BMP is a failure during the installation of plugins.

Similar Questions

• Power failure during the installation of Windows 7

  We had a power failure most when setting up my Windows 7 upgrade installation and it will not complete the installation. I downloaded the iso image and an installation DVD, but it does not start the machine. I checked the DVD works on another box of Windows 7, so I'm stuck. I ran the front compatibility checker I tried to upgrade and we found some good things. Any advice in addition to the upgrade of the mother/processor board?

  Remove the hard drive from the computer, connect it to another format only the Windows partition, reinstall it to the original host and try to re-run the installer of Windows...

• Pavilion a409.uk fails to copy files during the installation of XP.

  Hello

  I have a Pavilion a409.uk, which is a failure during the installation of Windows XP Professional SP2

  I get a file copy error "Setup cannot copy the file sqls20.dll.

  This is a clean install, deleting the previous partitions and create a new installation.

  I do not have access to any original CD, I use genuine XP CD with SP2 preinstalled.

  I tried same CD and I get exactly the same error.

  Tried a CD of XP (SP1) same error, different file...

  Tried a CD even before (pre - SP1) same error, different file.

  Thinking that it is not the disc, I tried to replace the Ribbon IDE, no effect.

  Tried to replace the CD player, no effect.

  Tried to replace the HDD, no effect.

  The HARD disk is a regular IDE device, with a 80 Ribbon IDE wire.

  It's not a SATA drive and as such, there is no need to load additional drivers for only install.

  Tried to find any idea on the HP site, none showing that I can see.

  Before I write off that box, anyone got any ideas?

  Thank you very much

  I came across it once and after that much hair pulling it is a bad stick of memory. If you have 2, try removing one and try the install again. If the same thing happens to pass the memory sticks & try again.

   

   

• Cannot install this hardware. An error occurred during the installation of the device

  Can someone please HELP ME - I get the following error message: cannot install this hardware. An error occurred during the installation of the device. They system cannot find the specified file.

  I am not able to connect any hardware. It started all of a sudden. I can't connect my mouse so it before I'm not able to use my computer.  He did the same thing when I put in a USB key, there was the same error message.

  If something is damaged? How can I resolve this - pleaseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee.

  Looks like you may have a virus or other malware. Get your updated antivirus program and start safe mode.  Note that some viruses can hide from your normal antivirus program, so you really need to scan mode without failure.  To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode.  Then run a complete system scan.
  Microsoft has suggestions and offerings to
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
  Moderator Forum Keith has a few suggestions along this line to
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3
  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem.  To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore.  Click on the box that says show more restore points.
  You can check the corrupted system files.  Open an administrator command prompt and run SFC if the above does not help. Click START, and then type sfc in the search box, right-click to SFC. EXE, then click on run as administrator. Then from the command prompt, type sfc/scannow.
  Finally if all else fails, you can look at the rather cryptic system event log.  To make, click Start-> Control Panel-> administration-> event viewer tools.  Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.
   
  I hope this helps.  Good luck.

• turn off the power of the computer during the installation of updates

  I have this problem that I accidentally unplugged my pc during the installation of an update the welcome menu and now whenever I turn on my pc it freezes on the welcome menu with this same screen installation of updates on. but I see that there is the home menu running hidden behind this frozen screen. After that there this frozen screen 2 min later it automatically restarts this whole process again. I never did any changes to this computer its stock of all.

  Please help me to solve this :(

  I have this problem that I accidentally unplugged my pc during the installation of an update the welcome menu and now whenever I turn on my pc it freezes on the welcome menu with this same screen installation of updates on. but I see that there is the home menu running hidden behind this frozen screen. After that there this frozen screen 2 min later it automatically restarts this whole process again. I never did any changes to this computer its stock of all.

  Please help me to solve this :(

  Hey tony1232

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below has the way to download with a vista disk startup repair that you can boot from if you do not have a microsoft dvd vista

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  Walter, the time zone traveller

• error 0 x 80040705 occurred during the installation of windows essentials.what to do?

  error 0 x 80040705 is produced during the installation of windows essentials.what do? Help me please.

