Between the window update and Norton 360 first Edition.

Similar Questions

• WRT 310N worm. 2. cannot update Windows Vista and Norton 360 since I installed this router

  Hello world

  As the topic title says, since the installation of the router WRT 310N worm. 2 on my laptop, Windows Vista, and Norton 360 can not be changed - I continue to receive operation failed errors whenever I try to download the latest version of the software updates or antivirus. Generated error doesn't also have a HelpFile associated with it.

  I went to the admin settings, but since I'm pretty new to routers and wireless technology in general, I'm a little busy with what we have to try so I thought I'd come here and ask the experts.

  Would be very happy for any help!

  Thank you very much
  John

  Thank you, great_white. I will try that first thing when I get home!

  I'll keep you and all readers display updated on what I find.

  Kind regards

  John

• I use Norton 360 first Edition and I dated the 16th of FireFox and it off of my Norton Add-on. When or is there a solution for this. I like FireFox, but...

  All the Norton Norton 360 first Edition Version 20.2.0.19 pluggin
  (a.) Protection of the identity of Norton
  (b.) Norton tool bar
  (c.) vulnerability Norton Protection

  Run Norton LIve Update to update the addons of Norton.

• U2415, around the gap between the Windows desktop and the edge of the monitor (bezel)

  Hello

  I have a Dell Ultrasharp U2415. I've read all the FAQS and I know I have to perform the SUBMISSION, but before doing so, I just want to know if it is normal to have a gap between the Windows desktop and the edge of the screen. If the Windows desktop is not covering or fill the entire screen. There all around the smaller than a 1/4 "gap between the edge of the windows desktop on the edge of the bezel of the monitor, and this model has almost no bezel. The graphics settings in Windows 10 are set to use the native resolution of 1920 x 1200 monitor. I tried with different computers (all windows 10), and the drivers are up to date. The monitor is connected via HDMI since I don't have portable computers not with DP interfaces. Laptop computers have Intel and ATI video cards. I have check the put option to scale on the video card software and it is set to 100%. So, is this gap normal? Is the edge Office Windows 10 supposed to touch the physical edge of monitors?  If the gap is not normal, I will perform the integrated test.

  TIA!

  Based on the YouTube comments, which seems to be normal. "But you must run the APPLICATION to see if the"smaller than 1/4"gap" appears. If Yes, then we can say that it is normal. If this is not the case, then some settings of the operating system is the culprit.

• What is the diffenrece between the Windows Defender and Microsoft Security Essentials? It is worth more than the other?

  Windows Defender vs Microsoft Security Essentials

  What is the diffenrece between the Windows Defender and Microsoft Security Essentials?  One is more recommended than the other or guarantee better security than the other? .. .or do they use the same definition files and also provide a safe protection?

  Please feel free to share your own opinions and thoughts on the comparison of the two programmes.  It would be much appreciated.

  If you run either of these two programs... That who and why?

  Thank you friends.

  Windows Defender is not an anti-virus program. MSE is a comprehensive security program and that you want to use.

• Cannot change the updates of Windows Vista and Norton 360

  I can't change my settings to Windows Update under Vista. I am the administrator and the only user on the computer. I'm used to be able to make changes to the settings, but have not been able to do for a month. Around the same time this started, I have updated my Norton 360. These two things are related? How can I change the settings? Updates download and install fine, but I want to change the planning parameters. Help, please. The computer has restarted several times now, while things were open and caused problems.

  Hello

  Follow the steps here to reset the file or registry permissions

  http://blogs.msdn.com/b/astebner/archive/2006/09/04/solving-Setup-errors-by-using-the-Subinacl-tool-to-repair-file-and-registry-permissions.aspx

  New attempt of changing the settings

  If that fails, run the System File Checker

  Start > type CMD

  Right click on CMD and select run as administrator

  Type sfc/scannow

  Note: there is a space between sfc and / scannow

  Use the System File Checker tool to repair missing or corrupted system files

  http://support.Microsoft.com/kb/929833/en-us

  Try again to change the settings if the scan shows "no breach of integrity".

• Windows Firewall and Norton 360

  I just installed Windows 10 on my computer and have also installed Norton. I get a notification saying that the Windows Firewall is disabled but when I go to turn it on it won't let me and says that Norton that she manages. Norton Firewall is enabled. Does this mean that I can ignore the Windows Firewall and will continue to be protected using Norton Firewall? Is it true that Norton just disables the Windows Firewall and takes over? A bit confused because it's happened on Windows 8.

  Thanks :)

  Your best bet is to contact Symantec.  Your version may even not be Windows compatible, 10.

