Bridge is no longer starts after the last update

Similar Questions

• L875D-10th satellite no longer starts after the system update

  Hello

  After a Windows Update yesterday my system unbootable - little matter what I try!

  And I tried many things to get it started again.

  think like:

  -Passage uefi depents csm and back on trial
  -Different installation DVD original Windows (Win 7/8 x 64 & x 86)
  -Different USB key
  -Erase the HDD on an external PC
  -Reset the UEFI with F9 while inside - system breaks down right!
  -Remove the BIOS battery and battery hand while it is also removed from power like 2 hours
  -Replace the DVD with another
  -Tested external RAM and HDD - ok status

  I can access the menu of boot with UEFI himself (channels here is saved and system restarts), but past that I just get a black screen with backlit, on NumLock no longer, have powerdown to reset.
  At startup, I see the Toshiba Logo.

  Is there an external means to completely reset the UEFI next to Load Defaults while in there?

  Any other suggestions I can do?

  (Sorry for my bad English and greetings from the Germany)

  Hello

  > Is there an external way to completely reset the UEFI next to Load Defaults while in there?

  There is no other method to change the mode of the UEFI.
  You must do it in the BIOS (press F2)

  In order to boot from the external environment or to install systems as Windows 7 or other, need you to change disable secure startup and must pass the CSM UEFI.

  In which case you would use the Toshiba recovery media, these changes are not necessary.
  Have you tried to reinstall the system using the Toshiba Recovery Disk or Flash Recovery USB stick?
  Did you create this recovery media in the past?

• Vista won't start after the last update of Silverlight - restarts constantly

  I installed the latest version of Silverlight from Microsoft Update, July 21.  There are 2 updates, but the other would not move.  My computer worked nomally and later when I stopped it, I got the "Configuring updates... do not turn off your computer" message.  It seemed to take a while, so I went to bed and the next morning, I saw that the computer had finally stopped.  I started it and I got the message "configuration updates stage 3 of 3." 0% complete.  Do not turn off your computer. "After anywhere from 10 seconds to a few minutes, it restarts.  She's constantly - he keeps just reboot and it displays the updates configuration message.  In the System Recovery Options, Startup Repair indicates that everything is OK.  "System Restore" to go to the restore point previous does not work.  What can I do?  The only other option and restore utility is all erase and install the drive from the factory.

  I have Windows Vista, the latest service pack and updates.  I have F-Secure anti virus/firewall.

  He has also failed to the previous Microsoft Update a week or 2 but it gave an error code of that time.  I looked at the error to Microsoft code and it says that the update log was full and there was a command to enter to remedy.  I did that and installed the update and everything was fine.  Unfortuately I have more error code or order more.

  Perhaps related to this problem?  My computer is pretty much dead now after Silverlight updated because it constantly restarts.

  Don't boot from the XP CD.

  Do an ERD of VistaBootable of the info below:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the link provided and make a bootdisk of it.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  Mick Murphy - Microsoft partner

• 6 Lightroom does not start after the last update of victory 10

  Hello

  After installing the latest updates of victory 10 yesterday my 6 Lightroom won't start no more. I tried to reinstall, fact the renaming of files SLCache and SLStore, past all antivirus and firewall off the coast. No results on the start screen, I always get a pop up saying that LR does not work properly because of the problem and that patients be informed as soon as there is a solution. It stops...

  Can someone help with this problem?

  Hi jensk

  Name the module fehlerhaften: ig7icd64.dll

  Update your graphics card driver.

  ig7icd64.dll crashes due to a deprecated module / driver for your graphics card

  Concerning

  Assani

• iMac does not start after the last security update

  Hello

  After the last update my iMac (late 2009, El Capitan) does not start.

  The iMac starts he accepts my user and password entry, the loading bar stops at 80% and then nothing happens... after I turn off the iMac. Repeating this procedure change nothing.

  Does anyone have any advice for me?

  THX

  INTELLECTUAL PROPERTY

  a solution that helped me:

  Re: security update causes damaged Apps

• Left Mouse Button functions any longer after the last update no.

  After the last update, the left mouse button no longer works, I contacted HP who says that it is Micorosfts question.  When I asked the representative of the conversation, only not HP uses Microsoft Windows HP computer and said that if there is an update then also that Microsoft is responsible as well as HP as HP uses Microsoft products in the computer.  So, apart from that, I have not got absoblutly no supported.  I restored my computer to an earlier time.  Once more the left button of the mouse does work, so now, in this sense.  Microsoft since it is the problem of software due to the update you gave, apart from making a full recovery on my computer, are there updates to counter what had made the last update?

  Chingy salvation,

  Have you tried following this http://support.microsoft.com/kb/315539 kb and the removal of all drivers (even the most 'ghosts' or greyed out) for the mouse who is or has been on your system? Sometimes, there is a driver that conflicted with the new that can cause this problem.

• After the last updates of windows have problems with start up and now drivers

  Hello

  After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

  May 14, last night I had several (automatically) downloaded windows update

  Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

  Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

  Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

  Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

  Thank you

  Hi Jane,

  You have a disk to install Windows 7 with you?

