Bookmarks toolbar will not show bookmarks

Similar Questions

• iPad Mini will not show iOS10 update?

  Hi all.

  My iPad mini 1st generation will not show the update option to iOS10 via iTunes or wireless.

  Any suggestions how?

  Your iPad CPU is not powerful enough to run iOS 10.

  (144743)

• I have the latest version of FF and the latest version of Roboform... everything has worked perfectly until an hour ago... now the Robofrom toolbar will not work... its

  I have the latest version of FF and the latest version of Roboform... everything has worked perfectly until an hour ago... now the Robofrom toolbar will not work... says not compatible... it is activated in Add ons... nothing has been put to day or changedf suddenly just no toolbar and it will not tie

  RoboForm will probably have an update for Firefox 30 when Firefox 30 is actually out, if not sooner. No need to turn off the automatic updates now.

• My Apple TV is only to play a sound on my iPad but will not show the film?

  My Apple TV is only to play a sound on my iPad but will not show the film?

  Welcome to the Jennifer Apple community.

  Some content providers don't block the video portion working with AirPlay, have you checked to see if AirPlay is supported by this provider.

  If it is supported

  these steps, check to see if things work after each step if necessary, before you try the next.

  1. Check AirPlay is on the Apple TV (turn market if it already is)
  2. Check that both devices are on the same network (settings > Wifi on the mobile device and the settings > General > network, on the Apple TV).
  3. Restart the Apple TV (settings > general > restart).
  4. Restart the Apple TV by removing ALL cables for 30 seconds.
  5. Restart your router. (Also try to remove the power cord for at least 30 seconds)
  6. Restart your mobile device.

  If you're still having problems, the following article can help you.

  Troubleshooting AirPlay

  Troubleshooting connections and Wi - Fi networks

  Recommended Wi - Fi settings

  WiFi Diagnostic Software (for Mac users)

  You will also find help on this page, where I have collected some of the more unusual solutions for network problems.

  When you make adjustments to your network for better optimization, you can find some of the points mentioned onthis page useful.

• When I go to my computer, then program files it will not show me the exe files

  When I go to my computer, then program files, that he will not show me the exe files, that told me what to do not have full administrator control, when I go to the page showing which is the administatrator he show me has a control total why he let me not see the exe files, it also leaves me not so far closed for my dvd writer dishes?

  Try Control Panel, user accounts, click the account, make sure that its listed as 'administrator '.

  close. Then, in control - panel.open 'Options records' stand & check the box 'Show hidden '.

  files & folders", uncheck uncheck them next box"Hide extensions"next"Hide protected. "

  files/folders", nearby... This you gives access, however, once youre thru with youre editing

  or see the files/folders, you must restore default in 'Folder Options '...

• When a small sign of movie is available as an attachment 'he' will not show picture but sound turns on and that 'it' will not leave

  problem title: original accessory

  When a small sign of movie is available as an attachment 'he' will not show picture but sound turns on and that 'it' will not leave.  Help!

  When a small sign of movie is available as an attachment 'he' will not show picture but sound turns on and that 'it' will not leave.  Help!

  What do you say "he's not leaving"? He kept playing with his only non-stop?
  If it is 'yes' or 'no', you can always he kill 'soft' media player.

  Take a look at your video accessory. What are the last 3 numbers, such as avi, mpeg, mov etc. ?
  It is possible that your video accessory is in a format unsupported by Windows Media Player.
  Save it in a folder of your choice.
  Googe for a FREE video converter (if you do not have one) and convert the video file toWMV.
  Now you should be able to read in the drive media with images and sounds.

  t-4-2

• Create a model that can be replicated, but will not show changes in the original model, which occurs in any comps duplicated from it?

  I imported a doc I - 4 layers. Then I dragged these 4 layers in a new comp - comp1. I would like to reproduce this model so that I can try different things using these same 4 layers. But when I duplicate the comp I did - comp 2 - any change I make appear in comp1. How can I create a model that can be duplicated - but will not show changes in the original model, which occurs in any comps duplicated from it? Thank you very much!

  (CS5.5)

  It is a common misunderstanding when you start working in Ae. It takes time to get used to, and even veterans are still this error from time to time. Here's the thing, you have to get in your head: your project Panel is where your source material is, and the timeline is the place where there is a representation of this source. This means that if you duplicate an item in your timeline (particularly relevant for the precomps) it will duplicate a copy, not the source. so, if change you it - it will change all instances of this copy. If you want to duplicate a precomp and create another source, you will need to do it in a 4 step operation:

  1. duplicate your precomp in the timeline (you got that day)
  2. Select the source of this copy in the project Panel (currently the same precomp)-right click on the-> precomp 'reveal the source layer project.
  3. duplicate the precomp selected in the project Panel
  4. replace the copy in your panel mounting with the duplicate of the Source Panel (shortcut - Ctrl + alt + / when both are selected, or drag it to double with pressing Alt)

  what you are really duplicate the precomp twice - once in the project window and once in the timeline, and then one link to the other.

