Batch import model to a lot of FrameMaker files?

Similar Questions

• Model used within a doc FrameMaker file?

  Hello

  
  I hope it's a quick and simple question for a person.

  How to make an * existing * FrameMaker file and determine what, if any, model file was used to create?  I have not found a dialog window which allows me to determine what template file has been used.

  I'm not creating a template file or I have created a new document in FrameMaker.  I just want to open an * existing * doc FM and determine what template file has been used in its creation.

  
  Thank you.

  Dave

  You can not.

  FM can import content formatting other files and the process is additive, so a specific document can be created from a combination of a number any of "templates." Any FM file can be a model for all other FM files.

  You will need to compare the features in the doc FM file in your template file (s). There may be something unique on the reference pages that can make this task easier. A properly developed model must be documented and contain enough documentation internal to this obvious failry.

• FrameMaker 11 crashes when importing model

  I create books of 100 + documents. When I try to import the template to all the documents in a book, FrameMaker 11 stops working. I tried important model to small groups of documents (10 or less) and it hangs stil. Sometimes after trying this with the same group of documents more than once, it will finally work. I'd rather not have import the model into every individual in the book documents because it's a lot of time. Is there a way to apply the model on the entire book quickly without it crashing?

  There could be a number of reasons that this happens.

  All documents are in format FM11 or are they older versions of FM? They have the latest version. Also what your patched to 11.0.2 FM11?

  These documents contain graphics imported by copy? Maybe it's access to the resources on your computer. Make sure you have plenty of space in your TIME zone system. In addition, depending on what type of anti-virus software you have, try back composition or tell compltely ignore FM files, in case it is too aggressive and keep a control file all FM is trying to change with the model.

  Open all files before you apply the template. This will also give you the chance to gracefully back - UO if you do not want the same tempalte applied to all of them, that is, you explicitly to save. IF crash you while opeing the files, it implies either a question of resources, or possibly a file corrupt (s).

  Try a MIF-wash on files where there is some cruft in there.

• Can I import model bpmn of Aris Express in BPM Studio?

  Hello everyone.

  Can I import model bpmn of Aris Express in BPM Studio?

  Not familiar enough with Aris Express, but in earlier versions of the 11g you can use an extension of guardian in JDeveloper to import some different models.

  From PS5 and PS6, it is possible to import without the extension, and this can be done in the BPM project Navigator view.

  Right-click on your BPM application and you can select "import templates", the service supports Oracle Workflow, Visio, guardian and XPDL, which is hopefully a format that allows you to export to Aris.

  It will be useful.

• Cannot save/writing Framemaker files

  Hello

  I suddenly had a major problem - I can't save or save as Framemaker files.

  Specifically, I use Framemaker 9 (latest patches) under Win XP/SP3, using parallels Desktop for Mac on my MacBook Pro 17 "(8 GB, 2.8 GHz Intel Core 2 Duo, Mac OS 10.6.2).

  I can record on my Windows virtual disk, but if I try to save my Mac world, I get an error that says: "the < path > \\.psf\Home\------< file_name >.» FM. De1 written FrameMaker can be damaged. There's a .lck file, but cannot save the file FM, even with a different name.

  I tried to save in different formats (to check that it is not a problem of permissions/network). I can record in .html, .xml, .pdf, .txt, .rtf. I can't save in the formats based on the framework (MIF, FM, previous versions).

  I suspect that the problem after updating to the latest version of Parallels Desktop. Stupid move. He barfed at the end of the upgrade, but I thought that after restarting, things were OK.

  I also had a hard drive problem on my Mac (various catalog file errors) after having ejected a key USB recaltitrant. Important headaches. Yet once, thought it was all fixed after disk utility and fsck checks. Maybe not. Still a strange question however. I don't seem to remember having something like this before. Anyone got any ideas?

  Martin Ley

  Martin to the dash dot com

  The folks at Parallels have corrected this bug.

  http://Forum.parallels.com/showthread.php?t=100516

  I just installed this hotfix Parallels Tools, which has been created specifically for our problem. He seems to have supported the problem for me.

  Post edited by: Marcia Johnston
  (Updated the text after trying the fix and to find that it worked for me.)

• Where are the Source FrameMaker files

  I am an experienced user of FrameMaker, but have never used RoboHelp. I am to evaluate the Suite of Comm Tech for a customer. I got using the Guide of the evaluator to import FrameMaker files and deploy a support system. Then, I created my own project and followed the instructions in the blog of Adobe to import FrameMaker files. Now, I'm trying to follow the instructions in "Updating FrameMaker linked files" Adobe blog, which explains how to upgrade the style mappings. However, I cannot find or do not recognize the FrameMaker files that I imported into RoboHelp.
  
  Help?
  
  Thank you
  Carol

  Ok. So I had not imported anything but the .book file. Off the hook on...

• Import contacts in Windows 8.1 .csv file MAIL app

  I have a new laptop, have a problem with the MAIL APP: can't find how to import my contacts from the contact.csv file that I saved in my old pc running VISTA. The mail client was LIVE MAIL.

  Went to APP CONTACTS but could not find the way to imprt leave a file, but only from facebook, twitter and so on.

  Can help?

  Thanks in advance, Tom

  Yes, I solved the problem, sorry for the late update

• importing of .pst OUTLOOK in Vista Mail files

  I have tried to import Vista Mail, try to import my old email saved in OUTLOOK from an XP based PC (.pst files).  I'm migrating from XP to Vista on a new computer.

