By specifying the path network topology for flat files

Similar Questions

• Specify the path to file report with Expression

  TS201x help under "Specifying report file paths by Expression" talking with a number of macros various, but starts at the page that shows how to use FileGlobals also. When you specify the expression (... > specify the path file of report by Expression > Expression browser), I would like to combine macros with FileGlobals, but none of the FileGlobals are listed is available. The expression builder has access to the StationGlobals however, but not in the FileGlobals.

  Is there a workaround solution, or at least an explanation of this behavior?

  See you soon

  I think you found a bug in the documentation.  In the process of old models, you can use the FileGlobals of the process model as that sentence States.  Now that they moved to Plugins I don't think that this is no longer true.  You may need to go with a StationGlobal on it.

  Or you can cancel the ReportOptions recall and change the Parameters.ReportOptions.ReportFileSequentialModelExpression variable to include the information in your customer file.  So, basically, to define a placeholder in your expression in the dialog box options report.  Then in the callback to use the SearAndReplace method to replace the placeholder with the specific data.  It worked for me when I tested it.  The nice thing about this way, is that you don't have to manage the StationGlobals.

  Hope this helps,

• Impossible to delete the "cannot find the specified file. Be sure to only specify the path and the correct name?

  For sum reason my computer just started to do the following when I try and delete a file or move a file from one place to the other.

  I am the administrator and the file is there.

  Failed to remove "" cannot find the specified file. Be sure to only specify the path name and filre coeerct.

  Help!

  Perry

  Hi KAD Rebar,.

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. Are you having similar problem with all the files you are trying to move or remove it from the computer?
  4. You have security software installed on the computer?

  Method 1

  See the link below and run the Fixit tool available, check if it helps.

  Diagnose and repair Windows files and folders problems automatically

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/

   

  Method 2

  If the previous step fails, then I suggest that you start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  If the problem does not persist in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• How to read a file .xls to a situation identical to the sequence of the file without specifying the path?

  Hello

  I am trying to open a file .xls existing from the same location as the test sequence file. Can you TestStand search in the location of the sequence input file test file and then select the if present? Also, can we store the output file in the same place without specifying the path to the code?

  Example:

  Input.xls-> input file to the test sequence that must be read.

  Output.xls-> output file created by the test sequence.

  Test.SEQ-> the test sequence that reads Input.xls and creates Output.xls.

  If Test.seq and Input.xls are present instead of D:\Test\, the Test.seq code can be modified to pick up the Input.xls automatically without specifying the path? In addition, can Output.xls be created to D:\Test\ without specifying the path?

  Thank you

  Corinne

  Hi Isabelle,.

  Yes, this can be done. You can get the path to the current sequence file using RunState.SequenceFile.Path. Then find and remove the last '-' using the string functions to get just the path. You can then use this path to manage your files Input.xls and Output.xls.

  -Jack

• upgrade to windows 10, cannot open itunes, it opened the first time, and imported all my songs, but does not open a second time, get the error that the path is not correct and file not found

  upgrade to windows 10, cannot open itunes, it opened the first time, and imported all my songs, but does not open a second time, get the error that the path is not correct and file not found

  Try to repair the security permissions for iTunes for Windows and the empty/corrupted after upgrade/crash iTunes library.

  TT2

• How to specify the path for ar, gcc, etc...

  Hello
  
  According to Metalink Note: 416305.1 : Installation of oracle Applications and Notes of version 12 (12.0.4) for Linux (64-bit) upgrade
  
  Software requirements
  The following maintenance tools must be installed on all machines and their locations specified in the path of the account running a quick installation and the path on accounts that will hold the database layer and the application layer of file systems. (For all the Linux 64-bit operating systems.)
  
  AR
  CCG
  g ++
  Mrs.
  LD
  linux32
  do
  X display server
  
  I did not understand this para, please tell me how to specify paths for these tools.

  Hello

  You must make sure that you can run these commands. Find the files and verify that the path is set your path.

  To check your current path, issue of "echo $PATH".

  To add a new path to your current path, issuing "export : $PATH.

