iMac does not start after the last security update

Similar Questions

• Two iMacs does not start after the 10.11.4 update.

  Two iMacs does not start after the 10.11.4 update.  Progress bar starts moving and then text appears on the black screen saying unexpected sigkill to launchd.  He then gets stuck in a loop trying to start.  Tried to reset the SMC and LANDAU.  Without success.  Started in recovery mode and ran disk utility.  Discs said OK.  Chose to reinstall OS X from the list of options in the recovery mode (assuming it would be 10.11.4).)  Installation is finished but still once does not start.  Reinstalled on 10.11.0 successfully from a USB key and downloaded the 10.11.4 combo updater.  Installation seems to work, but once again, the macs will not start.  Same 'unexpected launchd sigkill' error.  A mac is now back working properly with 10.11.3 the other will be shortly.  Is there a problem with the accession?  Our COMPUTER support use Munki to get updates from one day to the next.  Fortunately, we were able to stop it before the other 20 or if Mac had the same problem.

  More information: two bricks iMacs were late 2013 models.  A 21 "and a 27.  We have just updated a test iMac which was a late model 2012 using the 10.11.4 combo updater.

• HP elitebook 2540p does not start after the successful bios update

  Hello people,

  I need your help.

  my hp elitebook 2540p with 2.5 "hhd does not start after a successful bios f.03 to f.24 upgrade done through windows 7.

  When I turn it on the blue light of wifi and power is on but nothing happen.

  I tried to remove the chip from the bios, cmos, hdd, ram, wifi battery... all, but nothing doesn't happen.

  I also tried to start it with the victory + b procedure and win + procedure four arrows so without USB key the caps lock flashing indefinitely but nothing happens, only the fan works quickly with a blue light

  with the USB the system restarts itself every two seconds and I have to remove the USB key.

  I do not know how...

  Thanks for any help.

  Luigi

  all very well now. I used the f.20 rom based on the internet and everything works again.

• Windows 7 does not start after the installation of updates - sounds familiar!

  Apparently, I have another system that no longer starts after you install an update to Windows 7. New kick computer _ I have to disable the automatic update of windows. Twice I had to restore the system in the first week because he hung up after the installation of updates for windows 7. I have no idea what update is the cause of the problem.

  Essentially, start the screen goes black with the cursor blinking in the upper left corner of the screen. The only way out is to restore the system.

  Does anyone know what update is the culpret? HP support has no idea. Their only solution was to update windows 7 to 'never download an update from windows '. It is a terrible thing to be underestimated solution.

  Here's the resolution...

  I installed all the updates except KB2284742 954430, 973688 and 971033. So I decided to install these 1 4 at a time in the order shown. I installed successfully 228472 and 954430 and 973688 disappeared from the list of available updates. So I installed 971033 and it installed successfully and I was still able to restart.

  My conclusion is that there is a conflict between the first 3 updates when they are installed at the same time.

  Now my system is up to date with all windows updates and I'm able to restart without any problems!

  Close this message.

• 6 Lightroom does not start after the last update of victory 10

  Hello

  After installing the latest updates of victory 10 yesterday my 6 Lightroom won't start no more. I tried to reinstall, fact the renaming of files SLCache and SLStore, past all antivirus and firewall off the coast. No results on the start screen, I always get a pop up saying that LR does not work properly because of the problem and that patients be informed as soon as there is a solution. It stops...

  Can someone help with this problem?

  Hi jensk

  Name the module fehlerhaften: ig7icd64.dll

  Update your graphics card driver.

  ig7icd64.dll crashes due to a deprecated module / driver for your graphics card

  Concerning

  Assani

• iMac does not start after the update of the Sierra...

  Don't know what to do. Sierra, just updated and now my system hangs during startup and turns off.

  Anyone else seen this? No idea what I can do?

  Try a safe boot. Otherwise, you might to reinstall macOS.

  ----------

  Stop your Mac. Use the power button if you wish. Now start with the SHIFT key is pressed. This will start in Safe Mode, with all extensions turned off. Safe mode is slow to start, so give it time, it checks a lot of tasks. If it works fine in Safe Mode, restart normally. If it works now, you are finished.

  If the problem comes back after a reboot, you may have an extension conflict. Disable all extensions via system preferences. To isolate which extension is at fault, turn on an extension at the same time, restart in the meantime, until you find bad.

• computer does not start after the installation of updates

  Just click on the button "installs the update and the computer shuts down."  When the computer turns off automatically, I pushed the power button and now it is frozen the computer in start mode.  What should I do now?  Can I power off and try again (or which will mess up the configuration of the update that he just installed.

  Note: There are 21 updates installed last night without problem; then 1 update again (that set up correctly when I restarted this morning).  After a successful this morning launch, I noticed there was an another update to install, which is what made me at this point.

