Braces without a "declaration" of departure?

Similar Questions

• Restrict access VPN client on IOS 12.4

  I'm trying to restrict access to the client VPN ports for the specific customer VPN leading to a router in 1841 running IOS 12.4 (9).

  With versions of IOS of pre-12, 4 that this could be done by using the ACL on the outside, but with version 12.4, it seems that VPN connections are allowed even without a declaration of "permitted" in the external ACL (similar to "sysopt connection permit-ipsec" on the PIX).

  Is it possible to limit the VPN traffic on the external interface of the client?

  See you soon,.

  Christoph.

  Hello

  The feature you're looking for is called:

  Access check crypto on plaintext packets

  Check it out in the Configuration Guide for Cisco IOS, version 12.4 security

  In sort, set the encryption to your ACL post, go into your crypto-map and apply it with:

  set ip access-group {access-list-number | access-list-name} {in | out}

• EF6 and configuration implicitRefCursor

  Hello

  I use EF6, and stored procedures for insert/update / delete lines. I also need to get some results back to DB after insert or update. I tested the sliders and it seems to work as expected. But the problem is that Ref Cursors must be configured in the configuration files as in the example below. How can I make the same configuration in the code? I have not found any information that can help me. Reason why I could not use the configuration files is that users can have many bases of data, which are recorded by the user in the system, each registered database can also use different schemas. I also tried to update the configuration file when the new database is saved, but it seems that Oracle EF hiding these settings while the process is restarted not - I couldn't restart process, because it is web application.

        < implicitRefCursor >

          < storedProcedure schema="test" name="Table_U">

            < refCursor name='OUTREFCURSOR'>

              < bindInfo mode="Output" />

            </ refCursor >

          </ storedProcedure >

          < storedProcedure schema="test" name="Table_I">

            < refCursor name='OUTREFCURSOR'>

              < bindInfo mode="Output" />

            </ refCursor >

          </ storedProcedure >

        </ implicitRefCursor >

  With EF, you must declare that the result set metadata in a .NET configuration file. There is no way around that.

  If you don't use of EF, Oracle DB 12 c allows to return result sets implicit without metadata declared in the file config .NET, or in the application, except if you use Entity Framework, REF cursors that can be updated, or constraint metadata are required to be passed by the client.

• Load several stubborn taskflows independently on a page

  Hello

  I use Jdev 11.1.1.7.

  I have 3-4 taskflows on my demand jspx page.

  • All taskflows have the property to update the value if necessary.
  • All taskflows have the same input parameter. (single input param)
  • All taskflows must be updated when I change the value in the LOV in the same page.
  • All taskflows have a fragment (one), all fragemnts have only a single table. (nothing else)
  • The data in these tables come from webservices.

  As I put update as 'ifNeeded', the taskflows are automatically get updated on change of value without [completely declarative] code

  The problem is: it runs the tasklows and load all the data in all taskflows in the end (after completing all Web service calls)

  What I need: what first taskflow finished their execution, which must be charged.

  The pointers on this would be useful.

  Thank you

  Alisson

  Read http://www.ateam-oracle.com/improving-adf-page-rendering-time/ and try to implement this strategy.

  Timo

• ' Gets an attribute xsi: type with XMLType object relational storage.

  Hello
  
  
  How to recover the attribute xsi: type, when you use storage relational XMLType object.
  
  When you have for example a ProductOrder object type and one object type MoveOrder what a CustomerOrder extensions type how to recover if the CustomerOrder is a kind of MoveOrder or ProductOrder attribute:
  
  < ns2:customerOrder xsi: type = "ns3:UpcProductOrder" >
  
  
  I would use the XMLTable service in combination with the XPath rewrite.
  
  version of the database 11.2.0.2

  Thanks for the details.

  As I said in my first answer, the prefix xsi is predefined, don't try to redeclare him.

  I know that sounds strange and is in contradiction with what the manual, but it seems to work that way with the storage of GOLD.

  http://docs.Oracle.com/CD/E11882_01/AppDev.112/e23094/xdb_xquery.htm#CBAJBDFA

  You can use these prefixes in XQuery expressions without first declaring in the prologue of the XQuery expression. You can redefine any of them except xml in the prologue.

  If documentation bug or implementation bug? I do not know.

