Best way to make the simulation software

Similar Questions

• What is the best way to make the completely white background for the pictures of the products?

  What is the best way to make the completely white background for the pictures of the products?  I just need to show a product on a completely white background.

  Shoot on properly informed white background is easy. Then be tot apply an adjustment layer to whiten the BG, then apply a mask for the domains you want to not so bright.

• What is the best way to make the uniform skin (not necessarily blur it!)

  Hello

  I have some photos where the skin of the leg of the model is not uniform brighteness. Without this vagueness, I tried the clone stamp, but it is very difficult not to introduce new variations of brightness.

  What is the best way to make the uniform skin of brightness (in fact, the same color!)?

  Thank you

  Juan dent

  I know EXACTLY what you mean.  I was doing something exactly on these lines just yesterday.

  It is not trivial, but it is doable.

  For 'hard points', you can try the Spot Healing Brush first.

  But here is a tip that I use sometimes which may well increase overall finesse:

  1. select just the surface of the skin.

  2. selection a little market and soften the edge, just to make sure that you don't mess the edges.

  3. median filter - noise - and set the RADIUS to be big enough.  Look at the image to see the level of smoothing.

  4. change - bland and knock back effect, while it is not perfect, but makes a subtle improvement.

  

  

  

  Then, for clearing-up soft darkening, try the burn and Dodge tools, at a low level of exposure (and possibly with Airbrush Mode).  Work slow.

  Cloning with low opacity can sometimes help as well.

  -Christmas

• best way to make the guests timeout?

  I use MX 2004, and I need timeout voiceover guests. What is the best way to accomplish the timing? I used onEnterFrame countdown timers, but, but I had mixed - they do not have to be too precise, just working with a few predictabillity. I also fear that using onEnterFrame can slow things down too.
  
  I tried to use setInterval directly and have the time range to clear himself, but it didn't. I also tried setTimeout function of Senocular who uses setInterval, but it works only once, same kind of thing, I've tried in simpler form. I tried different things and now I'm all confuzzled - they sometimes work and sometimes not. I should probably start from zero (new), but times are looming and I can't think straight - I'm just a little thrasing autour - I also tried a 'status quo' loop, but then I get a "slow script" warning
  
  I think part of the problem is that I have a voice-over as guests and they are not finished at the time that the interval is disabled. I have them preloaded in a swf file and load the film like this.
  
  The tips are greatly appreciated, TIA!

  setInterval() always works and is fairly accurate, except if you need nearby 10 accuracy Ms (in which case you can fix setInterval to maintain the precise timing).

  any problem with your intervals of compensation is a problem coding and encoder.

• Have desktop PC, you want to buy a MacBook Pro.  Best way to have the Adobe software on both?  I have 4 products from Adobe installed on PC.

  Hello

  I have a young PC Desktop with PS CS6, LR 5, AI CS6 and PES 11 installed.  I'm going to teach photography classes and therefore need a laptop.  I want to buy a MacBook Pro.  What is the best way to get my Adobe on the Mac software?  I know I could use Boot Camp or turn it into a "virtual" Windows machine  These two deteriorating performance.  Is there a better way?

  Thank you

  Jennifer

  AFAIK, the versions in box elements (Photoshop and first) programs have two versions... If you purchased via download, only one version, so you will have to buy again to get the other version... and P.Elements 14 is now updated

  CS6 exchanging platform, but as much as I know you do not get to keep your old version

  The only current cross-platform license is for the cloud, which allows two activations, and maybe it's a on each platform

• What is the best way to make the window of the program to display in a secondary window?

  What I did to drag the window of the program on my secondary monitor.

  But when I did, I noticed that the window of program on my secondary monitor window is different in that all the icons/buttons (for example the timer/counter... etc) which will usually appear in the program window now are no longer there when the program window is in the secondary monitor.

  I was wondering what a bad way to run the program window to display on a secondary monitor?

  Can I find out the correct way to lead program window to display on a secondary monitor?

  Thank you

  If you use the emission of mercury, then only the video full screen, no button or the menu. If you not anchored and dragged the program for a second monitor monitor Panel, it should not change the buttons he had previously. You can alternate the slot and off the power of the key/tool icon > display the transport controls.

• Best way to make the physical NETWORK card-> vmnic number?

  Is there a known way to understand the link between the vmnic0, vmnic1... logical names and their relationship to physical network cards of ESX/ESXi? In other words, if you get on a new server with, say, 6 physical ports and a config on one vmnic, how do you know which translates to correct physics?

  The means that I can think of are:

  • Check the MAC address within vSphere Client, but then you must somehow know the MAC of the physical NETWORK adapter

  • check the number of PCI of vSphere Client, but this seems a bit difficult to understand?

  • fix pull cables and are looking for "plugged" or not.

  So, how do you do this, if necessary?

  In fact, it is quite easy to see which port on a teddy bear refers to things in the VMware environment...

  Look under configuring the host tab/Server/network element equipment adapters... This will show each NIC and what vmnic # are assigned to the ports. It will also show the MAC address of each port. If they are assigned to vSwitches, it will also show this info...

  

  You can also see the Networking section (still under the Configuration tab) to see the vmnic # assigned to each vSwitch...

  

  Multiport NIC generally have markings on the plate PCI to let you know which is which... All you really need to know is what is the beginning of numbering.

  VMware VCP4

  Review the allocation of points for "useful" or "right" answers.

