Best practices for client internal connectivity with Horizon view 6

Similar Questions

• Best practices for vCenter 5.1 with Microsoft SQL Server 2008 R2

  I am looking for a best practices or really any documentation on configuring vCenter 5.1 with a SQL Server 2008 R2 database. I see that SQL Server 2008 R2 is supported, but that's all. Any help is appreciated.

  Unless you have a huge (and I mean huge) environment, the vCenter database in general is not that big of a deal or go-getter and was apparently not deemed worthy for some secret magic tips because of this.

  Standard SQL "best practices" and observe the standard installation documentation when deployment vCenter and you should be good to go.

  Some documents on the vCenter more in-depth database are here:

  http://www.VMware.com/resources/TechResources/10162

  http://www.VMware.com/resources/TechResources/10302

  Also, I highly recommend you watch this recording of VMworld:

  http://www.YouTube.com/watch?v=5Ly64_ca7-I

• Best practices for the secure connection of the web/app site

  Hello, all,.

  I'm nearing the end of my project and could use some advice on creating a connection to it.

  First, I really want to avoid using the CFLOGIN/CFLOGINUSER, if possible.  I know that a lot of people use it and everything, but after some things I read online, I'm not comfortable with it.  I would like to create one from scratch.  I googled for it, but I'm not finding anything that does not use CFLOGIN.

  That said, another thing that concerns me now is a connected administrator beyond what can make any session scope.  No matter how long I programmatically set the session, I believe that it may not exceed what is defined in CFAdmin.  So if I put manually the session expires in an hour, but the CFAdmin said 20 minutes, the session will not last more than 20 minutes.  :/

  One last thing.  (I have little desire to Columbo, now) simultaneous connections.  I want to ban them and set it so that when an admin is connected to already, only a second connection without a disconnection, first, to deny the second attempt to logon.  Is it difficult to organize?

  I have included the class for BCrypt in my admin section and plans using them to encrypt passwords before their insertion in the database.  Yes or no?

  V/r,

  ^_^

  UPDATE: ALSO - how is it hard to put it so I can see who is connected and 'boot' any who (assuming I think that their account has been compromised)?

  WolfShade wrote:

  So, how do _you_ track the status of the connection? I have never created a connection; When I currently have a job, the network manages the authentication/authorization via common access cards.

  I create a login page, authenticate the user, and if valid, I create a user bean (I use FW/1 and he loves beans and once you get the hang of them they are flexible and powerful) and store this in the session bean. The bean understands everything right the user could have (admin, user, Editor, etc.). So somewhere in the application startup process I check the rights necessary to the requested page or action and validate it against the user bean (or bean user exist even in the case of a user not connected). To disconnect, simply remove the user from the session bean.

  You can search a little more on how to apply the rights and roles to a site and a user. I founded the framework that I use on an article for box fuses and describes rights such as locks and key - locks applied to the site and keys given to users. Once you have a basic framework that the rest is easier than you may think right now.

• Best practices for the replication SAN with SRM

  We have a 20 MB MPLS pipe between our HQ and DR sites. Is this enough for replication? What are the advantages\disadvantages to use a VPN tunnel to the SAN replication over the internet?

  Unfortunately, it is really dependent on your replication technology of storage, replication, or modes, the data change and RPO rate if asynchronous replication.  I saw the replication occur on a 10 MB line very well even if the technology used has bandwidth capabilities very high compression.  What do you use?  Could someone here more to add experience with replication tool.

• Best practices for network configuration of vSphere with two subnets?

  Well, then I'll set up 3 ESXi hosts connected to storage shared with two different subnets. I configured the iSCSI initiator and the iSCSI with his own default gateway - 192.168.1.1 - targets through a Cisco router and did the same with the hosts configured with its own default gateway - 192.168.2.2. I don't know if I should have a router in the middle to route traffic between two subnets since I use iSCSI ports linking and grouping of NETWORK cards. If I shouldn't use a physical router, how do I route the traffic between different subnets and use iSCSI ports binding at the same time. What are the best practices for the implementation of a network with two subnets vSphere (ESX host network: iSCSI network)? Thank you in advance.

