to change the color of foreground and background of the individual elements of the array?

  According to the the link below it is not.  But that was 4 years ago and I wonder if it's possible with the new version of Labview.

  http://forums.NI.com/NI/board/message?board.ID=170&message.ID=125484&query.ID=927250#M125484

  I could not find a way to do it using Labview 8.2.1.

  Thank you

  Adam

  No, you can't.  The tables have to share almost everything except the real value of the data.  As mentioned, you can use a second indicator to indicate your values of interest.  If you just want to change the background color, you can make a table of squares of color which lies behind the numbers array.  Make the background of the numbers (and the transparent table container.  You can do it 'look' as the BG of the numbers is changing.  The FG Color is not as easy.

  A (maybe better) alternative is to use a table or a listbox control to display your table.  They allow you to change the colors of the cells.  You will need to convert your table to an array of strings.  If your table is small, the hit on the treatment will be not significant.  But if you have REALLY large picture, you'll notice put worn times on day of the table/list box.

• CNC - text and background color changes when you use the inc/dec

  Hello

  I develop an application that has a sign with a black background and green or red numbers. I have added digital controls and set the text color and text background color attributes accordinglingy. I put the control digital hot or validate command mode and display the arrows of inc/dec, because I want to incr/Decr numbers.

  The problem is that when I run the app and I hit arrows inc/dec, then the colors inside the scope of digital control become reversed: black background becomes white and cyan green number. I created an assosicated callback with digital control and tried to force the text color and the background, in the EVENT_VAL_CHANGED section, by using the SetCtrlAttrribute() function, but nothing helped. Also added ProcessDrawEvents did not help.

  When I mouse click again outside the digital command, then it returns to its original colours (green, black text background).

  Suggestions as to how can I fix?

  I want it keeps its original colors at all times, even when I am clicking on the arrows incr/Decr...

  Kind regards

  pgriep

  Hello Roberto,

  I thought it would be another way to fix it. Just hoped that I could fix it in setting or by disabling an attribute.

  Thanks for the effort!

  See you soon,.

  pgriep

• Cannot delete the background color of the icons on the desktop in XP.

  I'm not able to remove the background color of the icons on the desktop in XP.

  I tried the following steps with no luck.

  1 Control Panel / System / Advanced / Performance tab / button settings and tick: shadows fall to use the desktop icon labels

  2. display properties-> Desktop-> Desktop Customize-> Web-> "Lock desktop items" and "my current Home Page" is not checked.

  Any suggestion would be appreciated...

  Thanks in advance.

  Naveen

  These links should help you:

  http://www.TomsHardware.com/Forum/25340-45-unable-remove-shadow-desktop-icons-Windows

  http://www.geekyard.com/OS/Windows/how-to-remove-desktop-icon-background-color/

• Background color of digital text on a digital element to a cluster.

  How to change the background color of digital text (NumText.BGColor property) on a digital element to a cluster?

  I see the property when a digital is autonomous, but do not see it when it is within a cluster.

  Just right click on the control inside the cluster and the property node create and select your property.

• Change the background color of line indicator

  I'm doing an indicator of string with a black background or make it to which the channel indicator is transparent

  Thank you

  You can change the background color of the control a chain using the paint tool. Choose View > Tool Palette.

  Select the icon below a brush.

  Right-click on the background area of your control of the chain.

  A color mixer will appear - select a color block or the T in the upper right corner to transparent.