Call a PL/SQL stored procedure
HelloI created a stored procedure p1 that calls another stored procedure PLSQLScheduler(). This PLSQLScheduler() is invoking a Web service and it works very well.
create or replace procedure p1 as
Start
call PLSQLScheduler();
end;
Now, I created a job, that must call my webservice for all hours. From now on, I gave to every 2 minutes.
Start
() dbms_scheduler.create_job
job_name = > Test_Job',.
job_type = > 'PLSQL_BLOCK ',.
job_action = > ' start p1(); end;',
repeat_interval = > ' FREQ = MINUTELY; RANGE = 2',
enabled = > TRUE,
auto_drop = > FALSE,
Comments = > 'Test job');
end;
When the Planner call p1() for every 2 minutes, it is defeat and I get the error below.
ORA-06550: line ORA-06550: line 1, column 476:
PLS-00905: ORABPEL object. P1 is not valid
ORA-06550: line 1, column 476:
PL/SQL: Statement ignored
*, column :*
But when I try to call my Web service using call PLSQLScheduler(); It is on the basis of my webservice. The same that I gave in a stored procedure. But it does not work. Can anyone help.
Thank you.
Little things that I notice, although they might not have something to do with the question.
1)
create or replace procedure p1 as
begin
call PLSQLScheduler();
end;
I would have written that:
create or replace procedure p1 as
begin
PLSQLScheduler;
end;
(2) similar with your pl/sql block which is on demand:
'begin p1; end;'
Are you sure that there is only one p1 in your database? If the Scheduler is picking up a different p1 (which is not valid) than you think?
Tags: Database
Similar Questions
-
Call a PL/SQL stored procedure - data type mismatch
I call a PL/SQL stored procedure from within a procedure of ODI using the specified technique page Cezar and Julien (http://odiexperts.com/how-to-use-plsql-procedures-and-functions-in-odi) and I get the error "Wrong number or argument types»
I tested each of the types of parameters, in that I'm passing and it is the text that is causing the problem. I tried to use 'Text' and 'Alphanumeric' for the data type of the variable of the ODI and so many VARCHAR2 and VARCHAR for the PL/SQL parameter type and I can't make it work.
Is there a trick for passing a string in the ODI PL/SQl?Hello
Ensure
1. to declare/refresh of the variable before call to PL/SQL.
2. If the variable is of "alphanumeric" ODI calling must be attached to apostrophes and prefix with the code project as ' #MYPROJECT. ODI_Var'
3. as parameters you have u who must pass both during the call (IN, OUT, etc.).
Thank you
Guru -
call a pl/sql stored procedure from a report link
Hi all:
I have a report with a link in a column, which you take to another page and passes the values to this page, but also need to link, run a stored procedure before you go to the other page.
In the Forum, I found a case similar to this one, but none of the examples is clear to me that I'm doing this. It seems that the target of the link must be URL, and also I have to call the stored procedure with a javascript function.
My questions are:
-Is the best way to do what I need?
-How should be the syntax of the link that takes me to another page and run the "procedure".
-How and where I put the "javascript" function to execute the "stored procedure".
BDD: Oracle 11 g
Apex 4.1 version
Best regards
GerardHello
Change the link to call an apex.submit procedure. (javascript).
Edit:
I created a basic example.
Region 1 (just so that you can see the value ready):
Select: P27_HIDDEN item_Value
of the doubleRegion 2:
rownum SELECT id, dbms_random.string ('U', 12) sss
of the double
connect by level<=>=>element attributes for ID:
Target: URL
URL: javascript:apex.submit ({request: 'NAVIGATE', value: {'P27_HIDDEN': #ID #}});(P27_HIDDEN is just a hidden item I created)
http://Apex.Oracle.com/pls/Apex/f?p=54920:27
Edit2:
In your case, then you can only have a page based on conditions request = expression1, expression1: NAVIGATE... then a branch of the page to go to the desired page, also with the same conditions
Edit3:
I'm not sure what examples you're talking about, that you provide no link; but you mention calling the stored procedure of javascript, so would probably involve some AJAX, but is not necessary IMO.