  In any case:

  SQL> BEGIN
    2    DBMS_XMLSCHEMA.registerSchema(
    3      SCHEMAURL => 'test_otn.xsd',
    4      SCHEMADOC => bfilename('TEST_DIR','test_otn.xsd'),
    5      CSID => nls_charset_id('AL32UTF8')
    6    );
    7  END;
    8  /
  
  PL/SQL procedure successfully completed
  
  SQL>
  SQL> insert into cust_order values (xmltype
    2  ('
    3  
    6  a
    7  b
    8  '));
  
  1 row inserted
  
  SQL>
  SQL> SELECT order_id
    2       , order_item
    3       , order_type
    4  FROM cust_order
    5     , XMLTABLE (
    6         XMLNamespaces ('http://bla.com' as "ns1")
    7       , '/ns1:customerOrder'
    8         passing object_value
    9         columns order_id   varchar2(20) path 'ns1:orderId'
   10               , order_item varchar2(20) path 'ns1:orderItem'
   11               , order_type varchar2(30) path '@xsi:type'
   12       ) ;
  
  ORDER_ID             ORDER_ITEM           ORDER_TYPE
  -------------------- -------------------- ------------------------------
  a                    b                    http://bla.com:ProductOrder
   
  

  And if you do want the local name:

  SQL> SELECT order_id
    2       , order_item
    3       , order_type
    4  FROM cust_order
    5     , XMLTABLE (
    6         XMLNamespaces ('http://bla.com' as "ns1")
    7       , '/ns1:customerOrder'
    8         passing object_value
    9         columns order_id   varchar2(20) path 'ns1:orderId'
   10               , order_item varchar2(20) path 'ns1:orderItem'
   11               , order_type varchar2(30) path 'local-name-from-QName(@xsi:type)'
   12       ) ;
  
  ORDER_ID             ORDER_ITEM           ORDER_TYPE
  -------------------- -------------------- ------------------------------
  a                    b                    ProductOrder
   
  

  Hope that helps.

• Types of markers for Prelude?

  What would be the way to add a marker type custom to the prelude, that could be used in addition to the default 6 marker (a subelement, comment, flash cue, weblink, chapter and speech)?

  I wish I had a possibility to add a set of properties with a specific clips starting time limit.  Looking at the CC Extension Builder and going through the documentation of the API of prelude, but have not yet found information on this.

  Through this forum, I understand that you can define a custom metadata schema, but that seems to allow new metadata for the entire clip, without the time of departure.   I also see that prelude provides a user interface to define patterns of marker, but it seems that models would be based on the existing marker types, so I can't add new property Set (s) there.

  Here!

  https://github.com/Adobe-CEP/samples/tree/master/htmlStandAlone

  To set up a development environment, I recommend Guide quick start (included in the sample of the body).

  https://github.com/Adobe-CEP/samples/BLOB/master/PProPanel/payloads/PPro_Panel_QuickStart _ Guide.pdf

  Work through the pdf file, play with htmlStandAlone and let me know if you have any questions. [b b b at adobe dot com]

• Migration of ASM of singlepath multipath disk

  Hello
  
  I need to migrate the unique path to the SAN disks to a multi-channel access mode.
  
  This is my environment:
  
  Oracle DB: 11 GR 2 Enterprise version (node 2 CARS)
  Operating system: Oracle Enterprise Linux 5
  DB file system: disk ASM with ASMLib
  
  disk: disk SAN
  Multipath software: EMC Powerpath
  single path names: / dev/sdb, / dev/sdc,... etc.
  Multipathing name would be: / dev/emcpowera, / dev/emcpowerb etc.
  
  Document different metalink and google, I came up with the following steps to migrate the singlepath multipath ASM disks:
  
  (* Perform the procedure on both nodes below)
  1. open the ASMLIB configuration file: / etc/sysconfig/oracleasm (backup this file at this stage)
  3. change the ORACLEASM_SCANORDER variable to provide the path of the prefix of the multichannel disc.
  For example:
  The multichannel disc would be that/dev/emcpowerb etc. (since we use emc powerpath), set the ORACLEASM_SCANORDER variable as follows:
  ORACLEASM_SCANORDER = "emcpower.
  4. change the ORACLEASM_SCANEXCLUDE variable to exclude simple disks (/ dev/sd *) of the scanning process.
  ORACLEASM_SCANEXCLUDE = "sd".
  5 restart both nodes.
  
