Button to remove all empty lines

Similar Questions

• I still have not found "help" to tell me how to remove all the lines and columns beyond those needed for my spreadsheet.

  I used several worksheets.  More allows me to specify the rows/columns and then delete them.  This is to remove all the lines/columns beyond those set up and formatted for my spreadsheet.   I tried many ways to remove all additional lines/columns, but without success.  I even took the time to scroll down/on to highlight all the unnecessary lines and columns, but they do not remove it.
  Any suggestions?  I used spreadsheets most allow me to specify the number of rows/columns for my worksheet

  You can ask your question in the office | Excel Forum because it is not really a problem of Windows XP performance and maintenance.

  Office | Excel

  http://answers.Microsoft.com/en-us/Office/Forum/Excel

  Also, providing specific information may help to get a faster response or better, such as the version of Office or Excel? version of Windows XP? Home, Pro, 32-bit or 64-bit.

  I hope this helps.

• y at - it a button to remove all the nuances that are not used in an file?

  Hey all,.

  I was wondering is there a button that removes all the nuances that are not used in an illustrator file?

  Any help would be great

  Look in the Actions Panel. It should be an action he who says to remove all unused items in the Panel.

  

• Is there a button that removes all colors fill in a single layer?

  I was wondering if there was a quick way to remove all fill colors in a single layer, which leaves only the contour lines. This is for Illustrator CS5. Thank you

  sinsenest,

  How about clicking on the layer in the layers palette to select the entire document in it, then activate/selection of the fill box in the Toolbox and clicking None?

• Delete the command button to remove the particular line of VO

  Hello
  
  I dragged & tomb6e a VO jspx page as a table, the data control palette dragged delete operation as a button on the table as the last column.
  By pressing the button Delete, that is, remove top row of VO. I want to remove the delete button w.r.t. specific line on the list of columns...?
  
  
  Kind regards.

  Can you confirm if the property table in your bed jsff/jspx selectionListener -
  #{bindings. { . collectionModel.makeCurrent}

• Replace or remove all single line breaks in a Blob

  Hello
  
  I want to remove/replace all new simple lines (NOT the carriage return / new line) in a BLOB.
  
  I tried to convert the BLOB in a clob, and then replace all occurrences of new lines of simple with the function replace (for example replace (clob, 10),)
  I even cut the clob into small pieces of varchar2 and tried to apply the function replace etc., but without success!
  
  I'd be happy if someone could give me a tip how I could fix this problem.
  
  I use
  Request 4.1.0.00.32 Express on
  Oracle 10g (10.2.0.4.0 - 64 bit)
  
  Thank you
  Johnny

  Johnny Be Good wrote:
  Hi Paul,.

  the answer to your first question is simple. I use a blob instead of a clob object because I download a file (csv) using an element "Browse file".
  The file is then stored in FLOWS_FILES. WWV_FLOW_FILE_OBJECTS$ (wwv_flow_files) that stores the file in a blob (blob_content) column.

  What to do now is to store the contents of the BLOB to a file in a directory in order to to use as an external file.
  After this, I question the external file and merge the contents into a normal table within the database.

  The problem I have now is that sometimes downloaded csv files have 'broken data sets' in the way that a line (a single dataset), which was divided into
  two or more rows (with a single line break at the end of each line instead of a carriagereturn/linefeed to the normal lines).
  Sometimes, when the lines matching/data sets contain a very large text (e.g. 3000 characters) in a single column and MS excel (the tool used to record the original excel in csv file) can not handle this long texts of a column and breaks the content of a line into multiple lines in a cell.

  However, I need to "Break" the broken data sets in the blob downloaded by removing (or replace) single line breaks, which are an indication of a split data set.

  In view of this process. I converted to CLOB BLOB when the file is extracted from APEX_APPLICATION_FILES, remove the EPA of the problem, and then write in the file system as a CLOB.

  I tried to do by converting the BLOB in a clob, for example with this function:

  A function like this is reinventing the wheel. 10g comes with dbms_lob.convertToClob (see above).

  And after conversion, trying to replace all the occurrences of single line within this clob breaks, for example with this code:

  l_clob := replaceClob(l_clob,chr(10),' ');
  

  Who will replace all the LFs, whether or not they are in CR/LF pairs. Use regexp_replace/regular expressions to exclude EPA following a CR (see above).

  "Without success" means, that the line breaks have not been replaced. I tried several ways as delete (replace without a third parameter and the corresponding function), replacement (for example with a white) etc. !

  I even tried to apply the function of standard replacement for varchars on a clob that I read somewhere that it is supported in 10g and apex 4.1 but with the same result.

  I think that you have been making life difficult for yourself. Everything that seems to involve more (ineffective) writing code as necessary. Everything you need is built into 10g (it seems that you could use the obsolete references?)

  I hope I could explain the question a bit better now and would appreciate it if you had a starting point for me.