  Single computer at home (I use my work computer to submit this application).

  Wait awhile and see if, during the initialization of the problem to be solved or not. It is NOT a good idea to unplug the laptop.

  If this does not work, then try to press F8 and choose last known good configration, but you may need to reinstall the update again.

• BDP 3100 Youtube freeze and Yupp TV does not work after the last firmware update

  Hello

  My Youtube app on the Bluray Sony BDP - S3100 drive freezes when I play any video. It says LOADING... and plays the video completely. But the Player hangs and I have to be able to market. This started happening since yesterday is to say 26/06/2013.

  The other problem is with the YUPP TV App.

  After my latest firmware upgrade June 4, 2013 live channels on the YUPP TV app does not work peoperly. It says loading and will market every 5 to 10 seconds. On demand videos are very good. This began to happen immediately after the upgrade on June 4, 2013 (M14. R.0136). but after that, there was a more updated firmware that says that connectivity issues fixed on 08/06/2013 (M14 Version. R.0138). I've updated on my player. Yupp TV questions are still there. YouTube has been fine since then, but then the Youtube above issue started happening since yesterday and I have reported to the Youtube community as well.

  Could you fix Yupp TV, I'm sure that updating the firmware.  Also please check if Yout tube is with the firmware...

  Let me know if you need additional information.

  Thank you
  RAM

  At least I'm not alone, until a few days earlier, alls well, now, I have the same problem, so that makes three of us.  New default factory setting does not so I think a firmware issue, all other channels & functions outside of youtube look... very annoying

• Windows does not start after the most recent update

  I have 64 bit Vista and Office 2007. There was a group of updates for the latter in February 2011. Something in here is stop Windows at the login screen. Workes mouse and keys stick, but it won't take me to the password screen. Only way to get around it was to go in safe mode and do a system restore to remove the updates. Any suggestions?

  Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself.

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of Norton 360 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8 reset the advanced settings of the IE by http://windows.microsoft.com/en-US/windows7/Reset-Internet-Explorer-settings

  9. open Internet Explorer (32-bit) only to http://support.microsoft.com/kb/971058 [ignore APPLIES to section] & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  10. restart once again & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• System does not start after the installation of update (10thFeb10)

  Updates to auto (windows Update) using.  Downloaded automatically update yesterday (10thFeb10) and when I shut my computer down it started to install them - as usuall.  However start my computer than this 11thFeb10 am and he began to run through regestry files when starting up.  Then it is impossible to load windows.  Just went to a blank screen.  Rebooted several times and were able to start it in safe mode.  Tried system restore but the same thing happens.  Obviously there was something to this update that 'changed' my computer and I'm not happy about it!  Also thought that there could be new updates (perhaps to fix the last update) but I can not even Windows Update to open it.  Tried online and he tells me that I have never downloaded updates and that none are available.

  I use Windows Vista Ultimate x 86.  I hope someone can help me!

  Got a response from Ms.  Good all who have this problem - you have an ATI Radeon graphics card?  Driver is causing the conflict.  Uninstall all the stuff ATI goes on ATI web site and install the download of 'single driver '.  Reboot and then you can download and install other fancy programs that come with your graphics card.

• ENVY M6 - 1184ca: 8.1 for Windows does not start after the installation of update KB2919355

  Updating Windows 8.1 KB2919355 has proved to be extremely problematic for me. When he was released at the beginning of 2014 that I was not able to get installed it with the exception of two occasions, the first being several months ago and the second time, a few days ago. I have constant pain to try to get the update of KB2919355 until recently. What finally got the update installed was opened as administrator command prompt and type the following commands,

  DISM/Online/Remove - Package PackageNameackage_for_KB2919355 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.3.1.14 

  and then

  DISM / online/cleanup-image /startcomponentcleanup

  So now, the update of KB2919355 has been installed. Only one problem: like the first time I had the installed, Windows Update leave commissioning. As the HP splash screen that normally appears during the startup process appears after about 3 seconds, Windows displays an error Stop, and for a fraction of a second will display SYSTEM_THREAD_EXCEPTION_NOT_HANDLED error, which as I read, is related to the graphics drivers. The thing is, after the cancellation of the update (the computer in Mode safe start put Windows automatically uninstall the update and everything goes well after), then go in and uninstall the graphics driver, restart, reinstall the graphics driver and reboot again, and then reinstall the KB2919355 update, the problem recurs. I also tried to download and to install the new update of firmware for my particular DESIRE machine which was released a few days ago, but which has not helped either.

  I'm really stuck. I looked up and down, and I scoured Internet for anything that might help. I need to update KB2919355 be installed because without it, I can't book my free upgrade of Windows 10. This laptop is about 2 years and a half old now, so it fulfills all the prerequisites for Windows 10.

