Bug in the DisplayNewUserDialog method?

Similar Questions

• XMLFile parameter is not supported by Oracle APEX, please use the setXMLFile() method

  "XMLFile parameter is not supported by Oracle APEX, please use the setXMLFile() method.

  I created a test web app in apex.oracle.com to try a few things. I created a Flash 2D pie chart in a Web page, and it seems to make very well. But before rendering, I get the error message above, on the region of graph for 1-2 seconds.

  Can anynone tell me what means the error message above and why I'm getting this. I do not use a custom XML part. Has not changed the default settings of the chart area.

  I could see above the error appearing clearly since the apex.oralce.com is so slow... and graphics region takes awhile to load. Otherwise I could not have noticed. It happens in the IE8 and Google chrome.

  Oralce Apex 4.2.5.00.006 (https://apex.oracle.com)

  Google Chrome 34.0.01847.116

  Internet Explorer 8.0.6001.19518

  Can anyone help please. I'll try to become a test application setup dispalying this awhile earlier error message.

  I used HTML5 graphics in apex 4.2.0.00.27 in my office in my real application workspace. Most of my users still use IE8. HTML5 graphics all appeared well in their IE8 browser. One fine day, some parameters must be changed by my network administrator or soemthing else could have happened. I have no idea. My webapplication HTML5 graphics disappear IE8 users. IE9 users had no problem. I contacted our IT support staff of any changes to security settings that day, or earlier. Absolutely no help from my frustration. I have to change maps of my application (only about 6 of them) to the Flash graphics to overcome this obstacle. This is the story behind why I use Flash cards. If anyone has experienced a similar problem in IE8 HTML5 graphics please shed any light for me... This problem may be nothing to do with the "XMLFile parameter error message', but I'm not sure.

  You strike again BUG introduced with Oracle Application Express 4.2.5

  http://www.Oracle.com/technetwork/developer-tools/Apex/application-express/Apex-425-known-issues-2186292.html

  18601802 - ANYCHART XMLFILE WARNING DISPLAYED BEFORE FLASH GRAPHICS RENDERING when Flash graphics that take a long time to make, the user can see the following warning message appears briefly "XMLFile parameter only is not supported by Oracle APEX, please use setXMLFile() method.» The table will be always delivered. Solution: Please advise end-users to ignore the message.

• Problem with the getCharIndexAtPoint() method.

  Just try to set up a basic script to detect the text when the user clicks on it. The following code:

  trace (caesar_txt.getCharIndexAtPoint (300,300));

  GetCharacter();

  function getcharacter()

  {

  trace (caesar_txt.getCharIndexAtPoint (300,300));

  }

  Produced these results:

  42

  TypeError: Error #1009: cannot access a property or method of a null object reference.

  to fl.text::TLFTextField/getCharBoundaries()

  to fl.text::TLFTextField/getCharIndexAtPoint()

  at Untitled_fla::MainTimeline/getcharacter()

  at Untitled_fla::MainTimeline/frame1()

  If the first command the trace, the character index in this point (42) is returned, but as soon as the trace command is called in a function he faces a null object reference, apparently in the getCharBoundaries method. The field of text in question exist on the stage, it is not created in the code, but I doubt it would be a problem. Appreciate any help you could give me.

  I think you found a bug. I can reproduce it. The reason I think this is a bug is disable Word wrapping (select textfield, go to pass container and flow, defined behavior "Multiline no film"). The bug seems to only happen with active wordWrap.

  I produced the TLFTextField with code and also placed on stage to hand, the two error if the word wrapping is enabled.

  Disable word wrapping made your mistake disappear?

• Another possible bug using the keyboard to save the project?

  Another frustration I have meet in CS6, it is that I have the Ctrl + F > shortcut S to save things ingrained in me way back before Alt + S is a backup option. I noticed in CS6 if my active window in PrPro is the chronology, the reading monitor or monitor multi-cam, I hit Ctrl + F and then will not work S... I followed with the button enter (S puts the right place in the menu file, but do not cause in fact a backup to occur). However, if I'm on the effects, project or any other place in PrPro panel Panel, the shortcut actually works. Is this a known bug in CS6? I guess I could just learn the shortcut Alt + S (it is even shorter), but when you're a touch typist, as I am and have become accustomed to a set of shortcuts, learn of new is incredibly hard!