-
How to create simultaneous program of type PL/SQL stored procedure?
I have the procedure to reset sequence as below:
CREATE OR REPLACE PROCEDURE DEV_RESET_XX IS
V_NEXT_VAL1 NUMBER;
BEGIN
RUN IMMEDIATELY "ALTER SEQUENCE DEV_RECEIPT_S1 MINVALUE 0';"
RUN IMMEDIATELY "SELECT DEV_RECEIPT_S1. DOUBLE NEXTVAL ' IN V_NEXT_VAL1;
RUN IMMEDIATELY "ALTER SEQUENCE DEV_RECEIPT_S1 INCREMENT BY ' |" -V_NEXT_VAL1;
RUN IMMEDIATELY "SELECT DEV_RECEIPT_S1. DOUBLE NEXTVAL ' IN V_NEXT_VAL1;
RUN IMMEDIATELY "ALTER SEQUENCE INCREMENT DEV_RECEIPT_S1 1 ';"
END DEV_RESET_XX;
And if I run this query don't use PL/SQL, no problem and success.
EXEC DEV_RESET_XX
And then I want to create simultaneous program for this procedure.
1. create the executable program
-Methods: PL/SQL, stored procedure
2. create the simultaneous program
-Call the executable program
-Nothing parameter
3. assign the application group to receive
And then I try to run this competitor.
But, status complete error.
Help, please.
Thank you.
Hello
To save pl sql program, we have two required parameters. ERRBUFF and RETCODE
Steps to create a concurrent program of type PL/SQL stored procedure. Techmandate.com
No need to create these parameters in the simultaneous program window. Just use those in your procedure.
hope this will help you
-
BPEL does not receive "return value" of MS SQL, stored procedure
Hello
We are facing this problem citing a MS SQL stored procedure the BPEL (jdbc 1.2 driver). We have created the wsdl for the stored procedure correctly using a command line utility tool provided with Oracle SOA Suite.
But the question is THAT BPEL is not able to get the data present in the statement of "return" of the procedure. We receive null output. But it is able to extract the data from the output variable, if any. Case 1 below is for the return statement. Case 2 is for the output variable
Case 1: in the following, the output is returned using the return statement. The BPEL that calls this procedure is to obtain a NULL value as an answer to this.
ALTER PROCEDURE [dbo]. [AddNumbersRet]
-Add the parameters for the procedure
@Number1 int,
@Number2 int
AS
BEGIN
-SET NOCOUNT ON added to avoid additional results sets from
-interfering with SELECT statements.
SET NOCOUNT ON;
-Controls insert for procedure here
Return (@Number1 + @Number2);
END
Case 2: in the following, the output is returned using the SumOfNums output variable. The BPEL that calls this procedure is to obtain a correct answer.
ALTER PROCEDURE [dbo]. [AddNumbers]
@Number1 int,
@Number2 int,
@SumOfNums int output
AS
BEGIN
-SET NOCOUNT ON added to avoid additional results sets from
-interfering with SELECT statements.
SET NOCOUNT ON;
Set @SumOfNums = (@Number1 + @Number2);
END
Case 1 is a failure and case 2 is successful. We cannot change our procedures similar to case 1 to use variables of output because of dependencies on other applications.
All the world is facing this problem? This looks like a bug in BPEL. Please, share your experiences.
Thanks and greetings
Mohan
Published by: user10980910 on December 8, 2009 05:16There is a gap in the command line utility that was addressed in the adapter configuration (AS11gR1) Wizard. The API is a procedure, not a function, so does not return the query for the parameters that the utility made anything for the RETURN statement.
The adapter configuration wizard is unable to say if there is a RETURN statement either, but it provides the user with a check box that can be used to indicate the presence of the declaration. In the wizard, if you check the checkbox, a parameter is added to the XSD to the RETURN statement. In essence, the adapter will process the procedure as a function and you will get the value of the PERFORMANCE.
Usually, I wish to indicate that you certainly should NOT change the generated XSD. But you might be able to do it, by adding the necessary element to the OutputParameters for your RETURN statement. Add the following immediately AFTER the element of 'Lines', which occurs first in the XSD and BEFORE all items for the other none.
