cable IDE 39 vs 40 for Lite-on

Maybe a strange question, but I want to buy a Lite-on for my Dimension 8400 DVD burner.  I called Lite-on and they said most of their units accept a 40 pins and I guess the 2084H (recommended by Lite-on for my Dell) must ask the same cable.

The problem is that the cable into my PC accepts only 39 pins.  Y at - it an adapter or cable, which is compatible with my computer?


Tags: Dell Drives

Similar Questions

  • What is the longest cable that you can use for a webcam If you want to move a piece

    What is the longest cable that you can use for a webcam If you want to move a room, you want to use as a granny cam

    I get up to a cable of length more camera more and then peripheral is not is not recognized. I Yawcam program on my computer which is optimal

    for a web camera to use invisably.

    According to the official FAQ USB. page here:

    http://www.usb.org/developers/usbfaq#cab1 ,

    5 m is the maximum length of a USB cable. A lot of points 3 and 4 on the above page dealing with how to deal with scenarios beyond this length.

    Personally, I have only ever went up to 4.8 m and it was with an external hard drive (which had its own separate power supply).

  • How can I get updates for IDE ATA / ATAPI Controller for windows xp pro

    Where can I find drivers updates for IDE ATA / ATAPI Controllers for windows xp pro?

    These are usually Microsoft drivers, and they are as old as the hills, why do you need to update the drivers?  If the Microsoft drivers are not appropriate, then get the drivers from the manufacturer of the motherboard.

    John

  • Need a network Jack (RJ45) cable connector with m/b for Vaio VPCEB37FD

    Hello

    Need a network Jack (RJ45) cable connector with m/b for Vaio VPCEB37FD

    Can you please help?

    nicolashamper,

    The reference is A-1798-909-A.  You can order through parts Sony @ 800-488-7669 (US).

  • is there a download driver for "lite - on SOHW-1633S50c dvd r/rw"?

    OK, I have problems with my DVD R/RW drive. It does not appear in my computer or Device Manager. When I go to regedit it shows dvd cdrom and disk information but there is no less or high filter to remove. also bios does not display the installed drive. I changed the cable that plugs into it too, not the power but this one. My OS is windows xp family. Also, I tried the microsoft fix it program and it did nothing for me. Any help to solve this problem would be great.

    Thanks again,

    Robert Yard

    Hi benny yard.

    1. Did you the latest changes on the computer?
    2. It is the first time that you use the DVD player on the computer?

    That the drive is not detected in the system BIOS, I suggest you contact the manufacturer of the drive for further assistance.

    http://www.liteonodd.com/

  • Need idea of new printer for my continuous ink system

    Hello, my old HP 6510 comes to break, which had been hung to a CIS I liked (refills waiting so want to continue to use this particular CIS).   Looking for ideas on printer of the new HPs that will work with my CIS (HP02/802) Please!

    Regarding my use:

    used printer for a home (mac and PC)

    print a color mixing and pages without color,

    Print and copy about 50 pages a week.

    Must be a good color used for a few photos and graphics printer

    Does not need to be fast but I hate paper jams

    Fax not important but would like to scan

    I am very grateful for your help! I need to buy one as soon as possible

    You could buy a printer of opportunity on ebay, the models here support the HP 02 cartridges:

    Compatible printers (out since July 2005)

    With a volume of printing only fifty pages per week, a CIS system may be exaggerated.  I print on my Officejet 8600 thereon more and have just replaced the cartridges once in eighteen months.

  • Suggestions for auto BB10 - Momentics IDE does not not for PPC files

    After updating my momentics IDE verstion to 2.1, suggestions (ctrl + space) auto works is not for the cpp files. Please help me with this.

    Check on Preferences-> C / C++-> Editor-> Help content-> advanced, that you have enabled.

  • Cable Patch fiber length minimum for MGBSX1

    I want to "stack" some 300 switches gigabit fiber using a pair of MGBSX1 GBIC and one LC to LC cable.

