Box after checking several boxes

Similar Questions

• problem with power switch only works a 'cold' start after pushing several times.

  Original title: power switch problem

  The power switch on my computer doesn't work as a 'cold' start after pushing several times.
  Could I have accidentally re-set one "true or false? spend in the registry while trying to solve another problem?
  Dave

  Hello

  Looks like that the power switch has developed a problem, probably about to fail.

  Whatever settings are they should be consistent and not need to several tests.

  Check with a real computer store (the one that makes its own internal and no service
  leeks and glances at a Best Buy or other stores) or system manufacturer support
  (for systems custom Integrator system and the manufacturer in the case of construction of House).

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• My MacBookPro after that several attempts is NOT far form 10.11.5 El Capitan to 10.11.6, suggestions?

  My MacBookPro after that several attempts is NOT far form 10.11.5 El Capitan to 10.11.6, suggestions?

  Download the Combo update and apply it.

  Download update of OS X El Capitan 10.11.6 Combo

• Well, after spending several hours of research and not coming up with solutions, I'm finally back to get "out there". My problems with iMovie 09-1 - import a picture in iPhoto 9.6.1 in an existing project in very small. All the appe

  Well, after spending several hours of research and not coming up with solutions, I'm finally back to get "out there". My problems with iMovie 09-

  1. import a picture in iPhoto 9.6.1 in an existing project in very small. Everything seems OK, picture looks that it imported, 4S etc but in fact there nothing there except a black screen, long 4 seconds. I tried all the suggestions in a dozen of discussions but nothing works.

  2 - by sliding the cursor (pointer) on clips in the project or the event of the flip backwards and return to normal once the cursor is removed. Clips of transfer of events to the project smoothly and are right side up.

  What can be done on the transfer of photos and clips reversal?

  Are you running at El Capitan?   He does not play well with versions of iMovie earlier than version 10.

  (Even in 10.1 some pictures with some computers may show a black in the viewer screen, although in this case there are solutions.)

  Geoff.

• How can I get rid of a redirect virus. It is not DNS, I checked several times. I scanned my Mac with Malware bytes multiple times. He is yet to come. I am very confused. Help me!

  I'm on MacBook Pro (retina, 15 inch, mid-2015) how can I get rid of a redirect virus. I use Google Chrome. It is not DNS, I checked several times. I scanned my Mac with Malware bytes multiple times. He is yet to come. I am very confused. Help me!

  http://Syndication.ExoClick.com/splash.php?IDZone=1758202&type=8

  It's the kind of redirects that I get all the time

• Pavilion x 360: receive error 50397184 after trying several times to forgotten password

  Help, please. I forgot my password and now after trying several times I receive the message system disabled 50397184.

  CAL.

  Enter 45095100

• I get a message after downloading several apps: U44M1l200 there has been an error of installation of this update

  I get a message after downloading several apps: U44M1l200 there has been an error of installation of this update

  Please see this link:

  Error U44M1I210 | Install updates

  Hope this helps you.

  Concerning

  Megha Rawat

• I connect to outlook and put my email address and full security in when I disconnect and reconnect I must sign in everyntime even after checking the box to keep me connected?

  e-mail Outlook for windows 7does won't keep me signed in, I save my e-mail and security question to keep me signed in but after that I have close and open later he always wants me to re sign in? ... Joseph thanks, even after signing, constantly checking the box to keep me in...

  Hi Joseph,

  1. what browser do you use on your computer?

  2. is the specific question to Outlook.com or all web mail?

  I suggest you follow the steps described in the link if you are using Internet Explorer and let us know the State of the question below.

  Automatically fill in website forms and passwords:

  http://Windows.Microsoft.com/en-in/Windows7/fill-in-website-forms-and-passwords-automatically

  I hope this helps.

• Check several choices and limit box

  Hello

  I created a quiz on as3. This is the code I used for radioboxes:

  var quizscore = 0;  score. "" Text = quizscore + "";

  var group1:RadioButtonGroup = new RadioButtonGroup ("question1");

  A1. Group = a2.group = a3.group = a4.group is group1;.

  submit_btn.addEventListener (MouseEvent.CLICK, myquiz)

  myquiz function (event: MouseEvent): void {}

  If (group1.selection.label == "Correct answer") {quizscore += 10;}  nextFrame(); }

  else {nextFrame() ;}

  }

  A multiple choice question so I want to use the checkboxes. can I use the same type of method for checkboxes?