Use a value for the "
" that is meaningful to you. The wizard uses the name of the stored procedure with the name of the element. We could call this "RETURN_VALUE" or else if is more to your liking. Add the item after you generate the XSD using the command line utility, and then use the XSD when you model your BPEL processes. The WSDL should already have the content for this element handling. -
Creation of XML report using the PL/SQL stored procedure
Hi friends,
I'm working on a report xml with the xml source as a PL/SQL stored procedure.
I mean the fiscal year indicated in the following link to understand the process:
http://orclapp.blogspot.com/2012/02/developing-xml-publisher-report-using.html
In the example shown in the link above, I did not understand the following:
(1) in the following procedure, setting out "retcode" is not used at all.
What is the importance of this parameter.
REPORT PROCEDURE (errbuf OUT VARCHAR2, retcode OUT VARCHAR2, p_product_id in NUMBERS)
(2) after the xml data are prepared and updates 'l_result' variable Clob, what follows
Loop is executed. I am not able to understand why the following loop is required.
LOOP
EXIT WHEN l_length = l_retrieved;
IF (l_length - l_retrieved) < 32000
THEN
SELECT SUBSTR (l_result, l_retrieved + 1) IN l_xmlstr FROM DUAL;
l_retrieved: = l_length;
fnd_file.put_line (fnd_file.output, l_xmlstr);
ON THE OTHER
SELECT SUBSTR (l_result, l_retrieved + 1, l_offset)
IN l_xmlstr
FROM DUAL;
l_retrieved: = l_retrieved + l_offset.
fnd_file.put_line (fnd_file.output, l_xmlstr);
END IF;
END LOOP;
(3) in the example it is not explained how the concurrent program gets the xml data?
I guess that it is written to a file by using the following line of code:
fnd_file.put_line (fnd_file.output, l_xmlstr);
I would be grateful if someone can shed some light in my questions above so that I can well understand the process.
Thanks and greetings
Hawker
Hi 32000 in the code is a 'safe' than 32767 available max mesh, loops is intended to get around the entire thing into pieces that can be managed within the limits of the data type.
BTW; If you are in the following Oracle e-business, you can also use the Oracle reports very simply to create the XML output.
If you have reports developer all you need to do is put raw sql (create XML without any "Fireworks") in the SQL report and then set reporting in XML format in the definition of program in Oracle e-business.
Best regards
Robert.
-
to find the location of PL/SQL, stored PROCEDURE in the database
Hello
This is the detail I have the executable of the Application Developer program simultaneous
Executable NAPESCO_STAFF_LEDGER_DTLS
Short name NPSTALEDDTLS
Application of human resources
Execution of PL/SQL, stored procedure method
Name of file execution NAPESCO_STAFF_LEDGER_DTLS
I would like to know how to view and change this procedure, where it is stored
kindly helpHello
This seems to be a custom package. To display the source of the simultaneous program ' PL/SQL Stored Procedure', please refer to (Note: 455582.1 - where can I get the whole "stored procedure" Pl/Sql Source file on the current program?).
Thank you
Hussein -
SQL stored procedure input and output parameters
Hello Gang,
My dead end trying to call a stored procedure in SQL Server 2008 with the LV database tool.
for purposes of experimentation, I've created a small procedure with an input parameter that returns an integer as return value. It works describing a query, but all attempts at LV produce an error-2147217900 when executing query VI. I did find examples of that.
Sending a bunch of parameters to a stored procedure and checking the value of return seems to be pretty common stuff.
I'll appreciate any help.
Thank you
Roger
Hi Roger,
There are a few prerequisites which I will list below. If you have not checked these things, so don't hesitate, as your hiccups can be there.
