BCC in Eloqua commit?

Similar Questions

• Eloqua commit - 'Reports' list of emails sent recently-

  In Eloqua Engage, is there a way to delete some have recently sent emails from the tab "reports"? In this way, if someone wants to remove test emails or obsolete emails from the list, they can do. Finally, new e-mails will take the statement and those who will be at the bottom but is more for cleaning purposes.

  Thank you!
  Ed

  Yes.  If you go to Insight - Email Email - Email Metrics - sales reports you will see a sales model using email report and some other reports that I'll allow you to go down the overall activity is committed.  I hope this helps!

• I have a list in Word of e-mail addresses. How can I get in the field bcc of email

  I want to write an email to 50 recipients. I have a list of e-mail addresses in Word. I can separate them by points or commas etc. How can I get them, en masse, in my email as BCC addresses. I agree not to go in my address book. This is an email at once.

  Sally

  Point 1. Addresses go into your address book. There is no where else to put them. Don't want thenm in your personal address book. Add another.

  Point 2. You need to format addresses to a CSV file and save them in word as such. Excel or any spreadsheet will do a better job of that than Word.

  Point 3. The CSV file must be safed UTF-8 text. Excel, I know that is not an additional step to open the file in Notepad and select explicitly UFT-8 in the dialogue being required to Excel.

  Point 4. The CSV file should be im in the Thunderbird AddressBook using the import menu item.

  Point 5 you must align the headers in the CSV file explicitly with the Thunderbird ones uses, otherwise the address that you import will not be in the e-mail address field.

  You can also create a single line with the addresses of electronic mail in Word. Separated by a comma and the copy and place your cursor in the BCC field use the hotkey Ctrl + V to paste them into the message header. Note that this is not technically supported and if you're wrong spaces and commas by things like Returns or tabs all you will get is an email that does not send.

• Under account settings > account > Copies and folders > Bcc these email addresses, which is the separator between multiple addresses?

  Under account settings > account > Copies and folders > Bcc these email addresses, which is the separator between multiple addresses? Using a space between addresses gives an error message.

  THX, Jon

  Try a comma.

  He did this in the BCC or CC BOX when it's empty, but is not too useful when you already have something there.

• Eloqua multilingual user interface

  Hi all

  We have a lot of users and clients connecting in EMEA and APAC countries, where English is not the first language.

  According to me, one of the priorities for Oracle with Eloqua may make available multilingual user interface. This could be just wishful thinking on my part it would be a PRECIOUS help. I am particularly interested in the Japan because it is where my team.

  Someone has information (or even a guess) on Eloqua UI being developed in several languages?  Estimated time?

  Thank you!

  Geoff Day

  Verticurl Pte Ltd

  Hi Geoff,

  It's actually one of our top priorities at the moment and we have a dedicated team working on it.  One of the huge benefits of the Oracle acquisition of are that they have this down to a science, and there is a very large Department and the 'translation' machine dedicated to this purpose.  Are some primary steps in making this real.

  -First of all, the user interface of the platform should be built in such a way that labels or text can be programmatically extracted and replaced.  New Eloqua screens built in the style of HTML5 had this integrated review there are only a few tweaks to do there.  Some of the screens that have been longer require more effort to make this possible, but we know what we need to do.  The platform must also be able to capture, store and display international characters, Eloqua has been able to do for a long time, we are there.

  -Secondly, there is a solid approach to the identification of 'culture' (country + language) of the user wishes to use and carry through their session.  We use the term culture because it is not only dependent on the language or dependent countries.  A simple example of this would be British for numbers, dates, and currencies style even if the language is English.  We have this understood as well

  -Finally, we need the real user interface translation to do - and it is where Oracle really helps to join us.  They have a team of translators from around the world who will make this part for us, with the participation as required according to the specific terms the business context.

  The big question is more clearly when and what languages.  That I can not commit at this stage that we're still relatively early in the project, but the general feeling is that one should be able to complete the work required in steps 1 & 2 and get some initial language translations "tier 1" made at the start of next year.  Once again, it is what we are organizing a view of road map, but please do not take it as a commitment as a variety of internal or external factors may change the "timing".