  First of all, the shortcut right to save Ctrl + S under windows and command-S on mac. It is quite ubiquitous on most of the applications (and has been for a long time), so it is well worth learning.

  Second it seems to be a few leftover buggy intermittently from the old Ctrl + F > behavior S accessibility on mac which I will investigate. The correct method on windows Alt + F > arrow down to 'save' > press ENTER. That is many more clicks than what you remember, but it does not work. The best thing is to use the shortcuts that you see one list of the files (and other), menus and map everything you need that do not exist by default.

• How to use the find method to search for character format substitutions and FMP?

  I strongly suspect that I should be able to use the find method to search for paragraph substitutions and format as these options are available in the Find dialog box. However, because of the excruciating Extendscript documentation from Adobe, I not was able to find the key pieces of information that I need. I found these constants:

  • Constants.FV_FindPgfFormatOverride
  • Constants.FV_FindCharacterFormatOverride

  But he has literally no information about them. It is not yet a definition, so I'm actually just a guess. However, I think that I need to somehow use these constant within the parameters of the Find method. Any ideas on how to do it?

  You're right, there are still some bugs to work out of the documentation, although it has already improved since I started w / Extendscript last summer.

  Find two constants must be defined as the ival for a PropVal FindObject, for example:

  var myDoc is app. ActiveDoc;

  var docStart = myDoc.MainFlowInDoc.FirstTextFrameInFlow.FirstPgf;

  tloc var = new TextLoc(docStart,0);

  var findParams = AllocatePropVals (1);

  findParams [0].propIdent.num = Constants.FS_FindObject;

  findParams [0].propVal.valType = Constants.FT_Integer;

  findParams [0].propVal.ival = Constants.FV_FindCharacterFormatOverride;

  myDoc.Find (tloc, findParams);

  Depending on what you're trying to accomplish, you can also take a look at the property FormatOverride of the Doc, bmp and item objects.

• Bug in the Migration of SQL Developer

  I don't know that this is the right place to report this bug, let me know what is the right place
  
  During the migration from MySQL to Oracle, the string "NULL" is discharged from MySQL in the same representation as NULL (NULL value). Thus, the "NULL" strings are converted to NULL values
  
  Is there a work around for this problem? (other than the update in the source database :)) MySQL
  
  Thanks in advance
  Concerning
  Alfonso

  Hi Alfonso,.
  I reproduced the problem using this table MySQL with the following content:
  drop table alfonso;
  create table alfonso (int col1, col2 varchar (20));
  insert into alfonso values (1,' ');
  insert into alfonso values (2, NULL);
  insert into alfonso values (3, 'NULL');
  Select * from alfonso.

  When I now use SQL Dev to migrate the content using the script method of MySQL database offline are unloaded at:
  123NULL NULL

  -online the discharge of line 2 is similar to the line 3 that the original content is not.
  I filed a bug for the follow-up of your problem.

  In the meantime, you have 2 options to work around this problem:
  -You can use the online data migration method - here the content is migrated correctly
  -you need to change the scripts of unloading
  -online root cause is the script of discharge containing fields escaped by = ""-online you could for example replace with fields escaped by '\' and then NULL is discharged as \N. "

  The discharge now looks like this:
  123\N NULL

  Modify this script to unloading will also need to change the SQL * Loader - especially the CTL file scripts:

  The file generated by SQL Developer for loading data offline using the table in the above example looks like:

  load data
  INFILE 'alfonso.txt '.
  « str "' »
  in the gateway.alfonso table
  fields terminated by ''.
  trailing nullcols
  (
  col1 col1 = 'NULL, NULLIF
  col2 "DECODE (: col2, 'NULL ', NULL, NULL,' ',: col2).
  )

  You must make sure that \N is now correctly mapped to NULL and therefore you have to rewrite the DECODE function:
  col2 "DECODE (: col2, '\\N ', NULL, NULL,' ',: col2).