Prerequisites:
- Ensure that you can read from a table in the database to verify that you can access the database (user permissions) and ensure that your login details are correct. Among other things, make sure that the. DSN switches to the correct database. (See the simple example below, SQL Select.vi)
- Make sure that your user (if you use SQL authentication) has permissions to run the STORED procedure by running the procedure in SQL Server Management Studio (you seem to have already done this)
Example by calling a procedure without parameters (attached as SPROC_No_Parameters.vi):
Example by calling a procedure with parameters (attached as SPROC_Parameters.vi):
An article on the execution of stored procedures is here:
http://digital.NI.com/public.nsf/allkb/07FD130746083E0686257300006326C4
Don't forget to download the example VI since it includes the cases where you want an output parameter of the procedure rather than a table.
I tested these against two very simple SPROCs and it worked fine (on SQL Server 2005, but 2008 should be the same). Stored procedures have been:
CREATE PROCEDURE [dbo]. [GetContacts]
AS
BEGIN
-SET NOCOUNT ON added to avoid additional results sets from
-interfering with SELECT statements.
SET NOCOUNT ON;-Controls insert for procedure here
SELECT * FROM Contacts
ENDand
CREATE PROCEDURE [dbo]. [MultiplyAges]
@param1 INT = 1
AS
BEGIN
-SET NOCOUNT ON added to avoid additional results sets from
-interfering with SELECT statements.
SET NOCOUNT ON;-Controls insert for procedure here
SELECT (age * @param1) OF Contacts
ENDI would like to know if these examples work for you or if you have any other questions. Don't forget to go through this KB article and articles related to it, they should cover other situations.
Matt
- Ensure that you can read from a table in the database to verify that you can access the database (user permissions) and ensure that your login details are correct. Among other things, make sure that the. DSN switches to the correct database. (See the simple example below, SQL Select.vi)
-
Hello
I'm new to the development of Oracle.
I have the following scenario for which I need your help/suggestions to write a stored procedure.
A load process in a table unfolds with about million files once a month.
I have a LOG Table to record the events of job loading IE when it starts, when it stops, status etc. with the following columns
job_name, job_status, start_time, end_time, date, flag
work focuses on the work that is in charge of the table.
Based on the values in this table, I want to develop a stored procedure sql pl verifies the status of the job and does the following
When the flag = R (assume for running job) set it to run the job again as 1 hour later... if its still ongoing then 1 hour later... so now up to 5 trys
= F (Finished)
= E (error problem) launch the load immediately
The flag State values noted above are not binding... values just to give you an idea... all the other variables to use to store procedure or any new passes in the table... .suggestions are welcome for these values as well.
Basically, I would like the stored procedure to be called at some point... say SUNDAY at 06:00 and check the STATUS of the INDICATOR/table newspaper column and run.
In short, I like the pl sql store procedure to use table to log and monitor the loading process.
Structure/Basic code stored procedure for this requirement or a stored procedure that you have met similar requirements are welcome.
Thanks in advance.
Published by: user13517642 on March 23, 2011 13:28
Published by: user13517642 on March 23, 2011 13:29Your process or procedure shud look like - [not tested]
DECLARE l_flag LOG.flag%TYPE; BEGIN SELECT flag INTO l_flag FROM LOG WHERE job_name = p_job_name; WHILE l_flag = 'R' LOOP DBMS_LOCK.sleep (3600); --3600secs in 1hr SELECT flag INTO l_flag FROM LOG WHERE job_name = p_job_name; END LOOP; IF (l_flag IN ('F', 'E')) THEN --<
> END IF; END; Look at the following to find out how to plan work-
http://www.oradev.com/dbms_scheduler.jsp
Published by: Sri on 23 March 2011 14:10
Published by: Sri on 23 March 2011 14:11
-
Called Java overloaded with stored procedures
I have two stored procedures with the same name and the same number of parameters. They are overworked because the two procedures differ in the data type of their parameters. In addition, there are 2 2 parameters and the other has 3 in and 1 OUT parameter.
But Java has problem describing as Java is unable to distinguish that they are two different procedures. How Java should treat calling them? I don't want to change their name.
Thank youuser5406804 wrote:
Is not in Java, no way to achieve
nom_de_variable-online valueWhat you are referring is named notation, a way to specify an argument name with its value instead of associating the argument which the variable position value in the call. Given that the appeal should be processed through SQL and just be text to Java try to use named notation in the appeal of Java like you did in Oracle directly and see if it works. If it does not try to use the wrapper procedure I described.
