BBUI & 2.0 Webworks - just don't get it

Similar Questions

• I can't access my laptop and ive rest my password 5 times now and its all just don't get?

  I bought a toshiba laptop about a year ago and have used it only 4 or 5 times! I had no idea how to set up a friend of a friend PC I did for me. I'm went over her every time he has seemed to hit on the passowrd so I reset a live.com on my phone and it wopuld so let me in. ive now not used my laptop for about 6 months [I use my phone for a bunch of stuff] and now it wont even reset. I tried 5 times now and I still can't get. I get the following message

  You cannot connect to your PC at the moment. go to the live account com to solve the problem or try the last password used on this PC.

  I've been to live.com and all I get is change password so I do and it just always let me [I rebooted my PC with updates after each change of Word/p too... any ideas how I can get in? thx]

  If the computer is not on an internet connection, he doesn't "know" the new password you want to set on the Web site.  If you need to use your old password.  If you forgot what was the next oldest, here are your options: http://cmdrkeene.com/reset-forgotten-windows-password

• Just don't get made for DVD burning

  With the help of first elemtns 12.  I have the video to MP4 I burn to DVD.  No affeect made the MP4?  Rendering seems to create a new MP2? file that I do not understand if the rendered MP2 file is used for burning to disc.  Not worried about burning for lack of time the most beautiful video.  Thank you

  ABB654

  A video file has audio and video compression with a file extension that

  represents the format that wraps the compression. Your "MP4" could refer to the video compression or the

  file extension. It makes a difference. And, no matter what resolution, export settings will define the export.

  Suppose the AVCHD (MP4 AVC/h.264) video compression and that the file extension is .mp4. Let us again

  Assume the properties of this file tell us that the size of the image is 1920 x 1080 @ 29.97 progressive frames per second.

  If you burn this chronology widescreen DVD-VIDEO on a DVD disc in Premiere Elements, the final product on this disc will

  to be widescreen DVD-VIDEO on DVD (720 x 480 @ 29.97 images per second interlaced). Video files, DVD-VIDEO

  structure are MPEG2. VOB. These are the DVD-VIDEO format standards, without changing them.

  Your alternative is to burn this Assembly on a DVD with the help of publish + share/disc/AVCHD, then your DVD could have the AVCHD format

  on DVD (1920 x 1080 @ 29.97 images per second interlaced). The AVCHD format video files are AVCHD.m2ts.

  AVCHD on DVD cannot be read on the track of the Player DVD TV mill. whereas the DVD-VIDEO to DVD disc.

  This is an overview.

  RTA

• I just bought a keybboard ultra thin logitech for iPad air. It has a port for a small cable, but no cable in the box. What is the port for, and what don't get me?

  I just bought a keybboard ultra thin logitech for iPad air. It has a port for a small cable, but no cable in the box. What is the port for, and what don't get me?

  Have you tried the Logitech support site?

• Hi, I just bought Photoshop and I don't get the link to install it

  Hi, I just bought Photoshop and I don't get the link to install it

  You bought subscription CC?

  In the affirmative. You can check the link below:

  Download and install Adobe Creative Cloud apps

• Norton Internet Security can't scan SSL email use. How can I ensure that I don't get a malware or a virus by opening an email in Thunderbird?

  Norton Internet Security can't scan SSL email use. How can I ensure that I don't get a malware or a virus by opening an email in Thunderbird? I read that you don't have to click on a link to get malware, but that some e-mail may trigger the malware just by opening and reading. Any suggestions to prevent the outbreak of malware emails? AOL Desktop software has its own built-in email scanner, but I am trying to get away with their software and to rely only on tuberculosis.

  Thank you

  There are many aspects to this question.

  First of all, by using SSL or TLS to send and receive emails is important because it prevents others from sniffing your login email. Especially if you use a device over wi - fi or on untrusted networks, it is essential, because if others get your email IDs, bad things can happen.

  Of course, by using SSL or TLS with your mail server also protects the content of your email being captured by others, so it's good also.

  Secondly, you are right that there may be threats to security in E-mail other than the attachments, even if attachments are usually the most dangerous. Your antivirus must protect you against bad attachments as to open them, they must be written to disk in a temporary folder, and your AV software jumps into action whenever a new file is added to the disk. You can also hedge your bets by using a two step approach: first save the attachment to disk and only after she survives the real-time AV scanning and then run it in the appropriate application.