  That is to say. If the value of the selected box is 'this' and then add 10 points. This question has two answers; have I can limit how many checkboxes are checked before they reach submit it?

  can anyone help?

  Thanks much :))

  Since you use frames as the mechanism to change the quiz, the scripts on each image can mutate a little to treat each question easily.

  In each script of frames, you can decide what values are correct for this image and use the existing logic you use to determine if something is correct. Using the property selected box will tell you that are selected in order to compare that to the right answer, for example:

  If ((checkbox1.selected && checkbox2.selected && checkbox999.selected))

  {

  OK, what you want

  } else {}

  incorrect, do something else

  }

  There is on the other side as well, you usually want to check that some boxes are not checked (wrong answers), then just add! in front, for example: if (checkbox1.selected &! checkbox2.selected) {/ / 1 is selected, 2 is not}... If you have a few questions with 20 possible responses the strategy is not elegant then mention if you do.

  Limiting the number of checkboxes that can be archived is possible in a variety of ways. The simplest is telling the user how much can be verified, which allows them to check that a lot as they want and the submission of the response, check the number of responses is within your limits. It is not the best way, but it is easier. Literally just loop through boxes and County. If you name the answer with a number boxes (checkbox1, checkbox2,... checkbox99) you can even browse them in this way, for example:

  define a range of 1-3 answers

  function checkAnswers(e:MouseEvent):void

  {

  response range

  var minAnswers:int = 1;

  var maxAnswers:int = 3;

  detected number as selected

  var selectedAnswers = 0;

  total number of checkboxes for that matter (checkbox1, checbox2,... checkbox20)

  var totalCheckboxes:int = 5;

  for (var checkboxNumber:int = 1; checkboxNumber<= totalcheckboxes;="">

  {

  If (this ["checkbox" + checkboxNumber] .selected is true)

  {

  increment the selected answers

  selectedAnswers ++;

  }

  }

  a simple check because if it is in the range

  If (selectedAnswers > = minAnswers & selectedAnswers)<=>

  {

  number is located, continue

  }

  on the other

  {

  out of reach, warn the user on the number of responses

  }

  }

  When they click on which key you have you can have the Manager to do what he does and also to trigger this function...

  myButton.addEventListener (MouseEvent.CLICK, checkAnswers);

  There are ways much cleaner to do, but because the question is basic I give you just a simple way to manage the solution. If you are a lot more in the script and the reusability I can suggest other ways, but as they are less painful, they are more complicated.

• How "uncheck you" check box after checking in a PDF document? Help, please!

  Hello

  I can't find a way to 'uncheck' a checkbox I ' checked ' in a PDF document. Anyone know how I can uncheck? It is urgent.

  If it's really a checkbox then you just need to re - click on it. If it's an option button, if you can only non-select it by selecting a different button in the same group. To non - select the group entirely possible only by resetting, or the entire form.

• Boots Vista 64 Ultimate SP2 (with domain) to the mouse cursor black screen white after that several failure system restores

  Who can help me to WHO:

  Sorry for fast hiking, misspellings, it's late and I do not use my normal computer to this problem I have.

  I am currently sympthym to start the black screen with a white cursor (furniture, put in construction in the middle) with my laptop Dell Studio 15 (model 1537) that running Vista Ultimate 64 bit SP2.  He started tonight after repeatively, I tried to restore to a date prior to the System Restore tool.  I wanted to get back to Monday due to some software installations.  However, each attempt to restore failed and then after the 3rd or 4th attempt, when I tried to restart, I was faced with a window very long stop, and I was impacient and pressed and held the power button to stop it.  Subsequent starts, I've known this problem with no solution having been found for the moment.

  I tried several things at first, such that I tried Ctrl-alt-del, control-shift-esc, blindly connect with my fingerprint.  I tried windows key combos, but no luck.  Still stuck with screen black mouse cursor

  I have my vista ultimate 64 bit installation disc, and I started with the dvd and tried to fix it.  Automatic repair tool says he finds a problem with my start and had a difficulty to which I applied and rebooted.  But it did not work.

