backup of the database server takes a lot of space in repository

Similar Questions

• When updates are performed on the computer, they take a lot of space. Why the ancients are not deleted?

  All updates.

  The update uninstall method in Windows Vista is quite different from that in Windows XP.

  Uninstaller for each update folder no longer exists in Vista and the uninstall information is stored by the Volume Shadow Copy service.

  After each update, Volume Shadow Copy service backup only the updated files.

  So with Vista, it's a differential backup, rather than a full backup files for uninstall
  in Windows XP.

  This safeguard mechanism is used to save disk space.

  TaurArian [MVP] 2005-2010 - Update Services

• stop the database server, is any condition for application server

  Hello
  
  I want to catch a cold backup to the database server.
  
  If I shutdown server, is any affect in Oracle application server?
  
  
  Concerning
  
  S.Azar

  azarmohds wrote:
  Hello

  I want to catch a cold backup to the database server.

  If I shutdown server, is any affect in Oracle application server?

  Concerning

  S.Azar

  Hi Azar

  No, there is no any effect to the Oracle application server

• How to make a backup of the database with RMAN Oracle Single Instance

  People,

  Hello. I use the server of Oracle 11 GR 1 material with operating system Oracle Linux 5.10 database.

  I understand how to back up the database instance in SQL Server with Windows. But do not really understand how to back up the database instance in Oracle on Linux.
  I did it cold and hot backup for the database HRCS90 instance, but both receive the same error message.

  
  Cold backup is below:

  SQL > startup
  ORACLE instance started.

  Total System Global Area 538677248 bytes
  Bytes of size 2146024 fixed
  528482584 variable size bytes
  4194304 buffers of data bytes
  Redo buffers 3854336 bytes
  Mounted database.
  Open database.

  
  SQL > shutdown immediate
  The database is closed.
  The database is dismounted.
  ORACLE instance stops.

  
  RMAN > backup database;

  From backup 25 November 13
  using the control file of the target instead of recovery catalog database
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the backup command to the 25/11/2013 14:26:52
  RMAN-06171: not connected to the target database

  
  RMAN > backup HRCS90

  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-00558: error occurred during parsing of order entry
  RMAN-01009: syntax error: found 'distinctive sign': expected an of: ' archivelog, auxiliary, as, backup backupset, blocks, channel, check, copy, copies, controlfilecopy, cumulative, current, basic data, datafile, datafilecopy, device, diskratio, db_recovery_file_dest, db_file_name_convert, duration, filesperset, for, format, from, full, strength, file, incremental, keep, (, maxsetsize nochecksum, noexclude, nokeep, not, proxy, pool, re-use, recovery, section, skip). ', spfile, skip readonly, setsize, tablespace, tag to validate.
  RMAN-01008: the identifier of the AfDB was: HRCS90
  RMAN-01007: line 1 column 8 file: entry standard

  
  RMAN > backup database HRCS90

  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-00558: error occurred during parsing of order entry
  RMAN-01009: syntax error: found 'distinctive sign': expected an of: ' archivelog, auxiliary, backupset channel, copy, controlfilecopy, backup, common, base data, data file, datafilecopy, remove, diskratio, db_recovery_file_dest, filesperset, format, force, file, include, keep, (, maxsetsize, noexclude, nokeep, not, pool, more reuse, recovery, section, skip, spfile, pass readonly, setsize, tablespace, tag, to).
  RMAN-01008: the identifier of the AfDB was: HRCS90
  RMAN-01007: line 1 column 17 file: entry standard

  While the instance of database HRCS90 is starting, I do hot backup by using the same commands and get the same error message with above cold backup.

  My question is:

  Can any folk tell me specific steps (order by order) to back up a single instance of the database in Oracle with RMAN?

  
  Thank you.

  Yes, you can restore and recover the backup, but not at the moment. You will only be able to restore and recover at the time of your backup.

  For example.

  If you take backup (mount point with no mode of journal archive) at 06:00 and your grave database crashes at 21:00, you will be able to restore and recover until 06:00. You will find all the changes made to the database between 06:00 and 21:00.

