Black-violet gradient - white get in the way - HELP!

Similar Questions

• When I start my computer windows is there but when I go in my section, I get a black screen all I get is the interternet

  black screen - just internet
  I need to solve this problem

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

• HP Jet 7: Black screen with white lines on the HP 7 stream

  I bought my HP 7 stream about 2 years ago and I'm now a black screen with white lines whenever I turn on the tablet.

  Can you kindly help.

  If that's what you see immediately when you turn on, the graphics have not to the Board of Directors.

  These tablets were dropped after the first year of release, and it would not be worth the cost if it could be repaired.

  I'm sorry.

• Black screen with white cursor at the end of the New Installation

  I try to perform a new installation of Windows Vista Home Premium (64 bit) on a Dell Inspiron 1545. The hard drive was completely wiped out and I don't have the original disks (I use a Vista CD from another computer Dell). Installation is proceeding normally up to the phase of "Complete installation" where it crashes for almost an hour and then goes to a black screen with a white cursor.

  I have tried all the following suggestions (found here and on other sites online):

  Reset the BIOS has no effect.

  By pressing SHIFT 5 times has no effect.

  CTRL + Alt + Delete has no effect.

  Rename to the event log file has no effect.

  Remove one of the memory modules if the computer has only 2 GB installed has no effect.

  Running CHKDSK finds no error, and has no effect.

  The attempt to start safe mode causes hang crcdisk.sys.

  Try a normal boot hangs at the screen loading w / loading scroll bar "stuttering".

  Startup Repair runs for hours with no results (I said to cancel after you let it run overnight only to find it still 'work' in the morning)

  Does anyone have suggestions more?

  Thanks in advance! : D

  Dell Media you are currently using may not have drivers appropriate for your PC.

  Contact Dell technical support (have your number of ready service if they ask for it) and ask for the "recovery media" to your specific model number. There may be a small fee involved.

  http://www.Dell.com/content/topics/global.aspx/services/en/dsc_home?c=us&l=en

  J W Stuart: http://www.pagestart.com

• Try to change startup programs, but a problem with Windows Defender gets in the way.

  I'm trying to delete a program to start automatically when my computer starts.  When I go to control panel and click "Edit startup programs" it tells me that Windows Defender is disabled. So I click on "put in operation and open Windows Defender" and get an error message: 0x800106ba

  What is Windows Defender has to do with my startup programs?

  I found a page that step by step has attempted to resolve this message error, but when I got to the step 2, clickStart, click run, type appwiz.cpl , and then clickOK , Windows Defender wasn't on my list to uninstall.

  Any suggestions? I just want to stop a program from starting automatically.

  Thank you!

  I'm trying to delete a program to start automatically when my computer starts.  When I go to control panel and click "Edit startup programs" it tells me that Windows Defender is disabled. So I click on "put in operation and open Windows Defender" and get an error message: 0x800106ba

  What is Windows Defender has to do with my startup programs?

  I found a page that step by step has attempted to resolve this message error, but when I got to the step 2, clickStart, clickrun, type appwiz.cpl , and then clickOK , Windows Defender wasn't on my list to uninstall.

  Any suggestions? I just want to stop a program from starting automatically.

  Thank you!

  1. If you are using Vista, Windows Defender is part of the operating system. It can NOT be uninstalled. He lives and dies with the system.

  2. If you have the following antivirus (AV) installed, Windows defender is supposed to be stopped by the AV:
  Norton
  McAfee
  AVG
  Microsoft Security Essentials

  3 here is another way to startup programs...
  Start button > in the search box, type msconfig > press the Enter key > uac prompt > Startup tab > you can find the program it?

  4. If you have, see if you are able to activate Windows Defender long enough before your AV it stops again...

  Start button > in the search box, typeServices > press the Enter key > scroll to find Windows Defender, click on it >...
  topic status , it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say that, right click on Windows Defender > click Properties > in the new window, make the necessary changes, as above > click OK when finished.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Sidebar looking footer; body gets in the way

  WARNING: I am a new user of Dreamweaver CS5.5 (Windows)!

  I'm having some success by creating a base and attached pages Web site, but I'm stumped as to how to answer my left sidebar with my footer.  Is there an easy answer that doesn't require no written two paragraphs of the code?  The sidebar is a darker shade of green and the footer is a light shade of green, and the white body (which contains my text) shows between the two.