  Are very well the steps above? Any additions / changes necessary? Please notify.
  Triggered an SR for this, but received no direct response.
  Also. I set the ASM_DISKSTRING parameter to a specific value for my ASM instance? It has the value null.
  
  Thank you.

  Hello

  No, in fact, that's all there is to it.
  Since you're using ASMLIB, records will be presented the same asm. There is no need to change the DISCOVERY_STRING.

  Only thing I'd personally (for testing purposes) is the following:

  1.) check before migrating that all disks are there (oracleasm listdisks), then
  2.) disable the autostart of the crs stack (crs to disable crsctl), you can test everything (including reboot) without going through the departure of clustarstack automatically.
  (3.) If after restarting the oracleasm listdisks sees all disks, you are well
  4.) enable crs (crsctl enable crs) again and start the clusterstack (crsctl start crs).

  Concerning

  Sebastian

• Problems with arguments, vector + AIR NativeProcess 'not supported'. &lt; String &gt;

  I want to create an AIR application that will execute a call from style of command line (extendedDesktop) on an .exe file with an argument that is passed to it.

  I followed the example of setting as shown on this page to reference Adobe. However, when I try to create a vector. < String > I get error "error #1007: instantiation attempted on a non-constructeur.»

  This occurs on the following line:

  var processArgs:Vector. < String > = new Vector ["< String >"] ();

  I also tried without the declaration of arguments and calling just the .exe without arguments, and I get the error "" the NativeProcess could not be started. "" Not supported in the current profile. "" I have several put supportedProfiles in place in my folder (including desktop computers and extendedDesktop) but don't know how to test and debug the file in Flash Builder with rights of extendedDesktop. "

  Hello

  In my opinion, Adobe docs aren't clear on the requirements of "NativeProcess" during the creation. All the articles/docs, you find via references to research that we need to ensure that this descriptor is modified, which includes:

  extendedDesktop

  for example; http://www.Adobe.com/devnet/air/Flex/articles/air_screenrecording.html

  While it seems to be necessary only for generation of deployment to ensure that the application is built in 'extended' profile that Active native installer and access to the native process.

  In any case running Flash Builder with integration of built-in adl should allows you to test in my opinion (as I never had to manually change the descriptor creation/trials).

  I suggest you to make sure that all things are built as planned and start the new thread on the creation of problems with Flash Builder and adl (as it seems that he is not running in the correct privileges - so you are not able to test/author some features). I assume that you use the administrator account on your machine (and Flash Builder has been installed and then run under the same account).

  (note: I'm on Mac)

  Kind regards
  Peter

• States of Application page

  Hello

  Here is my code

  <? XML version = "1.0" encoding = "utf-8"? >
  " < = xmlns:fx s:Application ' http://ns.Adobe.com/MXML/2009 " 
  xmlns:s = "library://ns.adobe.com/flex/spark".
  xmlns:MX = "library://ns.adobe.com/flex/mx".
  minWidth = "955".
  minHeight = "600".
  creationComplete = "comp ()" xmlns:ns = "library://ns.adobe.com/flashx/textLayout" > "
  
  < fx:Declarations >
  <! - Place non-visual elements (e.g., services, items of value) here - >
  < / fx:Declarations >
  
  < fx:Script >
  <! [CDATA]
  Import mx.collections.ArrayCollection;
  
  import rendering engines. PersonRenderer;
  [Bindable]
  public var userData:ArrayCollection = new ArrayCollection () collection
  [{'Pnom': 'Auto', 'index': '0'},]
  {'Pnom': 'Low', 'index': '1'},
  {"Pnom": "Medium", "index": "2"},
  {'Pnom': 'High', 'index': '3'}
  ]);
  
  private void comp (): void {}
  
  }
  []] >
  < / fx:Script >
  
  < s: states >
  < name s: State = "normal" / >
  < name s: State = "flat" / >
  < / s: states >
  
  <!-start your application by right-clicking within the class and select Debug > Application SWF-> FDT
  
