BSoD Vista with the code

Similar Questions

• When you try to activate Windows Vista with the key that came with it, I get an error that the key is of the wrong type for activation.

  activation code

  I had a hard drive crash and installed the new hard drive. Installed my copy of vista that came with computer and when I tried to activate the software with the code provided with this windows says it's the wrong activation for this software.

  1. start your own, new thread in the following Microsoft Genuine Advantage forum and repost your MGA journal, and a clear description of your problem:

  http://social.Microsoft.com/forums/en-us/genuinevista/threads>

  2 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:

  http://go.Microsoft.com/fwlink/?LinkId=52012>

  3. try the listed here appropriate phone number: phone numbers Microsoft Activation centers worldwide:

  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx>

  UTC/GMT is 21:19 Saturday, may 12, 2012

• Reinstalled Win Vista with the recovery CD that I got with my HP Pavilion, now get quick activate Windows with a new product key.

  Reinstalled Win Vista with the recovery CD that I got with my HP Pavilion, now get quick activate Windows with a new product key.  MS sticker on the tower is one that says 'Vista', no product key.  When I go to activate Windows, I offer the choice to buy another copy of Windows or enter a new product key.  A run the Genuine Advantage tool and he says it's "authentic."  HP will not help, they say I have to buy another copy of Windows from MS, but I already paid for it when I bought the machine.  What can I do?
  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: genuine
  Validation code: 0
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - 27HYQ - XTKW2-WQD8Q
  Windows product key hash: U8YEZzymoD4DMyaMb32rPrNIS90 =
  Windows product ID: 89578-OEM-7332157-00061
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.0.6002.2.00010300.2.0.003
  ID: {168A88C1-E5B9-4D60-9CED-7F52DA3B003F} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows Vista (TM) Home Premium
  Architecture: 0x00000000
  Build lab: 6002.vistasp2_gdr.101014 - 0432
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 7.0; Win32)
  Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {168A88C1-E5B9-4D60-9CED-7F52DA3B003F}1.9.0027.06.0.6002.2.00010300.2.0.003x 32*-*-*-*-WQD8Q89578-OEM-7332157-000612S-1-5-21-1435749754-187019022-2857907007HP-Pavilion,RK573AA-ABA a1710nPhoenix Technologies, LTD 5,0720070319000000.000000 + 000B5303507018400F810090409Eastern Standard Time(GMT-05:00)03HPQOEMSLIC-CPC109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.0.6002.18005
  Name: Windows Vista, HomePremium edition
  Description: operating system Windows - Vista, channel OEM_SLP
  Activation ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 89578-00146-321-500061-02-1033-6000.0000-0852011
  Installation ID: 012511236930294740295602407015475991935936271095890640
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
  Partial product key: WQD8Q
  License status: initial grace period
  Time remaining: 15840 minute (s) on (11 day (s))

  Windows Activation Technologies-->
  N/A

  --> HWID data
  Current HWID of Hash: OAAAAAEAAgABAAEAAwACAAAAAwABAAEAJJSQuYpR4jtIJGQJ9DG0EIC68vQa7DYXAnisVr34jrY =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20000
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  HPQOEM APIC-SLIC-CPC
  FACP SLIC-CPC HPQOEM
  HPET SLIC-CPC HPQOEM
  MCFG SLIC-CPC HPQOEM
  SLIC SLIC-CPC HPQOEM
  SSDT HPQOEM SLIC-CPC

  Your tour definitely had a COA sticker initially (or at least if it does not, the HP was in breach of its contract with MS conditions).

  Let's try a possible alternative solution...

  Note that the key comprehensive OEM_SLP used here is * removed the product key for privacy * and you must enter if asked...

  Your license store is perhaps corrupt - please try the following...
   
  Please try the steps below to re-create the files of the Bank.  This can solve the problem.
   
  (1) open an Internet browser window.
  (2) type: %windir%\system32 in the browser's address bar.
  (3) find the CMD.exe file
  (4) make a right click on CMD.exe and select "Run as Administrator"
  (5) type: net stop slsvc (it may ask you if you're sure, select Yes)
  (6) type: cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareLicensing
  (7) type: Rename tokens.bar tokens.dat
  (8) type: cd %windir%\system32
  (9) type: net start slsvc
  (10) type: cscript slmgr.vbs - FLIR (it may take time for this will be complete, please be patient)
  (11) restart your computer twice.
  (12) you may need to enter you product key and activate it.
   
   
  Once complete, please post back with a new report MGADiag

• How to fix the error with the code: 0xe7210001 failed to load powrprof, object: cls

  Hello

  Dose anyone know how to fix the error with the code: 0xe7210001, message: unable to load powrprof, object: CLSD-no-it is found;
  OR: Fingerprintsoftware OR error: replicas THotkey.exe message window and the computer freezes

  Maleware scanned and virus, also in safe mode, found no infection, reinstalled driver fingerprint, but nothing has changed.

  grateful for the help!