• AfterEffects CS6 will not show on my Adobe Creative cloud. I work in a school district. The error message is: ' we are currently experiencing some issues, please try again later. " If the problem persists, contact customer service. "It is to go

  AfterEffects CS6 will not show on my Adobe Creative cloud. I work in a school district. The error message is: ' we are currently experiencing some issues, please try again later. " If the problem persists, contact customer service. "This has happened during about two weeks, give or take. Everything is displayed. Are there patches? Thank you

  You MUST have a 64-bit computer and operating system... What is your computer?

  -Programs are supposed TO not view or download if they are not installed on your computer

  MINIMUM for After Effects and Premiere Pro http://helpx.adobe.com/premiere-pro/system-requirements.html

• How can I change the workspace to a color for my computer screen will not show

  How can I change the workspace to a color for my computer screen will not show	Submit question

  	Submit question

  Photoshop CS6 now opens by default with the "Application Framework" lighted. You can go window > frame application in the main menu and uncheck this

  We have a lot of useful information in the FAQ section. The answer to this question was also there. See the link:

  FAQ: UI - how do I change the color theme, text size, or cut the course of enforcement?

  Feel free to browse other FAQS, there might be a few other things of interest.

  Guinot

• Safari will not show Google Maps

  Just recently, I can't get Safari to display Google Maps - I use the version 9.0.3. I do a Google search for Google Maps and it shows a URL of type https://maps.google.co.uk , but if I click the link it translates into https://www.google.co.uk/maps and all that I get a blank page or one that shows just the words "Google Maps" in the upper left corner, without notice, that something is wrong.

  There was a suggestion in another thread that there was a problem with the DNS name servers but I already use the OpenDNS ones, and I have no problem at all with Firefox that shows the cards correctly. If I copy the URL using Firefox in Safari, I get the same result as before. It can be the cause of this problem?

  Try to run the update from the drop-down list. It contains a new version of Safari, which can solve the problem.

  10.11.4 update combo

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

• Subvi signpost will not show first time

  I have a Subvi in my program called several times, when it is called, it will open the front panel. The message is sent to primary vi. My problem is that if the LabVIEW is a new beginning, this text indicator will not appear. It will show you all that send to it later, even after the termination of program and start over. If I close the program and then open it again, it will happen again. Does anyone have a explanation? Thank you.

  
  

• the swagbucks toolbar will not my computer uninstall in Control Panel of configuration/programs. How can I uninstall it?

  Tried to use the usually way to uninstall a program, but it will not respond. Also tried to restart the computer in safe mode.

  Hello

  see if google advice helps

  http://www.Google.com./search?hl=en&source=HP&BIW=1248&BiH=840&q=remove+swagbucks+toolbar&OQ=remove+swagbucks+toolbar&AQ=f&AQI=G2G-V1G-m2&aql=&gs_sm=e&gs_upl=1563l4203l0l8l6l0l0l0l0l406l1391l2-4.0.1

• Custom toolbar will not appear

  I created the toolbar class and classes below the tool bar button, but when I add an instance of the toolbar to a screen it will not appear.  I noticed that the painting of the ToolBarButtonFields methods are not called so.  So clearly I am missing something, advice?

  SerializableAttribute public class ToolBarField extends Manager
  {
  Vector leftJustifiedButtons = new Vector();
  Vector rightJustifiedButtons = new Vector();
  preferredHeight int = 40;
     
  public ToolBarField()
  {
  Super (Manager.NON_FOCUSABLE);
  this.setBackground (BackgroundFactory.createSolidBackground (Color.BLACK));
  }
     
  public int getPreferredHeight()
  {
  return preferredHeight;
  }

  ' Public Sub addButton (button ToolBarButtonField, rightJustified boolean)
  {
  Super.Add (Button);
         
  If (button.getPreferredHeight () > preferredHeight)
  preferredHeight = button.getPreferredHeight ();
         
  If (! rightJustified)
  {
  leftJustifiedButtons.addElement (button);
  }
  on the other
  {
  rightJustifiedButtons.addElement (button);
  }
  }
     
  public int getPreferredWidth()
  {
  East int = Display.getOrientation ();
  If (Orient is Display.ORIENTATION_LANDSCAPE)
  {
  Return Display.getHeight ();
  }
  on the other
  {
  Return Display.getWidth ();
  }
  }
     
  protected void sublayout (int maxWidth, maxHeight int)
  {
  buttonHeight int = getPreferredHeight();
  buttonWidth int = 48;
  int button = rightJustifiedButtons.size () + leftJustifiedButtons.size ();
         
  If (buttons > 0)
  {
  buttonWidth = getPreferredWidth () / buttons;
  }
         
  Enumeration iter = rightJustifiedButtons.elements ();
  int curX = maxWidth;
         