  < mx:Canvas borderStyle = "solid" borderColor = "gray" backgroundColor = "black" width = "250" x = "76" y = "42" cornerRadius = "8" >
  < s:DataGroup dataProvider = red '{userData}"="0"width ="100% ">
  < s:itemRenderer >
  < fx:Component >
  < s:ItemRenderer >
  < mx:VBox width = "100%" cornerRadius = "8" verticalAlign = "middle" paddingTop = paddingBottom "5" = "0" height = "100%" >
  "< s:Label text =" {data.fname} "color.hovered =" #FF0000 "color.normal ="white"width = '100% '
  mouseChildren = "false" useHandCursor = "true" buttonMode = "true" paddingLeft = "10" click = "onClick (data)" paddingBottom = "0" / > "
  < mx:HRule strokeColor, strokeWidth = "#8C8C8C" = "1" width = "100%" includeInLayout = "{data.currentIndex! = userData.length-1}" "
  "visible =" {Data.index! = userData.length-1} "strokeColor.hovered =" white ".
  mouseChildren = "false" useHandCursor = "true" buttonMode = "true" click = "onClick (data)" / >
  < / mx:VBox >
  < / s:ItemRenderer >
  < / fx:Component >
  < / s:itemRenderer >
  < s:layout >
  < s:VerticalLayout verticalAlign = "middle" distance = "0" / >
  < / s:layout >
  < / s:DataGroup >
  < / mx:Canvas >
  
  < / s:Application >

  But it throws error Description State "hovered" has been referenced without being declared.

  which is wrong in it.

  Thank you

  Roman.

  It's because you're referencing within the ItemRenderer.

  The ItemRenderer is a separate and independent component, so you must declare the State also hovered within the ItemRenderer:

  Best regards

  Jorge

• Can you MAKE it more difficult?

  First of all - this is my first post and I know I break label ranting.  Sorry ' end that.

  A bit of history... first off I am a fool.  I work outside and certainly am not a web designer.  It's one of the reasons why I chose DW because of the intuitive interface.  I started with 4 DW at the time when it was Macromedia and upgraded to CS3 a few years ago.  I took a class in my community college to understand CSS and I was doing okay.  Apparently finished my license for CS3 and I thought about just go with one of the things that software open source, but agreed DW would be my option better (if it's more expensive).  This decision is considered to be one of my worst in the last months, or even years.

  It was 36 hours trying to get a simple, simple (and I mean simple) html page to index upward and running and it's still does not.  I can not yet understand how to center the header of the page (there was a button in the box 'properties' for this in CS3).  I bought $30,00 Warner Teach Yourself visually the book from B & N, YT watch tut vids but when they say 'base page', I am lost!

  Anyway, thanks for reading and I sorry for the mug shot, but I'm really frustrated (and tired).  If anyone knows a good basic for CS5 tutorial I can buy or if I should go with another software, or if anyone would be interested in helping understand me this out (I'll pay), I would appreciate it.

  PS - I'm ok with the site definition, etc.  I even played a bit with Spry drop down menu with some success.  I know basic html, but I'm not so good with css.   I just can't figure how to get the page base and centered.  Thanks again.

  Chris

  PPS - I read read the article on the FAQ page that starts by centering:

  It is very easy to Center a page with CSS. Simply wrap all of the content of the page in a < div > tag, give the < div > a unique ID, such as wrapper and create a CSS style.

  The CSS style should use the same name as the ID, preceded by a pound sign, for example, #wrapper.

  It should also have a declared width. No matter if the width is in pixels, ems or a percentage, but this technique will not work without a declared width.

  Finally, the style should set the left and right margins to auto.

  To manually code the CSS stylesheet, it should look like this:

  {#wrapper}

  width: 940px; / * set the width based on * /.

  margin: 0 auto;

  }

  Can I put the same "adjust to width according to" in the header tag?

  http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.DTD">".
  http://www.w3.org/1999/xhtml">
  
  
  
  
  

  
  
  

• Getters and Setters is not necessary?

  According to one training with Ben Forta videos, I can build a .cfc mapped my CF9 on a specific table with fields as follows:

  Component name: name of the Table BAA_SBJ.cfc: BAA_SBJ

  ----------------------------------------------------------------

  < cfproperty persistent = "true" >
  < name cfcomponent = column "SRC_SYS_NM" = "SRC_SYS_NM", datatype = "string" length = "50" / >
  < name cfcomponent = column "SRC_SYS_GUID" = "SRC_SYS_GUID", datatype = "string" length = "39" / >
  < name cfcomponent = column "OBJ_GUID" = "OBJ_GUID", datatype = "string" length = "39" / >

  < name cfcomponent = column "SBJ_NM" = "SBJ_NM", datatype = "string" length = "100" / >
  < name cfcomponent = column "SBJ_DOB" = "SBJ_DOB" datatype = "date" length = "10" / >
  < name cfcomponent = column "SBJ_ID" = "SBJ_ID", datatype = "string" length = "100" / >
  < name cfcomponent = "NOTE" column = 'NOTE' datatype = 'clob' length = "2147483" / >

