Calendar view question

Similar Questions

• Failure of the Central Admin Server Event ID 12902 calendar view. A new attempt. (024)

  I get a lot of this event, but there is no info at all in eventid.net

  Log name: Application
  Source: Central Admin Server
  Date: 17/11/2015-09:55:10
  Event ID: 12902
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: SA-SVC01
  Description:
  Calendar view failed. A new attempt. (024)
  The event XML:
  
   
     
      12902
      2
      0
      0 x 80000000000000
     
      203871
      Application
      SA-SVC01
     
   
   
      Calendar view failed. A new attempt. (024)
   
  

  Hello

  Please post your question in the Server TechNet Forums:

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Kind regards

• Calendar view-only and users are unable to change the time.

  We use Windows Server 2003 R2 active directory and group policy.

  Group Policy, we blocked sytem time change but after this timetable can also test block user cannt read calander also

  pls sugget me to resolve this issure

  Calendar view-only and users are unable to change the time.

  Hi sunil77,

  Your question about changes in UAC using Group Policy on Windows Server 2003, it will be better answered by the experts in the Group Policy Forum. Please repost your question to the address provided.

• Spaces of blackBerry Smartphones between times consecutive appointment in calendar view

  I hope someone can help me with this.  When I go back to back (which I have throughout the day), there is a space between them and it drives me crazy.  I can't take a look at my calendar and see the available hours.  I tried to use the view of the order of the day without end of time, but this does not work as well in trying new appointments.  I'd appreciate any help I could get with that.  Thank you.

  Hi self,.

  self wrote:

  Dear Mr. bifocals, (MR. Bifocals is my father, I'm just bifocals)

  Bless you for trying to help me with this.  I was able to get the order of the day see myself earlier, and removing the time from the end of the app'ts has helped a little more.  But I really like being able to watch throughout the day (in daily view), so I can really see what is happening.  I never had a calendar that put unnecessary spaces between sequential appointments. I guess it's a matter of personal preference. I actually like

  the spaces. For me each appointment stands out better.

  I think that the other Blackberry phones do not have this problem.  Is this correct?  You know a way to send the application to Blackberry? I have a curve as well, and the calendar views are the same in both.

  I join the toll-free and e-mail RIM for suggestions.

  Once more, bless you and thanks a lot for your help.  I want to acknowledge your efforts with the congratulations, but I'm not sure what to do about the "resolved" part What do you suggest me? I was hoping that I was missing

  something in the settings and that other users had a resolution. The resolution may be trying all possible points of view and find one you can live with! For me "resolved" means that the issue is resolved, so that part is up to you!

  Warmly,.

  Leigh Ann

  Greetings to you!

  Bifocals

  RIM's toll-free: 877-255-2377

  [email protected]

• BlackBerry Smartphones 6.0 Calendar View

  I have trouble of switching days in the calendar view in the 6.0 software. It was easy to switch between day and now it seems impossible. Any suggestions?

  Make sure that "enable fast entry" is disabled in the General Calendar options.  Then "N" and "P" will work.  Good luck!

• How can you determine what the user watch calendar view (month, week, day, list) the calendar of CSS (5.0)

  We run Apex 5.0.1.00.06 and I would like to add a region to a page, if the user displays the LIST of the CSS calendar view. I can't understand how to determine which view the user displays currently. Is it possible to determine to create a condition to show another region in they are on a particular view?

  BillH104 wrote:

  We run Apex 5.0.1.00.06 and I would like to add a region to a page, if the user displays the LIST of the CSS calendar view. I can't understand how to determine which view the user displays currently. Is it possible to determine to create a condition to show another region in they are on a particular view?

  This can be achieved using some dynamic measurements, to hide the region if the calendar is the display month view when loading the page and to show/hide the region when you click the list/month selector.

  Add a static region ID to region calendar for use in jQuery selectors.

  Name: See the region list - load

  Event: Loading the page

  Condition: Expression of JavaScript

  Value:$('#static-region-id .fc-month-view').length > 0

  Real Action

  Action: Hide

  Selection type: Region

  Region:

  Nom : See the region list - click

  Event: Click

  Selection type: jQuery Selector

  jQuery Selector:.fc-button-group button

  Condition: Expression of JavaScript

  Value:$(this.triggeringElement).hasClass('fc-list-button')

  Real Action

  Action: Show

  Selection type: Region

  Region:

  
  

  Action of false

  Action: Hide

  Selection type: Region

  Region:

• Calendar view

  Hello

  I created a view in my database and I was wondering everyone ever or know in a simple way using the measure, perhaps with some nested regions to create a calendar view?

