Bug with all numbered, measures the percentages and units. Help!

Similar Questions

• Measure the voltage and the temperature at the same time with a single card PCI 6014 DAQ?

  Hello guys,.

  I'm doing a charger measuring the voltage of the battery, the charge current and the temperature of the battery using a 6014 cardboard...

  I want to use my PCI6014 DAQ card to measure 2-channel analog voltage input and 1 temperature Channel Analog input using thermocouple type k measurement of voltage or temperature isolation is OK, but I can't understand how to measure the voltage and the temperature at the same time... I want to use input differential...

  Thank you in advance, all the tips

  YSL

  Create a task and add channels to the task, as follows:

  

  Christian

• Measure the voltage and the temperature simultaneously with PCI-6281

  Measure the voltage and the temperature at the same time at the same time. However, when I put the voltage and temperature in a loop, the acquisition of voltage is significantly delayed. When I put the voltage and temperature in two different loop, none of them works.  There is an example in aid of Labview as shown. This structure works fairly quickly? In addition, how a volgate get and temperature Analog DBL 1Chan 1Samp? I check the exported excel, the first column is 0, 1 the second column contains the value of the voltage, temperature value. I wonder how can I get these two values for each scan.

  ,

  Assuming that the DAQ cards can handle it, you can set an analog trigger for the channel of the tension.  Then you just X samples to get your 100us data value.  Keep the last sample.

• Calendar resumes always full screen with black bars at the top and bottom

  Calendar always starts like that. I can reduce and enlarge the window, and the problem disappears when the application is open. But once I leave the app and re - open, I have the black bars and minimize/maximize again to get the calendar view full-screen. Seems to happen on the screen of my Air and when you are connected to an external monitor.

  Thanks in advance

  

  Hello

  I have the same problem.  I had this bug with 10.11.x for awhile and then he suddenly stopped.

  I don't really know how...  Maybe it was a cleaning with Onyx, but I'm not sure.

  Since the upgrade of 10.11.4 today the bug came back.  I ran Onyx on the system without a bit of luck so far.

  @xryancx: do you have that you have installed a beta version of Mac OS X?  It was my case (El Capitan GM) but I did upgrade to the official, as soon has - it is available on the Mac App Store.

  Some people think that I've noticed is that the bug does not affect view DAILY.

  Step to reproduce:

  1. Calendar launch (you'll get the bug full screen)
  2. Exit full screen
  3. Click on daily view
  4. Return to full screen mode
  5. Calendar of quit smoking
  6. Calendar lunch again (there is no bug with day mode)

• Problem with creating numbered lists the paragraph style...

  I have a numbered list, using "bullets and numbers" paragraph style But I don't know how to get the numbering to work properly.

  If I set the "mode" to "continue from previous" mode, whenever I use this paragraph style continuous numbering since the last issue of the previous list using this style.

  If I put the 'mode' for ' start in ' a number, say '1', then all numbers in the list are this number.

  I want that each list is independent of the final list. The only thing I can understand is to create a new paragraph for each list style, but which does not seem a good way to go.

  I have been exploring for some time but have not been able to understand this.

  Place the cursor inside your paragraph of the list where you want than to restart numbering.

  Choose from the menu:

  Type > bulleted & numbered lists > restart page numbering.

  Torben.

• Y at - it a keyboard shortcut for "close all tabs in the right" and "close other tabs" actions? Thank you.

  Y at - it a keyboard shortcut for "close all tabs in the right" and "close other tabs" actions? Thank you.

  As far as I know that there is no shortcut pre-defined for this task. You can always check for the shortcut available in this list: hotkeys - quickly perform common tasks of Firefox

  However, you can set your own shortcut using this addons: https://addons.mozilla.org/en-US/firefox/addon/customizable-shortcuts/

• My Yahoo cursor has changed to a diamond with a cross in the middle and nothing in the pick - able (?) groups. How can I change back?

  My Yahoo slider went from arrowhead to a diamond with a cross in the middle and nothing in the pick - able (?) groups. How can I change back? 8.1 (latest) Windows and FireFox (latest).

  You're not referring to auto scroll?

  • Tools > Options > advanced > general: navigation: "use autoscrolling".

• I have a second hand iPhone and can't set up as the person he was find my iPhone on the phone and wont let me sign in with my Apple or the password and IE you have to communicate with the person he was and connect with Apple here

  I have a second hand iPhone and cannot configure as the person he was find my iPhone on the phone and wont let me sign in with my Apple or the password and IE to communicate with the person he was and connect you with there Apple ID and then cut to find my iphone. Unfortunately o cannot get in contact with that I had to and now can't activate my phone can anyone help? Is there another way I can get into my new phone

  There is no possible way to turn it off without having to contact the original owner. Nothing whatsoever.