  Install the most common iSCSI would be traffic between hosts and

  the storage is not being routed, because a router it could reduce performance.

  If you have VLAN 10(192.168.1.0/24) iSCSI, VLAN 20 (192.168.2.0/24) ESX

  MGMT and VLAN 30 (192.168.3.0/24) comments VMs and VLAN 40 (192.168.4.0/24)

  vMotion a deployment scenario might be something like:

  NIC1 - vSwitch 0 - active VMK (192.168.1.10) MGMT, vMotion VMK (192.168.4.10)

  standby

  NIC2 - vSwitch 1 - current (VLAN30) guest virtual machine port group

  NIC3 - vSwitch 2 - active VMK1 (192.168.1.10) iSCSI

  NIC4 - vSwitch 2 - active VMK2 (192.168.1.11) iSCSI

  NIC5 - vSwitch 1 - current (VLAN30) guest virtual machine port group

  NIC6 - vSwitch 0 - MGMT VMK (192.168.2.10) standby, vMotion

  VMK (192.168.4.10) active

  You would place you on VLAN 10 storage with an IP address of something like target

  192.168.1.8 and iSCSI traffic would remain on this VLAN. The default value

  gateway configured in ESXi would be the router the VLAN 20 with an ip address of

  something like 192.168.2.1. I hope that scenario help set some options.

  Tuesday, June 24, 2014 19:16, vctl [email protected]>

• Best practices for dealing with Exceptions on members of storage

  We recently encountered a problem where one of our DistributedCaches was closing himself and restart due to a RuntimeException is thrown from our code (see below). As usual, it's our own code and we have updated to not throw a RuntimeException in all circumstances.
  
  I would like to know if there are some best practices for Exception handling, other than catching Exceptions and their record. We should always catch the Exceptions and ensure that they do not spread back to code that is running from the pot of consistency? Is it possible to configure consistency so that our DistributedCaches are not completed even when filters custom and other throw RuntimeExceptions?
  
  
  Thank you, Aidan
  
  
  Exception below:
  
  2010-02-09 12:40:39.222/88477.977 Oracle coherence GE < error > 3.4.2/411 (thread = DistributedCache:StyleCache, Member = 48): a (java.lang.RuntimeException) exception occurred reading Message AggregateFilterRequest Type = 31 for Service = DistributedCache {Name = StyleCache, State = (SERVICE_STARTED), LocalStorage = active, PartitionCount = 1021, BackupCount = 1, AssignedPartitions = 201, 204 = BackupPartitions}
  2010-02-09 12:40:39.222/88477.977 Oracle coherence GE < error > 3.4.2/411 (thread = DistributedCache:StyleCache, Member = 48): DistributedCache ending because of an exception not handled: java.lang.RuntimeException

  We have reproduced you problem in the House and it looks like a global filtering does not
  the correct thing (i.e. having caught a processed) when moving from a runtime exception.
  In general runtime exceptions should simply be exploited and returned to the application
  without compromising the cache server, so we will be solving it.

• I would like to know the "best practices" for unplugging my computer permanently to the internet and other updates.

  Thank you for taking the time to read this. I would like to know the "best practices" for unplugging my computer permanently to the internet and other updates. I thought I would do a clean install of Windows XP, install my Microsoft Works again and nothing else. I would like to effectively transforming my computer into a word processor. He continues more and more slow. I get blue screen errors, once again. I received excellent Microsoft Support when it happened before, but since my computer is around 13 years, I think it is not worth the headache to try to remedy. I ran the Windows 7 Upgrade Advisor, and my computer would not be able to upgrade. Please, can someone tell me how to make it only a word processor without updates or internet connection? (I already have a new computer with Microsoft Windows 7 Home Premium, it's the computer that I use. The old computer is just sitting there and once a week or so I updates.) I appreciate your time, thank you!

  original title: old computer unstable

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/install-Windows-XP

  http://www.WindowsXPHome.WindowsReinstall.com/sp2installxpcdoldhdd/indexfullpage.htm

  http://aumha.NET/viewtopic.php?f=62&t=44636

  Clean install XP sites
  You can choose which site to reinstall XP.

