best way to remove Norton from my IMac

Similar Questions

• best way to transfer photos from the iMac on external hard drive

  best way to transfer photos from the iMac on external hard drive

  If you are mobile loose photo files, drag them in here and if you are going to be removed from the inside, keep a copy on a second disc.

  If you move an iPhoto, Aperture, or photo library, make sure that the external hard drive contains a volume to the Mac OS Extended format, drag the library there, launch the application with the key Option key, choose it, confirm that it works and if you are going to be remove from the inside, keep a copy of it on a second disc.

  (140309)

• Best way to remove millions of records

  
  Hi gurus

  Just for my goal of learning, which should be the best way to remove records from the entire table containing millions of records, I know about truncate command, but is there any other way around?

  Concerning

  Muzz

  Hello

  If you want to remove all the lines, then nothing can TRUNCATE TABLE for performance.  You cannot RESTORE a DML, as TRUNCATE TABLE operation, that's why it's so fast: he doesn't have to remember what has been deleted.  TRUNCATE TABLE will leave privileges, constraints, triggers, and intact the table storage parameters.

• Best way to remove viruses

  Hello what is the best way to remove a virus? I was wondering I use ESET.

  Stay calm that's easily solved

  First download malwarebytes.
  If you get redirection problems and you can't navigate it download it from this link
  http://download.CNET.com/Malwarebytes-anti-malware/3001-8022_4-10804572.html?SPI=5eaa10a5b0b94be96245e49b2d32c622

  After download, install, and run a FULL system scan. None of these quick scan stuff.

  Then follow the steps here to reset the internet settings for windows XP
  http://support.Microsoft.com/kb/923737

  These instructions are for Internet Explorer, you will need to look at the individual instructions for each browser.

  Personally, I would recommend using Avast and run an analysis of rookit after you did all the rest, but that's just me

• Best way to remove lines of 38million?

  Hello

  ENV: Oracle 11 g 2 (11.2.0.3.6) on the file system, Oracle Linux 6.2 64bits

  I was invited to remove redundant/old data from a table that has not been cleaned for long loooong.

  Select count (0) PI PROC_INST

  where there is not (select id

  of ids_to_keep rb

  where rb.id = pi. RAW_BUFFER_ID

  )

  and pi.instruction_type not in ('URL1', 'URL2')

  Returns the count = 38442973

  Delete it:

  remove IP PROC_INST

  where there is not (select id

  of ids_to_keep rb

  where rb.id = pi. RAW_BUFFER_ID

  )

  and pi.instruction_type not in ('URL1', 'URL2')

  
  

  I tried to delete like this, but it failed with "ORA-30036: unable to extend segment by 8 in the undo tablespace ' UNDOTBS.

  What is the best way to remove pieces and validation for each segment of deleted data?

  Best regards

  How many lines will remain in the table? Maybe create a new table using ETG and exchange the original after the operation table would be more efficient (if the table is not in permanent access).

• Have a rocket w / 8 gb 8 GB; What is the best way to remove the mp3s in double...

  I looked through some 50 pages and did not find the answer.

  I have a 8 GB Fuze w / additional removable 8 GB.  By mistake I put a few same songs on both discs.  What is the best way to remove these and if I do not remove them, she also ruin added playlists?

  Thank you

  Connect it to your computer, set up 2 separate workstation boxes, one to an intern to exteranal and scroll down... delete the dupes of one of the disks and problem solved

  Edit: I forgot you questions about playlists of pesky things I barely use. Those that you might have to re-do.

• What is the best way to transfer pictures from an old computer to a flash drive or a drive back then to a new computer?

  What is the best way to transfer pictures from an old computer to a flash drive or a drive back then to a new computer?

  The easiest and most reliable I've found is to make the direct drag-and-drop method.

  (1) on the old computer, open your Windows Explorer and go to your photos.

  (2) open another Windows Explorer window and access your 'Computer' folder and in your flash drive

  (3) drag the photos to the flash drive.

  (4) take the flash drive on the new computer and drag them into your images folder

• best way to import animation (from host CC) to the Premier Pro?

  best way to import animation (from host CC) to the Premier Pro?

  Export of Animate to a format of PP can work with.

