Battery compartment

Similar Questions

• How to disassemble CQ57 without access to the battery compartment

  So I asked How to get the lock take off or someone for pointing me to a picture of the battery locking mechanism and same day where 'experts' no one answered... while I can't to the screw in the battery compartment, how disassemble to replace a hard drive on the front of the machine?

  Thank you

  When I had the problem with stuck lock, I took a knife with a thin blade and gently worked at the edge of the battery up, working my way along the whole of the edge until it is finally released. This was done on the inside edge-same side latch is on.

• How to access the battery compartment?

  I have problems to open the compartment to battery on my Microsoft Bluetooth Notebook Mouse 5000 v1.0. I can't locate the release button. Please help :) Thank you

  I have problems to open the compartment to battery on my Microsoft Bluetooth Notebook Mouse 5000 v1.0. I can't locate the release button. Please help :) Thank you

  ========================================
  I have no personal experience with this mouse but the
  following article offers some instructions... maybe it would be
  be worth a visit:

  How to troubleshoot a Microsoft Bluetooth Mouse 5000 mouse
  http://www.ehow.com/how_5200186_troubleshoot-Microsoft-Bluetooth-mouse.html

• Battery compartment that charge with lightning connector

  In addition to the new Apple smart battery case, is there another type of case for iPhone 6 that recharges the battery or its own pack by lightning connector? All the ones I've seen up to now use the Micro-USB port to charge.

  The connector of the lightning is authorized by Apple to most only use it.

• the door of the metal piece in the battery compartment that connects to the positive terminal of the battery fell - how to connect them

  The metal piece on the door has come loose, so the positive end of the battery can't touch to give the power of the mouse.  I need a picture of the configuration or a diagram of how this piece of silver can be attached to the door of battery on Microsoft Wireless Mobile Mouse 3000 model 1359

  Hello

  If there is a warranty issue, he has a 3-year warranty.

  Wireless Mobile Mouse 3000 - has a 3 year warranty
  http://www.Microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=113&active_tab=systemRequirements

  Microsoft Hardware Warranty Info.
  http://www.Microsoft.com/hardware/warranties.mspx

  You have 90 days while it is under warranty and if support from the date of the first event (call)
  defective they usually replace it free of charge for you in the United States.

  Hardware support of MS and warranty claims
  1-800-936-5700

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Location in the battery compartment

  Hello

  There is a 'white' white (I think) in a slot in my T400 compartment. There is a "tongue" attached, it seems to be the form of SIM card. I have found no further information... It's a new laptop (T400, model K-22 6475), but I wonder if anyone knows I'm good? It is a port of type SD? Or what it is - this? Why is that?... Can you please help?...

  Thanks in advance.

  SIM card slot is connected to the motherboard, but it is redundant, until you install the wwan card.

  You can check if your laptop came with the wwan card by entering your model and the serial number of your laptop in the next web page.

  http://www-307.IBM.com/PC/support/site.WSS/product.do?doctypeind=10&template=/partslookup/partsLooku...

• computer laptop 15-p009nk: touch the battery compartment

  Hey, I just realized I can run my laptop with no battery that is good to increase the battery life that I read on various Web sites, although battery HP leave a huge hole and I was wondering if its safe to put the laptop on my lap, could touch the connector of the battery (metal thing) electrify me or something?

  Thanks in advance!

  Contacts work pretty well as any other device that accepts batteries-cameras, phones, radios, etc. Contacts receive energy from the energy of battery output, not. Put on your lap has higher risk of blocking the vents and causing overheating as the danger of the contacts.

• My Apple TV remote 3rd generation A1294 doesn't aluminum A1394 does not work properly, the battery is and I have tried all the resets including factory reset.

  My Apple TV remote 3rd generation A1294 aluminium does not work properly, battery is good, and I tried all the resets including factory reset. the battery compartment is clean.

  You don't say what you mean by not working not properly, however...

  Your Apple TV can become affiliated with another remote control. Hold the remote control close to and pointed on the Apple TV, press and hold the menu and rewind buttons together for 6 seconds or until you see an icon of the chain broken on screen.

• L850 - 1 5 satellite replacement battery - do not load and not detected!

  Hi, I recently bought a replacement battery for my Satellite L850 - 1 5 as the stock battery was fried. The stock battery couldn't hold a full charge for more than 10 minutes.

  The replacement battery fits perfectly into the battery compartment, but the laptop does not light when the battery is in. It is not even turn on if I plug the charger ONCE I insert the new battery.

  Basically this new battery does any record with the laptop, it won't load or anything... Is it possible that it's just a battery of spleen?

  Any advice or help is massively appreciated!

  Thank you

  > It is not even turn on if I plug the charger ONCE I insert the new battery.

  In my opinion the new battery isn't fully compatible.
  Probably its a cheap Chinese product and not genuine battery out for the L850 series.