  Sometimes the content in the body of the message can trigger a vulnerability in your software e-mail or a plugin. As these known vulnerabilities, Mozilla is updating its software, but there always seems to be new problems discovered and it will never be perfect security. I don't know how useful email Scanner is for this problem.

• I don't get a warning when I delete something and would like a?

  When I delete (say a shortcut to my computer icon, or a file, etc.,) I don't get any sort of warning or something saying 'this will delete the shortcut but not the application' or something similar to this - it's just BOOM gone.

  I'm used to get a warning dialog box open giving me a second chance to change your mind.  Is there a way for this light somewhere?  Thank you

  Hello

  Please try a few simple steps:

  (a) right click the 'trash' on desptop,

  (b) select "Properties".

  (c) tick the last square,

  d click apply then OK

  Kind regards.

• I don't get my firmware or software updates. I see that someone has registered my computer as a workgroup computer and I have no right administrative no matter what I do

  No update software, no firmware updates...
  All parameters must be set up whenever I connect... Security etc...
  There Samss and about 15 svchost.exe, WUDFHost?, Netman, homegroup x 2, amd Blutooth?

  I reconfigured Vista 3 times and installed a clean copy of 7, but it must be in the BIOS or illegal product? The two return to the initial setting. (even after I reconfigure my hard drive). (I can modify manually on each file and even in the Panel administrator rights, but each change back!) I believe that when I shut my computer down start installation has been reconfigured with a backdoor.exe.  How can I get this person from my computer! I tried all the spyware, malware, etc... but it does not detect the "domain servers with functions of remote logon" and spies. Also, I used my personal card broadband since the date of purchase, but I don't really use this card that my supplier tells me. I'm tunnelling through their server. (Still a thing... they live 20 feet away!) Help!

  Wheretostart,
  I'm a little confused about what exactly it is you are having problems with and are trying to accomplish.  However I will try to answer the items you listed.

  1.) your BIOS update is something you need to do by using the machine to motherboard\PC.  They will provide the update to the BIOS and would be able to provide assistance to that.

  (2.) what software you are trying to update?  If you try to update 3rd party programs, then you will need to check with the software manufacturer for updates to the software.  If you want to update Windows, and then run the Windows Update program that is located in the section of all programs from the Start Menu.

  (3.) where you see these processes and how are you trying to start?  Also copied the names of them exactly?  I'm unable to find information about most of them.

  4.) it's always good to be protected but having more than one installed virus\malware can cause problems.  You must make sure that only your program main virus has anything from when Windows starts.  Also I would recommend do not use Registry monitoring programs.  Sometimes they can do more harm than good.

  5.) If you did a clean install of (I assume) Windows 7 and have not installed all the programs, then you must run the System File Checker to verify the integrity of the operating system.  If you have already installed other programs then I suggest running a clean boot and check the results.

  6.) don't know what you're trying to accomplish here.  BIOS will not help you to partition your drive.

  Finally, if you're just trying to get your system up and running without virus here, is what I would do if it was my computer:
  Disconnect from the internet.
  Factory restore; Download the system to the status of day a "out of the box.
  You may need to connect to internet to register Windows, but then I would unplug again.
  If at this point you have an upgrade to Windows, I would then install.  And I would use custom installation so that it does not update the files in Vista but in fact move in Windows.old and install everything from scratch.
  Once Windows 7 is installed, I connect to the internet.  Windows registry, run Windows Update, until there are no updates available. Then, install an antivirus program and make sure it is up-to-date.  You can then install programs and update drivers\software.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "" Just had something appear on my desktop - Windows XP Professional "' and that 'Build' is stated below. Cannot move and would be just as quickly get rid of it. One

  "" Just had something appear on my desktop - Windows XP Professional "' and that 'Build' is stated below.  It is in the lower right corner and watch whatever I chose.  Cannot move and would be just as quickly get rid of it.  Don't know how it got there.  Any help would be great!

  ALL TAKEN CARE OF-FOUND THE ANSWER AFTER HAVING POSTED THE QUESTION

  Hello

  I suggest that you check whether the version of Windows XP installed on the computer is enabled or not.

  Check out the link provided below for more information

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890

• When I had the previous version of bit torrent, I had no problem at all, I downloaded the latest version of 721 and it has not worked since what can be done to get it working?

  When I had the previous version of bit torrent, I had no problem at all, I downloaded the latest version of 721 and it has not worked since what can be done to get it working?

  I just downloaded and installed IT - no problem.

  Make sure that the firewall is not trying to block it.