  Import Vista Mail function fails and gives me the message 'Messages cannot be imported from the MAPI client', '.. '. It is not installed, or an error occurred... »

  Vista has absolutely no idea of what to do to solve this problem.

  Is it possible to import saved .pst files?  I fso, how am I the question MAPI interface?

  Thank you

  Windows Mail cannot directly import e-mail messages to a .pst file that is created by Outlook from Microsoft Office. You must install Microsoft Outlook, import the .pst files and then import them to Windows Mail Outlook messages, even if Outlook is installed and running. Carey Frisch

• I imported the pic of a flash drive files in Movie Maker. When I return to my project overnight the pictures do not exist.

  I work in Windows Movie Maker.  I imported the pic of a flash drive files.  When I return to my project overnight the pictures do not exist.   They don't last load because the 'not found' files, mysteriously images loaded back up everything.  I have no idea of what I did, but they found themselves back much to my relief however, today, I'm not so lucky.    Tonight, it's the same thing, but the only way I can get the pictures if I find the missing photo 1 by 1 by right click and search for my flash drive.  I have my flash drive in my computer when I started working on my project again. I put a dvd set for my nursery and I have many many photos and I can't click on each of them.  Please give me some useful advice soon so I'm not crazy!  School is out next week! I know that there must be an easy fix.

  Thank you very much :)

  Dana

  original title: Windows Movie Maker

  What source files have been moved, deleted,
  renamed or are otherwise inaccessible... it
  will be red Xs in the Movie Maker Collection
  Pane. And you're right... If files are always
  available path may be restored with
  a right click / Browse.

  Given that the Movie Maker project file does not work
  Archive copies of your original source files...
  It would be preferable that you copied your files to a
  folder on your hard drive and import them into movie
  Machine from here.

• How can I recover a .ts file that will not import into Movie Maker? The .ts file works fine in Media Player... help

  How can I recover a .ts file that will not import into Movie Maker?   The .ts file works fine in Media Player... help

  Hi Stuart,

  We understand that you try to import a .ts file to Windows Movie Maker. However, Windows Movie Maker does not support this file type. You can click on the link below for more information on what file types are supported by Windows Movie Maker:

  Can what types of files I use in Movie Maker?

  Kind regards.

• I can't import photos into lightroom free trial cc/6 2015. Lightroom can see all my pictures from my SDHC card and allows me to implement the import, and then clicking import it says that all the selected files (245) has not can be imported as they could

  I can't import photos into lightroom free trial cc/6 2015. Lightroom can see all my pictures from my SDHC card and allows me to select and configure the import, and then clicking import it says that all the selected files (245) has not can be imported because they could not be read. I use MacBook Pro 2015 OS X Yosemite 10.10.3, photos taken with Canon G1 X Mark II. Any ideas?

  This message indicates that you have not permission in writing to the destination directory.

  So:

  1. Determine the destination directory... go in the Lightroom import dialog box and note the location of this directory specified on the right side under "Destination".
  2. Go to your operating system and change the permissions on this exact directory have WRITE permission.

• Problems to import my Drone Elements first Bebop MP4 files.

  I have problems to import my Drone Elements first Bebop MP4 files. Original file seems crisp and beautiful, but after importation of Premiere Elements, all sorts of 'ghosts', glitter details etc. appears. Using PC and import (self) normally. Please help, because the result is not at all satisfactory. Help, please.

  First 13 elements should give you excellent results with STROKE in 1920 x 1080 video.

  What version of Premiere Elements do you use?

  I see that the Bebop shoots in 1920 x 1080. What is the format of the video?

  In most cases, Premiere Elements will automatically set your project according to the specifications of your video - but sometimes this does not happen with MOV files. Go to the Edit menu and note the settings of the project. The program provides up to 1920 x 1080 at 30 fps?

  Have you ensured that you have the latest version of Quicktime, by the requirements of the program?

• The new Adobe Reader software has lost a lot of my files.

  The new Adobe Reader software has lost a lot of my files.

  Hi Doug,.

  Do you want to take a peek at the following discussion to see if it solves your problem?

  The lost files after the update to the new version

  Thank you.

• Adobe offers an application to perform a batch of raw Canon CR.2 of TIFF files files conversion?

  Apply Adobe Photoshop for astrophotography requires many images to convert a CR.2 raw file into TIFF files. Adobe offers an application to perform a batch of raw Canon CR.2 of TIFF files files conversion?

  Thank you.

  Menu file > Scripts > image processor.

• How can I change the unrecognizable FrameMaker file format?  Why has he become unrecognizable after changing the file name?

  I update an existing project in the FrameMaker10, which is located in a structure of book.  I changed the names of the files in the directory, they upgrade 11 FrameMaker and saved.  When I try to add them to the book (whose name I also updated) a problem for some files. When I try t add them to the book file, I get an error message that says that the book file is unrecognizable.  (It allows me to add it, but it appears in the file book with an icon that has a blue "M" in there.)  Why is that happening and how can I change these files to normal FrameMaker files?  Thank you.

  Try to open the problem files using a text editor or viewer of files to see what the first bytes contain. Contains all the binary files valid FM FM 11 in the first bytes of the file.

  During the updating of the books, it is sometimes better just to create a new address book file and add files to it.

  When you rename files in a book, changes at the level of the system will break any links/cross-references between files, so it is always best to use the option rename book in the file to change the names of files FM. This will keep the correct links.