-
Server SQL, stored procedure
Hi all
I use an ODI procedure to call stored procedures in SQL Server 2.
In the steps of the procedure, I have 2 - one for each proc and the syntax is simply the name of the stored procedure.
The overall procedure is defined as being a part of the SCENE and advanced pattern to a TEST context - the pattern of staging is SQL Server technology.
When I run the procedure, it does not say that it cannot find the stored procedure, but if I give him a fully resolved path (i.e. db_name.dbo.usp_proc1) and restart the stage in operator, it works fine.
Now--and correct me if I make a wrong assumption here - I thought that values for catalog and schema in the definition of database server would be added to the statement. I don't want to hard code my db_name and owner in my procedure that makes porting applications to another a little rigid environment.
ODI obviously understands that the command is a SQL Server stored procedure but don't derive from the elements defined by the schema specified in the step of the procedure.
Can anyone help?
Thank you
GYou must use the odiRef.getObjectName () method of substitution
This method returns the full name of a physical object, including its catalog and schema.
Take a look at the doc for the settings... -
appellant the pl/sql stored procedure
Jdev11g R2, ADF BC
I have a stored procedure 'COPY_BKG_E2I' and it has three input parameters to generate a new record in the database.
===========================================================================
I created the AM method as follows and defined as method of the client AM class:
=========================================================
helper method:
===========
protected void callStoredProcedure (String stmt, Object [] bindVars) {}
PreparedStatement st = null;
try {}
// 1. Create a JDBC PreparedStatement for
St = (PreparedStatement class) getDBTransaction () .createPreparedStatement ('start' stmt + ";"end;", 0);
If (bindVars! = null) {}
// 2. Loop on values for the bind variables passed, if any
for (int z = 0; z < bindVars.length; z ++) {}
// 3. Set the value of each variable binding in the statement
st.setObject (z + 1, bindVars [z]);
}
}
// 4. Execute the statement
st.executeUpdate ();
}
catch (SQLException e) {}
throw new Aexception.getLocalizedMessage (e);
}
{Finally
If (st! = null) {}
try {}
// 5. Close statement
St.Close ();
}
catch (SQLException e) {}
}
}
}
call the stored procedure:
{} public void callProcWithThreeArgs (String V_BKG_NO, String V_VESSEL_ARRIVED_REMARKS, Date V_ATA_POD_D)
callStoredProcedure ("COPY_BKG_E2I(?,?,?)", ")
New Object [] {V_BKG_NO, V_ATA_POD_D, V_VESSEL_ARRIVED_REMARKS});
}
Now, I created back bean and page fragment,
=================================
in my page fragment, I bind the field three entries to the bean back:
============================================
package olfms.view.backing;
Import oracle.adf.view.rich.component.rich.input.RichInputDate;
Import oracle.adf.view.rich.component.rich.input.RichInputText;
Import oracle.adf.view.rich.component.rich.output.RichOutputText;
public class saveBkgUpd {}
Private RichOutputText bkg_no;
Private RichInputDate arrive_date;
Private RichInputText arrive_remarks;
public saveBkgUpd() {}
Super();
}
{} public void setBkg_no (RichOutputText bkg_no)
This.bkg_no = bkg_no;
}
public RichOutputText getBkg_no() {}
Return bkg_no;
}
{} public void setArrive_date (RichInputDate arrive_date)
This.arrive_date = arrive_date;
}
public RichInputDate getArrive_date() {}
Return arrive_date;
}
{} public void setArrive_remarks (RichInputText arrive_remarks)
This.arrive_remarks = arrive_remarks;
}
public RichInputText getArrive_remarks() {}
Return arrive_remarks;
}
My question:
//?????? How to call the callProcWithThreeArgs with these three bkg_no; arrive_date; arrive_remarks; Help, please! Thank you!
?