• What is the best way to make a PDF file several Photoshop images, while maintaining editable layers?

  What is the best way to make a PDF file several Photoshop images, while retaining the layers in editable for later use mode? I tried to do in Acrobat, but it does not keep separate layers. I also tried to automate the PDF presentation in Photoshop, but it combines the layers as well. I need to enable layers from photoshop retain their ability to be edited.

  It is not possible at this time, Photoshop is not a page layout program and pdf is hardly a format suitable to hold several files psd layered or editable page layouts.

  Why would you do that anyway?

• I bought CS6 extended yesterday (yes I did). I have CS4 and many photos in bridge (keywords tag). What is the best way to make my photos in bridge cs4 cs6? Is there a guide how to go about so I do not lose one of my keywords/photos? WH

  I bought CS6 extended yesterday (yes I did). I have CS4 and many photos in bridge (keywords tag). What is the best way to make my photos in bridge cs4 cs6? Y at - it a guide how to: so I do not lose one of my keywords/photos? Who can help?

  Keywords travel with the file, so it shouldn't be a problem. Here's how export you key word of CS4 information and import it into CS6.

  How to import metadata and keywords Bridge to CS6 in CS4 so that I don't lose if CS4 is not

  I hope that your situation is not as complicated.

  Gene

• What is the best way to migrate your Adobe software on another computer?

  What is the best way to migrate your Adobe software on another computer?

  Install the software, does not migrate/transfer it.  If you need to download links for the software and see you not in your Adobe account online, just determine what applications or Suites is necessary and it might be possible to provide links.

• What is the best way to make a second copy of a series of photos on a hard drive after that I imported and made changes?

  What is the best way to replace the second copies of photos created during import with revised versions? Export, seems to be an option, but is there a method named? I use Lightroom CC/6

  I don't think you understand the concept of Lightroom. The settings are stored in the catalog. They are not applied to the images. The catalog is the key. If the images in the main location are damaged or lost, then you can copy the backup images at that location and any adjustments that have been made will be implemented. The main thing you want to be sure to do is have a backup of your catalog, as well as a backup of your images. You can export copies of your images as JPEG, PSD or TIF images, and these copies will have all the adjustments included.

• Best way to remove the clipping

  What is the best way to remove the clipping?  I tried

  restoration/effects/clip restoration (process) and...

  In some cases. It does not remove the distortion, even if the chart of the sound wave "seems good.  I just tried the presets.  Any suggestions?

  Thank you.

  Steve C2 wrote:

  In some cases. It does not remove the distortion, even if the chart of the sound wave "seems good.  I just tried the presets.  Any suggestions?

  Not really--and this is not really surprising that this does not work in all cases. in fact, it is quite surprising that it works at all, in many ways. Obviously, the worst of the peaks of the break less information will be missing, and when the break comes to the point where the distortion is audible, then lot of data reconstruction is not just there for the software to make assumptions about - no cure so that it is possible.

  Only one pic is not too difficult to reconstruct - you have the slope of the wave of hand and on the other, and all you have to do is find where are the points of y-intercept of the two tracks, and who will be actually rebuild - probably quite precisely. But at the time wherever your clipped signal effectively contains two or more peaks, especially if they are part of a long harmonic, then reconstruction can actually do the distortion that you will inevitably get worse. This is because the software only attempts to reconstruct the waveform of the tracks on part and on the other of the clip, (information) as well as harmonic any expected have been there becomes altered, virtually useful - where increased distortion.

• Best way to make my SSD works again with a single partition

  There are 2.5 years, I replaced the original on my computer with a SSD hard drive. Months after I installed the beta version of Yosemite, the latest operating system for Mac at the time. To do this, the system created a partition on my drive, in which he has installed the beta version of Yosemite.

  I have today on the same partition, I installed Yosemite, Sierra macOS running. In the other, I have all files, so I want to eliminate. However, when I try to do this by using the disk on my Mac utility, it is not possible; I get a message that says I can't delete the first volume of the disc. When I try to increase the size of the partition on which macOS Sierra operates, so reduced the size of the other, the system won't let me.

  I would like to know what is the best way to make my SSD works with only one partition.

  You cannot delete the last partition that was created, that not 1.

  You can clone the content from the 2nd to the 1st, then you can remove the 2nd.

• Need help: best way to exchange the Ipads?

  Dear all,

  Need help a genre:

  I use Ipad Air2 and my father is using retina Ipad Mini... I gifted him before 2 years...!

  We thought to share the Ipads because he loved the biggest... Can someone guide what is the best way to swap the parameters of the iPad?

  It is by taking backup and restore from Icloud? There will be data loss? or anything else that needs attention (something that he needed to be reconfigured)?

  Any help is very appreciated!

  Make a backup of each individual iPad. Use your own accounts: How to back up your device using iCloud or iTunes - Apple Support

  Import your photos from each iPad: import pictures and videos from your iPad, iPhone or iPod touch to your computer - Apple Support

  Then do it on every iPad: what to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

  Then restore the backup in your 'new' ipads: restore your device from an iCloud or iTunes backup - Apple Support

  If the ipads have the same size of storage with the same iOS version, it should work fine. -AJ

• best way to clear the cache on an iMac 2011 - el capitan

  best way to clear the cache on an iMac 2011 - el capitan

  The best way is not for everyone. Clear the caches unnecessarily makes your computer run more slowly while they are rebuilt. Did you have a specific problem that you thought that clearing cache can solve? If so, post on the real problem.