  Hello

  Thank you for contacting Microsoft Answers.

  This error is caused by a lack of installation of DirectX. Usually some DX files are already installed, but Setup cannot overwrite them. In my case, some of the files in \windows\SystemWOW64 have been accidentally encrypted, and the Setup program does not overwrite them. I had to manually delete these files for the Setup program to succeed. The cause may be different for you, but following these steps should help to understand which files DX are the cause of the problem.
  1. Install DirectX User Runtimes (refreshed June 2010) of http://www.microsoft.com/download/en...ang=en&id=8109
  You will be asked to choose the directory to put the files extracted from the cabin.

  2. run dxsetup.exe from the directory in step 1.

  3. installation failure will probably happen. Look at \Windows\Logs\DXError.log and find the report. INF in the error log file.
  For example:
  [13/07/11 20:36:35] module: dxupdate (Mar 30 2011), file: dxupdate.cpp, line: 2056, function: ExecuteInf
  Has no API: SetupInstallFromInfSection()
  Error: (5) - access is denied.
  Cannot install C:\Users\Foo\AppData\Local\Temp\DXA1BC.tmp\d3dx9_31_x86.inf: [x64_install]. The file is possibly corrupted.
  4. the INF files are files of configuration information, which are used to install the files listed in these. In this example, d3dx9_31_x86.inf is the. INF file. First, try to determine the. DLL file installed with this INF using the name of the INF file and look for a DLL with a name similar to \windows\systemwow64, if you are using 64-bit Windows, in \windows\system32, if you are using 32-bit Windows. In many cases, the name of the INF should tell you what DLL it installs, as shown in the examples below:
  
  xinput1_3_x86.inf install xinput1_3.dll
  d3dx9_33_x86.inf installs d3dx9_33.dll
  d3dx9_31_x86.inf install d3dx9_31.dllif you can't say the name that installs DLL has failed, you will need to watch the CAB file. See \Windows\Logs\DirectX.log to determine what CAB file has been processed before the error. Go to the directory you have chosen in step 1, and then open this CAB file in Explorer file by double clicking it. That will open a window of the Explorer showing the files in the cabin, including a file INF open the INF file, by right-clicking on the file and choosing extractin the menu contextual. The INF file has entries indicating that it installs the DLL as follows:

  [DirectX_System]
  D3dx9_38.dll [DirectX_SysWOW64]
  D3dx9_38.dll
  5. the likely installation failed because this DLL could not be replaced by the installation program. Find out why it could not be crushed and delete it manually from \windows\systemwow64 or \windows\system32.

  6. go to step 2 and repeat until the installation is successful.

  See you soon.

• Error 0 x 80080206 during the installation of asphalt 8

  Separated from this thread.

  I can't hulu more to install onto RT. error 0 x 80080206; no idea how to solve this problem?

  Original title: trouble installing apps

  I m getting the same question during the installation of asphalt 8. and nothing help me. As I see this post is 2 years old, but this issue still exists, with many users like me, what kind of support and service that you provide to us.

  Hi Jitenderpal.

  Welcome to the Microsoft community.

  To help you better I would like to know the details below.

  • What is the make and model of the RT Windows supported device you are trying to download and install asphalt 8?

  I understand that you have a problem with the installation of asphalt 8. The 0 X 80080206 error can be caused if there was a failure in the operation of your system. Common reasons include incorrect or failed installation or uninstallation of the software that may have left invalid in your Windows registry entries, the consequences of an attack of viruses or malware, improper closing of the system due to a power failure or other factors.

  Method 1:

  I ask you to perform the steps in the Microsoft Help article below and check if it helps.

  http://Windows.Microsoft.com/en-in/Windows-8/why-find-install-app-Windows-store

  Method 2:

  Put the computer to boot and try to install the app, see the support article below. This will eliminate the conflicts of software that occur when you install a program or an update or when you run a program

  https://support.Microsoft.com/en-us/KB/929135

  Note: Please go through the section: how to reset the computer to start as usual after troubleshooting by clean boot of section of Kb to start the computer in normal startup after having resolved the issue.