  Thank you for all direct help or advice that you can share.

  
  

  and nonbreaking spaces are not a method of layout and should be avoided.

  As a test, get a preview of your page in Firefox.

  View > Zoom text only.

  Decrease/increase the sizes of text in the browser by pressing Ctrl +++ or Ctrl + - and see what is happening at your disposal.

  Everyone has different browsers, preferences, screen sizes, etc. so what seems OK may be something completely different for other users.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• XPS 8700 - black screen before you get to the screen of Windows 7. Help please.

  Hello. I recently bought 8700 XPS, replaced the 550W PSU and video card MSI GTX 660.

  The problem I have is the booting takes too long, almost 2 minutes. I see the screen black for about 1 minute before it goes to the screen of Windows 7.

  I updated the driver vga for later and others through dell system detects as well.

  What should I do to get rid of the black screen and reduce startup time?

  Boot in the Bios F2. Go to start. Boot USB support is set to disabled? If not, change it to disabled. Press F10 to exit the Bios and reboot.

• Ghostery Tracker shows on my pages on the right and gets in the way. Is there a way to make it invisible

  The purple ghostery thing always shows on the right side of the page and it is very annoying because it delays my time. Is there a way to hide this?

  Go in Modules > Extensions > Ghostery > Options > Advanced tab OR click on the Ghostery icon and choose Options

  You can set (don't forget to click 'Save' after changing the settings):

  • the bubble to appear in one of the 4 corners
  • the duration of the bubble, or
  • does not display the bubble while unchecking this item.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• How can I get rid of the default box on a newly created empty pdf? Has anyone not seen this? It gets in the way!

  A previously requested but so far no response which surprised me because there must be something others have encountered - it's so obvious and 'in your face': is it possible to remove the box by a blue line that is default and centered on the page A4 everytime I create a blank pdf to add fields to- or indeed to convert an existing pdf. It will not allow me to remove it, is not a text box and just gets selected every time that I try to pick anything close to her!

  Thank you in advance to anyone who can answer this crazy problem.

  Well, you selected the append text tool... What happens if you then

  Switch to the hand tool? In my view, that it will not disappear simply.

  The game, October 9, 2014 11:26, acrobition [email protected]>

• at the bottom - the url if you click on it - it passes across the browser. How can I turn off completely - it's annoying and gets in the way

  specifically, this becomes a problem when I'm in a living room discussion of IP - and if it is not a technical problem it is just an annoyance, and I was wondering if there is anyway to disable. Then maybe I can see the url at the top near the menu bar or not at all.

  You can use this extension to hide the ToolTip that indicates the URL for a link on hover and other data that was previously in the status bar.

  • Evar-4-status: https://addons.mozilla.org/en-US/firefox/addon/status-4-evar/

• next to the Start button on my computer that I don't have my pieces of information listed there now modzilla and internet explorer outlook express. How to get back the Please help, as I'm very new with computers, so I really need help

  I recently added some things and I've lost my things on the bottom of my screen modzilla, internet exployer and outlook express and I do not know how to get them back, I have not removed the programs that they are simply not on the screen when it is launched upward after the connection. Thank you

  Right click on the taskbar > toolbars > select Quick Launch bar Microsoft Security MVP, 2004-2010

• Laptop does not charger and cannot get into the Bios, help!

  Hi, I own an Acer Aspire 6935 G, so far he treated me so. Recently, the charger port broken (one of the wires came loose). I have brought a replacement and mounted in it, but on my charger fuse blew!

  Then I took another replacement just to the case where there has been previous replacement I bought and nothing major, new replacement seems to work well (lighs load lights up) but it does not all power in the laptop. Witnesses of load lights as indicated, but the laptop won't before the Acer splash screen. Due to the battery being dead, I can't access bios set up so I can check the status of my laptop not enter recovery. I was wondering if it could be something other than a hardware problem, and if this is the case; It is expensive to do is fixed or am I better off buying a new laptop?

  Thanks in advance!

  This is a:

  Acer Aspire

  6935G

  Intel Core DuoT6400

  4 GB OF RAM

  Windows 7 Ultimate

  Edit: There is think beep when the chargers plugged into the lapto, if that makes a difference?

