Bootcamp for repair after changing partitions in El Capitan

Similar Questions

• Bootcamp for repair after the partition

  Hello

  I've done research on how to repair the bootcamp partition, but it seems to be that everyone either has corrupted the partition is before El Capitan and the old disk utility or had more than 4 GPT. While on my own, I have 4 partitions and all my files are readable on osx

  When I boot in windows (select the startup disk Bootcamp) I am satisfied with the legendary "no boot device - insert boot disk and press any key".

  

  

  Is anyone able to find a reason why it is not booting?

  Assuming you have a Mac which is 2014 or more, and the version of Windows is W7/W8.1...

  A. we need to disable SIP.

  1. boot in local restoration (command-R).

  2. start utility-> Terminal.

  3. type csrutil disable in the Terminal, and then press enter/return.

  4. type csrutil State.

  5 start normally, then type csrutil status to confirm that all of the individual entries are still disabled.

  B. fix the Windows MBR Boot-ability entry. Please ignore the i386 MBR error message, but not others

  sudo fdisk e/dev/disk0

  p

  setpid 4

  07

  Pavilion 4

  p

  w

  There

  Restart and test.

• HP gives me no place to register for repair after checking a valid warranty

  I saw a res [response to a previous post, who posted a link to hp, but I've been everywhere in this site, and they refuse to give access to submit my laptop for repair

  It is an old g6 pav, but is still under warranty, and now they just cleared me like they don't want to hear about, but I want this fixed thing upwards. warranty expires in a month

  I tried all the support, detect etc products, it displays information of warranty very well, but doesn't give any options to support, which gives and is there a work around?

  Thank you

  If you live in the United States, contact HP info here.

• Why 2009 MacBook says "no hardware installed for wifi" after the update to El Capitan?

  I just updated today and after that he finished the wifi icon had the message "no hardware installed" I checked a few other places to see what I could do and I tried to reset the SMC two-way and the NVRAM and does not always help. I also tried to make the miracle of the network solution, but it doesn't even have a wifi network option. Please help, I need to use my laptop for school work on very bad Internet.

  A few things to try...

  http://osxdaily.com/2015/10/16/fix-Wi-Fi-problems-Mac-OS-x-El-Capitan/

• Merger of retina 21.5 "iMac does not Bootcamp for Windows 10 drivers / auto diagnosis repair

  Hi all

  Hoping someone has encountered this before. We have a 15 Apple 21.5 "iMac with a 1 TB fusion drive that must have bootcamp for a classroom environment. I am trying to build at least one of them. Here's the context:

  1 El Capitan for Mac environment

  2. Windows 10 (education)

  3 21.5 "Retuna iMac with 1 TB disk fusion (16 GB of RAM)

  Question: Windows 10 starts in "diagnostic auto repair", after that the bootcamp drivers are loaded. The iMac restarts in Windows 10, but forced to do a "restore" which throws pilots bootcamp (version 6)

  I try to reinstall 6 new bootcamp drivers (I managed to copy it to a Flash DRIVE via the OSXReserve Partition) but the same problem occurs.

  Any suggestions? My thought was to upgrade to Windows 7, use this version of bootcamp, Windows 10 upgrade together but alas, the iMac of retina does not support Windows 7. I have to get an ISO of Windows 8.1 and I hope this can work...

  Stuck in bootcamp *.

  W10 forced updates seem to be your culprit.

  Please see

  Windows 10 crashing, but don't know why.

  http://www.MakeUseOf.com/tag/take-back-control-driver-updates-Windows-10/

• Win 7-64 not start after change of motherboard. Win 7-64 has tried to repair without success. Message is

  Win 7-64 not start after change of motherboard.   Win 7-64 has tried to repair without success Message of Win7 installed "Cannot automatically repair the start" Message from the repair option DVD Win7-64 install is "this version of the Recovery Options is not compatible with this version of Windows".

  If Win 7-64 don't update the hardware changes and this prevents the start.

  Is there a solution for this problem of resettlement and thus destroy all previous program files and configurations?