  If (maxHeight > Display.getHeight ())
  maxHeight = Display.getHeight ();
         
  int y = maxHeight - this.getPreferredHeight ();
         
  While (iter.hasMoreElements ())
  {
  Button for a field (Field) = iter.nextElement ();
  this.layoutChild (button, buttonWidth, buttonHeight);
             
  curX = curX - button.getWidth ();
  this.setPositionChild (button, curX, y);
             
  }
         
  ITER = leftJustifiedButtons.elements ();
  curX = 0;
         
  While (iter.hasMoreElements ())
  {
  Button for a field (Field) = iter.nextElement ();
  this.layoutChild (button, buttonWidth, buttonHeight);
                         
  this.setPositionChild (button, curX, y);
  curX = curX + button.getWidth ();
  }
  }
  }

  SerializableAttribute public class ToolBarButtonField extends ImageButtonField
  {
  private static final int WIDTH = 48;
  private static final int HEIGHT = 36;
  int prefWidth = WIDTH;
  int prefHeight = HEIGHT;
     
  public ToolBarButtonField (Bitmap focusImage, unFocusImage Bitmap)
  {
  Super (focusImage, unFocusImage, Field.HIGHLIGHT_FOCUS |) ButtonField.CONSUME_CLICK);
         
  If (focusImage.getWidth)<>
  prefWidth = focusImage.getWidth ();
         
  If (focusImage.getHeight)< height)="">
  prefHeight = focusImage.getHeight ();
  }

  public int getPreferredHeight()
  {
  Return prefHeight;
  }

  public int getPreferredWidth()
  {
  Return prefWidth;
  }
  }

  SerializableAttribute public class ImageButtonField extends field
  {
  private Bitmap currentImage;
  focusedImage private bitmap;
  unFocusedImage private bitmap;

  ImageButtonField (Bitmap, Bitmap unFocusImage, long style focusImage)
  {
  Super (style);
         
  this.focusedImage = focusImage;
  this.unFocusedImage = unFocusImage;
  currentImage = focusedImage;
  }
     
  public int getPreferredHeight()
  {
  Return currentImage.getHeight () + 4;
  }

  public int getPreferredWidth()
  {
  Return currentImage.getWidth () + 4;
  }
     
  protected void onFocus (int direction)
  {
  currentImage = focusedImage;
  Invalidate();
  }

  protected void onUnfocus()
  {
  currentImage = unFocusedImage;
  Invalidate();
  }
     
  protected void drawFocus (graphics graphics, boolean on)
  {
  Do nothing
  }
     
  protected void layout (int width, int height)
  {
  setExtent (Math.min (width, getPreferredWidth()),
  Math.min (height, getPreferredHeight()));
  }

  protected void paint (Graphics graphics)
  {
  graphics.setColor (Color.BLACK);
  graphics.fillRect (0, 0, getWidth(), getHeight());
  graphics.drawBitmap (0, 0, getWidth(), getHeight(), currentImage, 0, 0);
  }
         
  /**
  * Substituted so that the Dispatch of the event thread can catch this event
  * instead of having taken here...
  * @see net.rim.device.api.ui.Field #navigationClick (int, int)
  */
  protected boolean navigationClick (int status, int time)
  {
  fieldChangeNotify (1);
  Returns true;
  }
  }

  I assume that you add an instance of the ToolBarField Manager on your screen?

  This bit would have to debug both.  For example, to delete your sublayout, extend FlowManager, add a normal button and see if it appears.

• Windows Media Center will not show images

  My windows media game will not display images in the library.  They appear as being there but have no photo attached.   If I open them it says "cannot display the image.

  Videos seem to work very well.

  Help, please.

  Hi sjeri,

  If you want thumbnails to display in your library, you can do the following:

  1. click on the "Start" button, type options files and click on the link 'Options folders' that appears.

  2. when several tabs 'Folder Options' dialog box is displayed, click the "View" tab

  3 always check "show icons, never thumbnails" to disable the generation of thumbnails. Clear this check box to enable the generation of thumbnails.

  4. click 'OK' to close the dialog box.

  Please check if you get a symbol of locking for images icons in windows Explorer.

  You can also visit the link below:

  Change the thumbnail size details and file

  http://Windows.Microsoft.com/en-us/Windows7/change-thumbnail-size-and-file-details

  Hope this information is useful.

  Please let us know if you need further assistance.

  Concerning

  Rehman - Microsoft Support

• Smartphones from blackBerry Desktop Manager will not show that I am connected

  My "BOLD" will connect to my Vista computer via a USB port. I can copy files if I do it myself. Blackberry Device Manager shows that I am connected to my computer. The Desktop Manager program does not show that I am connected. It says I am disconnected. I am the administrator of the computer. I loaded the program using the option "Run as Administrator" enabled. It's very frustrating! Please help me.

  Thank you

  I got it! I had installed the program Microsoft parental control on my computer and things seem to start down. I uninstalled the program, and everything seems to be working again!