  Then, I tried to boot from the dvd again and did the repair option again, this time, Autostart reparir tool see nothing wrong with my start and I tried a system restore, but alas, it failed after having worked for a bit.  Telling something about restoration being corrupted.  I tried command prompt (X:\Source) and make chkdsk c: /p (which btw, implies / f as well) and it found some errors and repaired them or what not was wrong to write to newspapers, even if and then after long waiting, returns to the c: prompt.  No effect.

  On subsquent dvd boots, I tried the option to command line renaming a "Logs" directory and create a directory "Logs" empty (which was mentioned in some research online and even in a few posts here), but that has not solved the problem for me either.

  Dvd later boots, I have tried regedit solution method, where you will load a SYSTEM key and set some sort of AUTHORITY NT set... but when I checked key, she was already the correct setting.

  Then I learned that I could press the "Shift" key repeatedly while mode cursor screen black/white/and try the propmpt for keys pop-up to sticky.  But he said no 'link' as many instructions in this message box.  When I click 'Yes' to sticky keys, nothing is displayed and the pop-up closes.  Ditto for the 'no '.  There is no mention of accessibility settings.

  I tried all modes of security, but just a white cursor plu experience.  I have tried to use "last known configuration', 'debug mode', 'start logging mode', mode"disable driver signing"and again, the same thing, the cursor of the black and white screen.  I'm really at my wit's end, and I don't want REALLY to re - install everything (operating system, programs, settings, etc.) ... I did not back upward, and I use this machine without problem for more than a year.

  I remember once XP has a "repair install" mode which was really obvious to end users, since it looked almost identical to a clean install.  I have also heard (but can't really confirm) Vista has no such a fashion, that, by clicking on install, he repaired to the simular OS to XP disks how would repair their facilities.  I can't risk my data/programs/settings for accidental clean installation.  Help, please!

  Sincerely,
  Robert Eckman

  According to me, put it back in place, is the only solution to your problem!

• How to insert a line checked several

  Hi friends,
  
  IM facing a scenario. Let me explain.
  
  I have a page with a report and a button (these two in a homepage).
  
  I have a tabular presentation based on a table that opens in a pop-up window by pressing a button located on the home page. In this sick in tabular form be select several lines and if I press Add button in the pop - up, then all the lines checked must insert in the table report located in the home page.
  
  How can I achieve this.
  
  Can someone help me with this problem.
  
  Brgds,
  Mini

  Mini,

  I've updated my example for you.

  There are several ways to accomplish what you're looking for, here are two options:
  1. make an ajax call on beforerefresh pop-up report.
  2 persists the values checked in a page element and use it instead of an array.

  In my example, I used the second option. Instead of using an item hidden, I used a text field you can see the selected values. Here are the changes I made:

  1. Add a new region and an article about her, I called my article "P33_SELECTED_WIDGETS".
  2. in the declarations of global variables in your definition of the page, add the following text:

      var pkArray = [];
  

  3. change the report query to refer to the element on the page and ensure that the State of the check box reflects the values that you have seaved in your page element.

  select
      SEQ,
      APEX_ITEM.CHECKBOX2(
        2,
        SEQ,
        'class="pk-selector" ' || SEQ_CHECK
      ) SEQ_CHECK,
      NAME,
      READY_DATE,
      COMMENTS
    from(
        select
            SEQ,
            case
               when instr(':' || :P33_SELECTED_WIDGETS || ':',
                          ':' || SEQ || ':') > 0 then
                   'checked="checked"'
               else ''
            end SEQ_CHECK,
            NAME,
            READY_DATE,
            COMMENTS
          from widgets_broken
  )
  

  4. create a dynamic action to manage the persistence the checked values.

