Boot order does not

Similar Questions

• HP ENVY 17-n013na: the Legacy BIOS boot option does not work

  Support dear HP team,

  I recently bought for laptop HP ENVY 17-n013na .  It came with Windows 8.1. I have to install Windows 7. Unfortunately, the legacy in BIOS boot option does not work for me. Here is detailed information:

  BIOS version: F.04 Rev 5.0

  I tried updating to the latest version of the BIOS on the Support site.

  To activate the option to boot legacy, I followed the following steps:

  • Entered, BIOS configuration utility
  • Go to the System Configuration
  • > Boot options
  • Changed the setting to the Legacy Support on " Enabled"
  • F10 - save changes & exit

  Now, after the restart, if I go once more, configuration of the BIOS Legacy Support is set to disabled. Whenever I have change to active BIOS, Save & Exit, it is up to the people with reduced mobility. Because of that I can't run the installer of Windows 7 DVD.

  Please provide any help & suggestions.

  Thank you.

  Kind regards

  Eugene

  I managed to pass in Legacy mode as follows: http://www.eightforums.com/tutorials/13326-downgrade-windows-8-windows-7-a.html

  Reset the BIOS helped: https://www.youtube.com/watch?v=6KUyZIJ0xOc

  Can close the topic now.

  Thank you.

• How can I re-download Acrobat? I have my serial number but the order does not come under the heading upward my story.

  How can I re-download Acrobat. I have my serial number but the order does not come under the heading upward my story.

  Hi Roger,

  You can download Acrobat from the below mentioned link:

  Download Adobe Acrobat products. Standard, Pro | DC, XI, X

  Kind regards

  Rahul

• Qosmio X 870-Linux Boot CD does not work

  I disabled safety boot in BIOS and tried to boot from a Ultimate Boot CD and a MemTest86 bootable cd + and the two no longer starts. A Windows CD boot perfectly. Is there something that I am missing?

  They work on my other computers.

  Thank you
  Tristan

  Hello

  BIOS Qosmio X 870 does support UEFI / MSC mode?
  If Yes, switch from UEFI to MSC mode as described here:
  http://APS2.toshiba-tro.de/KB0/TSB2B03F30002R01.htm

  If it still does not work, I recommend you to check the created discs since these two options must be changed in order to boot from other sources.

• Pavilion g6 2307el: LEGACY BOOT SELECTION does not WORK

  Hi, first sorry for my bad English , I have a big problem...

  4 days ago, that I decided to install a new os on my pc (pavilion g6 2307el).

  I installed win 7 64 bit, and to do this, I enabled the legacy boot.

  now, I have some problems with some drivers and for this reason I want to change my os originally win 8 64-bit.

  I have the original cd of victory CV 8 (when I installed win 7 has deleted everything on my pc; recovery partition ecc..) but it does not work... Infact when the legacy box is turned on and I press the f9 key I see 2 option. boot to the efi file or boot from the hard drive (I can't see cd boot or boot usb or other) and when I put inherited boot off the system tell me that it isn't any os on my pc, and in this case when I Press f9 I don't see anything...

  Please, I want to return my windows 8...

  can someone help me?

  Hi @pavilion9512

  Thank you for your request! No worries for tyour not English, also long as understand us each other, that we are very well.

  I understand that a few days ago, you wanted to downgrade to Windows 7, but after doing if some drivers were not available.

  Now, you want to perform a recovery from the disk that you created but are unable to get the option to boot to the optical drive.

  Here is a link to HP Notebook PC - configuration of the Boot in the BIOS system order which will facilitate this process.

  Good luck!

• Pavilion 500 - 206t: Boot Manager does not appear in the sources of boot UEFI

  I had a working system, until I installed Fedora on it...

  I have since removed Fedora, but cannot get the windows partition to start for the life of me.

  In the bios, I don't see "Microsoft boot manager" in the list of Sources of boot UEFI in the boot order.