  Hope this information helps you. If the problem continues to respond to us with the results to help you best.

• Agent failure during the ownership change processing

  Hello

  Could someone help me in this issue:

  Data collection is stopped due to the following error:

  15-02-2013 02:08:43.916 ECHO ERROR [IncomingMessage-12294] com.quest.glue.core.jfogbank.JFogbankAgentImpl - an unexpected error has occurred which may cause undesired behavior. You can contact Quest Software customer support if you see this error again: Agent failure during the ownership change processing
  java.io.IOException: no connection is made to com.quest.glue.core.jfogbank.JFogbankAgentImpl@6176959c
  at com.quest.glue.core.jfogbank.JFogbankServer.waitForConnection(JFogbankServer.java:403)
  at com.quest.glue.core.jfogbank.JFogbankAgentImpl.startDataCollection(JFogbankAgentImpl.java:295)
  at com.quest.glue.core.jfogbank.JFogbankAgentImpl.propertiesChanged(JFogbankAgentImpl.java:475)
  to com.quest.glue.core.services.ASPServiceImpl$ ListenerAdapter.propertiesChanged (ASPServiceImpl.java:606)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:886)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:908)
  at java.lang.Thread.run(Thread.java:662)

  15-02-2013 02:08:43.916 ECHO [IncomingMessage-12294] INFO com.quest.glue.core.services.AgentStatusServiceImpl - failure reported Agent
  15-02-2013 02:08:49.673 ECHO VERBOSE [Windows_System_on_ctsintcovsods3.cts.com AgentStatusService] com.quest.glue.core.agent.AgentInstance - data collection to stop

  What does this error mean?

  Kind regards

  Shiva

  Hey Shiva,

  you are probably using the OS cartridge inherited on x86_64, RHEL or CentOS 6.3 or earlier.

  You must install both 32-bit libraries to do the data collection:

  • -glibc.i686
  • -nss - softokn.i686

  Why is this?

  By dΘfaut x86_64 installation does not seem to install libraries 32 bits, which prevents OSCart commissioning agents.

  Fortunately, OSCart agents are largely independent, and only the C 32-bit kernel libraries (and their dependencies) must be installed in order to get the agents running. Needed to support packages are available on the RedHat 6 32-bit installation DVD in the directory {{packages}}.

  https://support.quest.com/SolutionDetail.aspx?ID=SOL89778

  Best regards, Falco

• root.sh failed during the installation of RAC11.2g

  Dear,

  I try to install RAC 11.2 (version of the grid Infrastructure is 11.2.0.1) on both nodes of linux (OS version is 2.6.39 - 400.215.10.el5uek Oracle Linux 5.11)

  SELinux + Firewall is stopped, ASM works fine (listdisks and querydisk has my drives correctly), ping between two nodes on public and private IPs is OK, the hosts file, configured for good.

  Owner of the DSO is grid user, and this user is the same used during the installation of the grid infrastructure.

  # /sbin/modinfo oracleasm
  filename:       /lib/modules/2.6.39-400.215.10.el5uek/kernel/drivers/block/oracleasm/oracleasm.ko
  description:    Kernel driver backing the Generic Linux ASM Library.
  author:         Joel Becker <[email protected]>
  version:        2.0.8
  license:        GPL
  srcversion:     28484D2A43A6D981AAB9246
  depends:        
  vermagic:       2.6.39-400.215.10.el5uek SMP mod_unload modversions 
  parm:           use_logical_block_size:Prefer logical block size over physical (Y=logical, N=physical [default]) (bool)
  

  Installation was fine, no errors or warnings until running root.sh, the result was:

  
  

  # /opt/app/grid/product/11.2.0/grid/root.sh
  Running Oracle 11g root.sh script...
  
  The following environment variables are set as:
      ORACLE_OWNER= grid
      ORACLE_HOME=  /opt/app/grid/product/11.2.0/grid
  
  Enter the full pathname of the local bin directory: [/usr/local/bin]: 
     Copying dbhome to /usr/local/bin ...
     Copying oraenv to /usr/local/bin ...
     Copying coraenv to /usr/local/bin ...
  