• Is it possible to add a BCC to an email?

  A set of our e-mails, we would like to have a copy (preferably bcc) of each post it out, so that we can see exactly which clients received from us.

  i.e. If send us an email to a segment of 100 contacts, then we would receive 100 copies of this email to one of our own mailboxes, so that we can see the exact version that the Subscriber has received - the same customization etc.

  Everyone realizes this?

  Thank you

  NB - I'm not a seedlist talking.

  Yes.  With Eloqua Platinum B & D we can auto BCC every email in one Inbox such [email protected] for reasons of archiving and compliance.  Our financial services, management and insurance for it companies.

  Talk to your account manager for prices and more information about this upgrade.  You will also receive several DKIM areas, additional assistance from our team of email delivery, and other tests from way back by months.

  Cheers, Aaron.

• Comma in the subject line after the merger of field

  I'm trying to create a fusion of our contact, followed a first name field comma and space, then the subject line.

  The kicker is, I don't want the comma (and space) will appear if we do not have a name associated with the e-mail address...  How can I do this?

  Here's what I have so far...

  < eloqua type = "emailfield" syntax = "FirstName" > name < / eloqua > line object here...

  I would like the result of the following:

  w/name:  Rob, line topic here...

  no name: Line of subject here...

  I tried to insert a comma and a space in various locations in the merge field code with no luck.

  Any help is appreciated.

  See you soon

  Hi, Rob. Nice name. Recently, I asked a similar question in this thread. Maybe some useful information for you.

• Deployment of BCC stuck

  Hello world

  A project that was created got stuck in step "approve the deployment project to the target of the staging. I went to/atg/epub/messaging/PublishingMessageSource of the instance of the BCC in dyn/admin to send the message of failure of staging manually to get the project is once again, but when I click on the 'send deployment Message complete', I get the following error:

  Error 500: javax.ejb.EJBException: QUERY_EXCEPTION_MESSAGE: POOR query: id =? 0, Args:? 0 = prc143012; nested exception is: CONTAINER: atg.repository.RepositorySecurityException; Source: ATG. Security.PermissionDeniedException: You do not have read access to the point of the process descriptor.

  I already gave my dyn/admin user all roles defined in the SecurePublishingRepository, which is what I needed to access the start page, but it seems to 'lose' the rights I am trying to send the message to the cause of error to display.

  Does anyone know how to fix this?

  I'm on ATG 10.2.

  Thanks in advance!

  Joe

  I was able to fix this with the instructions found here: ATG: how to fix projects in an unknown state in BCC/CA?

  I was able to get the project in the State of the author as follows:

  -remove the locks on the project. If any

  delete from avm_asset_lock where workspace_id =

  (select id of avm_devline, whose name =

  (select Workspace from epub_project where project = 'prj49001')) ;

  -change of State. For false and true editable control lock

  -locked to 0 and can be changed to 1

  Update epub_project

  the locked value = 0

  where project = "prj49001";

  Update epub_project

  editable value = 1

  where project = "prj49001";

  -change of State. For false and true editable control lock

  -locked to 0 and can be changed to 1

  Update avm_workspace

  the locked value = 0

  where ws_id =

  (select id of avm_devline, whose name =

  (select Workspace from epub_project where project = 'prj49001')) ;

  Update avm_workspace

  editable value = 1

  where ws_id =

  (select id of avm_devline, whose name =

  (select Workspace from epub_project where project = 'prj49001')) ;

  -Finally change author who is 3 for all workflows

  Update epub_ind_workflow

  set status = 3

  where ID_processus =

  (select ID_processus from epub_process where of the project = "prj49001");

  commit;

  Below invalidate caches of repository

  / atg/epub/PublishingRepository /.

  / atg/epub/version/VersionManagerRepository /.