  Should have what you need in the above examples.

• How to remove empty lines of chain between the relevant data?

  I have problems with the removal of empty lines of final my data output string.  I know this is simple to do, but I'm stuck in the same train of thought.  The file is a converted hex file that is written in a series of recordings.  Convert lines it is result in fa all that data should be deleted and the number of records adjusted accordingly.  I have the code to take the file, convert, delete all of the records with F and adjust the number of files, but I'm left with a gap in my file no matter my approach I can't remove the empty spaces regularly.  I have attached the file with spaces and the goal is to remove the spaces between the blocks of code, and spaces is not always in the same direction.  Thanks for any help.  If needed I can join the code I already developed if necessary.

  Darrick

  You can read the file line by line and write back only if the length of the string <> 0.  (or maybe <> 1 in the case of the character line appears in the string to a blank line.)

  However, there is probably a way to change the code you have now so that he does not write blank lines.  Without seeing the code, it is difficult to help.

• Remove all lines except 10 random lines

  Hello
  
  How to remove all the lines in the JOBS table except 10 lines at random?
  
  Someone asked him before (not here...): http://stackoverflow.com/questions/10820105/t-sql-delete-except-top-1
  
  but I didn't get the answer, and I don't think it will work in PL/SQL.
  
  If the answer to StackOverflow's works in PL/SQL, I will be happy if someone explains me with a better example.
  
  If the answer to StackOverflow does'nt work in PL/SQL, I will be happy if somebody give me an example.
  
  Thank you!

  Try this

  delete from jobs where rowid not in (select rowid from jobs where rownum <= 10)
  

• Script to remove all rows from a table except the first

  Please see the screenshots for the question/radio button I'm scripting.  If 'No' is clicked, I want to delete all lines except the first.  Therefore, if the first user clicks Yes, adds a bunch of lines and then click on no, I want all the extra lines should be deleted.  I use the script below, but it removes only half of the lines at a time.  I have to click No. 2 - 3 times to remove all the lines.  Appreciate any help!

  // remove extra rows that may have been added
  var rowCount = Page2.UserList.Table1._RowUserName.count;
  for (var i=0; i<rowCount; i++) {
    Page2.UserList.Table1._RowUserName.removeInstance(i);
  }
  
  

  

  

  Hello

  You can directly use the method setInstances of the instanceManager as follows:

  Page2.userlist.Table1._RowUsername.setInstances (1);

  I hope this will help you!

• Button to remove several buttons?

  Hi all.  I have a form that contains a hidden button to generate multiple pages based on the original page.  With the help of MVP George Johnson, he showed me how to create a guest user to ask how many pages the user needs to reproduce.  Since most of the time, which will be 200 pages, I now 200 buttons sitting over there.  Given that this form will be placed in nature, I need a way to remove those spawn buttons when the document of several pages has been created.  Basically, I just quickly create a button that removes all 200 of the Rogue buttons.  The problem is, each button has a single domain based on the page name, it has been placed on (e.g. "P1. Temp1.button1').  How to write the code that will ignore the page number ("P1"), as such and concentrate on the "Temp1.Button1" or even just "Button1", so that all the buttons are selected for deletion?

  My apologies if this is a recruit in question, but let's face it, just, I revealed my rookie status!  Any help out there?

  Thank you

  Randy

  Place it just after the code that I showed to come after. I have posted a fragment of the script that you just posted, it wasn't supposed to be the entire script.

• Remove empty lines in the merged table

  I'm looking for a script that will find and remove empty lines from a table that contains fields of fusion.

  I have a table of data with about 800 cases. This table is used to merge a page report which shows the various components of the employee's income. There are about 20 lines in the table and 5 columns. I apply the merge fields to a table in my .indd file and merging works perfectly. However, there are several features/components of income who share not all employees. Therefore, all pages of the 800-page report contains several blank lines should I have deleted so that the remaining data lines to snuggle up to each other.

  I need a script that will find blank lines in an .indd table and delete them. I found the script that did this and works perfectly on an ordinary table with blank lines. However, it seems that a table cell that contains a merge field (< < myField > >) is not necessarily 'empty', even if the data in this field is Null. I found that after the merger, I can highlight a blank line, press DELETE, run the script, and the line disappears, as needed. But it manually thousands of times would frustrate the purpose of the script. Also note that I've rubbed my data file to ensure that no hidden formulas, characters or spaces. The "Remove blank lines for empty fields" option does not work on the fields in the table (it seems to me. If I'm wrong, let me know).

  It seems that I really need script which will remove references to empty merge fields after the merger. I could run and then my other script.

  I have spent hours on this and hope someone can point me in the direction of a solution.

  Thank you!

  You can remove the markers of merge field by doing a search and replace of TEXT PLAIN for and replace it with nothing. That should allow your script to work.