  
  Creating /etc/oratab file...
  Entries will be added to the /etc/oratab file as needed by
  Database Configuration Assistant when a database is created
  Finished running generic part of root.sh script.
  Now product-specific root actions will be performed.
  2015-04-20 17:06:03: Parsing the host name
  2015-04-20 17:06:03: Checking for super user privileges
  2015-04-20 17:06:03: User has super user privileges
  Using configuration parameter file: /opt/app/grid/product/11.2.0/grid/crs/install/crsconfig_params
  Creating trace directory
  LOCAL ADD MODE 
  Creating OCR keys for user 'root', privgrp 'root'..
  Operation successful.
    root wallet
    root wallet cert
    root cert export
    peer wallet
    profile reader wallet
    pa wallet
    peer wallet keys
    pa wallet keys
    peer cert request
    pa cert request
    peer cert
    pa cert
    peer root cert TP
    profile reader root cert TP
    pa root cert TP
    peer pa cert TP
    pa peer cert TP
    profile reader pa cert TP
    profile reader peer cert TP
    peer user cert
    pa user cert
  Adding daemon to inittab
  CRS-4123: Oracle High Availability Services has been started.
  ohasd is starting
  acfsroot: ACFS-9301: ADVM/ACFS installation can not proceed:
  
  acfsroot: ACFS-9302: No installation files found at /opt/app/grid/product/11.2.0/grid/install/usm/EL5/x86_64/2.6.18-8/2.6.18-8.el5uek-x86_64/bin.
  
  CRS-2672: Attempting to start 'ora.gipcd' on 'node01'
  CRS-2672: Attempting to start 'ora.mdnsd' on 'node01'
  CRS-2676: Start of 'ora.gipcd' on 'node01' succeeded
  CRS-2676: Start of 'ora.mdnsd' on 'node01' succeeded
  CRS-2672: Attempting to start 'ora.gpnpd' on 'node01'
  CRS-2676: Start of 'ora.gpnpd' on 'node01' succeeded
  CRS-2672: Attempting to start 'ora.cssdmonitor' on 'node01'
  CRS-2676: Start of 'ora.cssdmonitor' on 'node01' succeeded
  CRS-2672: Attempting to start 'ora.cssd' on 'node01'
  CRS-2672: Attempting to start 'ora.diskmon' on 'node01'
  CRS-2676: Start of 'ora.diskmon' on 'node01' succeeded
  CRS-2676: Start of 'ora.cssd' on 'node01' succeeded
  CRS-2672: Attempting to start 'ora.ctssd' on 'node01'
  CRS-2676: Start of 'ora.ctssd' on 'node01' succeeded
  
  DiskGroup DATA creation failed with the following message:
  ORA-15018: diskgroup cannot be created
  ORA-15130: diskgroup "DATA" is being dismounted
  
  
  Configuration of ASM failed, see logs for details
  Did not succssfully configure and start ASM
  CRS-2500: Cannot stop resource 'ora.crsd' as it is not running
  CRS-4000: Command Stop failed, or completed with errors.
  Command return code of 1 (256) from command: /opt/app/grid/product/11.2.0/grid/bin/crsctl stop resource ora.crsd -init
  Stop of resource "ora.crsd -init" failed
  Failed to stop CRSD
  CRS-2673: Attempting to stop 'ora.asm' on 'node01'
  CRS-2677: Stop of 'ora.asm' on 'node01' succeeded
  CRS-2673: Attempting to stop 'ora.ctssd' on 'node01'
  CRS-2677: Stop of 'ora.ctssd' on 'node01' succeeded
  CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'node01'
  CRS-2677: Stop of 'ora.cssdmonitor' on 'node01' succeeded
  CRS-2673: Attempting to stop 'ora.cssd' on 'node01'
  CRS-2677: Stop of 'ora.cssd' on 'node01' succeeded
  CRS-2673: Attempting to stop 'ora.gpnpd' on 'node01'
  CRS-2677: Stop of 'ora.gpnpd' on 'node01' succeeded
  CRS-2673: Attempting to stop 'ora.gipcd' on 'node01'
  CRS-2677: Stop of 'ora.gipcd' on 'node01' succeeded
  CRS-2673: Attempting to stop 'ora.mdnsd' on 'node01'
  CRS-2677: Stop of 'ora.mdnsd' on 'node01' succeeded
  Initial cluster configuration failed.  See /opt/app/grid/product/11.2.0/grid/cfgtoollogs/crsconfig/rootcrs_node01.log for details
  