• On bcc error

  I create a project in the BCC field, I do nothing, so I delete this project in the Acc (publishing). And I'm a complete deployment.but of the project's exist in Bcc, but I can't found the CCA, I want to delete this project in the Bcc.but, I click on this project, and hava a mistake "a page fault or the feature has occurred, please check your log of errors for more information". then I read the error log, it is a nullpointExection.

  Excerpt from the link above.

  -Remove the locks on the project if necessary
  delete from avm_asset_lock where workspace_id in
  (select avm_devline id, whose name in)
  (select Workspace from epub_project where project = 'prj243002'))

  -remove the history of the project
  delete from EPUB_PR_HISTORY where project in
  (select project in epub_project where project = "prj243002");

  -remove the project
  delete from epub_project where project = "prj243002";

  -remove the history of the process
  delete from EPUB_PROC_HISTORY where ID_processus in
  (select ID_processus from epub_process where of the project = "prj49001");

  -remove the tasks of process information
  delete from EPUB_PROC_TASKINFO where id in
  (select ID_processus from epub_process where of the project = "prj49001");

  -remove the States of the project (if any)
  delete from EPUB_IND_WORKFLOW where ID_processus in
  (select ID_processus from epub_process where of the project = "prj49001");

  -Remove the process
  delete from epub_process where where the scheme = "prj49001";

  commit;

  See you soon
  R

• The BCC algorithm, call a Web Service

  Reaching out to experts XAI/AIA in this community.
  
  Scenario of
  At the BCC, we have a case that has a number of statutes. One of these statuses will generate an outgoing Message will start a business in an external system process. After sending the outgoing Message the case is waiting for an update of this external system telling that the case is completed. In the meantime, a user must be able to see the current state of the business process in the external system when we look at the case of the BCC.
  
  High level solution
  We found with the following solution. An algorithm of Type case information is plugged that calls a Service Web (WS) that returns the current state of the business process in the external system. Send us an upside case Id and description returned by the WS is returned by the algorithm as a string of case information.
  
  Questions
  When you read the WOOF whitepapers on integration, XAI and SOA I identified two possible implementations of the solution:
  
  _1. Invoke the WS of Java Algorithm_
  Directives integration WOOF (doc Id 789060.1 on My Oracle Support)-page 40: this article describes a case study in which a WS is called from a the BCC algorithm, which is exactly what I want to achieve. Assume the WS, I like to call is provided in a similar way in BCC exposes XAI Inbound Services through WSDL (http:// < host >: < port > / < Server > / XAIApp/xaiserver/< service >?) WSDL). So I have a URL that points me to the WSDL of the WS, but this URL is different by the environment (development, test, production). Now, I have the following question:
  White paper provides that the WSDL is used to generate the Java stub code. The diagram on page 41 shows the Java code is deployed from the SDK and from that moment the program Java communicates directly with the WS and no longer has need of the WSDL. How will the program now on what host, port and the server resides on the other side? The URL of the WSDL is a parameter of the algorithm, or are parameters of the port/host/server can program Java, somehow fix this runtime by reading a file of environment properties?
  
  _2. Outgoing Message_
  Integration SOA WOOF (doc Id 1308161.1 on My Oracle Support)-page 16: BCC generates an outgoing Message and the Oracle SOA Suite uses a database adapter to query the outgoing Message to forward to messages of a certain type. If it detects such a message it will invoke the WS and update the entry of outgoing with WS response Message. Is this a realistic alternative for an interface in real time?
  * I think that CCB should validate the creation of the outgoing Message to the database before the Oracle SOA Suite is able detect the new pending the entry. Fix?
  * If I need to commit to the database, I guess I have to keep vote entry of the outgoing Message to detect if the WS updates the response XML field. Any other suggestions for this?

  When we send xml files, we use variable WLHOST to the location of the file. You can add a variable in the XAIParameterInfo.xml file, and then refer to the sender of XAI. This would result in the variable defined in one place. If you want to set this variable, you could look at the creation of a $SPLEBASE/scripts/cmenv.sh script so that when environment starts the script will automatically run a make you that the variable in the XAIParameterInfo.xml is set to the correct value, then the destination of the xai sender.