  Lugman > recently, the charger port broken (one of the wires came loose). I have brought a replacement and mounted in it, but blew the fuse on my charger! >>>

  Sorry, but it does look like a hardware problem. Sounds like the power supply may be about to blow another fuse. I think you have a short or large scale electric leakage somewhere that prevents charging of the battery and power - it but maybe not enough (yet) to blow another fuse or switch off the LEDs.

  First remove the battery and power connections before you tear things. The first place I would look is around the port of loading where your problems started and hope that it's not deeper in the system where it can cause some MB or more serious damage. Look for the places where the lines of welding on the System Board may be in contact with a screw or a metal on the ground. While you're there, reconnect both ends of all accessible Ribbon (like the video and keyboard) connectors. Also to the HARD drive, modules of memory vivid and all the other connectors for component for good measure.

  Once you have checked everything, and before you have wound all caches and screws, see if you can carefully insert the battery into the receptacle and plug the charger. Don't try to power. You can do this on an insulating surface to avoid the land of naked drivers. The LED light looks like he is in charge? If so, let it continue to charge without trying to power on. I think after 4-5 hours, the led that would indicate a fully charged battery. If so, I would try and then power on. If not, and it's still seems to be in charge, stop, do not try to and we will draw the next steps.

  Jack E/NJ

• When I enlarge my brush as it gets all the mishapen.help? (Cs6)

  The size that he does this to seems different for each brush and its really annoying because I want to use the range of size to cover large surfaces. A brush it is to 250px and another the fact to 185px.  The calliberation is off too when this happens. Sometimes it makes it weird to the multiple images of brush. other times it's a semi oval or X curve.

  Does anyone else have this problem? any help?

  Update your driver from the website of the manufacturer of the GPU video card.

• SQL + reel, white space in the columns, help.

  Hi all.
  
  I use SQL on Oracle Database 10g Enterprise Edition Release 10.2.0.3.0
  
  I have a massive script that I am wanting to wrap the output to a text file.
  
  I have more than 600 columns and the script is like:
  
  set the position
  trigger the echo
  Set feedback off
  set verify off
  Set serveroutput off
  termout off Set
  Set trimout on
  Set trimspool on
  tab set to
  NewPage 0 value
  set space 0
  set linesize 6251
  set pagesize 0
  the null value 0
  define array 1000
  the value of colsep |
  coil c:\[filename].txt
  Select / * + parallel (table 4) * /.
  col1,
  col2,
  col3,
  COL4,
  col5,
  col6,
  col7,
  COL8,
  col9,
  col10,
  Col11,
  col12... etc.
  
  My output looks like:
  
  99990001 | + {space} + 2003 | 0 + {space} + | 0 + {space} + | + {space of} + 1 | 0 + {space} + | 0 + {space} + | 0 {space}. 0 + {space} + | 0 + {space} + | 0 + {space} + | 0 + {space} + | 0 etc
  
  When I need to look like:
  
  99990001 | 2003 | 0 | 0 | 1. 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0... etc.
  
  I can't concatinate columns as this would force the SET NULL option won't do not and using NVL for each column makes the query take too much time.
  
  a post on this thread Re: save output sql command separate values by the States that you cannot force coil of sql to remove spaces, is it true?
  
  all threads in this research http://forums.oracle.com/forums/search.jspa?threadID= & q = colsep & objID = c84 & dateRange = last90days & userID = & numResults = 15 lead me to believe that it is also not possible.
  
  The coil may not have gaps as it is used by some sort of contraption of system before my time to really understand and I said that it's just not having them.
  
  Thanks in advance for any help.
  
  G

  I think that concatenating your columns with NVL(col1,0) will be your only option. In addition, it didn't really the request that much more time.

• Delete firefox toolbar from office - this is the way the

  There is a toolbar "search the Web" on the top of my desk. It gets in the way. I don't want it. How to remove it?

  Please provide a screenshot of this 'office' toolbar Of course is not sound like something that comes with Firefox.

  https://support.Mozilla.org/en-us/KB/how-do-i-create-screenshot-my-problem

  It is best to use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed a maximum file size of 1 MB.
  

  Then use the Browse .... button below the Post a Reply text box to upload the screenshot.