• How to copy/paste the text box anchor to its anchor text and remove all checkpoints empty?

  Hi all

  I have a document of a few pages, but a story. The right column is the area of main text and on many places, anchored text boxes are placed which appears on the left column, as shown below.

  I want the text of each text box anchor to cut of his place and sticking to its point of insertion/anchor and remove all of the empty boxes of anchored.

  I'm trying since this morning but I was able to get the anchor object reference. Any help on how to start with will be useful.

  Marie rosine

  

  OK, let's say you have a main text (not rooted) box and three text boxes that are anchored to the text it contains. One is anchored with text, the second is not anchored and the third argument is empty (I won't get into the anchor vs custom anchor line given that you mention in your message).

  Scroll us through the items on the page:

  function main(){
    var myDoc = app.activeDocument;
    var myPages = myDoc.pages.everyItem().getElements();
    for (var i = 0; i < myPages.length; i++){
    {
      var myPage = myPages[i];
      //Checks that the page is valid, and that it is not a master page. If either is true, skips to the next page.
      if (myPage.isValid == false) continue;
      if (myPage.parent instanceof MasterSpread) continue;
      var myItems = myPage.allPageItems;
      for (var j = 0; j < myItems.length; j++){
        //Current item.
        var myItem = myItems[j];
        //If myItem doesn't have a Character parent, it is not anchored.
        //The first and third text frames would fail this test.
        if (!(myItem.parent instanceof Character)) continue;
        //We only care about text frames.
        if (!(myItem instanceof TextFrame)) continue;
        //I think the only way this would happen would be if you had an image or
        //something else unexpected within the frame. I check for it so no content
        //is inadvertently lost.
        else if (myItem.texts.length > 1) continue;
        //If we're still in this iteration of the loop, all qualifications are met.
        //Flatten the text frame.
        //I don't use layers that often so, to me, flatten makes sense. You may want
        //to use a different term if there's a chance for confusion.
        flattenItem(myItem);
       }
     }
  }
  
  function flattenItem(funcItem)
  {
       //Hold onto the anchor character.
      var myParent = funcItem.parent;
       //Duplicate the text from within the frame so that it appears right after the anchor.
       //There may be other methods, but this works for me. I try to avoid copy/paste
       //so as not to deal with any clipboard mishaps. I added a check in case of empties.
       if (funcItem.texts.length > 0){funcItem.texts[0].duplicate(LocationOptions.AFTER, myParent.insertionPoints[0]);}
       //Replace the anchor character itself with a space (or whatever) which also
       //deletes the text frame it was anchoring.
      myParent.contents = " ";
  }
  

  I guess the takeaway is perhaps you aren't looking at the main text block and then check if anything it is anchored. You are watching each text block and find out if it is anchored. That's my approach, anyway.

• Firefox crashes in typing or by clicking check box or the radio button, even with all the plugins / extensions removed. Check with many types of malware scanners.

  Firefox crashes in typing or by clicking check box or the radio button, even with all the plugins / extensions disabled, then deleted. Sometimes it hangs for five minutes. I checked the PC with several types of scanners of evil-ware, but none to be found. All hidden and deleted cookies, all DELETED & extension plugins. Remove all instances of Firefox PC and registry, then restored to bookmarks. The only thing that I did not is to remove and reinstall not my favorites.
  Windows Vista (yes I know) and FF 13.0.1

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/
  • https://support.Mozilla.org/KB/how-do-i-upgrade-my-graphics-drivers
  • http://KB.mozillazine.org/Firefox_hangs
  • https://support.Mozilla.org/KB/Firefox+hangs

• My buttons 'Remove Cookie' and 'Remove all Cookies' do not work.

  My 'Remove Cookie' button does not work. When I click on 'Remove all Cookies', it seems that it removes cookies, but when I click on "show Cookies... "the cookies back.

  Hello

  Please check if this occurs in Safe Mode

  Extensions of the issues

  Troubleshooting Extensions and themes

  Uninstalling the modules

  Uninstalling toolbars

• Avoid writing empty lines or remove the empty string between data lines

  Hello

  I have this problem...  I write as a 4 x 4 witch table comes from a graph of intensity in a file. But when I write, regardless of the method that I use out it somehow unusable when I try to read more later.

  Right now I got change for a 1 x 16 table witch I later convert back to 4 x 4 again shown in the graph of the intensity.

  The problem is that I have empty lines between the data I want to remove to display correctly.

  Maybe to be clear in my explanation I will post screenshots of how I write and how I like to read...

  

  Can someone help me?

  Thank you!

  Antonio

  Why do you use a loop to create a string to write to the file? In LabVIEW 8.x writing on a spreadsheet file is polymorphic, so you can select the instance of 'Double' and simply connect your table 2D directly to it, without a loop or anything like that. On playback, even select the instance 'Double' for your return values exactly as you wrote them.