  I want to basically have the days indicated, with the ability to view the week, day, and year.  do not need to add or change only view the event and its details.

  appreciate if anyone knows how this can be done using the features of measure.

  I know interakt had a calendar built in so I was wondering if it is possible with the uninstall?

  Thank you

  deansy55 wrote:

  Thanks gunter, as I said, I created the view in mysql of the dates I want to display.

  Oops, didn t realize you were talking about the feature 'View' of MySQL 5 +.

  is it possible if I produce the recordset from my view to use one of the assistants to create a calendar view?

  Better try this yourself, but I heard that (I m citing a message by another user in another forum...), well that they´re displayed in the server behaviors panel, "views on their own are not supported natively in Dreamweaver" - and if not supported they´re indeed mean, Dreamweavers (and ADDT´s) assistants would assumingly refuse to integrate them in the constructor for the Recordset object.

  my knowledge of php is minimal

  I guess you need for you become familiar with the syntax to produce recordsets using Vews - that s certainly feasible, but Dreamweaver won't provide any Automation here.

  See you soon,.

  Günter

• Outlook 2003 calendar view

  I would like the views of day and 5 days on my calendar to display only the day's work, that is to say from 08:00 - 18:00. I changed the start times and end at that time and change shading, however I always stayed with 8 hours of empty space above my work day and 6 hours in the space below. No idea how this can be done?

  Outlook:

   

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Outlook.General&lang=en&CR=us

  Discussions of general issues of Outlook.

  They will help you with your Outlook questions when repost you in the Office discussion groups above.

  See you soon.

  Mick Murphy - Microsoft partner

• Calendar view bad Cougar on iMac

  Recently (finally!) updated in early 2009 iMac to Mountain Lion.  A few things have caused problems, but it is coming along.

  However, the calendar date, display on the dock (bottom of screen) keeps failing to 17 July and I can't seem to view the current date (currently on 2 September.)  When I double-click on the "17 July", OR right click then open - the calendar appears correct.  (Shows the month of September, as well as Friday the 2nd highlighted.)

  Sometimes it will show correctly in the dock, and sometimes it won't.  And even if it does, it doesn't "stick."

  I have the latest version of Mt Lion (10.8.5) and apparently can't go higher than that since Apple does not seem to have the first version of Mavericks more.

  Cathy

  If your computer can run Mountain Lion, he can run El Capitan, if you want to upgrade.

  The alias station may be impaired. Control - click/Options/remove the Dock or hold down the control key by clicking and now the alias of Dock and drag it off the Dock. Quit/relaunch of calendar. Then control - click/Options/keep in Dock.

  If this does not work, try to restart the Dock using the following command in Terminal:

  Killall Dock

  Log outgoing/incoming and test. If this does not work, you need to look in your user Library/Application Support/docking station for the .db. Use the Finder "Go to folder" command. Enter ~/Library/Applications Support/Dock.  Move the .db on your desktop.

  Then try a reset of the docking station.

  Applications/Utilities/Terminal enter the command

  Killall Dock

  Log out/in test. If it works fine, delete the .db from the desktop.

  If the dock is the same, back up the .db you, crushing the latest.

• Today the arrested pane calendar view

  Only tasks see the place in the today pane. At the bottom of the pane it says please select a calendar available in writing, but it is not clickable and not the slightest idea how to choose. Thanks for any help.

  You have a pane that lists all of your calendars on the left side of the main page of the calendar window?
  Otherwise, select list view-calendar-calendar

  If the list is not visible, and but this option is checked in the menu, hover your mouse on the left margin of the window until it turns into arrow double head. Click and drag to the right to display the list.

  Right-click your calendar, select Properties , then make sure it is not marked read-only

  I don't know that's it, but since it States to select an accessible calendar in writing it's worth.

• 5681 calendar view to 'reach '.

  I do turn into some unusual problems, understand the time to sample the 5681 scope mode.

  aid is of great help. Thus, a few quick questions, assuming a capture internally triggered 300mS RF burst with a portico at 50 to 250 ms is desired using 200 samples by default is desired.

  I put my capture time to 300mS I appear to trigger on the correct side.

  Why apparently do more than 300 ms in my capture?  What is the sampling frequency of the 5681? What effect does changing samples by capture or the duration of capture has on the sample calendar?

  Protection against noise of the internal trigger is anywhere from 1 to 10 samples. One is no noise immunity. The first sample that rises above or below the threshold is triggered. If we define 2, you need two samples above or below the threshold to trigger. If a sample to survey/falls but the following does not work, we only fire and start waiting for the trigger. Because we now need two samples to trigger, we start to collect data about 14 microseconds later. If we want to get these samples back, we put the trigger delay to-.014ms. The same logic applies for higher amounts of protection against noise.