  

  
  

  I found the rootcrs_node01.log file:

  2015-04-20 17:06:20: Removing "/etc/rc.d/rc3.d/S96ohasd"
  2015-04-20 17:06:20: Removing file /etc/rc.d/rc3.d/S96ohasd
  2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc3.d/S96ohasd
  2015-04-20 17:06:20: Failed to remove file: 
  2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc3.d/S96ohasd" pointing to /etc/init.d/ohasd
  2015-04-20 17:06:20: Removing "/etc/rc.d/rc5.d/S96ohasd"
  2015-04-20 17:06:20: Removing file /etc/rc.d/rc5.d/S96ohasd
  2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc5.d/S96ohasd
  2015-04-20 17:06:20: Failed to remove file: 
  2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc5.d/S96ohasd" pointing to /etc/init.d/ohasd
  2015-04-20 17:06:20: Removing "/etc/rc.d/rc0.d/K19ohasd"
  2015-04-20 17:06:20: Removing file /etc/rc.d/rc0.d/K19ohasd
  2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc0.d/K19ohasd
  2015-04-20 17:06:20: Failed to remove file: 
  2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc0.d/K19ohasd" pointing to /etc/init.d/ohasd
  2015-04-20 17:06:20: Removing "/etc/rc.d/rc1.d/K19ohasd"
  2015-04-20 17:06:20: Removing file /etc/rc.d/rc1.d/K19ohasd
  2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc1.d/K19ohasd
  2015-04-20 17:06:20: Failed to remove file: 
  2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc1.d/K19ohasd" pointing to /etc/init.d/ohasd
  2015-04-20 17:06:20: Removing "/etc/rc.d/rc2.d/K19ohasd"
  2015-04-20 17:06:20: Removing file /etc/rc.d/rc2.d/K19ohasd
  2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc2.d/K19ohasd
  2015-04-20 17:06:20: Failed to remove file: 
  2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc2.d/K19ohasd" pointing to /etc/init.d/ohasd
  2015-04-20 17:06:20: Removing "/etc/rc.d/rc4.d/K19ohasd"
  2015-04-20 17:06:20: Removing file /etc/rc.d/rc4.d/K19ohasd
  2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc4.d/K19ohasd
  2015-04-20 17:06:20: Failed to remove file: 
  2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc4.d/K19ohasd" pointing to /etc/init.d/ohasd
  2015-04-20 17:06:20: Removing "/etc/rc.d/rc6.d/K19ohasd"
  2015-04-20 17:06:20: Removing file /etc/rc.d/rc6.d/K19ohasd
  2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc6.d/K19ohasd
  2015-04-20 17:06:20: Failed to remove file: 
  2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc6.d/K19ohasd" pointing to /etc/init.d/ohasd
  2015-04-20 17:06:20: The file ohasd has been successfully linked to the RC directories
  
  

  
  

  What did I miss?

  
  

  Kindly advice...

  Best regards
  

  Hello

  It seems some problems with the drive carrier

  Create DiskGroup DATA failed with the following message is displayed:

  ORA-15018: diskgroup cannot be created.

  ORA-15130: diskgroup 'DATA' is currently disassembled

  Check below link, seems a similar question:

  ASM error in root.sh createdisk

  Thank you

  Monowar

• I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I tried the holding of 'command-r' and 'option' to see if the problem can be resolved or try any boot from a boot disk, my old backup, USB function start - but after a slow long process it all just stops.