    Is there a length of minimum patch cable supported in this configuration?

    Howard,

    Thank you for posting. You should have no problem using a patch of short fiber between the switches. Just make sure that fiber does not bend too sharply and deteriorate.

  • JDeveloper 11.1.2.3, ADF Faces: need idea of component declarative for table

    Some information:

    I am trying to create a reusable toolbar for the behavior of af: standard table, see screenshot

    http://wesfang.files.WordPress.com/2013/05/DC.jpg


    I had the idea of documentation, Frank has published in the past by
    1. http://www.oracle.com/technetwork/developer-tools/adf/learnmore/001-access-declarative-comp-attr-169113.pdf
    2. Add a new line by programming

    The page of the subsystem of your past in a "MyPageBean" which is a subclass of a 'ArchBean' where all actionlistener operations are defined. The idea here is to minimize the developer customizing when using this component.

    ... <f:facet name="toolbar">             <af:toolbar id="t2">                 <mskcc:basicTransactionToolbar id="btt1" pageBean="#{MyPageBean}" tableId="t1"/>             </af:toolbar> </f:facet> ...

    The table on the page of your default is filed "editable" tabular The developer must change the attribute 'disable' true for all fields of seizure and control components in the table. I would like to remove this step of developer and have rather in an architectural element. All ideas are welcome.

    Hello

    If the table is added in a facet of the declarative component toolbar, then you can access them in your component code declarative. The table has columns as his child, and each column has UI components such as child components. You can access these UI components and programmatically set the disabled property. All you need to know is the 'trigger' of this deactivation point. Can you try and create a custom declarative component impl class and use the method encodes?

    Frank

    Published by: Frank Nimphius, May 16, 2013 09:01

  • I lost most of my music from itunes because of a terrible infection (my own stupidity because I didn't have a backup).  I had an old account to my work, so I contacted support. They said they couldn't help. Someone has an idea? I paid for it.

    My music has been on a computer at work, so I can't access the account.  I talked to the media and they a great buy from this old account but now they say they are unable to move the rest.  That is not meant for me, but they can't do it. I don't remember having a Apple ID at this point here, I just use my email address but it is a private estate, so I can't sign this account more.  All hope is lost?

    If you do not have to keep a backup copy, and then they are gone.

    Sorry

  • What printer cable USB do need me for the HP 2050 j510j?

    No cable, why?

    Hello

    They are of the same type, only different lengths and colors. The connectors at both ends expected lok like this:

    Kind regards.

  • I have no idea where my installation for my operating system discs are... but I need to reinstall a dll that I had my computer off and when he returned to the top needed to fdisk... and when he fixed things that the dll has been corrupted.

    where can I download the dll for windows vista ultimate 64 msxml4.dll?

    I tried to get my installation discs and I can't find them. I tried to contact alienware and they said to contact microsoft.
    I tried to use the features of support, but when it asked me to put in my ID of product of your Web page will not accept for any reason any.

    now what should I do?

    can you send me this dll? my email is * address email is removed from the privacy *.
    I'm fucked without my darn install disks.

    You do not qualify for FREE Microsoft Support as your Vista operating system is preinstalled, with the exception of problems with Vista SP2. () Information about this is provided below.)

    All the support your Vista is the manufacturer of your computer.
    https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

    Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

    Microsoft free support for Vista SP2 at the link above.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

    There is no Vista free download legal available.

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    You can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

    They will tell you how to do this.

    Every computer manufacturer has their way of doing recovery disk/s.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    Save all data, because it will be lost during a clean installation.

    See you soon.

    Mick Murphy - Microsoft partner

  • Reader of CD-R/DVD-ROM (IDE) of K LITE-ON COMBO SOHC 4836 opens not (mechanical)

    I can't use the original CD-R/DVD-ROM drive, because he that is no longer open tray drawer. It's a mechanical problem, I've tried several times unsuccessfully to fixation. It's my only optical drive, and I can't find an IDE drive to replace, because everything I've found so far is SATA not IDE ATA.