  I suggest you to check the event viewer for error details report.

  Open event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

• Hi, I have 0xc0000142 error when I start the first pro after the last update, before that I had no problem playing first pro...!

  Hi, I have 0xc0000142 error when I start the first pro after the last update, before that I had no problem playing first pro...!

  Hello Gene,

  You may need to check this: Re: Premiere Pro 2015 won't open after the recent update

  Kind regards

  Navdeep Pandey

• After the last update, the start photoshop it gets for minutes flashes.

  After the last update or after you install the "fuse" CC, the start Photoshop it gets during the minutes flashes. You can't do anything until it stops flashing. It is impossible to work with him. Because there are times that even after you have opened the file it is as if I had something working and takes too much time to perform any operation. And displays an error message. keeps flashing and press 'ESC' to stop and get something. But still, he said, showing the cursor how had tried to open something in the background. One of the moments where I started Photoshop appeared to show two fields seemed 'user' and 'password '.  I tried to remove and reinstall and nothing... still the same thing.

  I installed a previous version of the application to not stop working. I expect a solution to the problem to reinstall the latest version.

  S.O.: Windows 10

  Hardware: Dell Inspiron 5421 - i7 / 8G RAM / Nvidia GT 730 M 2 G

  Thank you

  L.Roma

  I don't think that's the problem. I solved the problem by using an earlier version, while the youngest is not corrected.

  To install an older version I do the following:
  1. open a creative cloud application
  2. in front of 'Find Apps more' I click on "Applications" and change to "show other version."
  3. I have local "Photoshop" and I click on the 'Install' button and chose an older version, in my case, I prefer "CC (2014).
  4. wait for install and now I work normally.

  I hope this has helped.

  Kind regards

  L. Roma

• Change PDF after the last update

  I had Acrobat Pro for over a year. After the last update that I can edit is no longer a PDF document - I just get the button «read more»  I signed what is now called "Adobe Acrobat Reader DC".  My subscription is updated on the page 'Plans and products. I use Windows 7 on a desktop PC.

  You seem to have replaced your Acrobat Pro (paid) with Acrobat Reader (free) subscription. You must use Acrobat Pro. It should always be in your menu START. Recommend that you uninstall Reader.

• After the last update on Wnidows 7 Firefox opens just a blank screen (black).

  After the last update Firefox on a machine Wnidows 7, Firefox opens just a blank screen (black). It worked fine until the latest update. It does not open in "safe" mode I tried several facilities clean and using various other compatibility settings. I also tried various changes of display. Closing X is still under the black forest as I can by conjecture activate this.

  Get a black screen after updating to Firefox 33 can be caused by a problem with hardware acceleration in Firefox.

  You can check if there is an update for your graphics display driver.

  Try to start Firefox in Safe Mode by holding down the shift/Options key.

  Disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  You will need to close and restart Firefox after enabling/disabling this setting.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

• Single-pass does not work for Web sites after the last update of firefox

  Single-pass does not work for Web sites after the last update of firefox. This works in IE and Chrome and it works under windows (when starting the computer), but not with any website in Firefox.

  Firefox 30 spent some less commonly used "Always turned on" plugins "asking to activate. To check and change this to SimplePass, you can use the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Then on the right, check the control on the right side of the SimplePass.

  You may need to exit Firefox and start it again before it takes effect.

  A little luck?

• New tab doesn't seem to work after the last update. Please fix this

  After the last update, I was not able to open a new tab (if using the menu FILE > new tab or by pressing CTRL + T). I use windows 8.1 SL 64-bit. When I restore the old version, the new tab feature seems to work.

  This problem may be caused by an extension that is not working properly.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Firefox extension: 'TrueSuite 5.2.500.16' stopped working after the last update of firefox (30.0), although subject: said plugin activated. No difficulty to make it work?

  Firefox extension: 'TrueSuite 5.2.500.16' stopped working after the last update of firefox (30.0), although subject: said plugin activated.

  I tried to reset firefox and search for similar problems, unfortunately found nothing.

  It is also weird empty space before the address in the address bar

  other extensions and addons seems to work very well.

  Firefox 30 spent some less commonly used "Always turned on" plugins "asking to activate. To check and change this to TrueSuite, you can use the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Then on the right, check the setting on the right side of TrueSuite.

  Any difference?

  Note to other readers: the original poster had to leave Firefox and start it again until it is actually entered into force.

• Why Web pages show nbsp; all the pages after the last update?

  My operating system is Windows XP. After the last update for Firefox 29,0, web pages started showing nbsp; through, including my home page. I've never seen until the last update. Internet research indicate that this indicates a space when the web page is developed, but is not intended to be displayed. Why am I now see this on most of the web pages I visit? Is there a change or fix that I can install to ban this appears?
  Thank you

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot
  • https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem

  Use a type of compressed as PNG or JPG image to save the screenshot.

  & nbsp; is the HTML entity for an unbreakable space code and should not appear as text, if you see this on a lot of pages then something like a Firefox extension or other (security software) might be causing such a question.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/