  I have the original, untouched windows 7 x 64 partition, the HP recovery partition and 10 windows partition, I recently did a clean install, but still no start.

  I've deleted and recreated a 100 MB EFI partiton and a partion of 128 MB msr by using diskpart.

  formatted fat32 EFI, left the msr as-is.

  C:\Windows\Boot\EFI\ files on the EFI partition in \EFI\Windows\Boot

  Creates the via bcdedit boot manager entries.

  I tried:

  1. Bootrec /fixboot
  2. Bootrec /fixmbr
  3. Bootrec /rebuildbcd

  I also used boot bcd with uefi function to copy the files on

  I used an installation disc USB win10 to the foregoing as a win7 disc does not have the USB drivers for the keyboard and the mouse.

  Am I missing something for the HP Pavilion?

  Thanks in advance

  Repair of windows did nothing.

  I created a ultimatebootcd USB drive (http://www.ultimatebootcd.com/) and used parted Magic/clonezilla in order to image the old windows and partitions of hp recovery (not the entire disk) to a USB external HDD (plugged into USB 2.0 port)

  Then I deleted all partitions with parted magc.

  Install win 7 on the system with no partitions, it's easier to reduce windows on partition of 100 MB, but you can adjust it later, also don't you bother with the product key, ignore her.

  Restart the ultimate boot CD, choose parted Magic then Partition editor and create an important partition for windows = or superior to what it was when he was photographed. If your new installation of win 7 took the entire disk, simply to reduce the size of the partition and create the large partition to restore to, don't forget the restoration of 15 GB HP as well. If you don't see all the partitions or get an error in the score editor, see this link: http://ubuntuforums.org/showthread.php?t=1619381

  don't worry about formatting new partitions.

  To restore, you will need to rename the image files on the external hard disk created in the second paragraph above. The partition names will be changed, see this link: http://drbl.org/faq/fine-print.php?path=./2_System/102_restore_image_to_different_partition.faq#102_restore_image_to_different_partition.faq

  After the restoration, start windows installation disk and repair, it will be your old windows partition, restored. Save and reboot the old partition. If everything is successful, you can delete the newly installed partition win 7 and use msconfig in windows to delete startup entries. You can use parted magic to cultivate the restored partition, if you wish.

  Then, install windows 10 to get a true EFI boot.

• Boot camp does not start windows 7 alley

  I have the following Setup: Windows 7, Mac OS X Lion 10.7.3 and Boot Camp.

  The only thing I did was Boot Camp Manager to select Mac Windows as boot drive (at the time there was only 1 icon visible in the window, not the 2 that you expect!) (1 for windows and 1 for OS X).

  After the start of Mac I can't get back into Windows more. Now the ALT/Option key does not work, I do not receive the start of disk icons, he begins just to Mac every time. Configuration screen/boot that Mac disks is also visible.

  But if I run the Boot Camp Assistant, it gives me the opportunity to remove from Windows 7, it seems that Windows 7 is here!

  Here is the output you'll probably ask, from the following commands:

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  diskutil list:

  / dev/disk0

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk0

  1: EFI 209,7 Mo disk0s1

  2: Apple_HFS Macintosh HD 250,6 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft data base 202,3 GB disk0s4

  Cs diskutil list:

  No logical volume group CoreStorage found

  sudo TPG - vv - r see the/dev/disk0

  See the TPG: / dev/disk0: mediasize = 1000204886016; SectorSize = 512; blocks = 1953525168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 1953525167

  start index size summary

  0           1                         MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 489531248 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  489940888 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  491210424 1067110728

  1558321152 395202560 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  1423 1953523712

  1953525135 32 table dry GPT

  1953525167 1 dry GPT header

  sudo fdisk/dev/disk0

  Drive: / dev/disk0

  geometry: 121601/255/63 [1953525168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639]

  2: AF 1023 254 63 - 1023 254 63 [409640-489531248] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [489940888-1269536]

  4: 0C 1023 254 63 - 1023 254 63 FAT32L Win95 [1558321152-395202560]

  I hope you can help me trouble Boot Camp and give me access to windows again!