  Hello

  > message: unable to load powrprof, object: CLSD-no-it is found;
  In my view, this would mean that there is a problem with Toshiba Power Saver
  What laptop Toshiba, you have exactly?

  Maybe reinstall Power Saver could help. You can find it on the official website of Toshiba.

• Hi.I download Microsoft Security Essentials and installation becomes a problem with the code: 0 x 80070643. If you can help me...

  Hi.I download Microsoft Security Essentials and installation becomes a problem with the code: 0 x 80070643. If you can help me...

  Support Microsoft Security Essentials forums
  http://social.answers.Microsoft.com/forums/en-us/category/MSE

  Can I install Microsoft Security Essentials [or any other anti-virus/anti-spyware application] to clean my already infected computer?
  http://social.answers.Microsoft.com/forums/en-us/msescan/thread/87058857-D181-4019-a723-efd9a49d9275

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I get system off with the code 68072590 after 3 failed attempts

  I get system off with the code 68072590 after 3 failed attempts

  AM trying.

  77950516

  Use this code to go into the BIOS.

  Disable all passwords that are enabled.

  IF demand for CURRENT password using this code.

  REQUEST NEW password just press ENTER.

  If asked to hit just to CHECK password to enter.

  Save and exit.

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• I'm trying to reinstall windows vista with the cd that hp sent me.

  I am trying to reinstall windows vista with the cd that hp sent me and he used to in stall, I had to have a new hard drive put in and I'm trying to put vista in and I can't help please

  If you have problems with the HP recovery disk, you will need to contact HP.

  This is HP Recovery Media, not Microsoft.

  HP Contact Info:

  http://welcome.HP.com/country/us/en/contact_us.html

  See you soon.

  Mick Murphy - Microsoft partner

• Problem with the Code for the form Page

  I have a problem with a page of form to http://www.enonumc.com/PrayerRequest.html in the month passed, the form created an email that worked perfectly, providing all the information to a specified address.

  Recently (last week), we have received an application form email that still had the information for each of the observations labels, but no info after the sign = for the top three submissions. I always get the news option (name, e-mail address, phone number), but none of the drop-down choice list of the box, the text in text box in the prayer request box, or choice of rather we must respond or not.

  Any suggestions of what has happened with the code?

  You can start with code 50 or so on the page validation errors.

  [Valid] Validation of the markup of http://www.enonumc.com/PrayerRequest.html - W3C Markup Validator

  As to why the form processing script doesn't work well, maybe something has changed on your web server.   Ask your hosting provider.

  Nancy O.

• AdobeUpdateServerSetupTool returned with the code: 1.

  I just ran the command:

  / Applications/utilities/Adobe\ Application\ Manager/CCP/utilities/AUSST/AdobeUpdateServerSetupTool - root = / Library/Server/Web/data/Sites/Default/AdobeUpdates - incremental

  on the server.

  He gave the following result

  Incremental synchronization is selected.

  Treaty on the elements of the 1077 1077.

  Error 1 points.

  AdobeUpdateServerSetupTool returned with the code: 1.

  For more information consult AdobeUpdateServerSetupTool.log to/Users/mutualmobile/Library/Logs.

  Any ideas what error code 1 mean?

  I guess this means that there are some errors. I posted another message on this forum

  http://forums.Adobe.com/thread/1394780

  Error 1 is probably for these errors listed in this thread.

  Basically, it does not matter this error message you get, just run the command again and I hope that it works fine the 2nd time.

  If this is not the case, try again until it works well at the 3rd time.

• com Apple.launchd.PerUser came out with the code: 4

  We create a game to run on the mac desktop.

  The game was built using Flash Builder 4.6 on the pc, using Air 3.5 (using Air 3.4 until a few days ago)

  I create the SWF on the pc and then copy it on in the mac mini - (which was running OSX 10.7 - updated updated yesterday at 10.8 in case that was the problem)

  Once on the mac mini - using the 3.5 SDK for mac Air to build the .app using ADT

  / Users/macmini2/Documents/AdobeAIRSDK/bin/adt - package - keystore MM2.p12 - storepass PASSWORD - pkcs12-bundle stores target "... / release/Megaplex2.app"Main - app.xml Main.swf AppIconsForPublish data.

  When I run the file final app on the mac mini, it works without any problem. (OSX 10.7 and 10.8)
  I also tested this app on a macbook pro with no problems (OSX 10.7)

  The results of problem when we send the app to our distribution partner. They report that the application fails to start:

  On my Mac Mini (10.6), it never seems to. On two of the iMacs from our Mac Tester, the application icon appears in the dock momentarily, before closing then (no window appeared).