• Convergence 2u5 - how to get the ISO week number in calendar view?

  Hello
  
  Convergence seems to be displaying week numbers "US Standard" (e.g. 27/02/2013 is week 8).
  I don't see any option to display European/ISO week numbers (27/02/2013 is week * 9 *).
  
  You can test on this page: http://www.onlineconversion.com/day_week_number.htm
  
  Tested with 2u5 and Convergence 2u4.
  
  Technically, Convergence depends currently dojo to calculate WeekNumber (kernel.js called dojo.date.locale.format that calls dojo.date.locale._getWeekOfYear which uses US Standard).
  The dojox.date.posix.getIsoWeekOfYear method can be called to get the ISO week number.
  
  EDIT: ok, known problem.
  https://support.Oracle.com/epmos/faces/UI/km/BugDisplay.JSPX?ID=15920988
  
  And:
  https://support.Oracle.com/epmos/faces/UI/km/SearchDocDisplay.JSPX?_afrLoop=358252901368927 & type = document & ID = 1508601.1 & DisplayIndex = 1 & _afrWindowMode = 0 & _adf. CTRL-State = hy91faqhm_93
  
  Published by: user13722792 on 27 Feb. 2013 02:03

  Yes, we talk about behavior. However, demand for next development was opened on this:

  15920988 DO WEEK NUMBERING CUSTOMIZABLE IN CONVERGENCE

  More on that we can read in the document of knowledge:
  The numbering of the week in the calendar week view is inconsistent with the ISO8601 (Doc ID [1508601.1 | https://support.oracle.com/rs?type=doc&id=1508601.1])

  It also contains a customization to get Convergence use week numbering.

  If you want to be officially added to the demand of development, you need to open a Service request, which contains this application.

  Cheers, Ben

• Materialized view questions...

  Hi all..
  
  Please help me with the following question on the materialized view.
  I need to create a MV on my LOCAL_DB on a table that is located on REMOTE_DB.
  Should I created the log of the view materialized in the '' REMOTE_DB".
  
  1)
  
  Are there disadvantages in using materialized views? I mean, there is no maintenance required
  When the database has stopped or
  
  2)
  «I create view materliazied as "" select * from table_name "»»
  If the base table changes, influence my materialized view.
  
  I have the following sqls to create the mv, please let me know if that is correct.
  
  
  -LOCAL_DATABASE
  Plates_mv CREATE MATERIALIZED VIEW
  REFRESH quickly
  START BY SYSDATE
  NEXT SYSDATE + 1
  AS SELECT * FROM plates@home_dmv.world;
  
  
  -REMOTE_DATABASE or LOCAL_DATABASE?
  CREATE MATERIALIZED VIEW LOG ON plates;
  
  I thank in advance.
  

• Site Web Viewer question - buttons within WHO

  I have not seen this as a problem "known", but I think it could be a common. Buttons in multi-state objects are not displayed when you use the web viewer. It does not seem there are a lot of States or buttons that trigger the issue.

  The question as I was creating a custom menu in a section to browse the pages.

  Steps to reproduce the bug:

  1 create a multi-state 2-State on page 1 of a folio

  2 al ' State 1 or 2, create a button 'navto' to the next page of the current article.

  3 send page, publish account with 'sharing' is enabled.

  4. notice of publication with web viewer using the latest browsers Chrome and Safari for Mac.

  Results: MSO buttons not displayed on the latest browsers Chrome and Safari for Mac.

  Expected results: MSO on-screen buttons and function.

  Hello

  I am one of the engineers responsible for the Web Viewer. In the last days, we have provided an update to the Web Viewer that should solve the problem you describe.

  Could you please you try to display the article once again, see you if the problem has been resolved?

  If she was not, could you send the link to the article in a reply or send me a direct message, so we can diagnose what is happening?

  Thank you.

• Viewing and buying Desktop / Web Viewer Question.

  I understand that if you share your free content via your iOS app it can be viewed in a browser (with a few features missing like hitting swiping images.)

  My question is this...

  I have a business account... A person buy the magazine and finds the whole magazine through a desktop computer with the DPS Web Viewer? Or its just limited to free content on your web browser, but they must have an iPad to view all mag?  They get full access to the desktop so they buy.

  Thank you

  Ron

  For a professional customer, can be considered as free content that was shared on the web viewer/office. For customers of the company, content restricted access are accessible via the right using the SDK Web content viewer