  Hello

  As you mentioned that you have "hard disk 500 GB (previously there were two HD in the old mobo)" which means the HD is also changed

  Then I suggest to clean install to solve this problem, please follow the link to clean, install the windows

  http://Windows.Microsoft.com/en-us/Windows/installing-reinstalling-Windows#1TC=Windows-7

  Note: data loss caveat:

  Converting a hard disk partition or volume from NTFS to FAT32 requires that you reformat the partition, which deletes all the data on this subject. Be sure to back up data that you want to keep before you begin.

  Thank you

  Er.Mayank Chadha

  Thanks for your response

  I solved this problem in BIOS Advanced\SATA config\SB SATA config.  as follows

  SATA port 1-4 = AHCI initially

  SATA port 1-4 = new IDE

  SATA port 5-6 = IDE these ports used with DVD, a comic book should be like ports 1-4

  This because I've done a typical mistake of mine.   I did not save the configuration with the entry of FDI

  Good bye

  Huemul

• Spectrum XT by clicking on disk! Drop the WiFi! After you send it for repair 4 times! Why me!

  What should I do to get a laptop HP to work for my money?

  Initially, I bought a desire that I sent to get repaired 3 times because of the problems are not fixed.

  Was sent then a spectrum XT 5010nr as a replacement unit.

  Worked like a charm, until what it has not started at a black screen.

  After countless hours talking on the phone with abroad that support a no. IDEA how DO I USE WINDOWS and even less how to help me fix my laptop, I sent it for repair and it came back working again.

  BUT NOW he has a hard drive that is constantly clicking and making noise even when I'm not doing anything on the laptop and a WiFi that keeps giving up the connection or making 'limited' while Macs on THE SAME NETWORK on the same network and Android devices HAVE THAT ISSUE.

  Not wanting to not spend another 72 hours of my life, losing time with support 'concierge' of the India following a script no matter what you tell them and can "certainly help you with that" up until 3 hours later, they admit that they have no idea of what they are doing, I have researched and done everything I could changed every setting in Power Options, reinstalled Windows 8, and problems still persist.

  I would try to sell the unit, but I feel hurt hurt someone with a laptop of shit.

  Is HP, possible on this beautiful soft Earth I can get a perfectly portable work on you for the money I spent to buy it in the first place? I love the design of the spectrum but if he cannot hold a * beep * WiFi and if I live in constant fear of drive failure hard (because of the ominous clicking), it is not worth!

  I have forwarded your message to the right people for their review. You should hear from someone bit via private Message on this forum.

• HARD does not work after changing the disk partitions recovery media creator

  Hello world

  After installing windoows 8.1 April major upgrade (win 8.1 presents as OEM), and have shrunk C partition to create a data partition "D", "Troubleshooting" option under advanced start menu is no longer available.

  Toshiba Recovery Media Creator does not work, too (it can not find any hard disk recovery partion).
  I got in the OEM recovery partition.
  I am also able to create a recovery using the Windows tool unit.
  You have no idea about it?

  Thank you very much!

  Hello

  Sorry to hear about all this. Unfortunately, you now have a big problem. I don't understand why you didn't create support of recovery before you started to change the factory settings, including to change the structure of the partitions of HARD drive.

  Mobile offered with factory settings a structure specific partitions and recovery recorded image is saved on the partition of drive specific and marked with invisible markers. These markers are visible for preinstalled Toshiba recovery media creator tool and when you start the tool can find points of reference and has full access to specific files.

  Unfortunately, after changing the original scores structure Toshiba tool cannot find these markers more and is not able to copy files from recovery media recovery. What you need now is the original recovery disk. Using this disk, you can install original recovery image and after doing this, you will have new factory settings.

  I know it sounds stupid now but you must order the original recovery disk and it can be done on https://backupmedia.toshiba.eu/landing.aspx

  If you have any other questions you are welcome.

• Re: Satelite C850-B516: copy data drive HARD recovery after changing the partitions

  Hello

  Forum need help once again

  I split single partition came with my laptop to have data in a separate partition. I wasn't aware that it will affect. I have not created any backup CD. No, when I run HARD drive recovery media creator I get error "NO HDD Recovery Area.