  This is why you should always check if find my iPhone is not activated on a used phone.

• in hotmail, I can't pass on all messages that the coordinates and the message is not transferred to the new email.

  In hotmail, I can't pass on all messages that the coordinates and the message is not transferred to the new email. However, this works in Windows Live Mail. I use Windows 7 64-bit and 64-bit internet.

  Hello Brian,.

  There is a forum located there that is specifically for Windows Live Hotmail problems. Here is the link:
  http://windowslivehelp.com/product.aspx?ProductID=1

• I get to level my windows in Windows 7 PC.  My old PC had CS6, Bridge, and Lightroom installed 5.7.  I want to remove all three of the old and install the new.  How do I do that?

  I get to level my windows in Windows 7 PC.  My old PC had CS6, Bridge, and Lightroom installed 5.7.  I want to remove all three of the old and install the new.  How do I do that?

  First of all make sure you disable / disconnect in order to save the number of activations.

  Click the help menu, and then select disable / disconnect .

  Then you can uninstall in Control Panel uninstall process as normal.

  Later, you can download and install CS 6 app link below:

  Download Creative Suite 6 applications

• to install Indesign on my new computer, but can't. First bought CS2 in 2009 and upgraded to 7.5 in 2011. I have the serial numbers for the two and was able to use it on my last computer. Where should I start?

  to install Indesign on my new computer, but can't. First bought CS2 in 2009 and upgraded to 7.5 in 2011. I have the serial numbers for the two and was able to use it on my last computer. I use Indesign that often but there are some projects that it is good for. Where should I start?

  Lchrichton123 what version of InDesign are specifically keen to install?  You can find links to the installation files for the majority of Adobe Creative software titles of other downloads

• Measure the area and perimeter at the same time

  I tried to measure the area and perimeter at the same time, but couldn't find a way to do it. I need to cover an area and to see the area and perimeter both and two separate measure of drawing lines - one for the area of the other for the perimeter, is going to be quite tedious for me. Is there a way to see the area and perimeter in one fell swoop? I use Adobe Acrobat Professional XI.

  thx for your help

  Please check the doc: http://help.adobe.com/en_US/acrobat/X/pro/using/WS8244FB06-C3F6-40cd-9D95-261B9DAF0070.htm l #WSC59DB518-BBCA-4 d 96-8606 - 7FC19DDC0D38

  Kind regards

  Rave

• How to set different fonts for numbers in the titles and tables of contents

  Hello

  I noticed some people to use a different font for the numbers in the titles and tables of contents to get an extra magic. Is it possible to automate the use of fonts in paragraph styles?

  Oh and suggestions on which fonts would be a good thing for numbers?

  Thank you!

  Furthermore, you must doany of this fancy stuff if you use an OpenType font that made OSF glyphs (and if you are not you will need to set the font as part of your style). Just head on to the style definition and enable OSF there OpenType features section.

• I just got my 14 mailed items.  I have NO card or anything else.  I can't install it following the instructions online. I have no codes or numbers except the bar code.   Help, please.

  I just got my 14 mailed items.  I have NO card or anything else.  I can't install it following the instructions online. I have no codes or numbers except the bar code.   Help, please.

  Hello

  You can search the Redemption Code that would be a 24 digit alphanumeric code, you may have received or will need to get to the place where you buy first or Photoshop elements 14 and can access the following link to get the instructions to use the code to get the series license key to activate the product.

  Redemption code help

  If you're still having problems getting the series license key, you can contact Adobe customer service to get the license key of series.

  Contact the customer service

  You can also access the following link to download installers for first 14 elements or Photoshop elements 14 accordingly.

  Download Adobe Premiere Elements 14, 10, 11, 12, 13

  Download Photoshop Elements | 10, 12, 14, 11, 13

  Thank you.

• Measure the current and voltage using DMM sharing a port

  I want to measure pressure several times on a pcb, where I connect the ports of digital multimeters to the card using simple cards. Switching between the different voltages is done using simple. If the black port of DMM (the second from the top photo) is connected to the Earth to give the measure correct volt.

  

  And then I want to measure current through different lines. The problem is here. Given that two measurement types share a port, how do I get the correct voltage and current measurement? The second port of top would be grounded, so I can't use the method of measuring the voltage across the line through a resistance with a known value, since then the second port must not be connected to the ground. How can I use the current state of the DMM measurement? How measure current? Are there examples of this? Tried looking through manuals, but could not find the good starting points.

  

  so I can't use the method of measuring the voltage across the line through a resistance with a known value, since then the second port must not be connected to the ground.

  On all of my games to test I have to mux my land of the signal along with the salvation of my signals.

  All my mux test sets are set up for the topology 2-wire because there is no other way to do it without the weak side of switch also.