Backup in Windows 7 error 0x8007045d

Similar Questions

• "Receive the error message" Windows 7 error 0x8007045D: the request could not be performed because of an i/o device error. "

  Original title: Windows I/O device error?

  Hi all

  I'm Chinmaya and I use Windows 7 Ultimate.

  I have this error message.
  "Windows 7 error 0x8007045D: the request could not be performed because of an i/o device error."

  whenever I try to copy songs to my PSP device. In fact, it started when I was copying a 16 GB file from a USB on my computer. One night before everything was fine. But now he's screwed. I tried several times, restore, backup start in safe mode and almost everything that has been mentioned in other responses from Microsoft. Another important thing, I was you know is

  Whenever I connect my camera to the computer, my computer is not responding. All possible suggestions... Please help :)

  Hello Chinmaya Sharma,

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description provided, looks like you have a problem with the Windows 7 error 0x8007045D error message: the request could not be performed because of an i/o device error

  Perform the disk check and check.

  Check a drive for errors (Windows 7)

  Warning of Chkdsk.

  Important: When running chkdsk on the drive if bad sectors are found on the hard drive, then chkdsk attempts to repair this sector. If no data is available while data may be lost.

  Answer to us if you are having problems with error e/s or any other issue of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• Windows 7 error 0x8007045d code

  I have a new Dell I7-860 with 4 gig memmory running windows 7 pro. I bought a new WD 500gig external for backups. I tried to run a backup on my system as my external drive is connected to my network. I already have the drive mapped and shared drive. I have no problem see the drive via my computer.

  This error 0x8007045d kills me because I need a clean backup of my new machine.

  Thanks for help

  Hello Windows7newuser,

  I suggest that you run the disk check to check if this is due to bad sectors on your computer:

  a. Click Start, type cmd in the start search box, right-click cmd.exe in the list programs and then click Run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  b. at a command prompt, type the following command and press ENTER:

  CHKDSK X: /R

  In this command, x is a placeholder that represents the drive letter of the volume you want to check.

  You can see the bottom of the article for more information on this:

  http://support.Microsoft.com/kb/952272

  This article is for Windows Vista. However, it also applies to Windows Vista.

  Note: Running chkdsk can cause loss of data on your computer. I suggest that you back up and save all the files before running chkdsk.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Backup of Windows 7 - error 0 x 80080005

  I am running Windows 7 and trying to back up my system.  Whenever I go to control panel > system and Securiy > Backup and Restore > backup configuration, I get the message:
  «The backup application could not start due to an internal error: the execution of the (0 x 80080005) server failed.»

  I have administrative rights on the machine.  I did a search online and tried a few things, but nothing has worked.  Any ideas?

  Either incidentally, all notes on this in Windows that I could find are Windows Vista and dated 2009.  Very confusing...  Something concrete for Windows 7?

  honestly for this question, I would ask this question in the technet forums only because I see more reported stuff out there.  I've included a few other links on this topic.  I hope this helps, but honestly the windows backup utility is not the greatest.

  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/0f8bb75c-f5a6-4A3B-b2a7-cf20c4986244

  http://social.technet.Microsoft.com/forums/en-us/w7itprosecurity/thread/f6c42c2f-b04a-4f43-a4da-fbc5d20226a8

  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/thread/6bf794ff-6260-41de-938B-760fbefeb4c4

• Backup of Windows 7 - error code 0 x 81000031

  Failure of Windows backup and get follow message:

  Windows backup does not have everything in determining the location of the libraries of one of the users included in the backup. Details: An element of Volume Shadow Copy Service has encountered an unexpected error. Check the log of events applications for more information. Error code is 0 x 81000031.

  What should do?

  Long Hello,

  Thanks for posting your query in Microsoft Community.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  I suggest you try the steps from the following link:

  Error code 0 x 81000031 occurs when you try to back up files by using the backup and restore on a Windows 7 computer Assistant
  http://support.Microsoft.com/kb/975692

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Windows 7 error code backup 2155348000. Backup is wrong every time.

  Original title: error ' 2155348000 backup

  Windows 7 error code backup 2155348000.  Backup is wrong every time.

  Hello

  1. do you get an error beginning with 0 xcode?

  2. were there any changes (hardware or software) to the computer before the show?

  3. what application you are using to perform the backup?

  Method 1: make sure that the Windows backup service is started.

  a: type Services.msc in the start search box and click on enter.

  b: Now, find a service called Backup Windows and make sure that it is started and is defined as automatic.

  c: click on apply , then click on ok.

  Method 2: click on the link mentioned below as a reference, if you get the same error code as described in the article.

  http://support.Microsoft.com/kb/979281

  Hope this information helps.

• On Windows Vista 32 bit full backup fails with error 0x8007045d i/o device.

  Original title: 32 bit back up fails i/o device error

  I'm doing a full backup, because I just perchased Office 2010. I am trying to download on my cd player, E: got as far the 3rd cd and it fails

  i/o device error (0x8007045d)

  Help with this error code?

  Hello
   
   
  Try the methods listed in the section below and check if that helps resolve the issue.
   