  Kind regards
  Hussein

• Does not not the path network in a reservation

  Hello

  I'm trying to set up the new booking. In a new tab of book storage, all storage LUNS are appearing, but in the network tab, it is to show that the group port DvS on which I configured my device and IaaS Server vRA. It doesn't show any other group port. I configured 4 groups of ports in my DvS with names, vLAN100, vLAN101, vLAN102 and vLAN103. I use for my device and IaaS vLAN100 and it is the only group of ports in the network path are not the other 3. Please advise and guide how to solve this problem.

  Thanks in advance.

  Solved the problem. Port DvS groups were not properly mapped to the hosts in the cluster. A mapped and ran the data collection, all him vLAN appeared successfully in the reservation network tab.

• Is there a way to specify the static IP address for deployment EGGS in the ovftool command?

  Hello

  I'm trying to deploy EGGS using ovftool. I see the option - network and - net available for the selection of the network by name, although I wasn't able to find a way to assign a static IP address in the ovftool command itself. Something like - ip0 = 10.10.10.10. Is there a way we can do that? User interface when we deploy an OVA, we have available to provide IP address, gateway, DNS and network mask.

  Thank you

  Hello, vPupil-

  If the ovf/eggs is created to have definable properties, as an IP of the machine, you can use the "-prop ' parameter to ovftool.exe.

  By literature ( http://www.vmware.com/support/developer/ovf/ovf20/ovftool_201_userguide.pdf), is the syntax to set a property:

  --prop:=
  

  It is near the bottom of page 24, as well as an example.

  To see if the ovf/eggs that you are using has configurable options, you can use ovftool.exe in mode "probe" (page 25).  Just issue the command with only one source, no target, as such:

  > ovftool.exe myAppliance.ovf
  

  This should generate the results of the probe, which should list all configurable properties, including their 'key '.  This key is what you use with the "-prop" parameter.  In the example of probe on pages 25-26, the FVO has two properties, 'db - ip' and 'ws - ip ".  Then you should be able to specify values for these properties by adding the following to your ovftool order:

  ... --prop:db-ip=10.10.10.10 --prop:ws-ip=10.10.10.11 ...
  

  How does do for you?

• create a tablespace without specifying the path to the data file and the name

  Hello
  
  Is it possible to create a tablespace without specifying the name and the path of the data file.
  
  For example: just specify the name of the tablespace and the size of the data file, the data file must be created in a default location with the default name? Is this possible?

  user13364377 wrote:
  Hello

  Is it possible to create a tablespace without specifying the name and the path of the data file.

  For example: just specify the name of the tablespace and the size of the data file, the data file must be created in a default location with the default name? Is this possible?

  The use of the files managed by Oracle
  Internally, Oracle uses standard file system interfaces to create and delete files if necessary for the following data structures:

  * Tablespaces
  * Online redo logs
  * Control of files

  Through initialization parameters, you specify the directory of file system to use for a particular file type.
  EXAMPLE:
  The following parameters are included in the initialization parameter file:

  DB_CREATE_FILE_DEST = ' / u01/oradata/sample.
  DB_CREATE_ONLINE_LOG_DEST_1 = "/ u02/oradata/sample.
  DB_CREATE_ONLINE_LOG_DEST_2 = ' / u03/oradata/sample.

  The following statement is issued at the SQL prompt:

  SQL > CREATE a DATABASE sample.
  SQL > CREATE TABLESPACE tbs_2 DATAFILE SIZE 400 M;
  SQL > CREATE UNDO TABLESPACE undotbs_1;

  check the link for more information:
  http://download.Oracle.com/docs/CD/B10500_01/server.920/a96521/OMF.htm

• QoS on each device in the path network?

  Hello

  Apologies, as I'm new to QoS, but it's something I can't find a clear answer too,

  I understand the notion of quality of service on the routers, it's usually the field I see QoS easally passing in the form of WAN links tend to be 10 MB/20 MB etc., so we need to prioritize the traffic as these links can congested bandwidth.

  I understand the use of the class / political cards to identify traffic and bandwidth priority, and then apply the service policy to the output interface on the interface that connects to the WAN link.

