button that increments and that erases

Similar Questions

• When I turn on my computer, it gets stuck on the ultra-portable gigabyte 3 screen and custom which leave me there 2 hours still no luck the only button that works are TAB rebooting too

  Original title: stuck

  When I turn on my computer, it gets stuck on ultra-portable gigabyte 3 screen and custom wide movement which I gave 2 hours still no luck the only button that works are TAB restart too it can someone help please

  Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

• Hello, I have Wacom product code in Exchange for buying one. On the CC here there is a button that says "Download" (and not "download trial"), so it seems for the status. But when I press it it says download started, but in fact it didn't.

  Hello, I have Wacom product code in Exchange for buying one. On the CC here there is a button that says "Download" (and not "download trial"), so it seems for the status. But when I press it it says download started, but in fact it didn't. What seems to be the problem?

  Hi Lex % 20Draijer,

  You can try the same thing using a different browser.

  or you can download Creative Cloud via https://www.adobe.com/creativecloud/desktop-app.html

  You can also see help document https://helpx.adobe.com/creative-cloud/help/manage-apps-services-desktop.html

  Hope this will help.

• Hi I'm window7 user, I bought a creative cloud for students and teachers. but all the downloadable test app. That's why I tried 'buy now' button, "that assign the right to use" CC redownloading but "unlicensed" pop up. Help me.

  Hi I'm window7 user, I bought a creative cloud for students and teachers. but all the downloadable test app. That's why I tried 'buy now' button, "that assign the right to use" CC redownloading but "unlicensed" pop up. Help me.

  Hi decoen,.

  Your subscription is activate kindly try to disconnect from Creative Cloud app and reconnect.

  Please consult Creative Cloud applications unexpectedly back in the test mode. CCM, CS6

  Troubleshooting FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?

  It could be useful!

  Rayyan

• Is it possible to create a standard form which can be sent by email to anyone and once filled by the receiver, have a button that clicks on the receiver and the form is encrypted and attached it would open up an email to the sender and a built-in admin pa

  Is it possible to create a standard form which can be sent by email to anyone and once filled by the receiver, have a button that clicks on the receiver and the form is encrypted and attached to an e-mail to the sender and a built-in admin password it open?

  Hello Graphicsguy123,

  You can get the workflow above using the Widget feature. Here is the link for reference:

  https://helpx.Adobe.com/document-cloud/help/create-widgets.html

  -Usman

• HTMLResources PDF shows with a button down refresh that erases just the page. Can it be resolved, thank you.

  HTMLResources PDF shows with a button down refresh that erases just the page. Can it be resolved, thank you.

  These files are loaded in the web browser of iOS. We have no control over the behavior of how it makes or the buttons do, unfortunately.

  Neil

• Hello... I have a subscription plan on CC and notified just updates are available, so I've updated bridge CC of PS, CC2014 PS and Lightroom 5. All updates have been successful but now CC PS displays a button that says trial start. All applications say ' d

  Hello... I have a subscription plan on CC and notified just updates are available, so I've updated bridge CC of PS, CC2014 PS and Lightroom 5. All updates have been successful but now CC PS displays a button that says trial start. All applications say ' day '. I'm on a Macbook Pro running the Mavericks. All advice appreciated. Thank you

  You can go to help > disconnect... restart PS and if you see "buy this product", click that and connect.

  You can also disconnect from Creative Cloud Desktop app (gear icon > account preferences > Déconnexion restart your computer and log in.)

  Ask in the forum of creative cloud Adobe Creative Cloud

  So those who fail. You must contact the Support by chat or phone

  Contact the customer service

  Gene

• Creating a button that highlights himself and another object

  Hi all

  I have a specific function, I am applying for my InDesign document for export to interactive PDF and SWF/html format.
  The function that I am creating is:
  I have a picture of a typical WYSIWYG toolbar. I created highlight buttons that sit on top of each icon in the image. When the reader hovers over this image of an icon (with the cursor) I want it highlight and also a piece of text lower on the page to highlight as well (which is a definition and an explanation of the icon). So I want the reversal of my first button action to also trigger another action, which is to highlight a piece of text somewhere else on the page. I managed to get so I put the cursor on the first button (icon image), it highlights, and the text below the page. But this isn't quite what I want. I want the text already exists, then highlight. Basically I want the two buttons to be connected. So that whenever I have fly over a part of the image of a created button, it will highlight, and a piece of exploratory text highlight simultaneously elsewhere on the page. A bit like an infographic. It is surely possible?

  Thanks in advance for your help.

  Generally, the animations as this is to export a SWF file are better be done in Adobe Flash.