  So far, the only clue to this is a log of the console where it out this:

  08/11/12 com.apple.launchd.peruser.243932923 [132 5:12:00.800 PM]: ([0 x 0-0x3f33f3]. Megaplex2 [3114]) came out with the code: 4

  08/11/12 com.apple.launchd.peruser.243932923 [132 5:12:04.907 PM]: ([0 x 0-0x3f43f4]. Megaplex2 [3118]) came out with the code: 4

  08/11/12 com.apple.launchd.peruser.243932923 [132 5:12:06.240 PM]: ([0 x 0-0x3f53f5]. Megaplex2 [3120]) came out with the code: 4

  08/11/12 com.apple.launchd.peruser.243932923 [132 5:12:35.596 PM]: ([0 x 0-0x3f83f8]. Megaplex2 [3127]) came out with the code: 4

  08/11/12 com.apple.launchd.peruser.243932923 [132 5:12:37.040 PM]: ([0 x 0-0x3f93f9]. Megaplex2 [3130]) came out with the code: 4

  
  I installed the runtime air on Air 3.5 build computer and it made no difference.

  Someone has an idea of what could be the cause?

  OK, looks like we found the problem.

  When I was zipping the app to send them, I was the Zipper on the PC.
  Turn, it is the cause.

  If I zip on the mac using its "compress" function and send the zip, it seems to work ok.

  /me shakes his head.

• Film does not stop on the frame with the code

  I'm going to build my first Web site in flash. My problem is that my film does not stop on the frames that I have inserted a code action stop.

  I designed and imported here in Flash components and, moved the pages to the various frameworks so that they do not overlap. Then I clicked on the image I want each page to stop. I applied a stop since the code snippets code and below you can see that they exist in each image, in that I want to stop. Why it stops?

  

  Which is not related to anything other than a general login page.

  Based on the image that you show, there are a number of images with the code in it.  What is the code that is in frame 1?

• connect two Drop Down list with the code name.

  Hello guys,.

  I have ' starting my LiveCiycle, I have trouble linking two fields in the drop-down list. How can I connect two fields drop-down list? For example, a user selector, the name of the professional and the other menu drop-down is updated with the code of work based on the choice of the name.

  Thank you.

  Take a look at the attachment. It's a way to achieve this. The result like this...

  

  

  

  Steve

• Something wrong with the code!

  Hi all
  
  I have had trouble with the code below for nearly 3 hours and do not seem to be closer to a solution, I was 3 hours ago. For some reason, after the < / mx:DataGrid > tag, all my code "disappears" Flex Builder 2 can not see all this and starts to complain. It is said he can not see my closing < / mx:Canvas > tag. I took a < / mx:Canvas > tag and moved to the bottom of line by line and have reduced the problem down to the following lines. But, for the life of me, I don't see what is the cause!
  
  If anyone can find anything?
  
  Thank you! Code is below:
  
  < mx:DataGrid id = "InboxViewGrid" right = "10" low = "10" left = "240" top = "64" cornerRadius = "20" dataProvider = "{mailChecker.lastResult.messages.message}" creationComplete = "mailChecker.send ()" / > "
  < mx:columns >
  < mx:DataGridColumn headerText = "Status" dataField = "status" width = "22" / >
  < mx:DataGridColumn headerText = "" dataField = "" width = "100" / >
  < mx:DataGridColumn headerText = "Subject" dataField = "subject" width = "200" / >
  < mx:DataGridColumn headerText = "Date of receipt" dataField = "date_received" width = "55" / >
  < / mx:columns >
  < / mx:DataGrid >

  Quote:
  Posted by: DigiMan74354
  

  Quote:

  It seems that you already close the datagrid component here.

• Satellite A80 - in ODD device with the code 39 error Manager

  Hello

  I have a Satellite A80 127. I have a problem with my CD player.

  When I tried to upgrade my XP Home Edition of XP Pro SP2, display said the restart that he couldn't play in my CD player. During the inspection, I found that my CD/DVD drive is unable to read CDs if it can read the DVD. From what I remember, it was working fine a few days before.

  I tried to locate the source of the problem and with the option of troubleshooting, I found that I have a yellow exclamation mark against my SCSI/RAID host controller in my device (with error code 39) Manager. I could not update the driver it give me an error message. In addition, there was a controller SCSI/RAID of Nero. I tried to remove to check if the main works, but always without success.

  Any suggestion would be great, and in the meantime I'll try to find similar topics.

  Thank you
  knockaert

  Hello

  Check this thread http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=111441 please

  Good bye