  I can see a healthy partition of 10 GB on my drive and disk partitioning tools are evidence of the data in it.

  I copied to the Active primary partition of USB. But when I boot from USB, he leaves everything recover.

  It comes

  Can I recover my system to factory default using the recovery data copied?

  Concerning
  Ahmed

  Toshiba Satelite C850-B516

  # Problem, it is that your recovery image is useless now. When you want to use the external device for installation of recovery image is must be created as device start and it can be done if you use the preinstalled recovery media creator.

  Recovery image is saved on the HARD drive and fixed with the so-called markers. Recovery media creator can find these markers and start using the recovery saved on the HARD disk image. After changing structure of HARD disk partitions these markers disappeared and this is the reason why you see this error message.

  I'm afraid you must order now new recovery m FRO Toshiba drive and you can do it on - https://backupmedia.toshiba.eu/landing.aspx

• No boot device after changing the partitions

  Hi all. I've lost the ability to start in my Windows partition through bootcamp. When I use startup disk system prefs. OSX, he can see Bootcamp, but rebooting produces an error message "no boot device." If I hold the alt key while rebooting, I can only see the Macintosh HD, without bootcamp (or recovery, by the way). I can see the Bootcamp drive on the desktop, so I can use Parallels to run Windows based on this drive, I know that the drive itself is ok.

  I did a fair bit of mucking partitions. I decreased my Macintosh HD partition and inserted a new Macintosh HD and Bootcamp. Then, things are funky, and I created a volume of CoreStorage on top of Macintosh HD and it is associated with a partition on an SD card (created a fusion DIY with a TarDiskreader). All this worked fine and I now had a huge hard drive Macintosh and boots fine Mac, Parallels works fine, but I can't start natively in Bootcamp.

  Can someone help, please?

  Here is the output of "distill the list:

  /dev/disk0 (internal, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:      GUID_partition_scheme                        *500.3 GB   disk0
     1:                        EFI EFI                     209.7 MB   disk0s1
     2:          Apple_CoreStorage Macintosh HD            279.8 GB   disk0s2
     3:                 Apple_Boot Boot OS X               134.2 MB   disk0s3
     4:                  Apple_HFS Untitled                20.5 GB    disk0s4
     5:       Microsoft Basic Data BOOTCAMP                199.4 GB   disk0s5
  /dev/disk1 (internal, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:      GUID_partition_scheme                        *255.9 GB   disk1
     1:                        EFI EFI                     209.7 MB   disk1s1
     2:                  Apple_HFS TarDiskFirst            309.0 MB   disk1s2
     3:          Apple_CoreStorage Macintosh HD            199.8 GB   disk1s3
     4:                 Apple_Boot Boot OS X               134.2 MB   disk1s4
     5:                  Apple_HFS WinData                 55.2 GB    disk1s5
  /dev/disk2 (internal, virtual):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:                  Apple_HFS Macintosh HD           +479.0 GB   disk2
                                   Logical Volume on disk0s2, disk1s3
                                   663FCC6B-F913-4137-B61C-9A318FF32328
                                   Unencrypted
  

  And 'sudo disk/dev/disk0:

  GPT fdisk (gdisk) version 1.0.1
  
  Warning: Devices opened with shared lock will not have their
  partition table automatically reloaded!
  NOTE: Write test failed with error number 1. It will be impossible to save
  changes to this disk's partition table!
  You may need to deactivate System Integrity Protection to use this program. See
  https://www.quora.com/How-do-I-turn-off-the-rootless-in-OS-X-El-Capitan-10-11
  for more information.
  
  Partition table scan:
    MBR: protective
    BSD: not present
    APM: not present
    GPT: present
  
  Found valid GPT with protective MBR; using GPT.
  