  In Indesign that kind of market, too. Only for export as SWF, you can assign to the action "go to the State." For a text block, you can assign different status, where the 1st State would be 'normal' and the 2nd status would be "highlighted". Highlighted applies to the object "text frame", so that you can assign a contour or background. Better than nothing.

  Example: Dropbox - test_highlight.indd

• How can I make a button that presses that the object appears and the second press the object disappear

  Hello

  I'm quite new to flash programming, and I don't know how I can make a button that will make the object appear and disappear. Up to now, I have this code for calling:

  (press)

  {

  _root.top1.gotoAndStop (2);

  _root. Topp.gotoAndStop (2);

  _root. MM1.gotoAndStop (2);

  _root. M1.gotoAndStop (2);

  }

  but where I'm stuck.

  Thank you for your help

  What you can do, it's the object _visible property allows you to appear and disappear, or more correctly, use the _visible property opoosite.  You should not put the code 'on' objects, keep it in the timeline.

  If the 'object' is the name of the instance of the object you want to fail over, and then in the code to the timeline you can use...

  Object._visible = false;  First, the object is invisible

  yourButtonName.onRelease = function() {}

  Object._visible =! object._visible;

  }

  Only one line in the function sets _visible to be opposite of what it currently is.

• How to target the buttons that are nested by 2 levels and one more thing...

  OK I'm going.  The link below, this is what I deal with

  http://clienttestsite.X10.MX/beta/garage.swf

  The garage door has a chevrolet logo that is thrilling. I know not how to make buttons but I need the garage door to become a button when you click on the animation plays instead of playing automatically.

  The upper part of the chest of the tool will be a button that plays the animation backwards and the drawers are the buttons that open to an e-mail for each form.  But I do not know how to target those buttons because they are nested two levels below the main timeline.

  In the case where he changes the way to proceed, once completed this film will be imported in another.

  Help, please!

  Thanks in advance.

  As long as the object that you want to make clickable is an object with an instance name (movieclip, button, etc.) you can make it work like a button.  If you know how the code for the buttons, then this should be everything you need to know to make the garage door a clickable object.

  Target buttons that are nested you can use the point rating to target... Since you did not identify the details of nesting, here's how it goes mainly...

  Toolchest.Drawers.drawer1.addEventListener(...etc)

• Merger of option buttons that are on separate pages and contained in the same subform

  My question can best be described as follows:

  1. I have a two page (form) document... PAGE A and PAGE B, which are considered as subforms.

  2 page A is set on "flowed - high to low" and has a total of 4 pages when rendered.

  3 A page PAGE 1 contains a group of buttons radio Page 2 contains also a group of radio buttons that should be part of the radio group on page 1, but due to the design running to a second page, it does not.

  4. in view of the foregoing, I am looking for a way to "merge" the games of buttons two radio one, while they remain on separate pages. I know you can merge the Group of exclusive radio buttons that are on the SAME page, but I did not understand how to proceed when they reside on different pages. At first, I was able to do work by giving the two groups of radio the same name and the same parameter of overall liaison, but it became a question with question #5 below.

  5 PAGE also has an ' Add' button which creates a new instance of A PAGE, when you press on. Having the option button global value binding, it automatically value groups radio every time that a new instance of the subform is/has been created... who must be provided.

  The question now is... is there a way to separate radio button group merge two that are on separate pages and they have still work properly as new instances of the subform are created?

  You can probably achieve this by writing script...

  If you want to exclude two radio buttons that are on separate pages:

  (1) change them boxes. and bottom of properties...

  Appearance: Solid circle

  Check the Style: Circle.

  In this way they looks like you are using a radio button.

  (2) write the script to the Click event of the checkbox to disable the check box on the second page.

  Page2.CheckBox2.RawValue = 0; (Or what ever you want when it is not checked.

  (3) Similarly, write code in the Click event of the checkbox in the second page.

  Page1.CheckBox1.RawValue = 0; (Or what ever you want when it is not checked.

  (4) write the code below in the initialization event of each check box, as below...

  The Initialize event Page1.checkBox1

  If (this.rawValue == "1") {//(Or what ever value you want when it is checked.

  Page2.CheckBox2.RawValue = 0;

  }

  The Initialize event Page2.checkBox1

  If (this.rawValue == "1") {//(Or what ever value you want when it is checked.