  < cfcomponent name = the column "CDT" = "CDT" datatype = "date" length = "10" / >
  < cfcomponent name = "MC" column = "MC" datatype = "timestamp" length = "8" / >
  < name cfcomponent = "CBY" column = "CBY" datatype = "string" length = "25" / >
  < name cfcomponent = "MDT" column = "MDT" datatype = "date" length = "10" / >
  < name cfcomponent = "MTM" column = "MTM" datatype = "timestamp" length = "8" / >
  < name cfcomponent = "MBY" column = "MBY" datatype = "string" length = "25" / >
  < / cfproperty >
  -------------------------------------------------------------------

  Because the name of the component and the table name are the same, this mapping code will automatically create 'Getters and Setters' which means that I can, in an index.html page, use the following code without manually declare a function "GetSUB_NM", because CF9 does this for me automatically:

  < cfset data = EntityLoad ("BAA_SBJ_NM") >
  < = cfloop '1' to = "#ArrayLen (data) ' # ' index 'i' = >"
  < cfoutput >
  #data [i]. GetSBJ_NM() # < br >
  < / cfoutput >
  < / cfloop >

  -------------------------------------------------------------------

  -However, in the instructions http://www.Adobe.com/devnet/flex/articles/fcf_ataglance_flex_coldfusion.html   -------------

  It describes how to explicitly declare inserts updates and deletes functions.

  <cfcomponent>
    <cffunction name="getEmployees">
      <cfargument name="region" type="string" />
      <cfquery datasource="F4CF_FictitiousSalesPlanner" 
        name="qEmployees">
        SELECT FirstName, LastName, Email, Phone, Region
        FROM SalesTargets
        <cfif isDefined("arguments.region")>
          WHERE Region = '#arguments.region#'
        </cfif>
      </cfquery>
      <cfreturn qEmployees>
    </cffunction>
    <cffunction name="insertEmployee">
      ...
    </cffunction>
    <cffunction name="updateEmployees">
      ...
    </cffunction>
    <cffunction name="deleteEmployee">
      ...
    </cffunction>
  </cfcomponent>

  --------------------------------------------------------------------------------

  I read the outdated documents?  I was under the impression that if I use a FB4 project/component connected to a .cfc with a corresponding name of the table (but that is done, I don't know at this point), that CF9 would just understand on his own if there is a demand an insert, a delete or update.  Which is the correct way to more modern to connect, say a data grid, of a cfc to CF9?    Having to write insert(), update(), function delete() to each table in my database manually, seems redundant, as 100% of the time, I need the same functions on all the tables.

  Unless there is something 'new' in FB4 that I do not know, you cannot directly access the Coldfusion ORM functions

  to in actionscript as you cannot access or directly from actionscript, then you

  need remote access component of CF which has functions that call functions of the CF ORM like EntityLoad, EntitySave, etc.

  Answer a couple of your questions with this premise:

  1. your FB4 "object of value" would connect to your coldfusion 'entity' cfc.

  2 getters/Setters are created automatically in your entity of cfc, you can ensure

  This setting parameters, i.e. the accessor = "true" in your component of the entity.

  3. you can set the parameter 'table' in your component of the entity, or you can leave

  out if the name of your entity corresponds to the table you can leave, just like you can leave out

  the column names if your properties match the DB fields that did yours.

  4. the remote component which calls FB4 should have functions that

  accept valuable FB4 for saves and deletes, and these functions call the correct entity function,

  That is to say, EntitySave, EntityDelete or EntityLoad with filter settings.

  6. your remote component functions do not need to have statements, access DB is managed

  by the Coldfusion ORM functions such as you have in your CFML example.

  Thus the functions of your remote control would look like 'something' this...

• dynamic text color

  I am trying to use an xml document to dynamically load the color of the text in my film and I can get the color, but when I try to use this value to change the color of the text, it does nothing, how can I get this to work?
  
  Thank you
  
  This is my code:
  
  

  There are two problems here I think.
  1. get the correct value.
  var txtColor:Number = XPathAPI.selectSingleNode (this.firstChild, path + "/ textColor / *");

  This probably gives you a correct path (if the xpath expression is correct for what you want to do), but the track is misleading.
  trace applies to the toString method to its arguments (I think). And by putting the: number is not a number, the compiler treats just like one.