  Please do not suggest that I do a Refresh of the system or a system reset, as I have no way to back up my programs, that which some I would not be able to reinstall because I have more drives for some of my programs. Also, I can lose to save him for some of my games.

  When people ask me "What's up?", I always say 'the CAP '.

  So that seems to have solved the problem that is described in this post here. I followed the suggestion, which was to uninstall the driver, SPDT DuplexSecure (which has something to do with the SCSI devices, I'm not quite sure) using the SPDTinst (download here) and now it seems that Windows has started without crashing after installing the update KB2919355. I'll check my Windows Update history and see if it is there.

  Low and behold, a year to be really behind value is ultimately more. I have successfully obtained the update of KB2919355 works on my computer.

• Reviews of Ubuntu does not start after the installation of updates

  I have a Windows 10 host and a guest Office Ubuntu 15.10. Ubuntu installs and runs fine until I have install updates, and then it gets so far through the boot sequence, but blocks trying to start the GUI.

  What should I do?

  Hello

  can confirm: after installing the last invited Ubuntu patches of the slaughtered 3.16.0-62 core during startup.

  Latest posts is: failed to start the vmware services.

  logfile VMware stops at the loading HGFS subsystem.

  To access the guest computer resolution: Boot with advanced options (hold SHIFT to start, until the menu loader grub is shown). Now select boot option (!) lower than 3.16.0 - 62.

  With 3.16.0 - 60, the guest operating system will start normally. Reinstallation or reconfiguration of the vmware tools don't fix this behavior. If something seems broken with kernel 3.16.0 - 62

  Any solution with core 3.16.0 - 62?

  Best wishes

• Satelite P300 does not start after the failed Bios Update

  Hello world

  I tried to update the bios of a P300 to this:
  18/03/10
  Update the BIOS
  Toshiba Windows 7-32 Bit 4.20 - WIN32 World Wide
  That I downloaded here: http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK after entering my laptops specs.

  The process flash hanged during the update and the laptop became screen starts, blank when turning on and nothing else...
  I tried to use the Phoenix of emergency crisis, created a diskette with the file Bios image that I downloaded but nothing succeeded.

  Access to the floppy drive USB floppy when you enter the recovery mode, I hear the beeps that indicate that a process is carried out, but when everything stops and restart... the problem remains.

  -Does anyone have a clue what to do next?
  -The warranty is void after a bios update attempt?

  Thank you for yor time.

  > - Someone at - it an idea what to do next?
  Well in this case, you will need to contact a local ASP (Toshiba authorized Service Provider).
  Guys could clean CMOS and flash the BIOS ROM module with a BIOS disk special crisis

  You will find here all the FSA all over the world:
  http://EU.computers.Toshiba-Europe.com-> support download &-> locate an authorized Service partner

• ZTE phone open does not start after the 1.1 update

  I got the download of the update 1.1 ZTE official. I followed the instructions, but when the phone rebooted it goes to a white screen after reading the firefox boot animation. I left it sitting there for 10 minutes and he wouldn't answer. Eventually had to remove the battery.

  I tried the md5 check, and I get the following error:

  Conclusion File_List package... Open the File_List packaging... Checking File_List package... E: can't open /system/etc/verify.zip (no such file or directory) E:signature check failed

  I tried to reinstall the update and got this:

  -Install /sdcard... Finding update package... Open the update package... Verifying Update package... E: did not check the whole-file signature verification E:signature doesn't have an abandoned facility.

  Is it possible to restore my phone? I searched the internet and I keep getting linked on the ZTE site open, but the old images seem to have been deleted.

  Now, when I boot the phone I get the logo of FireFox OS, then fox animation, then I get a quick Flash of white light before the screen turns off.

  If someone could help me, I would appreciate it. Thanks in advance.

  Update.

  I've contacted the ZTE ebay store and for about 2 weeks, came and went with things to try. Nothing helped, and they end by had me send the phone back and sent me a replacement.

  The new phone is still the old version of the operating system, but at least it works.

• Satellite A40-231 does not start after the incorrect firmware update

  Hello
  I have a toshiba satellite a40 - 231.it unbootable because I flashed it's drive(sdr-6112) dvd - rw with the wrong firmware and I also made a mistake in making a non bootable back active partition, try to Flash the correct firmware. So my question is: can I boot from the usb flash drive? I think it's the only option I have left, if not network startup.

  Thanks in advance!

  Hello

  As far as I know it of not possible to start other devices from the USB FDD / HDD / CD-ROM / LAN

  You can boot from network, but if you want to install the OS via the LAN you will need a RIS server. But it's not easy to do without any additional experience. So I think that this option isn't for you.

  It seems that the drive is dead or is malfunctioning and that is why the best idea is to replace the device's drive. I know, it's hard to hear that, but I don't see any other solution