• Mail address BCC showing all recipients emails

  When sending emails from Bcc, if I don't have an email address in the field address IAB isn't blind coppied to recipients.  I don't seem to have this problem before El captain.  Mail works correctly?

  Some ISPS will show BCC when there is no beneficiary 'To '. I saw not listed as a requirement before but the Mail can also that now require as a security measure to prevent the used to spam e-mail users. Always add yourself as a recipient "to".

• Can I use search or search to locate a comma or in quotes in a text

  I was wanting to use formulas to locate commas etc in text strings. I am new to mac and numbers and I can't find the right way to enter the channel search by searching for commas or quotes. Always get the message in invalid format.

  Is to FIND, like this:

  

  = FIND (",", A2)

  This shows that the comma is the 12th character in the string.

  This assumes that you are using. No, in your region as the decimal separator.

  If you use as the decimal separator so I think that the formula would be:

  = FIND(",";) A2)

  SG

• How can I copy the list of names of files in the finder and set the Clipboard filenames separated by commas?

  Hi guys, I was wonder if anyone can give me a hand with a script.

  I need to be able to paste a list of file names of the files as follows:

  0001.jpg 0002.jpg 0003.jpg 0004.jpg

  At the moment, if I select the files in the Finder, copy to the Clipboard and paste them in TextEdit, they are like this:

  0001.jpg

  0002.jpg

  0003.jpg

  0004.jpg

  I found a similar but slightly different script and I don't know how to change it. Here it is:

  Define extension_list to {"jpg", "" JPG","jpeg","JPEG"}

  the value cbNames (Clipboard text) paragraphs

  Set csvNames to {}

  the tid value delimiters to point to the text of the AppleScript

  the text value of the AppleScript point delimiters ".»

  -now, make a list of names without extensions

  Repeat with the names in cbNames

  If the point 2 of the text names is extension_list then

  copy of text 1 of names at the end of csvNames

  end if

  end repeat

  Journal csvNames

  -now the filenames as comma CONCATENATE string separated

  the text value of the point delimiters AppleScript «»

  csvNames value cross-as text

  the text value of the point AppleScript delimiters tid

  There is an easier way. Open a TextEdit document and paste the list in. Place the cursor at the end of the first item and drag it to the start of the second.

  

  Press on + command + c to copy and then command + f to bring up find it. Press command + v (do not click in the first search field). Check the 'Replace' box, click in the field replace, and then type a comma and a space.

  

  Click 'All' and then 'done '.

  

• Where are my missing Bccs after I click send

  I created an email that included in the body that I had received another email. My list of recipients was all BCC. I clicked on send. One of the CCO was rejected due to problems. No messages were received for the remaining BCC. I looked in the "sent" folder. None of the BCC were there. What happened to my BCC? Where should I expect to find?

  Stem

  For me to believe is not enough to let you know. -rodalsa

  No. I use Thunderbird.

  Following on from my post, I discovered that my email was not sent through Thunderbird. In fact, he always resided in my drafts folder in my revised State who has been with the BCC all rid of recipients except one who had not. I changed the address failed to which I hope might work, but had not yet sent. I had deleted all the ones I thought were already sent - prior to my having looked in the box feel - my bad.

  The piece of knowledge that I missed was that; Thunderbird sends all messages to the recipients if there is an error with one of them. After that ignorance, I did things that contributed to my post (I have to re - introduce a large number of addresses as BCC).

  rodalsa

• How to change a group of "to of" to "cc" or "BCC"?

  I get emails where there is many-to-many 'CC' and I want to answer all of them, but I don't want to do because I respond to each of them... so I need to use "bcc" - is it possible to change all the 'CC' to 'bcc' without going through all 20 or 30 "to of" and change them manually?

  Try this add-on: https://addons.mozilla.org/en-US/thunderbird/addon/use-bcc-instead/