  What you actually have is the following:
  var txtColor:XMLNode = XPathAPI.selectSingleNode (this.firstChild, path + "/ textColor / *");

  What if
  trace (txtColor.NodeType)
  Watch "3" then you have a node that contains the value you want.

  So, try this:
  var txtColor:Number = number ((XPathAPI.selectSingleNode (this.firstChild, path+"/textColor/*").nodeValue);

  This * should * you get the value you need.

  2. assignment of the value

  If the works above, then assign the number must be very well... but just to clarify other points...
  Regardless of if its flash 8 or flash CS3 compiler will give an error with the assignment of the string textColor property of a textfield if your textfield has been declared as a TextField.

  For example
  It does not work:
  var testtext:TextField;
  testtext.textColor = '0xff00ff ';

  But it works without a declaration:

  testtext.textColor = '0xff00ff ';

  If you get this error, then you must use Number (stringValue) and it will work.

• Problem in the code for the adjustment of the length of the column

  I have a column of the item on the stores of the order of the day that this column must be 9 digits
  I'm labour code and examine the field if found 8 figures put zero on the left
  But this code does not work as I want it, although the implementation was done without errors
  
  DECLARE
  V_ITEM INVENTORIES. TYPE % INV_ITEM;
  START FOR ITEM_CUR IN (SELECT * FROM INVENTORIES) LOOP
  IF length (V_ITEM) = 8 then
  UPDATE OF INVENTORIES SET INV_ITEM = 0 | V_ITEM;
  END IF;
  END LOOP;
  END;

  Dear OracleLover2,

  All columns have the same data because there is no where clause in the update statement and that's why it would update all records.

  I don't know what should be the condition for the update, because this is business logic, which you need to know.

  There was the fundamental problem in the code that I pointed out above in my last comment.

  You write once appropriate where clause in your query of update, it will give you the desired results.

  It will be useful.

  Check the answer as useful / OK, if this can help you

  Carole

• HTP.p (&lt; pre &gt;) and the vertical scroll bar

  Greetings,
  
  Carl has used the code below for a process of OnDemand
  http://Apex.Oracle.com/pls/OTN/f?p=11933:13:3295006254376178
  Can I set the height and have the vertical scroll bar with the pre tag?
  I tried a div without success.
  
  declare
  VARCHAR2 (4000) l_Id;
  l_String varchar2 (32767).
  Start
  
  Select the DESCRIPTION in l_String of "RANDOMDATA' where id = v('TEMPORARY_ITEM');
  
  HTP.p ("& lt; pre & gt ;'|| l_String | "& lt; / pre & gt ;') ;
  
  end;
  
  
  Thank you
  Tim
  
  Published by: Tim Arnold on January 18, 2009 08:14

  Hello

  When you tried with your DIV, you specified a width style? I found that it only works when you have this game.

  Something like:

  <div style="overflow-y:scroll; height:100px; width:200px;">
  <pre>
  ...
  </pre>
  </div>
  

  will work, but:

  <div style="overflow-y:scroll; height:100px;">
  <pre>
  ...
  </pre>
  </div>
  

  will not work. I don't know why!

  Andy

• How a bean can call another a bean method without declaring

  Java EE 6 tutorial contains a "Case Study of the Duke's Bookstore example". I did not understand after statements of this case study:
  
  * BookstoreBean.Java*
  
  {code}
  public String add() {}
  Book book = getFeatured();
  () Cart.Add
  book.getBookId (),
  Book);
  message)
  NULL,
  "ConfirmAdd,"
  (New Object() {book.getTitle ()});
  
  return ('bookcatalog");
  }
  {code}
  
  * ShoppingCart.Java*
  
  {code}
  @Named ("cart")
  @SessionScoped
  SerializableAttribute public class ShoppingCart extends AbstractBean implements Serializable {}
  {code}
  
  In BookstoreBean.java, the purpose of the basket is not defined anywhere. How can the add method call add on the bean wagon without declaring the purpose of the basket. Is it because of the context and dependency injection?

  Elya wrote:
  In BookstoreBean.java, the purpose of the basket is not defined anywhere.

  I guess you mean it is not initialized with new anywhere. If the basket variable was not defined anywhere, you will get a compilation error.

  Is it because of the context and dependency injection?

  See where the cart variable is defined.