• 0x8024400a this error is when I strt the windows update and I can't go to xp3. What's the fix

  I rebooted just my computer with windows xp. Before two years, everything went smoothly, but a day of return, it does not update. With difficulty, I loaded IE8, but can not go to SP3. the error code is 0x8024400A. Can U help me.       MUMTAZ

  Why can you not download the full file of SP3? If you use some sort of Download Manager, then do not use it.

  The previous link order:-.

  Download Service Pack 3 (SP3) from the Microsoft Download Center

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  

  Download the Windows XP Service Pack 3 package now

• Impossible to install the windows update and perform the system restore

  Original title: what restore systerm causing failure/Vista

  Windows update fails with a few updates, tried to restore the back before I loaded the system machanic - fails

  Hello

  1. What is the description which are impossible to install updates?

  2. What is the message exact error do you get when you try to install updates?

  3. you get any error message while you perform the system restore?

  I suggest you to follow the steps mentioned below and check if it helps:

  Method 1: Reset components from Windows Update from the link of the suite, which would help you to install the updates of windows. http://support.Microsoft.com/kb/971058

  Method 2:

  If the problem persists, then try to put your computer in a clean boot state, and then try to install the update to windows.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: Manually try to install updates from the Microsoft Download Center.

  a. go to the Microsoft Download site, type the number of "KB" of the update in the download search box and then click OK.

  b. in the list of search results, click on the (KB) Knowledge Base article link to go to the download page. If there is more than one list, look for a link that goes to the Microsoft Download Center.

  c. If there are several versions on the download page, find the appropriate for your computer. Click on the download button and save the update to your desktop.

  d. When you are prompted, click open to install the update.

  Method 4: You can also try to perform the system restore , safe mode and check if the same problem occurs.

  Note: When the computer is in safe mode, System Restore does not restore points. Therefore, you can not undo a restoration you performed when the computer is in safe mode.

  Hope this information is useful.

• Start-up delays between the Windows startup and the logon screen

  I have two PC's that have essentially the same Intel motherboard, but with different form factors. The smallest has a less powerful CPU and a slower hard drive. Still more has a significant delay between displaying the logon screen and Windows startup. Between the two, the display shows a cursor that cannot be moved through the mouse for 30 seconds or more, while on the smaller than the slider shows only for about a second.

  I realize, the problem could be many things, but I'm guessing that material or a device sound driver. I watched the event logs, but I couldn't see anything strange. I expected to see a "CPU does not ' or"USB 3.0 controller has a hardware problem"kind of thing. I ran Intel IPDT but he did not find a problem. Device Manager displays all of the problems. There is no graphics card on a system. I unplugged the USB cable to the printer, but that did nothing. No games are installed on a system. Nothing seems to be overheating. There is no network drive. All drives are SATA and BIOS is set to AHCI.

  Someone at - it the words of wisdom about what should I look for in the event logs?

  If it were my system:

  1. I'd be more suspicious of malware, run ADWcleaner and have a good antivirus program
  2. I would use the manufacturer of my disk drive hard testing program to ensure that it is not a failure
  3. I would like to be sure that none of the drives are more than 75% in use
  4. I would check my memory using the auditor memory Windows 7
  5. I would like to install and run Autoruns to check what is in the startup process
  6. AND, above all, focus on the applications installed.  Some of them are notorious resource hogs who insist on running at startup.
  7. Remove Programs/applications from starting unless I really need to start

  Common unbelievers that cause slow-start ups:

  • Garmin Express
  • Skype
  • uTorrent
  • FrostWire
  • Trusteer

• I try to install the windows update and get error code 8E5E03FB. There are 4 total updates and they all failed. Anyone know what I need to do? __

  I try to install 4 updates to window that are considered important. I get error code 8E5E03FB. When I search what to do there is no specific answer to this error code. Anyone know what to do?

  Reset Windows Update components: http://support.microsoft.com/default.aspx/kb/971058

  Put the computer to boot: http://support.microsoft.com/default.aspx/kb/331796
  Then try to update windows.

  All the best!

• Difference between the formula rule and column aggregation in edit form

  Someone please help this is the use of aggregation formula rule and column in column edit option.
  
  
  What is the difference if I ask the sum in the aggregation rule to apply sum (column name) in the formula in the column.
  
  When do I need to use that one.
  
  
  Thanks in advance

  When you create a column of the RPD, you have the opportunity to determine whether the column should be aggregated in some way or not. For dimension columns, you would not put the aggregation. To say, a column of accounting balance account, you may be putting the SUM or AVERAGE aggregate. Aggregation put you on this column will be 'default' column aggregation in the responses.

  Thus, in Answerrs, if you use the balancing item of the account column and you have only the size of the region, will bring together the OBIEE or SUM the book balances in order to have an AMOUNT for the level of the region. If you district, that the balance of the book column will consolidate at the district level. It is a convenient way to create reports without having to specify what should be aggregation.