• The same method works OK a bean, cause of error in another

  For the experienced:
  
  I use JDeveloper 10.1.3.4 and the backup of a page bean, to get an instance of a module application I do this way:
  

      public ZBOVStaffModuleImpl getZBOVStaffAm() {
          FacesContext fc = FacesContext.getCurrentInstance();
          ValueBinding vb = fc.getApplication().createValueBinding("#{data}");
          BindingContext bc = (BindingContext)vb.getValue(fc);
          DCDataControl dc = bc.findDataControl("ZBOVStaffModuleDataControl");
          ApplicationModule am = (ApplicationModule)dc.getDataProvider();
          return (ZBOVStaffModuleImpl)am;
      }
  
      public String commandButton1_action() {
          ZBOVStaffModuleImpl zbovStaffModule = getZBOVStaffAm();
          // ... lines omitted
          return null;
      }

  Before you add only one line in the commandButton action method, it can be called and clicked commandButton1 without causing any problems. Now, simply by adding a line that calls the getZBOVStaffAm() method when you click commandButton1, I got the error in the browser:
  

  javax.faces.FacesException: #{staffLogin.commandButton1_action}: javax.faces.el.EvaluationException: java.lang.NullPointerException

  I removed the line in the commandButton1_action() method and copied the lines of the getZBOVStaffAm() to the commandButton1_action() method method, one line at a time and run the pages and found that when this last line shown here is added, the error has been spilled in the browser:
  

      public String commandButton1_action() {
          FacesContext fc = FacesContext.getCurrentInstance();
          ValueBinding vb = fc.getApplication().createValueBinding("#{data}");
          BindingContext bc = (BindingContext)vb.getValue(fc);
          DCDataControl dc = bc.findDataControl("ZBOVStaffModuleDataControl");
          ApplicationModule am = (ApplicationModule)dc.getDataProvider(); // line causing problem
          // ...
          return null;
      }

  I have no idea why this line would spill error. The getZBOVStaffAm() method is copied word for Word from another bean of support, and in this bean support, this method is called in the same way but has not caused any problems. I checked doulbe ZBOVStaffModuleDataControl data control name is correct. Hope that experienced developers would have some suggestions.
  
  My application is in two parts. For the part of the student, the application module is ZBOVModule. During the construction of the part of the staff, I added the ZBOVStaffModule and built pages and tested features, without joining them with cases of navigation. The bean to support one of these pages, I created this getZBOVStaffAm() methods to avoid repeating the same code. And it has worked very well.
  
  Now all these pages are built and worked, I restarted right at the end of the part of the student, created a diagram vacuum staff-faces - config.xml for testing each reconstructed page, adding the login page and join them in case of navigation. But leader, in the first two pages involving login and required the use of the getZBOVStaffAm(), I went to the problem described above.
  
  Thanks a lot for your help!
  
  Newman

  Hello Newman,

  I see nothing wrong in your code.
  Do you have links in your pagedefinition? If this isn't the case, you can try adding just a few link by drag / drop some attribute on the page and see.

  Sometimes back I faced the same question when I don't have the links in my pagedefinition and adding a component and linking to some datacontrol method/attribute this problem resolved. Not sure if this is a bug, but you can give it a try.

  Jean Lou

• There seems to be a bug in the Pages.  I imported a text in my document to a different font.

  I imported a text in my document Pages.  The two texts were different.  Then I selected all the text and selected in Times New Roman for everything.  I saved and you leave.  I have then opened the document, and the types of two texts are still there.  How can I get everything to be Times New Roman?  That's why I think there is a bug in the Pages.

  Probably, you have two versions of the document and opened a bad.

  Peter

• Hi all OneHow can you buy an IBook UK not available in Indian store a store; When you change the status of your country, your billing information and credit cards won't work; is there a solution for this using the same method of billing.