}Check your imports
especially: import oracle.binding.BindingContainer;
This is the bean of tireimport oracle.adf.model.BindingContext; import oracle.binding.BindingContainer; import oracle.binding.OperationBinding; public class Test { public Test() { } public BindingContainer getBindings() { return BindingContext.getCurrent().getCurrentBindingsEntry(); } public String callProcedureProgramatically() { BindingContainer bindings = getBindings(); OperationBinding operationBinding = bindings.getOperationBinding("callProcWithThreeArgs"); operationBinding.getParamsMap().put("param1", "first value"); operationBinding.getParamsMap().put("param2", "second value") ; operationBinding.getParamsMap().put("param3", "third value"); Object result = operationBinding.execute(); if (!operationBinding.getErrors().isEmpty()) { return null; } return null; } }
-
How to execute a pl/sql stored procedure as a concurrent program
Hi all
I created a PURGE_DEAL_REQUESTS package. It contains a QPR_DELETE_CANCELLED_REQUESTS procedure. I want to execute this stored procedure as simultaneous program in suite ebs...
Can someone tell me how to perform this procedure as a simultaneous program (in the suite of BSE)...?
Thank you
Swathi.Switch to the responsibility at the request of the group to which you assigned the request of Conurrent.
Navigate to view > query > submit a new request to the toolbar.Kind regards
Ousseni -
Generate output XML for a PL/SQL stored procedure concurrent program (EBS).
Hello
I trying to generate XML output for a simultaneous PL/SQL program and then use it as a model for BEEP.
Program PL/SQL for a report consist of sliders/queries and other calculations of output data.
Program (report) made up of topics, couple of col. values of one or more tables DB and rest of the columns are values read from DB colonel and calculated. The length of the neck extends up to 280 characters.
All out - put is shown using fnd_file.put_line (fnd_file.ouput,...);
before first fnd_file statement, included the following stmt.
fnd_file.put_line (fnd_file.output,' <? xml version = "1.0" encoding = "UTF - 8"? > ');
Using demand conc., notice ouptut poster error...
The XML page cannot be displayed
Invalid at the top level of the document. Error during processing of the resources ' http://ohcol0ws023.amp-ohio.org:8004/OA_CGI/FNDWRR.exe...
<? XML version = "1.0" encoding = "UTF-8"? >
I tried to add tags in the rest of the fnd_file.put_line stmts. as
fnd_file.put_line (fnd_file.output, '< Heading1 >' |) 'Report name ' | (/ head2 > '); etc.
View output shows the same error message.
PL. advise how go further or tell me the link, if it's already been answered earlier.
Thank you
PrakCopy the file from $APPLCSF / $APPLOUT to your customer and try to open it. Find out what's wrong with the code XML, for example, you may need to top level element:
Write to me if you can't get by - see my profile.
Kind regards
Gareth -
Call the stored procedure to odi
Hi all
Posible calls a pl/sql stored procedure of odi?In ODI, create a procedure in your project, here, you can call a stored procedure name.
This can then be slid into a package as a package step.
geeo
Maybe you are looking for
-
Create a message put backups in _Bulk drafts folder while typing
While creating a new message, copy of message are placed in a Local folder at the rate of about 1 copy every 2 minutes while I'm typing. Each copy is different because it's a picture of what I had typed. This appeared about two improvements but there
-
Audiobook stuck a previous reading position
This happens often on my phone when I check the backup position of recovery on the book on ITunes. He is locked in a certain position and don't go beyond that point. I'm currently stuck in the 45 minutes on a book of 15 h. If I listen to say 65 min
-
In the case of digizer NI 5132, what is the meaning of ch - 4 MB and 32 MB/Channel?
-
Why amplitude does not equal zero?
Hello I want to measure the Ridge Crest of a square wave (0, 1-2Vac). I generate and acquire the signal using a USB-6008. I tried to do it in various ways as you can see in the attachments, but all I get is zero. The signal is perfectly read. No idea
-
How can I get Powershell 2.0 for XP?
I just downloaded Powershell 2.0 for Microsoft XP. It seems that Powershell 1.0. How can I get Powershell 2.0? E-mail address is removed from the privacy *.