  If you want your database to recover until 9 PM or until a point in time, then you must put your database in log mode archive, and then save the archives.

• How to get information from the database server log?

  Oracle 9.2 UNIX
  We got an error block in the database of production last midnight for 40 minutes and nothing has been treated during this time which delayed our process by lots of night production. Then he disappeared after 40 min. I would like to know what was going on during this time in the database. My question is where can I find an error in the database server? In bdump? Appreciate any ideas.
  
  Thank you
  S.

  If you have jobs regularly collect statspack report, then it will be easier to troubleshoot. You can just pull the report of the time period.

  A couple of things you can check if there is a problem of storage during the time, as a backup or other work running took all storage OS, so Oracle hung because no space for archiving of newspapers. Usually it will record errors in the alert.log, but if bdump as complete destination, the error will not be recorded.
  Check the activity of the BONE during the time, which is CPU and IO activity. See if you have installed and configured sar
  Check the message of OS file.

• Download file from the database server, through application server.

  Nice day

  I use Jdeveloper 11.1.2.3.0.

  I have a requirement to download a file that already exists on the database server Directory. Now my current scenario is that user is connected to the application server, and the user has no direct access to the database server.  I drew a diagram of my requirement as:

  
  

  

  
  

  I get a way to do this. Please suggest.

  
  

  Best regards,

  Julien

  The session does not expire if you are streaming data from the application to the client. However, you will need to manage the data sent over the network, because it can make the very slow network if you send this amount of data at high speeds on the network and then to the customer. This connection between client and server is the biggest problem, because bandwidth is usually small. Think about downloading software by one side oracle (for example 1 GB), this takes time and is prone to errors.

  We did something similar by transferring the data from the database (in our case, it has been stored in a BLOB) on a dedicated server with a server web apache on it. Then, we send a link to the client, which then uses the link to get the special file server data.

  The advantage is that you don't have to code the transfer of huge files in the application of the adf but can already use ready to use of software (balancing bandwidth and the recovery of a broken download).

  Timo

• Is it possible to move the \windows\installer folder? The reason why I ask is because it takes a lot of space and I want to move it to another disk with more space.

  The \windows\installer folder takes a lot of space and I want to move it to another drive if possible. Ashwin

  No, I don't think. Just about anything in the Windows directory cannot be moved. You will need to find another way to clear disk space. Try to compress your drive hard (if you don't know how, ask).

• DMZ web server-> inside the database server

  Suppose that a network topology looks like this:

  A PIX with 3 interfaces:

  interface (private public static IP 10.10.10.1)

  interface (public static IP of 69.110.38.35)

  interface (static IP private address of the 30.30.30.1)

  --------------------------------------------

  The internal network has a {server} with the IP address of 10.10.10.2.

  The DMZ has a {web server} with the IP address of 30.30.30.2.

  I will welcome external guests (outside) access to the web server (30.30.30.2) via port 80.

  This web server access turn the database server (10.10.10.2).

  Assume that all other commands are issued. Then, I'll create an access list that allows server WWW DMZ to communicate with inside the database server.

  access-list dmz-to-inside permit tcp host 30.30.30.2 host 10.10.10.2 eq 1521

  Should I publish the following, too:

  (1) access-list dmz permit tcp host 30.30.30.2 no matter what 80 eq

  (2) access-group in interface dmz dmz

  (3) static (inside the dmz) 10.10.10.0 10.10.10.0 netmask 255.255.255.0

  xlate clear 4)

  If so, what each of them do?

  Thank you for helping.

  Scott

  1. Yes, the static statement "10.10.10.0 static (inside, dmz) 10.10.10.0 netmask 255.255.255.0" will disable NAT. Although it is not necessary to disable nat, however, it saves money and simple to manage. the reason for this is the traffic between the dmz and inside is private, there is therefore not necessary to apply the public ip address.