• Best way to remove

  What is the best way to remove the COMPLETE domain name and just leave the short name

  FOR EXAMPLE:

  I have:

  Scooby.Doo.com

  I want to:

  Scooby

  This is where I wish I could integrate the good old unix for this commands.

  Thank you

  Hello, drivera01-

  If you talk about string manipulation, you can use the Split() method, such as:

  PS D:\> "scooby.doo.com".Split(".")[0]
  scooby
  

  It doubles up on the character (a period) and then accesses the first element of the resulting matrix.  Is - for what you are looking for?

• best way to remove all changes

  What is the best way to remove all changes that were made to an image in Camera Raw, to get the picture to the way it was originally?

  I'm surprised! I use Lightroom most of the time, and that's what the reset button. You can do this in bridge. Right-click on the image, then choose the development-> erase settings parameters. As an alternative, you can use your file system browser to delete the XMP files.

• Is there a way to remove data from a combination of individual Member?

  Hello
  
  Is there a way to remove data from a combination of members particlular, as if I want data for the month of sales for the month of May to remove and keep the rest how to do?
  
  Thank you.

  You don't mention if this is a cube ASO or BSO and which version you're on. If OSI, then a script to calc using a fix to erase the part of the data is what you want. There are references to him by the other prople. If it's an ASO cube, then you use a MaxL command with MDX syntax to make clear assuming you're on version 11.1.1.X or superior. If you are on a lower version, it becomes more complicated.

• Best way to remove the clipping

  What is the best way to remove the clipping?  I tried

  restoration/effects/clip restoration (process) and...

  In some cases. It does not remove the distortion, even if the chart of the sound wave "seems good.  I just tried the presets.  Any suggestions?

  Thank you.

  Steve C2 wrote:

  In some cases. It does not remove the distortion, even if the chart of the sound wave "seems good.  I just tried the presets.  Any suggestions?

  Not really--and this is not really surprising that this does not work in all cases. in fact, it is quite surprising that it works at all, in many ways. Obviously, the worst of the peaks of the break less information will be missing, and when the break comes to the point where the distortion is audible, then lot of data reconstruction is not just there for the software to make assumptions about - no cure so that it is possible.

  Only one pic is not too difficult to reconstruct - you have the slope of the wave of hand and on the other, and all you have to do is find where are the points of y-intercept of the two tracks, and who will be actually rebuild - probably quite precisely. But at the time wherever your clipped signal effectively contains two or more peaks, especially if they are part of a long harmonic, then reconstruction can actually do the distortion that you will inevitably get worse. This is because the software only attempts to reconstruct the waveform of the tracks on part and on the other of the clip, (information) as well as harmonic any expected have been there becomes altered, virtually useful - where increased distortion.

• Best way to remove the apostrophe from the string when loadiing

  Salvation by using an insert statement to load the data some string apostrophe.
  
  Please make sure that all aposrophe of removed from these channels on loading.
  
  What is the best way to reach EThis.
  
  Uisng 11.2.0.3
  
  
  Thank you

  One way:

  with data as
  (
    select 'some '' data' col from dual
  )
  select col, replace(col, '''', '') rep
    from data;
  
  COL         REP
  ----------- -----------
  some ' data some  data 
  

• What is the best way to remove a virus on a Windows 7 computer?

  Hello, so I have a little problem here my pc has contracted a major virus that my my anti virus cannot process. The only way I know to do is to reset my pc to factory settings, my pc came with windows 7 home pre-installed when I bought it. Is there a way I can use the product key on the back of my laptop to reinstall windows 7 when I restore my computer. I would rather not to buy at the store

  Hello

  If you can not remove the malware then follow the good advice of André for resettlement.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER THAT you are sure that the machine is clean of any malware.

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

• Best way to remove points, sections unwanted in CS3

  Hi all

  I am trying to remove a certain element of a path of access/vector based on the position (overlapping) of another path. I found the tool Eraser just can't do everything and is not the best for movements precise or remove.

  As you can see below, I have a green line on the top of the vector background, and I'm trying to remove/delete everything to the right of the green line.

  

  Not sure what is the best way to go about removing some like that. (I guess I have to some how mixed points and select or something?)

  I come from a background in photoshop.

  Any help would be great

  Raptor,

  Assuming that the Greenway past just by: select both, Pathfinder > divide, ungroup (Ctrl / Cmd + SHIFT + G) and delete the unwanted part.