  Once it is installed, then you do not have to connect what anyone, however, some updates may be required to perform the work, test this by installing work and see if you get an error msg. Except that you should be fine.

• Best practices for the integration of the Master Data Management (MDM)

  I work on the integration of MDM with Eloqua and are looking for the best approach to sync data lead/Contact changes of Eloqua in our internal MDM Hub (output only). Ideally, we would like that integration practically in real time but my findings to date suggest that there is no option. Any integration will result in a kind of calendar.

  Here are the options that we had:

  1. "Exotic" CRM integration: using internal events to capture and queue in the queue changes internal (QIP) and allows access to the queue from outside Eloqua SOAP/REST API
  2. Data export: set up a Data Export that is "expected" to run on request and exteernally annex survey via the API SOAP/REST/in bulk
  3. API in bulk: changes in voting that has happened since the previous survey through the API in bulk from Eloqua outside (not sure how this is different from the previous option)

  Two other options which may not work at all and who are potentially antimodel:

  • Cloud connector: create a campaign questioning changes to schedule and configure a connector of cloud (if possible at all) to notify MDM endpoint to query contact/lead "record" of Eloqua.
  • "Native" integration CRM (crazy): fake of a native CRM endpoint (for example, Salesforce) and use internal events and external calls to Eloqua push data into our MDM

  Issues related to the:

  1. What is the best practice for this integration?
  2. Give us an option that would give us the close integration in real-time (technically asynchronous but always / event-based reminder)? (something like the outgoing in Salesforce e-mail)
  3. What limits should consider these options? (for example API daily call, size response SOAP/REST)

  If you can, I would try to talk to Informatica...

  To imitate the integrations of native type, you use the QIP and control what activities it validated by internal events as you would with a native integration.

  You will also use the cloud api connector to allow you to set up an integration CRM (or MDM) program.

  You have fields of identification is added objects contact and account in Eloqua for their respective IDs in the MDM system and keep track of the last update of MDM with a date field.

  A task scheduled outside of Eloqua would go to a certain interval and extract the QAP changes send to MDM and pull the contacts waiting to be sent in place of the cloud connector.

  It isn't really much of anything as outgoing unfortunately use Messaging.  You can send form data shall immediately submit data to Server (it would be a bit like from collections of rule of integration running of the steps in processing of forms).

  See you soon,.

  Ben

• Best practices for a NFS data store

  I need to create a data store on a NAS and connect to some servers ESXi 5.0 as a NFS datastore.

  It will be used to host virtual machines less used.

  What are the best practices to create and connect a datastore NFS or networking and storage view bridges in order to get the best possible performance and decrease is not the overall performance of the network?

  Concerning

  Marius

  Create a new subnet of layer 2 for your NFS data warehouses and set it up on his own vSwitch with two uplinks in an active configuration / eve of reunification. Uplink should be variously patches in two distinct physical switches and the subnet must have the disabled bridge so that NFS traffic is not routable in other parts of your network. NFS export can be restricted to the IP address of storage host IP (address of the VM kernel port you created for NFS in the first step), or any address on that subnet. This configuration isolates traffic NFS for performance, ensures the security and redundancy. You should also consult your whitepapers of storage vendors for any specific recommendation of the seller.

  Data warehouses can be made available for the guests you wish and you can use Iometer to compare PAHO are / s and flow rate to see if it meets your expectations and requirements.