  Hello world

  How can buy you an IBook of UK not available in Indian store a store; When you change the status of your country, your billing information and credit cards won't work; is there a solution for this using the same method of billing

  There is no solution, if it is not available in your area, you can't buy it.

• Cannot removie trovi add-on from Mac - have tried the validated method

  Need details on how to remove trovi add-on which redirects to a page on a MacBookPro OS 10.9.5 using Foxfire 33.1

  Help please!

  Hello

  Have you checked your Applications for all suspicious programs? If you find any, delete them.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its State default factory while saving your bookmarks, history, passwords, cookies and other essential information.

  Note: After Firefox reset, you will lose all extensions, toolbar customizations, and certain preferences. See article Firefox Refresh - reset modules and parameters for more information.

  To reset Firefox:

  1. Open the troubleshooting information page using one of the following methods:
     • Click the menu button

       

       click Help

       

       and select troubleshooting information. Should open a new tab containing your troubleshooting information.

     • If you are unable to access the Help menu, type Subject: support in your address bar to bring up the troubleshooting information page.
  2. At the top right of the page, you should see a button that says "Reset Firefox" which looks like this:

     

     . Click on it.

  3. Firefox will close and reset. After it's done, Firefox will display a window with information that is imported.
  4. Click Finish and reopen Firefox.

  This corrects the problem? Please report to us! Let us know how you tried.

  Thank you.

• Are you aware of a possible bug in the version 3.6.23? In the browser, for example, "two /" appears with the slash through the 'o'. Is this a known bug? Thank you

  Are you aware of a possible bug in the version 3.6.23? In the browser, for example, "two /" appears with the slash through the 'o'. Is this a known bug?

  When the same text is seen in another browser, it is displayed correctly as "two."

  The same question is displayed on another computer.

  Thank you.

  Sounds that you use a font that supports ligatures (Palatino?).

  • http://en.Wikipedia.org/wiki/Ligature_%28typography%29

• What is the best method to do a clean install of El Capitan (currently using Mavericks).

  I want to do a clean install of El Capitan. I am currently using Mavs 10.9.5 and my time machine goes back to 2010. I don't want to migrate everything. I want to start cleaning up. I read a few methods, but I'm curious to know if there is some consensus as to the best method.

  Make sure that you have a Time Machine backup.

  Download El Capitan and do an install from USB.

  Start the installer from USB and install it.

  (Ref - this :)

  http://osxdaily.com/2015/10/01/clean-install-OS-x-El-Capitan-Mac/

• IOS 9.3 there bugs for the iphone 6?

  Hi guys I have an iPhone 6 currently running in iOS 9.2.1 asked if it is wise to update the iOS to 9.3. Are they bugs in the new iPhone OS 6? Should I update the OS or not?

  just do the update via iTunes by keeping your connected phone. so far no bugs recorded

• When I updated my iPhone 6 more iOS 9.3 my camera will not be to the point and seems blurred by far. I already reset my iPhone and my mother worked... Anything other ideas, might be a bug in the iOS update?

  When I updated my iPhone 6 more iOS 9.3 my camera will not be to the point and seems blurred by far. I already reset my iPhone and my mother worked... Anything other ideas, might be a bug in the iOS update?

  I would say "try and do a restore as new iPhone" like everyone else but I'm having a similar problem and nothing works! I've restored all the possible ways and nothing. I got my screen replaced and I still have the same home button but my phone updated with error 53 (makes the phone unusable) but the camera did work before the update. and Apple has released iOS 9.1.2 (13D 20) to correct the error 53 (mainly for other reasons) but when I go to use the camera, it is only black! If someone could help 'discovered' and I would be great!

• First bug in the new HP update (7820)

  There is a bug in the application 2-var statistics.

  SHIFT + TRACE SETTINGS - see the image:

  

  Now look at the calculator after upgrade:

  

  Where the top menu of the page?

  In 7820, the brand is on the SYMB screen next to his color choices on the right (2nd line S1 config).  Line color selection is on the left (3rd line S1 config).