  Command (? for help): p
  Disk /dev/disk0: 977105060 sectors, 465.9 GiB
  Logical sector size: 512 bytes
  Disk identifier (GUID): 918541C4-E232-154C-BC98-413BDA1DBBCC
  Partition table holds up to 128 entries
  First usable sector is 34, last usable sector is 977105026
  Partitions will be aligned on 8-sector boundaries
  Total free space is 262288 sectors (128.1 MiB)
  
  Number  Start (sector)    End (sector)  Size       Code  Name
     1              40          409639   200.0 MiB   EF00  EFI System Partition
     2          409640       546975591   260.6 GiB   AF05  Macintosh HD
     3       546975592       547237735   128.0 MiB   AB00  Booter
     4       547237736       587356159   19.1 GiB    AF00  Untitled
     5       587618304       977104888   185.7 GiB   0700
  

• Cannot connect to the FaceTime for Mac after repair by Apple

  A new logic Board had recently introduced in the Macbook Pro. Had some problems during registration to iCloud on Mac after changing my password on the iPhone while it was in the shop. Sign the most questions about the apple software have been resolved after a reboot. Seems FaceTime and GamesCentre are still some questions however:

  FaceTime connection error message:

  "An error occurred during activation"

  Tried to reset the NVRAM, who was in another post does not. I am running the latest OS X El Capitan 10.11.05. My apple ID is correct and the password.

  Any help much appreciated.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Mail does not ask for new password after change

  I had to change the password for my email account based on Yahoo (sbcglobal dot) net because the hack/spam. It's the second time in 6 months, and I'm having the same problem that took place the last time. After changing the password through webmail interface for the account and which confirms that change has gone through by a disconnection and return again on webmail with the new password, I estimated that the Mail on my MacBook Air (OSX 10.11.4) app so the Mail on my 5 c iPhone iOS app are still happier never to communicate with Yahoo Server , sending and receiving mail, despite never forces me to put the new password.

  This is obviously less annoying than the problem where Mail asks password constantly, it should not all too obviously work in this way. If one of these devices were lost or stolen, I know now that I could not get this email account by changing the password. Apple support tell me that deleting and then reinstalling the account in Mail should solve this problem, but *? I won't be able to do if a device is never lost/stolen. Something is clearly abnormal in the way Mail communicates with this Yahoo Server and Apple needs to fix this on their end!

  OK, I'm a monumental fool, apparently, but so are at least half a dozen Apple Support "geniuses."

  I have iCloud active keychain. Therefore, this behavior is expected. Keychain passes the new password information to both the MacBook and the iPhone instantly after that I changed it on the MacBook via the webmail interface. No Mail app should ask for the password, because they already have through keychain.

  So I feel very stupid, but then again I am not a geek, and I'm not paid to know these things. What is their excuse? Why zero agents Support of Apple knew it was happening, or think to ask about it? Why was their first step to remove, then reconnect the account, which took me less than an hour from the last time I did, apparently unnecessarily? Honestly, one wonders if anyone knows how to do their job more.

  / end of rant

• Generation of recovery media after changing Windows 8 for Windows 8.1

  How can I create new media recovery on the 8.1 of Windows after changing Windows 8? HP support says that only 1 set of recovery media is allowed. My original game is to Windows 8. You want to avoid having to go through the lengthy procedure of update in case I need to go through the process of recovery with my original support recovery.

  Hi @john_f_g ,

  Thank you for visiting the Forums HP's Support and welcome. I looked into your problem on your HP laptop and needing to make a new copy of Windows 8.1.

  Software recovery of HP and Microsoft allows you to make only a backup recovery.

  You can order new media disc or USB flash device of here.

  Thank you.

• After changing Windows 8.1 for Windows 10 my photoshop 6 is not working properly: layers styles cannot be applied to the objects in the layer

  After changing Windows 8.1 for Windows 10 my photoshop 6 working properly: layer styles can be applied to the object in the layer.

  Thanks much for the reply, thank you very much more useful.

  The letter appears to be part of the layer - not an object separate pixelated. One thing you could do is make a layer duplicated, select the letter and make a layer of the mask. Then you could add a style to the copy, and the rest of the initial layer will be hidden.

• Weak signal after changing for Z3

  Hello

  I noticed that my signal to the SIM 2 location is low after changing to the Z3. My previous phone was fine.

  Can you advise if there are parameters that I can do?

  Thank you

  Macrox

  You should try to contact the Support of Sony Xperia.
  http://support.sonymobile.com/global-en/contactus/