  * Name: * bind_click_handler
  * Event: * after refresh
  * Type selection *: region
  * Region: *
  Real actions:
  * Seq *: 10
  * Fire on Page Load *: Yes
  * Execute JavaScript Code *:

  $('.pk-selector').bind('click',function(){
    $this = $(this);
    var checkVal = $this.val();
  
    if($this.prop("checked")){
      pkArray.push(checkVal); //save checked value
    }else{
      pkArray.splice( $.inArray(checkVal, pkArray), 1 ); //remove unchecked value
    }
    $s('P33_SELECTED_WIDGETS',pkArray.join(':')); //update page item with new values
  });
  

  Edit
  I left a decisive step. In your background report, ensure that this partial page refresh is enabled and P33_SELECTED_WIDGETS builds page elements to present the attribute.

  Finally, change the proceudure files add to refer to the page instead of globl table element.

  BEGIN
  
      insert into widgets(NAME,READY_DATE,COMMENTS)
      select name, ready_date, comments
        from widgets_broken
       where instr(':' || :P33_SELECTED_WIDGETS || ':', ':' || SEQ || ':') > 0;
  
      delete from widgets_broken
        where instr(':' || :P33_SELECTED_WIDGETS || ':', ':' || SEQ || ':') > 0;
  
      :P33_REC_CNT := SQL%ROWCOUNT;
  END;
  

  See you soon,.
  Janet Tyson

  Published by: Tyson Janet January 3, 2012 13:13

• How can I download a security update after that several unsuccessful attempts?

  I am told that I have to download a critical security update.  I tried several times (6 or 7) and each time I like the download failed.  How can I sucessfully download a security update for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x $86 KB2833941$?  I am running Windows XP.

  Uninstall the .NET Framework 1.1. Then download the .NET Framework Cleanup Tool
  In the drop-down list box, select 1.1 and clean.
  Reinstall .NET Framework 1.1
  Download and install. NET Framework 1.1 Service Pack 1
  Visit Windows Update or Microsoft Update and let it install the rest of the 1.1 updates, including KB2833941.

  Check if it is installed and report.

• Why does my table re - make after checking a checkbox without report?

  I have a layout jsff like this:
  
  [[Region with the form 'info'] ['product' not area of table] [region with table 'conditions']]
  
  I find that my table of conditions or re-rendering completely every time some specific controls are changed in the area of "info", for example checking a box or clicking on a calendar control (without picking up a date) in the area of information will cause the state table again, but change a text of entry in the region of information does not cause a new rendering.
  
  * I'm not aware of any reference to the user interface between the two regions, beyond the fact that they are all two contents on the same page. Specifically, I have a partialTrigger on the table, but it refers only to the other controls in its own region.
  * "new record" here means that, after making a few changes, my condition table will be redesigned with no line and a large size, then after a second or two drawn again with all these lines, designed for the actual number of lines. I don't know if it's the entire region, or only the table, redrawn.
  * All controls on the form 'info' have autoSubmit = true
  * The table 'products' is not visibly rerendered, it seems fine.
  
  Can someone point me to documentation describing which will cause a part of a page to be redrawn when the controls on other parts are changed, or technical to follow the rendering of debugging process?
  
  Thank you!
  
  Published by: Adam Aulick on March 22, 2012 14:21
  
  Published by: Adam Aulick on March 22, 2012 14:22

  Hello

  check the iterator binding in the PageDef file. If the iterator has its changeEventPolicy value 'ppr' then this is why the table updated.

  Frank

• Thunderbird crashed after checking the profile folder, now no accounts

  I was checking the troubleshooting to locate the Profiles to save folder. I clicked on "about plugins" to see if there was any plugins installed by default and TB crashed. It will not re-start until I rebooted the computer, and then at the launch he wanted to set up an account. The two previous accounts created had disappeared. I found file profiles and there are 2 folders with random numbers in the titles. I tried the command line profile manager and creates a new profile with the choice of the copied folder, I had. TB would not start. When I chose a subfolder under profiles he started and my 2 accounts were back with emails and folders that I created. I went to the resolution of problems again and clicked on the link and it happened again!

  Should I delete and reinstall TB again to be sure? What is the best way to save e-mail? I couldn't find where you would be important old mails from TB or Outlook. We have a backup of emails from our computer to work, we need to import on the laptop afterwards. I need to work it before install TB on our portable computer with an e-mail account with several old emails that must be maintained. We try to escape using the AOL Desktop application!

  https://support.Mozilla.org/en-us/KB/Mozilla-Crash-Reporter#w_viewing-crash-reports