  We need quality of service on the local network that connects to the Wan? Even switches layer 2? ... is by port, how to identify traffic at the switch level and give priority to it?

  Help, please!

  Thank you

  Disclaimer

  The author of this announcement offers the information in this publication without compensation and with the understanding of the reader that there is no implicit or explicit adequacy or adaptation to any purpose. Information provided is for information purposes only and should not be interpreted as making the professional advice of any kind. Use information from this announcement is only at risk of the reader.

  RESPONSIBILITY

  Any author will be responsible for any wha2tsoever of damage and interest (including, without limitation, damages for loss of use, data or profits) arising out of the use or inability to use the information in the view even if author has been advised of the possibility of such damages.

  Poster

  I'm not a supporter of QoS from end to end, just because you can, either that's what suggests '' the book. ''  There is a cost for their maintenance and QoS implementations, and if done correctly, QoS can degrade service.

  Where you should have QoS is on any interface where forms of congestion it is unfavourable to of the application serve the needs and which may be updated by QoS.  (Sometimes the 'right' solution is more bandwidth, although often more bandwidth is achieved when the quality of service could be a more optimal).

  Often, there are undesirable congestion on WAN interfaces, because as you note, they provide less bandwidth LAN interfaces.  (Also WAN bandwidth is also often more expensive to provide than the LAN bandwidth).

  Placing the QoS on the interfaces that don't really need, it's a bit like buying insurance.  It adds to your "cost", but offers "protection" for the unexpected.  Once again, as if you must buy insurance, for which coverage and cost, QoS implementations should also take into account coverage and expected benefit vs cost.

  So...

  We need quality of service on the local network that connects to the Wan?

  Maybe, maybe not, but also again, often if you do not need effective QoS, LAN to WAN is a common place.

  Even switches layer 2?

  Another maybe, maybe not.

  ... is by port, how to identify traffic at the switch level and give priority to it?

  In fact how depends on the device.

  Often, you have a policy of penetration which examines the traffic, and based on what it "sees" could allow the self marked traffic to go markedly or brand/note traffic according to the needs.

  Device can have the exit policy that determines how the traffic is processed, including priorities, when there is congestion.

  The thing to understand about QoS is to respond to the needs of your traffic, made service by managing the queuing traffic and lozenges.

  QoS often becomes a point of discussion when dealing with VoIP.  However, not all needs of VoIP QoS in all cases and even cases such as data transfers in bulk, could be improved in QoS.

  Unfortunately, QoS corresponds with the old cliché, "can't see the forest for the trees".  Most hardware QoS explains how to treat the 'trees', but does not explain how the forest should be managed.

• [Script / Code sample requests] The Total Network Get for a given set of ESXi hosts or natachasery flow

  Hi all

  I asked this question to Luc rooms (@LucD22) via twitter earlier and it offers to post here... good suggestion.

  Scenario:

  We have a set of ESX host running on hardware of blade, currently using double transmission 10 g out to the Top of Rack Juniper EX4500 switches. I offer you with our next design to be used in the chassis MXL Force10 switches and uplink of a distributed Thorn (or Lagg for 10g or 40g). There was some resistance from the network team saying we owe to full speed for all blades, all the time... I have a strong suspicion of our overall throughput for a given frame is much less than 320gbit... but I want to prove that with solid data.

  We had a follow-up, but they all use averages of 5 minutes (at best), so the transient peaks tend to miss (and I want to capture them if possible).

  What I would do:

  Generate a set of data that I can use to create a stacked line chart (each host or Teddy bear would be a line with each other at each point of data in total also). Probably should separate incoming and outgoing...

  I would like to have the data as granular as possible, in order to capture the 20 seconds on average, calculate averages over a period of Maximum would be ideal for each host. Remember to say a data point every 30 minutes, over a period of X (probably the length of time, the script is running allowed to run to?), maybe a failsafe (x, configurable?)

  However, overall, it probably should summarize each collection point, then calc the max of people for each datapoint (way not to capture two vertices that do not occur at the same time, the inclination data.)