    My computer recognizes the drive, but this isn't a software problem, so it can't be fixed with troubleshooting app.

    I went to NewEgg and an engraver of CD/DVD ASUS DRW-241st/BLK/DOWN black SATA 24 X bought last week. It happened a few days ago, and I tried to install it, but he found the new driver has no receiver necessary required power (a cable IDE socket receiver) plug at the rear of the unit. I had to request a RMA from NewEgg number for refund.

    What should I do? I need a CD/DVD drive of work!

    My PC is a 2006 Compaq Presario desktop SR 1930 t CTO, with Windows XP (home edition) operating system.

    Last year I replaced the original with a 480W 300W PSU (has supposedly 'support SATA', but I don't know what that means). I know there is only a single receiver plug on the ASUS drive, and several card receivers on my drive LITE-ON.

    Help, please!

    My bad.  I didn't notice that I've linked drive was just a ROM.

    This small converter looks interesting.  I had not seen this before.  It should work OK if you have peripheral space being tacked on to the back of the drive.  Well done.

  • Inspiron 13 (7352) looking for a burglar to fit smaller locking port security cable

    I am trying to get a cable of anti-theft security for my Dell Inspiron 13 (7352). The lock of Noble (Dell A6451164 part / manufacturer part TZ08) does not fit in the slot. The slot on my Dell Inspiron 13 (7352) measure 0,1875 "(3/16"). "

    No one knows what are the 3rd party (Noble, Kensington or other) or Dell security lock enters the port of locking of my Dell Inspiron 13 (7352)?

    Thank you, John H.

    To all:

    I apologize, as I do not know if this posting correctly. However here is the solution I have thanks to Kensington locks. I contacted the Kensington locks directly and I was able to find and get a security lock which fits with the help of Kensington. Kensington part number is K64637WW (ClickSafe Keyed laptop Lock). www.Kensington.com/.../ClickSafe-Keyed-Laptop-Locks

    To work with the Dell Inspiron 13 (7352) you also part K67973WW (anchor of safety Clicksafe for non-standard security locks). I'm sorry, but I don't know if the K67973WW part comes standard with K64637WW or must be ordered separately.

    Tonight, I found K64637WW (ClickSafe Keyed laptop Lock) on Dell Web site (Dell part A4265154), but again, don't know not if K67973WW (anchor of safety Clicksafe for non-standard security locks) is included. I would like to order directly from Kensington.

    End of Solution *.

    -Dissatisfaction with Dell-

    On the Dell Web site, a feature is listed that the Dell Inspiron 13 has a 'Noble locking slot", but Dell does not part number that works and the Dell Customer Service and Technical Support have no idea which is the good part. If the TZ08 (Dell A6451164 reference) is the correct Noble for the Dell Inspiron 13 (7352) lock then I guess that I have received a defective TZ08 or another party in a bag labeled TZ08. They also sent me a lock combination of Dell (Dell manufacturer: 461-Abdellaoui / manufacturer: P9NG5) who did not.

    -Dissatisfaction with Dell-

  • What cable lock to buy for Satellite Pro P200?

    I have this laptop: http://uk.computers.toshiba-europe.com/innovation/product/Satellite-P200-1K9/145669/

    On the card it says it has a slot for a kensington lock cable, but I can't find the tab compatible options to buy a lock.
    The research generally on the Toshiba site for the cable locks, none of them are listed as being compatible with my particular model.

    Can you help me find the right type it please?

    I'm not 100% sure, but these cables are not designed separately for each laptop brand and you should visit the nearest PC store. I'm sure that you will find this cable here.

    Ask your local Distributor on this subject.

    http://us.Kensington.com/HTML/1434.html

Maybe you are looking for