Is it possible to move the \windows\installer folder? The reason why I ask is because it takes a lot of space and I want to move it to another disk with more space.

Similar Questions

• Metadata Windows 7 I tend to take a lot of pictures and I want to be able to add metadata to photos that I know what talking about photography,

  original title: metadata Windows 7

  I tend to take a lot of pictures and I want to be able to add metadata to photos that I know what talking about the picture, where it was taken, the people of marking on the photo, etc. I used the Windows 7 Explorer to add metadata to photos (the pane at the bottom of the Explorer or by doing a right click and using the properties--> details recording here). Everything's all right. But the addition of data to hundreds of photos is a very demanding task. Therefore, I wanted some advice on the following questions before that I seriously undertake this work on thousands of photos:

  1. If I add metadata to photos using the Windows 7 Explorer, and then copy the photos to another computer with Windows XP, I keep all the metadata information that I added in Windows 7 and be able to read in the Explorer of Windows XP? Or will I lose all the metadata as we can add in a specific Windows 7 format, unreadable by Windows XP? Or even that I lost a part of metadata (fields newly added in Windows 7, in case some [which?])?
  2. These metadata will be compatible in the future versions of Windows? If I upgrade to a later version of Windows (whenever it comes out), my metadata laboriously added will be present and readable as well as all the pictures?
  3. Is metadata embedded in the file or is it stored in another table inside the Windows OS? I know this because, to wire different versions of Windows, I have totally lose the metadata when I copy the photos or that it will be present in the Interior photos but will only be unreadable?

  If I lose any of my metadata on different versions of Windows, then this method of recording information of the photo seems unnecessary. If this is the case, can someone advise me the best method to save the details of the photos inside photos so that they are available (and readable), everywhere where the photo is taken or copied.

  Hi mnae,.

  If you add metadata to photos and then to copy the photos to another computer it keeps all the metadata information that you added.

  If you upgrade to a version more recent Windows information will be preserved. Metadata are embedded in the file only.

  I suggest that you first test with some files and check.

• Is it possible to adjust the kerning by default in preferences in Photoshop as you can in Illustrator and Indesign?

  Is it possible to adjust the kerning by default in preferences in Photoshop as you can in Illustrator and Indesign?

  You can save a character style that defines kerning, but you cannot change the default behavior of the PS.

  

• I am unable to stop the hosts of loading process, because it takes a lot of memory

  I am unable to stop the hosts of loading process, because it takes a lot of memory

  Hello

  Some processes have to load, however, you can use these tools to check those and look for ones that
  can use a lot of memory after loading in the Manager of tasks - processes tab - CTRL + SHIFT + ESC
  Check the CPU column.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Installed Adobe Acrobat Standard XI on 2 computers using the 2 provided licenses. I need to take this on one computer, and add to another computer in the office. How can I do this?

  Installed Adobe Acrobat Standard XI on 2 computers using the 2 provided licenses. I need to take this on one computer, and add to another computer in the office. How can I do this?

  After getting your serial number, open the Acrobat none-more-necessary > help > deactivate.

  install and activate on your other computer.

• Why Creative Cloud libraries takes a lot of space in my computer locally?

  Why Creative Cloud libraries takes a lot of space in my computer locally?

  Just checked inside the Application Support/Adobe/CC library and taking a lot of space locally? Can I safely remove this folder to free up space?

  Library assets are synchronized and stored locally when used. It works as expected. Deletion of things will just save as missing and redownload it...

  Mylenium

• I have Adobe creative cloud and that you may have noticed that I have mu, tiple versions of programs such as PhotoShop and After Effects, take a lot of space on my hard drive. i.e. CC of Photoshop, Photoshop CC 2014 and 2014 CC Photoshop. I can uninstall

  I have Adobe creative cloud and that you may have noticed that I have mu, tiple versions of programs such as PhotoShop and After Effects, take a lot of space on my hard drive. i.e. CC of Photoshop, Photoshop CC 2014 and 2014 CC Photoshop. I can uninstall one or both of them?

  CC and CC 2014 are separate apps, you can uninstall the version that is not necessary, CC 2014 is the latest version.

• Of the reasons why the contents of a form to fill out on-line can be displayed or printed?

  I created a form of 2 pages on Adobe Acrobat XPro. I sent it to specific people, and they filled, saved and sent it back. I am able to view what they typed in my monitor only, when I click on the field, but it will not print the content. Of the reasons why the contents of a form to fill out on-line can be displayed or printed?

  What you describe is typical of a PDF form that has been used and corrupted by the application on a Mac. An outdated version of Acrobat or Reader will not cause this. A less likely possibility is also corrupt forms PDF, Microsoft Reader, but in different ways than the preview.

• Thanks for your help. I can look to iCloud by car and see its contents. However I can't iCloud pictures like this to see the content, etc. This is the reason why I wanted to disconnect from iCloud. I had hoped to sign new one

  Thanks for your help.

  I can look to iCloud by car and see its contents.

  However I can't iCloud pictures like this to see the content, etc.