  2 pix receives the package intended to 30.30.30.2 10.10.10.2. PIX examines the static statement and based on the static above statement, pix will not nat package (i.e. pix will leave the soruce address be) and send it to 30.30.30.2 via the interface of the demilitarized zone.

  for example

  original package - source 10.10.10.2, destination 30.30.30.2

  After pix - source 10.10.10.2, destination 30.30.30.2

  3. the "Clear xlate" command must be issued whenever the nat/global or static has been added/deleted/modified. This command is to force the pix to clear the existing ip translation.

  for example, before you add the command "static 1.1.1.1 (indoor, outdoor) 192.168.1.100 netmask 255.255.255.255", the pix may already have an ip 192.168.1.100 translation (it might come from the nat/global). now, after you apply the static command, the pix will keep the existing translation for a certain period time. 'clear xlate' is needed to erase the old translation and so to activate the new static statement.

• recommended location for the installation of Enterprise Manager 13 c, my client pc or the database server?

  Hi all

  I want to install Oracle enterprise manager 13 c on oracle 12 c Enterprise edition.

  What is the recommended way to install EM? install on my client or install on the database server itself?

  Please guide me.

  Thank you.

  Really, neither.   If you talk about the broad company EM Cloud Control (12 or 13), it requires adequate resources and must be installed on a server, no cell phones.  Unless you are looking just to play - you can then consult the virtual images available Oracle VM Templates.   It has also not recommended to run it on the same servers that you are monitoring.

  How many targets you track / manage with the system?  If it is a unique environment, the Express EM version may be bettter, where you boot agent on the database server and manage most of the functions of the server.   If you have more than one or two databases, Cloud Control is the best, but it requires little equipment. Sizing of information can be found in the docs - https://docs.oracle.com/cd/E63000_01/EMBSC/preinstall_req_hw.htm#EMBSC121

• How to create a local directory on the client and not on the database server?

  Hello

  First of all, thank you for taking the time to solve the problem.

  I apologize if there are errors in the format used for the display of this issue.

  I have a procedure that generates data in the csv file and is loaded into a directory.

  I have a requirement to plan this procedure should be performed every week.

  I did the above two steps successfully.

  but the problem am facing is that files are downloaded in the directory location for the oracle server. but I need the files to load to my own record of operating systems.

  IE my PC is not the database server, but I thought to create a directory on the operating system of my own PC C:\ drive.

  It is a frequently executed procedure then uses dbms_scheduler.

  Can we create a directory on our own PC operating system file. I use Windows 7 OS?

  Please find details of version below.

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  PL/SQL Release 11.2.0.3.0 - Production

  CORE Production 11.2.0.3.0

  AMT for Linux: Version 11.2.0.3.0 - Production

  NLSRTL Version 11.2.0.3.0 - Production

  Your time and your help is very appreciated.

  Thank you

  SQL and PL/SQL FAQ

• Follow incoming JDBC connections to the database server

  Hello
  
  We have a database of 10gr 2 on RHEL4. This database is mainly used by Oracle E-Business suite.
  External applications connect to the database using JDBC. Most of the time this configuration works very well. Sometimes, however, we get an error "no data to read from socket" at the end of the external applications. It seems to be a problem with the JDBC connections, but we could not even identify him. But I feel that the problem is NOT the end of the database. I just want to confirm that.
  
  To cut a long story short - is it possible to follow incoming JDBC connections on the database server? Of course, I can follow the actual sessions created for external applications. But is it possible that I can say that if the JDBC request reached the server database or not?
  
  
  Kind regards
  Ousseni

  Ousseni wrote:
  Thanks for the reply.

  Oracle RDBMS cannot differentiate between connection OPTION of any other flavor of the customer.

  Knew that :)

  listener registers EACH connection request, you get

  As the JDBC connection string is correct at the client end, I'll be able to find details of all applications for connection in the newspaper of the listener, even if some of them do not end up like connections to the database.

  PS: I do not belong to the sanctified tribu tribe of DBAs, so please excuse the obvious ignorance!