  It may be useful to divide into a new CSV file daily / some-other-small-time, so long

  Other ways to do this:

  Get stats levels to get the values of "maximum" in vCenter to the largest. Ideally not... He puts a reasonable amount of strain on the vCenter DB, more it will produce asymmetrical data by combining the maximum values.

  Thoughts?
  Cnidus

  You are welcome, and as long as there is no "code editor" I will continue to make typos

• How to change the local IP on the virtual NETWORK adapter for Web server address

  Hi all

  I have a physical Windows system, on which I run VMware Workstation 9. Now on VMware I run Ubuntu 12.10 a LAMP for a Web server.
  Problem:
  Now, my local IP address for my NETWORK card virtual (using the Ubuntu one) at the address 192.168.159.7 and my router only emits the 10.0.0.x range IP addresses. So if I want to port forward to the virtual NETWORK adapter that has a 192.168 address, I can't, so my LAMP Web server are not accessible to the outside because the router does not send packets on port 80 to the virtual card... How to fix this?
  The only way I guess that is to be assigned an ip address of 10.0.0.x to the virtual NETWORK adapter?
  But how do I do this?
  I tried to do it on the host from the Windows machine with "get my IP address automatically", but she emits an 192.168 address every time...
  Thank you

  Welcome to the community,

  I guess that the virtual computer is currently configured to "NAT" or "Host-Only' networking! That would explain the 192.168.x.x IP address.

  There are 2 options to be able to access the web server on the virtual computer.

  1. with "NAT" network configured

  In this case forward port 80 to the IP address of the host and configure the port forwarding on the virtual computer in the "Virtual Network Editor. This way you can leave the IP address on the private network of 192 (if it is currently set to NAT)

  2. use "Bridged" network layout

  Reconfigure the virtual NETWORK adapter to the machine virtual networking "Bridged" within the parameters of the virtual machine, assign an IP address from your router network (10.x.x.x) and do the port forwarding on the router directly to the IP address of the virtual machine.

  André

• SDC RTU Modbus - cannot specify the type of query for each register address

  Hi, it's Jose.

  I have try the DSC module to connect with a temperature module, but this, does not meet the MODBUS registers addresses, for example to read the temperature, I should ask a 0 x 03 at address 1001.

  

  But for DSC for a request of 0x03, it expects to addresses like 4000, so since 1000 addresses belongs to coils, SDC makes a request of 0x01

  

  My thermometer has even coils register.

  Is there a way to force the DSC to make specific requests?

  Thank you and best regards

  What happens if you enter the numbers as 400001 401001 or simply?

  Also try to only 1.

  The current Protocol does not transmit the prefix number which he calls a coil (1) or (4) record keeping, (3) registry entry.  (I mixed up to the top of the last two is possible).

  So the device describing the registry with the wrong group of addresses, may not matter.  You just lie to LabVIEW to tell him where he thinks is it supposed to be.

• Look for the path just by showing all files

  Is it possible to configure the LabView brose dialog box to show all files, but only allow the selection of existing paths (such as records of selection only mode)?  I have many paths to choose from and I would like the user to see files within these paths (so they know that they choose a populous path) but I don't want to select these files.

  Thank you

  XL600

  HI xl600,.

  You can use the path of the band when the user select a file and force the value of path.

  I made you a VI.

• HP Deskjet 3830: Printer connected by wireless worked well until someone joined the home network - looking for password now!

  I created my HP Deskjet 3830 yesterday and it worked on wireless connection. At no time was I asked a network security key.

  A colleague joined today to the home network (yesterday I was myself), and requested a key security network - to my surprise I was so.

  I put my wireless network password, and he says that it is evil. I used HP Print and Scan doctor to confirm the password (I guess that's the same thing as a "security key" - it was OK, but I keep being told it's wrong.)

  It is porrible that it is because my setup yesterday wasn't network but without straight wire? Or want to say I'm wrong?

  Other: since yesterday I have not changed anything or even restarted.

  Reset the printer to the default network. Now plug it back to your routers SSID with password. Try now. If Direct wireless is enabled in the printer, turn it off.