  Kind regards

  Marijn

  Resize you your Windows partition?

  Can you use El Capitan has deleted my windows bootcamp partition as reference and download Testdisk and GPT Fdisk and run a scan of Testdisk and a quick search.

• Used to boot Windows - does not recognize the hard drive

  Hello. I had my computer laptop vostro dell for 5 years, and I've never had a problem. A few weeks ago, I was starting, and I got the blue screen of death. I had the same thing when I rebooted. I bought a SATA dock for recover my files, so I could format it and start from scratch. However, the dock does not detect my HARD drive, although I hear the disc running. I tried to connect a Dell Latitude docking station to transfer the files, but the Latitude does not recognize my HDD ether. Vostro runs XP Home Edition and Zorin OS, Latitude anime XP Pro. HHD in question is a 120 GB Western Digital Scorpio for drinking devices. Help, please.

  You boot from the disk and choose "Try without Unbuntu and change to your computer"?. Honestly, it looks that you have installed. In addition, using raid with Windows Xp support?

  If you have chosen to 'Try' Unbuntu I recommend now you run chkdsk /r from the recovery console. The problem is not with the hard drive probably, but with the file system.

  Download WIndows Xp Recovery Console from HERE. Save the file to your desktop. You will need to burn the iso image to a blank cd using the same way you did to the image ISO of Unbuntu ImgBurn. Although the instructions below refer to a Windows disk, the disk from the Recovery Console that you create will do the same.

  1. Insert the Windows XP CD in your CD-ROM drive and restart your computer. If you are prompted, select any options needed to start (boot) on the CD.
    
  2. when the text portion of Setup begins, follow the prompts. Select the repair or recovery option by pressing R.
    
  3. If you have a dual-boot or multiboot system, select the installation that you want to access from the Recovery Console.
    
  4. When you are prompted, type the administrator password. If you have not set a password for the account admin simply press on enter
    
  5. at the command prompt, type chkdsk/r > press ENTER. (Note: there is a space between the slash and the letter k).
    
  6. at the end of the output of scan type > press ENTER.
    
  7 restart your computer.

• ISO burned, boots, but does not end... MacBook Pro (early 2011)

  Downloaded the right firmware (thanks for the advice - the ID of the box compared to the system profile ID - they were different).  It burned on a CD, booted from it.   I must say here that my old internal DVD/CD is now external because I put a HD instead.  The boot goes to black screen, a text scrolls at top, then it goes to a command prompt flashes and sits there.  CD towers down and nothing heppens.  If there is a period of time between the first line and continued to give, I'll try again, but I felt that it was fine.  Don't want to go mucking around and make the SSD to become a paperweight, so I stopped for now until I hear back.  I don't think the fact that the SuperDrive is now external is originally the one, because it does not start.  I do, however, not press 'C' to start, I use the Option key to select the disc.  The disk is external now maybe isn't able to do (did not try).

  I have DSS take - the box it lists as a DHP, shows the system report: SanDisk SDSSDH2256G.  So I downloaded the H2 version.  I do not know how critical this update of the firmware is, if it's not I'll stop trying because he could end up in disaster if done wrong.

  Thanks for the tips.

  Tom

  IIRC external CDROM cannot be used. I would like to move the HARD disk to the CD/DVD drive do the update and then replace the HARD drive in

• Order does not appear on the account page

  I need to re - download a policy purchased in 2009. I have the order number, but it does not appear on my account page. How can I find?

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Re-partitioned Boot Camp does not not on VMware Fusion

  Hi, I had windows xp installed on boot camp and installed on vmware fusion, that worked well, but then I decided I wanted more memory and have vista instead. Installed on boot camp, but when I click on the partition boot camp on vmware fusion it still considers that I want the xp windows and says that the files have been move or restricted access or check for lack of files failed. Can anyone help, I tried to reinstall vmware, but the same result came out.