  Error message when you try to perform a full backup on a Windows Vista-based computer: "the application cannot be performed because of an i/o device error."
  http://support.Microsoft.com/kb/952272
   
  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to fix error 8007045 D message when you perform a backup of windows?

  I got in trouble, make a backup of Windows of the Sony VAIO laptop from a parent on a 1 TB drive "My Passport".

  Backup failed to complete (the system image + backup windows).

  When I did a regular backup of Windows, all files selected by Windows, it worked.

  When I then try to make the system 'image' backup, I get the following:

  ===========================================================
  The operation failed because of a device error encountered with the source or the destination.  If the volume of the source or the destination is on a disk, run CHKDSK /R on the source volume or destination and then retry the operation.  (0x8078012D)

  Additional information:
  The request could not be performed because of an i/o device error. (0x8007045D)
  ===========================================================

  I ran CHKDSK /R on Passport drive, and it passed.
  The USB is formatted to NTFS, if that's relevant.

  When I accessed the system utility checks the C drive, he had me to restart the computer and the drive for errors on a reboot of audit, but which did not find any problem.   I guess I need to start from a CD instead of starting from the hard disk, in order to be able to run the "CHKDSK/r" on the C: drive as well as two other partitions.

  Am I missing something?  Should I use the "boot CD" we created, boot in the BACK and then do the CHKDSK /R on the C drive?

  (I'm really uncomfortable about messing around with C drive until I have a backup, but because of a possible problem on the C drive, I can't do the backup... or is there something else I need to do next?)

  Thanks for all the suggestions; I'm going to go through one by one, so I can learn about them.

  This afternoon I contacted support for Microsoft Windows and had a "chat" with one of the support technicians.  He told me to START to > ACCESSORIES > COMMAND PROMPT that I clicked on and does: "run as administrator.

  I then entered: chkdsk /f /r so that I was in a directory on the C drive.

  (I'm guessing / r means read all the information and the /f to fix any problems that are found).

  The computer has restarted and began a long inspection of the C drive, taking about two or three hours or more.   Meanwhile, he finds two clusters defective and added to the table 'bad cluster.  I took a picture of the screen, so I don't know what file he has identified as having problems.

  The process is complete, the computer restarts, and I was able to make the "system image" backup without any problem.

  Thanks for your help.  Between you and other colleagues at Microsoft, not only, I know what it takes the next time, I have a better understanding of what is happening.  (How to mark this discussion as "resolved"?)

  clusters

• error 0 x 81000031 when you try to perform a backup of Windows 7

  I'm not able to back up my computer. Problem with Windows 7 backup. Give the error code 0 x 81000031. Cannot use BitLocker Drive Encriptación because critical
  BitLocker system files are missing or damaged. have a simple answer. Please guide.

  KSD

  Hello KaranDadwhal,

  You use Windows XP or Windows 7?  Also, what version are you using?   Are you using the backup and Restore Wizard?    Please let us know status

  For Windows 7, take a look at this article: scenario 2: BitLocker Drive encryption is enabled

  http://support.Microsoft.com/kb/975692

  Thank you

• Error 0x8007045D when you try to install Windows Vista SP2

  Hello

  Currently I have Windows Vista SP1 and want to upgrade to service pack 2. When I try to do the update of Windows, I get "error (0x8007045d) Error_IO_DEVICE. I also tried to install it in safe mode, I get the same error message. After having traveled a bit on the internet, I found that it is probably because my HDD is damaged... so I run the chkdsk program...

  The chkdsk program stops at 16%... Step 4 of 5... When 85785 files off 300000something files are done... and it does nothing more. It keep running like this all night, it goes no further.

  Does anyone have any suggestions on what I need to do to successfully install Windows Vista SP2?

  Thanks for your help!

  OK, I started the computer with the Windows CD and I ran chkdsk /f at a command prompt.

  Chkdsk /f found errors it corrects.

  I ran Chkdsk/r... .he got stuck after scanning 85763 files... near the place, he would always get stuck (85785 files)... so I guess it's the same file that crashes chkdsk.

  The good news: I still have a functioning computer.

  The bad news is that I ran the SP2 from windows update in new safe mode and it didn't work... I'm still stuck with my problem.

  I have an extra hard drive... that I ordered from Dell for my girlfriend's computer, his computer died before she could use the player, but it is larger, then the drive of your computer and it is brand new... the only downside is that the player has been implemented for the computer of my girlfriend (pilots and other things) and does not work in my computer. I guess I'll try to format that drive to make it work in my computer... it should fix this and then bad SP2 remedial power very well.

  I guess I have no choice.

  I suggest to remove avg (uninstall) then try sfc/scannow then chkdsk /f several times. a few times, they need more going to make things more

  Microsoft security essentials is a better a v for not update couseing problems.

  You can allways put avg in the back.

  not having is not enouph to free space for temporary files can couse problems too.

• Getting the 80070005 error during the backup with windows vista home premium then closes backup

  When I use backup in windows I get errors then backup closes. the errors were 0x800700AA and now 0x80070005. I'm not familiar with what they mean but have tried Fixit without success.