  However, OBIEE gives you the ability to override what the default aggregation for a particular column. It is the purpose of the drop down at the bottom left of a column when you click the fx button.

  Say the aggregation by default of the book balance is the SUM of the RPD, but for the report that you create, you want to calculate the average, you can apply the AVERAGE function in the fx window and it will be overridge rule of SUM aggregation which was to the RPD.

  I have it?

• Cannot install Windows updates and updates Antivirus on Windows Vista

  Original title: laptop computer started to freeze on virus scan always on the same folder.carried on the full recovery of the system partition on laptop, then only left with factory shipped programs. Unable to download windows updates or antivirus updates.

  OS Vista Home premium version 6. No display service pack not installed? THAT IS TO SAY 7. After the system recovery, I had 2 anti-virus bootable and performed analytical full but neither anything picked up.

  Hello

  ·        What happens when you try to update windows? You get the error message?

  ·        What are the updates you are trying to install (KB number)?

  ·        What security software you use?

  I suggest to disable the security software and then try to install windows on the system updates and checks to see if you are able to install or not.

  Note: Activate security software once you've done the test.

  Check in the window update and we do know are the updates that you try to install on the system. See the article mentioned below.

  Updates: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

  Step 1:

  It may be that some third party software is running in the background which is interrupted, I suggest you do a clean boot and check. To perform a clean boot follow the steps mentioned in the link given below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you have finished installing, follow step 7 to start the computer in normal startup.

  Step 2:

  Reset windows update components and check. Follow the steps mentioned in the article below.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us

  Step 3:

  I suggest you to run some Surinamese check check the article mentioned below.

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  http://support.Microsoft.com/kb/947821/en-us

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Download updates from Windows updates and Windows Calendar

  I recently got a new laptop to Windows 8. I now have about 800 MB of installed updates. I'm stuck with Hughesnet and their ridiculous data caps. I have a Windows 7 computer that I can update at the end of each month, usually, I have 50 MB or so left each month. But there is no way I could download 800 MB during this period. Is it possible that I could download the updates automatically at night during the bonus period, or could I plan updates during this period. Free time is 2 at 08:00. Thanks in advance!

  Hello

  You can disable the Windows updates.

  Activate the Windows Update and install it during the bonus period. Windows do not have a function to install updates window by scheduling the task.

• I have problems with the installer of Windows and Windows Update, and the solutions that I found for the two each rely on the other broken system to fix the first.

  I use a laptop HP Pavilion dv4-1220us with Windows Vista Home Premium Service Pack 1, a 64-bit operating system, and I have problems with Windows Update and Windows Installer. When I try to install programs, I get the following, or substantially similar message without the error code:

  "Error 1719. The Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »

  So I tried to download Windows Installer 4.5 and install it. When I try to start the installation, it always hangs on the first step, "Initializing Installation."

  After searching for a solution to this problem, I found that Windows Update may have a solution. So I downloaded the 64 bit version and got a file named 'file Windows6. 0-KB942288-v2 - x 64. I tried to run this file. He opened a box that said, in order "Prepare for Installation", "Full Preparation", and finally "Searching for Updates ', before you open a second box, which reads" click OK to install the following Windows software update: fix for Windows (KB942288). I clicked on OK in this box, which opened another box, which says at the top "updates are installed" and in a smaller section, "initializing for Installation................... »

  However, no matter how long it works, it never gets past "Setup initialization."... »

  So I tried to run Windows Update in Control Panel. He ran for a while, before giving a message saying "to check the updates, you must first install an update for Windows Update." I clicked on the button that says "install now". He has flashed, a moment, "download and installation of updates' before you go to the"check for Updates"and then he brought back the exact same upward ' to check updates, you must first install an update for Windows Update" message as before. I clicked install now once again, only to go into the exact same loop. After about four times in a loop, I gave up on it.

  So I tried to install Windows Installer 3.1v2, which took a while before saying "not enough memory is available to process this command." and the abandonment of the installation.

  So, I tried to download a program from 'Mr. Fix - it' of Microsoft. It downloaded fine and then failed on installation, because of the same Setup error I received initially.

  Finally, I tried to restart my computer and each solution is represented. Then I clean my computer and each solution is represented.

  In conclusion, the mistakes that I have in Windows Update and Windows Installer cordoned off each other, as the mistakes of each program are based on the other program to be repaired. I'm at my wit's end here. My computer works fine without one, except that I can't install new programs. I can access the internet fine, access files fine, all my scans have developed own... I don't really know what is happening. Can someone help me with this?

  Try the sfc scan:
  http://support.Microsoft.com/kb/936212

  If not, repair of Vista:
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html