  Page1.CheckBox1.RawValue = 0;

  }

  Thank you

  Srini

• A single button that deletes and adds MCs

  I am trying to create a button that, when clicked first, will add a MC to the scene. Then, on the second and subsequent clicks delete the existing MC and replace it with a new one. The code I use is:

  Stop();

  Draw1.buttonMode = true;

  Draw1.useHandCursor = true;

  Draw1.addEventListener (MouseEvent.MOUSE_DOWN, dealTheCard);

  var alreadyDrawn:Boolean = false

  function dealTheCard(event:MouseEvent):void {}

  If (alreadyDrawn == true) {}

  this.removeChild (drawnCard);

  trace ("removed card")

  }

  var drawnCard:MovieClip = new deck1();

  alreadyDrawn = true

  addChild (drawnCard);

  drawnCard.x = 60;

  drawnCard.y = 50;

  drawnCard.gotoAndStop (Math.ceil (Math.random () * 11))

  }

  For some reason, I get an error saying:

  TypeError: Error #2007: child parameter must be non-null.

  at flash.display::DisplayObjectContainer/removeChild()

  to encountercards3_fla::MainTimeline/dealTheCard()

  What I am doing wrong? Is there a better way to manage it than what I have above?

  use:

  var drawnCard:MovieClip

  Stop();

  Draw1.buttonMode = true;

  Draw1.useHandCursor = true;

  Draw1.addEventListener (MouseEvent.MOUSE_DOWN, dealTheCard);

  var alreadyDrawn:Boolean = false

  function dealTheCard(event:MouseEvent):void {}

  If (alreadyDrawn == true) {}

  this.removeChild (drawnCard);

  trace ("removed card")

  }

  drawnCard = new deck1();

  alreadyDrawn = true

  addChild (drawnCard);

  drawnCard.x = 60;

  drawnCard.y = 50;

  drawnCard.gotoAndStop (Math.ceil (Math.random () * 11))

  }

• Dynamically place video clip on the corner and the overall position with a mouse click (button) that is always running.

  Anyone know the code to find the global positioning of the coordinates X and Y of a click of a button which turns constantly,
  then the code when you click the button, it displays a clip on the top-(position de x et y lorsque vous cliquez dessus) to the angle that you clicked (so the buttons are always rotating so others can click on them where they are)

  to explain the context, I am designing a model to the top of an interactive round table
  When someone approaches her and click on one of the buttons that move, it reads where the person has clicked on it and open a new box (video clip) where they have clicked on it (on the corner) so is not backwards if you're upstairs.

  I have included my .fla file that shows the four navigation buttons and a small diagram
  explain what I'm trying to do.

  you don't have a class named MethodAnimalMC.

• How can I see the arrow button that showed the recent history of a same tab (next to the buttons next and previous)?

  for example, if I searched word on google, then clicked on a page of results, then inside this page, I entered a link, etc if I wanted to 'go back' directly to the instance of google search I could click on the arrow button and I would be able to choose this exact moment instead of click the 'back' several times until I reached the desired past page

  The arrow to open the history tab of the previous buttons and following was removed in Firefox 4 and later versions.

  Use one of the following methods to open the tab history list:

  • Right-click on the back or next button
  • Press and hold the left button of the mouse on the active back or forward button until the list opens

  You can watch this extension:

  • Backward forward history Dropdown: https://addons.mozilla.org/firefox/addon/backforedrop/

• How to increment and decrement a counter with a single button

  Is there anyway you can increment and decrement a counter using only one button?

  I want this counter in place so that when I leave the stage and go back to it, the visibility of my button will remain the same because of being linked to the meter number.

  What would be the best way to implement that it doesn't work when I do it this way.

  function show_hide_MC(evt:MouseEvent):void {}

  MC.visible =! MC.visible;

  (Counter = 0) = (counter = 1);

  }

  btn.addEventListener (MouseEvent.CLICK, show_hide_MC);

  Thanks in advance!

  You can use a Boolean value (true/false) rather than a meter to keep track / affecting visibility.  You can use the counter simply to determine if you are starting the file or not.   When you click this button, you set the mc.visible property, and then assign the Boolean value of the visible property of the mc.

  var mcVisible:Boolean;    These two variables need to extend the length off the coast of the timeline
  var int count;

  if(Count == 0) {/ / you just started things so set up}
  mcVisible = mc.visible;
  Count += 1;
  } else {}
  MC.visible = mcVisible; you refer then set the visibility of the mc
  }

  function show_hide_MC(evt:MouseEvent):void {}
  MC.visible =! MC.visible; Toggle visibility
  mcVisible = mc.visible;    Remember how you left it
  }

  You can just use the number of establishments, incrementing every time that you click the button and using the module to determine if it has been clicked on an even number of times compared to an odd number of times, and then have a conditional that tests, which affects visibility... something like...

  var int count;           will start with a default value of 0

  We need to increase the length of the timeline

  If (count %2 == 0) {/ / this is the same value}
  MC. Visible = true;
  } else {/ / this is an odd value}
  MC. Visible = false;

  }

  function show_hide_MC(evt:MouseEvent):void {}
  MC.visible =! MC.visible; Toggle visibility
  Count += 1;

  }