  Hi Brian,.

  This error code means that the file or folder you want to backup does not have the necessary permissions.

  Method 1:

  If you need to make a backup of any file or folder, please ensure that give you all the permissions for that particular file or folder.

  To set the permissions of files, see the procedure below:

  a. right click on the file or folder and then click Properties.

  b. click the Security tab.

  c. under group or user names, click your name to see the permissions you have.

  d. If they don't get permission, click on change and give the full control.

  e. then check if you are able to backup.

  What are the permissions?

  Method 2: Check if you are able to backup by following these steps:

  Try to temporarily disable your anti-virus and malware during execution of the backup. If the backup works fine, then you have to search for updates and firewall settings in the security software.

  Note: Make sure that you enable the antivirus software, other security and firewall after the test programs.

  Method 3:

  Disable UAC during backup control.

  Enable or disable the User Account Control

  Note: Make sure that you enable user account control and the back of the antivirus on the computer after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.

• When I install windows 7 at the end of the expansion of windows files editing get an error "0x8007045D.

  Hi when I install windows 7 at the end of the expansion of windows files editing get an error "0x8007045D.

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you have found the error code.

  I suggest you refer to the suggestions by Andre Da Costa MVP responded on 27 April 2012 and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/cannot-install-Win7-error-0x8007045d/8cce76b4-25c6-4d07-ACB4-0dfa1ac3f4d3?DB=5

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Backup Windows 7 error code 0 x 81000037 ' snapshots of files cannot be read. "

  Hello world
  Today, I tried to make my first backup of the computer.
  I tried 4 times now, but still got the same error, something about shots of files that cannot be read.
  Error code = 0 x 81000037
  I really tried many things to solve this problem, because I do not know how to start.
  Any help from someone who knows what to do is certenly welcome.

  Thank you in advance, Michael

  original title: backup Windows 7 error code 0 x 81000037

  Hello

  I have the same problem two days ago. However, I had installed Microsoft Security Essentials (MSE) at the beginning when I bought my computer Dell (dec 2010) (I have not used McAfee). Two days ago, I ran backup on my disk network as usual and got the error message, but I noticed that the MSE has detected a threat to java. I decided to uninstall all downloads in two days ago, and the most important was to run a COMPLETE SCAN of MSE. He caught 3 java threats and withdrawn. After that, I ran backup again and it worked perfectly. I hope that this experience will help someone when I post my response.

  My computer is a desktop i-5, Dell, Windows 7 Ultimate, my network drive is connected to Linksys E3000 of Seagate.

  Note 1: I regularly MSE update later.

  Note 2: I went through the so-called "reparse points" and without success.

  Note 3: Download those that I uninstalled everything came from Apple (please don't hurt me I don't like Apple.) I just wanted to test in all circumstances.)

  Exactly the same problem and same solution: run Full scan in MSE (which found a few 'malware' which is associated javea), then uninstall java worked well!

• IO error 0x8007045D with Western Digital External Hard Drive in Windows 7

  I have a Western Digital 1 TB external hard drive, and I am currently running Windows 7.  When I try to move files on the hard drive I get the error 0x8007045D i/o and it won't let me move or copy the file.  What can I do to fix this?

  Error 0x8007045d is "ERROR_IO_DEVICE" - "the request could not be performed because of an i/o device error."

  Check the behavior in a clean boot, or insafe mode.  If it persists, you will have a problem with the external hard drive.

• Get 0x800703EE and 0 x 80070022 error code while trying to perform the backup in Windows 7.

  * Original title: backup error code windows 7; 0x800703EE when I looked for details: a file was opened from outside. Option: Repeat the backup, or change the settings, I repeated backups and got the error code: 0 x 80070022

  A few weeks ago another backup problem followed a clean boot Advisor do not understand warnings lost a lot of files, but managed to finish the backup and for a few weeks or if weekly backups on my acer aspire was dandy until this week. On the way to this site saw an ad "fix windows errors by downloading this program. I wonder if these ads are genuine and not a virus or malware. you will advise me on how to go about these sorts of things. Thanking you in advance.

  Hi Jamshid,

  I understand the inconvenience that this may cause.

  This problem could occur due to the corruption of system file by the program that you downloaded.

  The fixit or any program you download on the internet could be a source of pollution. It is not recommended to install the advertising programs.

  To resolve this problem, I would like you go to control panel and remove the program downloaded.

  Here is the link to remove the program.

  http://Windows.Microsoft.com/en-us/Windows/uninstall-change-program#uninstall-change-program=Windows-7

  You can also use the System File Checker scan to remove the corrupt files.

  SFC (System File Checker) is a tool that scans system files and replaces incorrect versions of system files by using the correct versions.

  See the following article for more information on using SFC tool to troubleshoot missing or corrupted system files:

  http://support.Microsoft.com/kb/929833

  To ensure that your computer is virus-free and spyware, run a scan online using the link below.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Keep us informed on the status of the issue. We will be happy to help you.