  This is the reason why I wanted to disconnect from iCloud. I had hoped to reconnect and see if I could get then in my photo iCloud content!

  Maybe I have the wrong approach?

  can you tell me if the Photos on my iPad and iCloud photos are one and the same?

  any help appreciated...

  They should be the same.

  To display your iCloud on your iPad photo library you're following the steps below?

  Go to iCloud.com using Safari.

  Keep your finger pressed on the semicircular arrow at the end of the URL bar.

  Press "Ask site desktop."

  Connect to your iCloud account.

  Tap the photos icon.

• Windows 8 corrupted installation TrueCrypt encrypted another disk with Windows XP

  Hello, I need help. I just installed new Windows 8 on an empty partition of the secondary drive.

  The first drive I got the previous installation of Windows (XP). Unfortunately, I forgot, this hard drive is encrypted TrueCrypt. Windows 8 now works OK, but the disc with Windows XP seems to be empty. The other partition of the disk with Windows 8 works fine.

  I have the TrueCrypt rescue disk and he managed to restore the TrueCrypt Boot, but when I try to start, he writes, that no bootable partition was found. It allows us to decipher the drive and when I start it, it seems to work, but it is too slow and I need to know if this can help. Try to restore a Volume of TrueCrypt header in Windows 8 fails ("way of wrong installation, wrong password or not a TrueCrypt Volume"). Pourrait installing Windows 8 format the drive?

  (Sorry for my bad English)

  Later: I tried data recovery, and it shows some files and folders http://postimg.org/image/9xt33kmw5/

  Hi Daniel,.

  The drive that contains Windows XP displays empty because the file format of Windows XP is FAT (File allocation table) that is not supported by Windows 8. Windows 8 uses NTFS (New Technology File System). I would say to contact TrueCrypt support to check why the description of disk takes a long time. In Windows 8 If you want to encrypt or decrypt the data, you can use bit-locker installation. I suggest you to see the following links for more information on encryption of bit-locker.

  http://Windows.Microsoft.com/en-in/Windows-8/BitLocker#1TC=T1
  http://Windows.Microsoft.com/en-in/Windows-8/using-BitLocker-Drive-encryption
  http://Windows.Microsoft.com/en-in/Windows-8/unlock-BitLocker-protected-drive
  http://Windows.Microsoft.com/en-in/Windows-8/BitLocker-recovery-keys-FAQ

• Windows Installer does not work why?

  When I try of course Windows Installer Service from services.msc file, I get an error: "error 5. access denied. "How do I fix this?

  OS: Windows Xp Home Edition SP3.

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you try the steps from the link below and check if it helps.

  http://support.Microsoft.com/kb/2438651

  Hope this information is useful.

• If running Microsoft Security Essentials do I need run Windows Defender? Is the reason why I can't start the Defender-Essentials?

  I use Microsoft Security Essentials on Vista x 32.  Security Center tells me to start Windows Defender.  I click to start, but he tells me that I have to restart my computer or manually start Defender myself.  I go to services, and it does not advocate.  It basically tells me that my system has no need currently the program or there is another reason, it does not start.  Responses tells me that for the error code of course, I met error 0x800106ba later Code it tells me to try to start it manually if it doesn't work I have uninstall Defender and need to reinstall it.  Yet when I go to uninstall programs, Defender is not listed.  I tried to install it again because it is not listed, I thought I could.  When I went to install it, it-error telling me that I have already as it came pre-installed with Vista.

  Now, my question.  Do I really need Defender since I use Microsoft Security Essentials?  Is in fact an older version almost essential?  Why it tells me to start it if it is not needed? And if necessary, why it won't start

  Hello

  Be sure to check in the MSE Forums.

  Answers - MSE Forums
  http://answers.Microsoft.com/en-us/protect/default.aspx

  ------------------------------------------

  Windows Defender features are included in MSE, defender of loading would be redundant.

  Windows Defender antispyware =

  MSE is antivirus + antispyware.

  Then think about MSE as Windows Defender with more added (which is).

  Check this box:

  Start - type in search-> find MSCONFIG in top - click right on - RUN AS ADMIN

  Startup tab - disable Windows Defender (if the list) and APPLY / OK - REBOOT

  This should stop loading Defender.

  ==========================================================

  If necessary after the foregoing:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  Check the default services and dependencies to ensure that they are running.
  http://www.blackviper.com/WinVista/services/Security_Center.htm

  ============================================

  Security Center incorrectly reports, or try Windows Defender
  Start incorrectly, or both.