• Best practices for tags

  Hello
  
  In the bundled applications Tags are used in most applications. For example. in App Customer Tracker, we can add tags to a customer where these tags are stored in a varchr2 column in the Customers Table.
  In my case, I've pre-defined tags real estate (Real Estate) in a table of research called TAGS. For example, Full floor, furnished, equipped, duplexes, attached... What is the best practice for tag properties:
  1 - to store these tags in a varchar column in the table of PROPERTIES using the Shuttle box.
  OR
  2. to store in a third table Eg, PROPERTIES_TAGS (ID PK, FK property-ID, TAG_ID FK), then use the LISTAGG function to show tags in one line in the report properties.
  OR
  You have a better option?
  
  Kind regards
  Fateh

  Fateh says:
  Hello

  In the bundled applications Tags are used in most applications. For example. in App Customer Tracker, we can add tags to a customer where these tags are stored in a varchr2 column in the Customers Table.
  In my case, I've pre-defined tags real estate (Real Estate) in a table of research called TAGS. For example, Full floor, furnished, equipped, duplexes, attached...

  These seem to be two different use cases. In the bundled applications tags allow end users to join free-form metadata to the data for their own needs (they are sometimes called "folk taxonomies"). Users can use tags for different purposes or different tags for the same purpose. For example, I could add 'Wednesday', 'Thursday' or 'Friday' tags customers because these are the days that they receive their deliveries. For the same purpose, you could mark the same customers '1', '8' and '15' by the numbers of road trucks making deliveries. You can use 'Monday' to indicate that the client is closed on Mondays...

  In your application you assign to the known properties of predefined attributes. It is a model of standard attribute 1:M. their view using the metaphor of the label is not equivalent to the user of free-form tags.

  What is the best practice for tag properties:
  1 - to store these tags in a varchar column in the table of PROPERTIES using the Shuttle box.

  If you do this, how can you:

• Search for furnished duplex properties effectively?
  
• Change in the world "mounted" to "integrated"?
  
• Ratio of the number of properties, broken down by full floor, double-sided, equipped...

  OR
  2. to store in a third table Eg, PROPERTIES_TAGS (ID PK, FK property-ID, TAG_ID FK), then use the LISTAGG function to show tags in one line in the report properties.

  As Why use Look up Table, shows the correct way to proceed. It allows the data to be indexed for efficient extraction, and issues such as those above should be dealt with simply by using joins and grouping.

  You might want to examine the possibility of eliminating the PK ID and use an index table organized for this.

  OR
  You have a better option?

  I'd also look carefully your data model. Make sure that you're not flirting with the anti-pattern VAE. Some/all of these values are not simply the attributes on the property?

• Best practices for managing strategies of path

  Hello

  I get conflicting advice on best practices for managed paths.

  We are on version 4.0 of ESXi connection to a HP EVA8000. Best practices guide HP recommends setting the strategy of railways handle on Round Robin.

  This seems to give two active paths to the optimized controller. See: http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA1-2185ENW.pdf

  We used certain consultants and they say that the best practices of Vmware for this solution is to use the MRU policy which translates a single path to the optimized controller.

  So, any idea what good practice is best practice? Does make a difference?

  TIA

  Rob.

  Always go with the recommendation of the storage provider.  VMware recommendation is based on the characteristics of the generic array (controller, capable ALUA failover methods, etc.).  The storage provider's recommendation is based on their performance and compatibility testing.  You may want to review their recommendations carefully, however, to ensure that each point is what you want.

  With the 8000, I ran with Round-Robin.  This is the option of creating more robust paths available to you from a failover and performance point of view and can provide performance more even through the ports on the storage controller.

  While I did of the specific tests/validation, the last time that I looked at the docs, the configuration of HP recommends that you configure each IO to the ports in the switch configuration.  This adds the charge to the ESX host, the switch to other ports, but HP claims that their tests showed that it is the optimal configuration.  It was the only parameter I wondered in their recommendation.

  If you haven't done so already, be sure to download the HP doc on configuring ESX and EVA bays.  There are several parameters that you must configure the policy path, as well as a few scripts to help make the changes.