  Note: These senses are different which have already been posted so read and follow through... Note: These steps assume that you have a single Apple to default installation of Windows on a single Boot Camp partition and Boot Camp of VMware Fusion single default partition Machine virtual (without a snapshot *) and if you have changed the partition Boot Camp Virtual Machine to add additional hard disks to be virtual or RAW disk then do not use these instructions unless you backup the Boot Camp partition the Machine package virtual first. * Also note that Fusion 2.0.0 may accidentally have a snapshot with the virtual partition Boot Camp Machine and it should not have, then you should check to ensure that the condition does not exist as well. (With merger closed if the partition Boot Camp Virtual Machine package is over 1 MB in size, then you might have a snapshot in place and do not continue with these instructions.)

  ===

  1. If the merger is open, close it.

  2. in a Terminal (/ Applications/Utilities/Terminal) copy and paste command, as the following and then press Enter and it will delete the partition Boot Camp Virtual Machine of the metadata and the Virtual Machine to help.

  Note: This does not affect the Boot Camp partition install windows in that it does not remove it.  Also be sure you copy all the command line below, as well as, "RM" at the beginning of the ' (quote) after the s in the Machines. "

  RM - dfr "/Users/$ the specified item was not found./Library/Application Support/VMware Fusion/Virtual Machines/Helper/naos-1.0.vmwarevm/vmware.log ' ~/Desktop/Helper_vmware.log

• Tab order does not work on the image Panel and group tags

  I write code to control the tab on several tags such as "img", "Control Panel", "LinkButton",... and pie charts. When I run my program flash, tab indexing does not work. It works on the pie chart and "link button" tags, not on 'img', ' ', tags "group". I also tried to "activate the tab" on these fields and the true chilern tab, but no help.

  on the other hand when I disable the tab on the pie chart, and a link button, yet the tab is activated. It seems no matter what I do about the tab order, it does not reflect when I run my program.

  I really appreciate if someone could help me, I'm working with the sdk flex 4.1

  In Flex, components that receive focus must implement IFocusManagerComponent.  Most of the containers are not.

• Boot disk does not appear partition bootcamp

  I wanted to install windows 8.1 on my macbook pro running el capitan. Downloaded the windows support software and created a partition. My mac restarted, but did not start on the partition. The startup disk does not appear my bootcamp partition, but my disk utility. Help me

  Thank you

  If your Windows installation has not completed, you can still have a pending to be formatted FAT partition, and Windows must be installed. You can delete the partition by using the wizard of BC (only) and repeat the procedure to install Windows?

• Disabling or deleting a boot program does not work.

  I tried to remove windows live messenger from my startup programs which seems to be a million times.  the next time I start my computer, it does not start automatically, but the time thereafter, it starts automatically.  I tried to click on 'remove' and tried to 'turn off' but nothing works.

  http://www.Instructables.com/ID/how-to-stop-Windows-Live-Messenger-from-popping-up/

  http://www.mydigitallife.info/2009/12/11/how-to-disable-and-stop-Windows-Live-Messenger-from-loading-at-startup-automatically-auto-start/

  Read the above.

  You stop of in WLM himself.

  See you soon.

  Mick Murphy - Microsoft partner

• Print the order does not

  All of a sudden, when I try to print to one of a number of printers, nothing happens.  The printersw are all connected properly.  I tried to reload the drivers, but the weem bt problem both in the "print command" ideas?

  Go to start > administrative tools > Services > start (right click) as administrator > Windows print spooler service > restart

  If the print spooler service restarts and then try to print

  IF restarting the service spooler to print, but you are not able to print immediately, then try to reinstall your printers again

  IF the print spooler service does not stop and throws an error message, then enter "cmd" in the run box and type "sfc/scannow" and the system will give you error messages additional that you can use to troubleshoot your print spooler service error.