  Kind regards
  Ousseni

  Each connection request that gets the listener is registered; regardless of the success or failure.
  listener registers status = 0 for successful queries.
  listener registered status = (as 12514) for failed requests
  If/when the connection request goes wrong & can't seem to the listener, then the listener does nothing;
  Since he never received such a request

• Logon sqlplus from the database server do not.

  I want to export data from the a database. I can sqlplus as a particular user (owner of the table) from a remote server. But when I try to sqlplus or run the exp from the database server (the server where the database is running), I refused to sign. Is there a configuration in the database in order to prevent this loggin user from the database server
  
  /U01/Oracle/app/product/10.2.0/DB/bin-> sqlplus testuser / *.
  
  SQL * more: release 10.2.0.3.0 - Production on Thu Apr 29 14:28:30 2010
  
  Copyright (c) 1982, 2006, Oracle. All rights reserved.
  
  ERROR:
  ORA-01017: name of user and password invalid. connection refused
  
  
  /U01/Oracle/app/product/10.2.0/DB/bin->. / testuser exp / * file=/tmp/interface.dmp tables = interface
  
  Export: Release 10.2.0.3.0 - Production on Thu Apr 29 14:28:53 2010
  
  Copyright (c) 1982, 2005, Oracle. All rights reserved.
  
  
  EXP-00056: ORACLE error 1017
  ORA-01017: name of user and password invalid. connection refused
  
  
  TIA
  Ravi

  Try this.
  1. the cd in your home directory.
  2. starting at the prompt, so source oraenv
  -> . oraenv
  3. When prompted enter the name of your database, in the same case, as in/etc/oratab.
  4. try to connect now
  -> sqlplus testuser / *.

  If it works for you, then you must ensure you environments ORACLE_HOME, ORACLE_SID and path are correct - as oraenv does for you.

• Why Creative Cloud libraries takes a lot of space in my computer locally?

  Why Creative Cloud libraries takes a lot of space in my computer locally?

  Just checked inside the Application Support/Adobe/CC library and taking a lot of space locally? Can I safely remove this folder to free up space?

  Library assets are synchronized and stored locally when used. It works as expected. Deletion of things will just save as missing and redownload it...

  Mylenium

• I have Adobe creative cloud and that you may have noticed that I have mu, tiple versions of programs such as PhotoShop and After Effects, take a lot of space on my hard drive. i.e. CC of Photoshop, Photoshop CC 2014 and 2014 CC Photoshop. I can uninstall

  I have Adobe creative cloud and that you may have noticed that I have mu, tiple versions of programs such as PhotoShop and After Effects, take a lot of space on my hard drive. i.e. CC of Photoshop, Photoshop CC 2014 and 2014 CC Photoshop. I can uninstall one or both of them?

  CC and CC 2014 are separate apps, you can uninstall the version that is not necessary, CC 2014 is the latest version.

• Create the backup of the database on the new server to RMAN

  I have a 1 - existing node RAC running 10gr 2 on Windows 2003. I am trying to create a backup of database on a new server running Windows 2008 and Oracle 10 g 2. Because the database uses ASM, I can't just copy data files. I did a full backup with RMAN and copy these files to the new server. I installed Oracle, but no database. I have put in place on the new box ASM.
  
  Can someone tell me how to use the RMAN backup to set up a backup of database on the new server? The production server is still in place and running, but we are trying to get a server backup and procedures for the use of a filler RMAN restore in the case of a scenario of recovery after disaster.
  
  PS. We use Standard edition, so Dataguard is out of the question. It would be nice, but the price is a little high.

  1 instance startup NOMOUNT.
  2 restore automatic backup SPFILE (assuming you have AUTOBACKUP CONTROLFILE set up on the main site)
  3 startup NOMOUNT with restored SPFILE
  4 restore automatic backup controlfile.
  5 MOUNT DATABASE
  6 catalogue copied backup files (CATALOGUE START WITH...)
  7 RESTORE THE DATABASE
  8 RETRIEVE THE DATABASE
  9 OPEN RESETLOGS

  http://download.Oracle.com/docs/CD/B19306_01/backup.102/b14191/rcmrecov.htm#i1007814

  Lukasz