  I have no other recommendation for you than buying new, authentic and fully compatible battery.

  The battery 6 Toshiba PA5024U-1BRS (and PABAS260) must be compatible.

• How to access the CMOS on Satellite 110CS battery?

  got an old Satellite 110CS--who need a new CMOS battery... anyone know how access the battery!

  Hello

  I studied in the internet for some instruction, but it is a very old machine, and there is not a lot of s information on the replacement.
  But some people in the net replaced the RTC battery on a similar unit.
  To remove the RTC battery, you must:

  1 turn off the computer. Unplug the power cord and all external cables
  connected to the computer.

  2. remove the battery, the PC as an option, the memory module option card, HARD drive,
  Auxiliary battery, keyboard and VGA card.

  3 turn the computer over and remove the three screws from three corners of the bottom cover.

  4. remove the four screws from the battery compartment.

  5 turn the computer over and remove back cover faceplate so superior you
  can disconnect the cables.

  6 disconnect the cable from the battery for real-time clock of the PJ3 on system board
  and remove the battery.

  Hope it helps a little but if you don't have any experience you shouldn't t remove anything.
  Ask someone with more experience or contact the ASP.

• RM-yd033 change battery

  I can't my remote sony to slide open so that I can access the batteries. I tried to do everything the person in this video of youtube said, but darn the rear just don't slide. Does anyone have pointers?

  http://www.YouTube.com/watch?v=RwGvuQFaDE4

  Follow the steps below to open battery compartment:

• Re: battery not detected

  computer: hp pavilion g6

  Windows 7 32 bit

  My computer does not detect the battery.  I tried new batteries and batteries, I did the hard reset, I can't update the BIOS because I did find an update for this machine.  I made sure there is no dirt in the pins.  I have reset the BIOS default settings.  What is NOW?

  A lot of people, here's the deal.  It seems that a few screws have been protruding too far way from the holes in the battery compartment, preventing the connection of the battery.  Now, for a time after this discovery, the stack would be detected only part-time.  I think that it was a function of transport the computer and possibly have enough play in the compartment and then do not establish a connection.  The end, and to this day, the battery works as it should.  I'm still not sure why he only worked part-time for a while after the screw problem was initially discovered.

  Yes, we took the computer part to solve another problem. an overheating problem.  I put 'Arctic 5' compound on some components and blow up the computer outside air to a vacuum cleaner.  To this day the computer stopped not because of the heat.

  Yes, I know, the warranty is voided.  Well, the warranty was long since gone in the first place.  It's probably why I couldn't find an update of the BIOS of the computer.

• Battery loose on new T420

  Hi all

  I myself recently got a new T420. Everything except the battery is OK. For some reason any battery 6-cell (55 +) not closely attached with the laptop. (Yes, I move the 'switch' on the 'lock' position). the battery is a little loose, it moves clearly and you can hear it clicking on if I move the computer. I guess it is normal to have some 'soft' but I think it is more 'normal' (and usually I try not to pay too much attention to minor details, but this one is bigger than I can possibly ignore).

  Someone of you have similar problems? Have you managed to fix it?

  -af

  Please note that the solution presented in my photo above turned out be not quite perfect: I noticed that the implementation of the Ribbon to the center stack is part of the flex, pressed by the battery case.

  A better solution is to divide the pile into two piles placed on the left and right of the battery compartment edges: the case is much more rigid. The battery is supported in 4 points in this way, with no sagging.

• Extraction of EOS Rebel XS battery failure

  Open the lid of the battery compartment and turn the battery lock there is no extraction of usual battery at all... It remains in its original position in the compartment. Please notify

  Glad it worked.

  I really don't think it was from swelling, this is the area of contact plastic which is too tight for the contacts of your camera.  I had two batteries for my 450 d who did this, and it was a question well documented with many generics I found on Amazon.  I kept using mine, but if he comes to you, they are pretty cheap to replace.

  I just created a zipper of flossing as described above.  Alternatively you could just leave your little Ribbon on it (even if the glue could weaken over time and detach).  The good thing about flossing, it is pulling from the bottom, instead of the upper part where the glue is attached.  There was plenty of room in the battery compartment to the tail, and I never had any problems with it.

  In addition, if there is a label on the battery, remove it.  That fixed the problem for many online.

• Battery wireless controller

  OK, I admit, I am not too clear, but this is the first time that I have been unable to figure out how to install a battery. I just got a camcorder VIXIA HF G30 and was beaten by the wireless controller battery compartment. No matter what I try, I can't get access to insert the battery. You would be grateful for the help, thanks.  Ted

  Hello tevans9129,

  The WL - D89 uses a CR2025 button-type battery.  It is located behind the battery tray which slides down.  To open, hold the remote in the right hand (covered on his back) and hang the nail of your left index finger in the small lot, which acts as a spring and pull toward you.  At the same time, use your right thumb nail to pull down the battery broke.  This will allow you to change the battery.