  Virtualization of happy!

  JP

  Please consider awarding points to useful or appropriate responses.

• AF best practices for video

  I'm using an EOS 7 d for 1080 p HD video shooting. New to SLR camera and digital video. I have watched several tutorials but do not yet have a good understanding of what the best practices for the development.

  If I put the camera in AI Servo it will auto focus if the subject is moving away or toward me with depress me back AF-ON or the shutter button? Or should I press one of these buttons to make the camera continues to focus?

  You know tutorials or video lessons that cross using update with the video?

  Thanks in advance!

  I don't know any tutorials, but more serious videographers say it is best to use only the manual focus.

  Trial and error is a good teacher, when it comes to video DSLR. You'll quickly learn that video Auto Focus is really bad with the 7 d and most of the people do not use it all together.

  The method that works for me is to use AF before the filming of the video and then adjust manually if you want to you to shoot the video. With the help of f/8 or f/11 to keep everything in short without having to keep the setting.

  More recent Canon DSLR's like the T4i, T5i, 70 d and SL1 have a "hybrid AF" that does a much better job of AF during video, but it is not yet as good as a camcorder

• HP stream 11-d008tu: best practices for migrating to Windows 10?

  Hey there, I have a HP flow 11-d0008tu and received the notification I can upgrade to Windows 10. I want to do a clean install with a downloaded ISO but knowledge first of all, it is better to upgrade so that you get the activation done.

  Can someone give me some ideas on best practices for the upgrade? The stream has only 30GB HD so I have no recovery disk, I'll just do a recovery later on USB or SD card. When I do the upgrade can deselect recovery option or delete?

  Also, any other suggestions appreciated, especially which helps make effective for small HD

  See you soon

  Hi, I posted an installation procedure for Windows 10 fresh for the Tablet HP Stream here.  Also, I have a laptop 11 flow but do not have that yet. I think it must be the same because they both the same drive of mem 32 GB Hynix. A change would you probably want to use the 64-bit instead of 32-bit Windows 10 ISO file, the Tablet has only 1 GB of RAM.

• Just improved m tips on best practices for sharing files on a Server 2008 std.

  The field contains about 15 machines with two domain controllers, one's data is the app files / print etc...  I just upgraded from 2003 to 2008 and want to get advice on best practices for the establishment of a group of file sharing. Basically I want each user to have their their own records, but also a staff; folder. Since I am usually accustomed to using windows Explorer, I would like to know if these actions can be done in the best conditions. Also I noticed on 2008 there is a feature of contacts. How can it be used? I would like to message or send an email to users their file locations. Also, I want to implement an admin at a lower level to handle the actions without making them far in on the server, not sure.

  I read a certain bbut I don't like test direct more because it can cause problems. So basically a way short and neat to manage shares using the MMC, as well as the way that I approach their mail from the server of their actions. Maybe what kind of access cintrol or permissions are suitable also for documents. Also how can I have them use office templates without changing the format of the model.

  THX

  g

  Hello 996vtwin,

  Thank you for visiting the Microsoft Answers site. The question you have posted is related to Windows Server and would be better suited to the Windows Server TechNet community. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Hope this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Best practices for vsphere 5.1

  where can I find the doc more up-to-date about berries EQL configuration / best practices with vmware vsphere 5.1

  Hello

  Here is a link to a PDF file that covers best practices for ESXi and EQL.

  Best EqualLogic practices ESX

  en.Community.Dell.com/.../20434601.aspx

  This doc mentions specifically that the storage Heartbeat VMKernel port is no longer necessary with ESXi v5.1.  VMware has corrected the problem that made it necessary.

  If you add it to a 5.1 system it will not hurt.  It will take an IP address for each node.

  If you upgrade 5.0 to 5.1, you can delete it later.

  Here is a link to VMware which addresses this issue and has links to other Dell documents which confirm also that it is fixed in 5.1.

  KB.VMware.com/.../Search.do

  Kind regards