• Passport for blackBerry that I don't get paste any word or text on google translator

  Hi all!

  First of all, I would like to say that I am happy with my new passport of BlackBerry, it is extraordinary and elegant, but its os 10 should be updated from time to time despite of Android OS. Everyone here should at least know the news...

  Well, I'll see... as I wrote on the subject, I don't get paste any word or text on google translator. Just copy-taste function is malfunctioning in some sites in my opinion.

  Please could someone help me?

  Thank you in advance.

  Kind regards

  I'm not sure.  I'll give you my suggestion, followed by the justification.

  First of all, try to restart the device and then try to paste again.  If this solves the problem, read more.

  You should be able to touch the screen inside a text field and then release and the device then displays a small icon which users click to paste.  One of the reasons for which the icon does not appear is because there is nothing to paste.  First make sure that you cut something first and if you think you have done, double check.  Also, try to paste into an email to project or a note in do not forget to check that you can paste it into a different text entry field.

  Paste the icon may not appear because the site does not allow to stick inside the field.  This can be found in the case of a password entry field sometimes.  But I wasn't expecting for a case as in your example.

  So, if you have restarted and also makes sure stick work in other applications, try the following.  1 type something in the text field.  For example, type xxx.  2. touch and hold on until xxxxxx xxxxxx is highlighted and the small window with the dough as one of the actions is displayed.  3. tap paste.  This will replace xxxxx with the content you are pasting.

  Some password fields, you cannot paste.  For example, if you copy a password or code officer password or another source and try to paste into one of these areas, the icon stick will not appear.   However, something striking in the field and select and paste above are a way around.  Your situation is not exactly the same, but perhaps the proposed trick work.

  If you paste wrong in any field, and restarting the device does not solve the problem, then we expect more deep.

• Cut video - I don't get a red "arrow" for garnish

  I am admittedly a newbie with application, and I just want to cut a video clip. I worked with Corel Video Studio, so I'm somewhat familiar with video editing.

  I watched several video tutorials on how to do this in the APP, and they all show the user at a given time, hovering over the pliers to cut. The arrow of the mouse turns into a red arrow, who is then dragged to the desired location, where it is removed. However, when I hover over the clip I want to be ready, I don't get a red arrow - just an arrow of left/right split that is not red. It is aggravating - I do the same thing they do, but I do not understand what they are getting. So I'm stuck right now, waiting for someone to help, and if all goes well dumb down of their directions for me so I can better understand what to do, point by point.

  Thanks for any help.

  Found.

  The clip that I wanted removed was so long as she continued to beyond the window, in that I was looking for. I had to drag the rear horizontal scroll bar to see the beginning of the clip. I didn't see the before - just start where he started in the visible window. Once I went to the very beginning, I saw the red arrow. I hate the things.

• I don't get extract PSD DW...

  I've been interested in PSD > DW and have not really paid attention to extract up to now.

  However... I just don't understand.

  I predicted it would be a tool to properly convert a HTML/CSS PSD without a lot of manual work

  However, even in the video here, not only did they begin with "already done" in design mode (page seems to have already existed, wait for the content...) but the very first thing demonstrated begins - style text - text already in place and updated styling does not work yet, because the text is obviously formatted differently how it appears in the PSD.

  Can anyone shed light on a little here? It is even working in research?

  CAN a PSD in fact be 'converted' rather than rebuild a piece at a time?

  Thank you!

  Andrew

  CAN a PSD in fact be 'converted' rather than rebuild a piece at a time?

  # The only thing you can do is to get the images and use the colors of the DSP to the selector of drew.

• Why do you say that the FACT table is off standard? I just don't understand.

  Why do you say that the FACT table is off standard? I just don't understand.
  
  According to my understanding, normalization is the process of getting rid of redundant. So, the fact table have redundant. So how is it that they say it is off standard.
  
  What dimension tables? They are also OF normailzed?
  
  Can you explain in words simple pls.

  Fact tables are generally standardized.

  Dimensions are usually denormalised because they often contain descriptive and rollup/hierarchical data repeated. Snow flake off a dimension will normalize the data.

  See you soon
  If

• If I don't get creative cloud, how will limit the use of photoshop touch?

  If I don't get creative cloud, how will limit the use of photoshop touch?

  I don't think it will limit your work with PS Touch, but could enahnce it a little.

  Just try to free membership of 2 GB and find out:

  https://creative.Adobe.com/plans

  Thank you!