  Security Center not related anti-virus or firewall State correctlyhttp://www.winhelponline.com/blog/security-center-not-reporting-anti-virus-or-firewall-status-correctly/

  How to fix Vista Reporting incorrect information Security Center
  http://www.Vistax64.com/tutorials/195736-Security-Center-not-reporting-correct-information.html

  How to disable or enable the Security Center in Vista
  http://www.Vistax64.com/tutorials/67737-Security-Center.html

  This thread might help as it might be a permissions problem.
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/3d2049ae-4581-439b-8E15-3f603f5c60f0/

  =====================================

  Troubleshooting of Windows Defender
  http://support.Microsoft.com/kb/555957

  "%ProgramFiles%\Windows Defender\MsAsCui.exe" is the folder of the default Defender

  Start - type in the search box-> Windows Defender - find top - make a right click on it.
  RUN AS ADMIN

  If no joy using Start - computer or Windows Explorer to access this folder and create a
  Shortcut to put on the desktop and the Start Menu. You can also right click on a shortcut this and
  see if they point to here.

  Goal
  "%ProgramFiles%\Windows Defender\MsAsCui.exe".

  Start in
  "%ProgramFiles%\Windows defender.

  How to enable or disable the Windows Defender
  http://www.Vistax64.com/tutorials/93118-Windows-Defender-off.html

  --------------------------------------

  Maybe something here if necessary:

  What is display / causing the error message? Some anitvirus/security/antispyware products can
  cause this error. On those who use you, including those that your never had even those
  uninstalled (the remnants can cause problems). McAfee is just an example of what many can do.

  Start - type in the search box - Services - find top - Right Click - Run as Admin

  Windows Defender - value STARTED and AUTOMATIC

  or set MANUAL and STOPPED if necessary

  Fix for the problem of 800106ba.
  http://support.Microsoft.com/kb/931849

  Error (an example) of McAfee report.
  http://service.McAfee.com/faqdocument.aspx?ID=TS100610&lang=en_US&prior_tid=2&AnswerID=16777216&Turl==http://KB.McAfee.com/InfoCenter/index?page%3Dcontent%26id%3DTS100610%26actp%3Dsearch

  Check also:

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/574fb871-034C-4B42-B800-328af16a9177

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Diagnose the reason why I can not run (or even remove) an exe (JDK Installer)

  I have a portable Win7 provided by my company.  I'm supposed to have "admin rights" on the box.  In the past I have never had any problem with the installation of things.

  Today, I tried to download an installer for a newer version of the JDK.  After downloading the file, I tried to run it normally and it seemed that nothing happened (just return at the prompt).  I then tried to run it from a cmd, and it also seemed to do nothing.  I then even tried to remove it with "DELETE", and it says "access denied."  It was on a cmd run with 'run as administrator '.  I get the same results with a 'normal' cmd

  I checked that I could delete the other files in the same folder as the exe file.

  I then tried to inspect the security properties of the file.  From everything I see, I have 'Full control' on the file, including "read & run ' permission.

  I then installed the tools from SysInternals "AccessChk".  I just ran this without any options on the JDK installation file and an another exe in the same folder that I checked that I can run (although I have not tried to remove).

  I can't see what follows (with some info that have been omitted):

  ---------------

  JDK Installer:
  R the world
  RW .
  RW \Domain Users

  Another exe in the same folder:
  RW NT AUTHORITY\SYSTEM
  RW BUILTIN\Administrators
  RW .
  RW S-1-5-21-

  ------------------

  What could go wrong here?

  Hello David,.

  The question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet forums.

  TechNet Forum
  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itproappcompat

  Thank you

• backup of the database server takes a lot of space in repository

  The heart is on a R2 server in 2012. This is a new installation of 5.4.3.106 there is a base.

  I'm reserved system backup and the C drive.

  Drive C is 57 GB.

  I made a deposit of 160 GB on a UNC path to somewhere down this server. The backup was made on 29/04/15 07:58. It's 57GB.

  The repository is full now. There 3 days.

  No doubt.  Deduplication default cache is stored on drive C and by default is saved every hour.  It's quite a lot of paperwork and is what is backed up.  Especially if you have size and have a cache of large deduplication to manage your repository.

  You can move that cache of deduplication for another drive and that will help there as it is very likely.

  I don't know if you get something to protect the cache of deduplication, since it is not transferable in any case :(

• MY c DRIVE is nearly full. Can I use my external hard drive because it has a lot of space

  My ' it shows only 123 MB available disc. I have a 500 GB external hard drive, but am not sure how to use it to free up space on my drive "C".

  Any help would be much appreciated.
  Roy Warner

  Hi Roy,

  Thanks for posting your query in Microsoft Community.

  The description of the problem you have provided, I understand that your C drive is full and trying to move some information on external hard drive.

  I will certainly help you in this matter.

  If you have data files in the C drive, you can go ahead and move them to the external hard drive. You will not be able to move the files to the program on the external hard drive.

  In order to get the free space in C drive, you can go ahead and uninstall the software bit that you use it often.

  See the link.

  http://Windows.Microsoft.com/en-in/Windows-Vista/uninstall-or-change-a-program

  You can also delete files using disk cleanup, which would reduce the number of unnecessary files on your hard disk to free up disk space.

  See the link.

  http://Windows.Microsoft.com/en-in/Windows-Vista/delete-files-using-disk-cleanup

  If you face problems more when working with Windows Mail on the Microsoft Community Forum.