  There is software on my HD that I don't want to lose by simply reformatting the computer, because I am now in a different country, far from my house, which is another problem of the Apple Store, to reinstall my OS from Yosemite on the www.

  Hey AmnonMikeCohen,

  Thank you for being a part of the communities of Apple Support.

  I understand that your Mac is not start properly after the power went out.  Let's start with resetting the SMC and NVRAM on your Mac and see if he can start from there:

  Reset the management system (SCM) controller on your Mac.

  How to reset the NVRAM on your Mac.

  See you soon.

• Whenever I try to update my iPhone 6 for the ios10 it is said it is impossible and that an error occurred during the installation? I ' have enough free space, so I'm not real why he keeps now.

  Whenever I try to update my iPhone 6 for the ios10 it is said it is impossible and that an error occurred during the installation? I ' have enough free space, so I'm not real why he keeps now.

  Try to update via iTunes.

  See you soon,.

  GB

• Mac lost during the installation of windows

  When installing windows on a MAC, I deleted my partition mac completely and I am now left with windows 7 to my mac book air. Y at - it an option to install mac, I don't mind losing the windows partition

  Hello smarthala,

  Thank you for using communities of Apple Support.

  I see that you deleted by mistake your Mac partition during the installation of Windows. The partition itself deleted or was it the Mac OS that has been erased, leaving an empty partition?

  If the latter, you can reinstall OS X from OS X Recovery. See this article for how that should be done: On OS X Recovery
  Otherwise, you can use Internet recovery (Command-Option-R, as opposed to the command-R) to repartition the entire hard drive and install the version of Mac OS X provided on your Mac. Who is finished, you can upgrade to El Capitan via the App Store > bought.

  Best regards.

• Cannot install roboform 7.9.8.5 in every night, does not allow the selection of Firefox to be selected during the installation. go to address?

  Windows 8.1 last Firefox, Roboform 7.9.8.5.
  During the installation of Roboform and selecting the browser to install it on the only browser which is selectable are IE, firefox and chrome are grey.

  33.0 Nightly of Firefox is a version of alpha 1 pre-release tester.
  Check with Roboform to see if they take over the alpha or beta of Firefox versions.

• Failure during the upgrade to El captain

  Hello

  Trier just to run the El captain of my Mac Book Pro late 2008, 500GB, 4 GB upgrade Yosemity.

  After several attempts, I have to capitulate.

  The Message is that the absence during the installation and the options are retry and save the log file.

  Before the upgrade, it worked very well with all the problems.

  Have been looking for solutions and I do not know if the recovery online could help me!

  I don't have a lot of work put in Photo I am very interested with a recovey that saves my work...

  (Yes, I was to stupid to do a backup before the upgrade)

  Any chance of recovering the contents of my HD

  Allan continues

  This could be a missing file that had not resulted in anything until an update.  I had to save and clean install the operating system. I had a similar problem and take mine to the Apple Store to be fixed, it turns out was a broken HD support, who can apparently cause this problem.  You must back up either with Time Machine or external plug your hard drive to another computer and copy the files you want to save. (TimeCapsule is easier), then take it in to be looked at, they can run Diagnostics on the Apple Store.

  See you soon,.

  Adam

• Updated since version 7 or 8 during the installation SETUP message - your computer must be restarted to complete a previous update of Firefox. Do you want to restart now?

  Updated since version 7 or 8 during the installation SETUP message - your computer must be restarted to complete a previous update of Firefox. Do you want to restart now? Options are 'yes or no'. Option 'Yes' restarts my computer & the attempts to Firefox, I get the same message. Reboot several times has no effect. The option 'no' closes the file and nothing happens. Running XP Pro version 2002 SP 3. All normal programs have been updated to the current date (Adobe, Java, etc.).

  Do a cleaning (re) install and delete the folder of the program Firefox (C:\Program Files\Mozilla Firefox\).

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

  Uninstall your current version of Firefox if possible.

  • Do not remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall