Call dll error 1097

Similar Questions

• error 1097 after the call dll function that allocates memory inside

  Hello!

  When a one call my duties in my dll of LabView, I get an error 1097. My function takes a few arguments, and then allocates memory for the measure.

  He doesn't have pointers to this memory area, it's just allocates this memory for himself. I don't know what could be the problem, no doubt, I'm missing something.

  Could you please help?

  Best regards

  Tamas

  
  

• Error 1097 when calling DLLS in LabView

  I get an error 1097 when calling the LabVIEW provider library. Curiously, the error, the DLL routines still seem to do what is asked of them.  This is the test code.  It opens an Ethernet connection to a controller of axes Galil, he asks (possibly) the value of its internal clock, and then closes the connection.  Each call library function returns error 1097 but "valve function" I32 error number is always zero. Open function causes the connection to be opened, the command function causes the send command and receives a reasonable answer, narrow funtion seems to cause the connection to be closed.

  

  Here is what I see when I run the test:

  

  Also directly configure call-library functions, as I did in this VI, I also tried using the import-shared-library Wizard to create a vilib of functions of the DLL and I get the same behavior and errors when I use these functions.  I tried to tweak some of the data types in my configured manually call library functions to see if I could find a combination that worked better with the library, but had no luck there.

  I use the x 86 version of the DLL with v2014 LabVIEW 32-bit on a 64 bit windows system 7.  I see that the error on the two computer systems of different work configured in this way. I see a similar error on a home computer with just the RTE of 2014 installed. The manufacturer says they can not reproduce the error. I always saw the error over multiple versions of their library DLL.

  In the attachment ZIP it has a link to the DLL library on the manufacturer's website. There is also a copy of the VI, the DLL and a large part of how-to-use documentation that accompanies the DLL.

  I was hoping that someone who was familiar with the use of the call-library function might take a peek at what I do and see if an error could be spotted.

  Unable to find an error, I did, I would be happy to suggestions on how I could solve this. Little seems to me like there may be a problem with the library. The manufacturer, Galil, said that they have opened a log with OR to see if NEITHER could help but since Galil said they can not reproduce the problem and provide an example of the NC, it really went anywhere.

  Given the decoration of symbol names as exported by the DLL I "m convinced that you must change the stdcall calling convention.

• During the selction DLL I always get error 1097

  Hello!

  I would like to include a DLL in my labview program. I fear, I still get the error 1097.

  -------------------------------

  Possible reasons:

  LabVIEW: An exception occurred in the external code that is called by a node call library feature. The exception may have corrupted the memory of LabVIEW. Save all work to a new location and restart LabVIEW.

  --------------------------------

  How I hired a labview to dll 2D table?

  The size of the arrays are 246 * 310. See c ++ code below!

  ------------------------------------------------

  #include "stdafx.h".
  #include
  const int DIM1 = 246;
  const int DIM2 = 310;

  BOOL APIENTRY DllMain (HANDLE hModule,
  DWORD ul_reason_for_call,
  LPVOID lpReserved
  )
  {
  Return TRUE;
  }

  __declspec(dllexport) double correlation WINAPI (double temp [DIM1] [DIM2], double [DIM1] [DIM2] candidate, long rows, long column) / / both 2D is 246 * 310 is this correct?
  {
  Double sum_quad_temp = 0.0;
  Double sum_quad_candidate = 0.0;
  Double sum_numerator = 0.0;

  Double denominator = 0.0;
  double result = 0.0;

  Double numerator [DIM1] [DIM2];
  Double quad_temp [DIM1] [DIM2];
  Double quad_candidate [DIM1] [DIM2];
   
  for (int a = 0;<=rows;>
  {
  for (int b = 0; b)<=column;>
  {
  to do

  }
  }
   
  for (int i = 0; i)<=rows;>
  {
  for (int j = 0; j)<=column;>
  {
  to do

  }
  }
   
  to do

  return (result); the return type is numeric (double 8 bytes)
  }

  No, no! Simply use the return name double [] [] . C

  double name [dim1] [dim2] is equivalent to double name [dim1 * dim2] and for a function parameter that is also the same as double * name (obviously the last does not apply for variable declarations itself as the first two will allocate a buffer in memory when the last allocates only a pointer, but the extent of passing parameters all three are simply a pointer to a memory area and I think the first two are only valid for the parameters in C++ or maybe C99) so, as you can see it's all simply a one-dimensional array of items. In LabVIEW, you work with your two-dimensional array and configure the library node call accordingly and pass the array as a table of C. LabVIEW pointer then will take care to pass the pointer to the data in the actual table service DLL.

• My program of software called photoimpact that XL does not open. I have a ge ulibpng.dll error.

  Original title: error ulibpng.dll

  My program of software called photoimpact that XL does not open.  I have a ge ulibpng.dll error.  I already reinstalled the program, but always error.

  Will be it someone please help me solve this problem.

  Thank you

  Try reinstalling the program.

  If this does not work, you can try a system restore to the it worked: http://support.microsoft.com/kb/306084

• Error 1097 - only on executable appeal

  Hello

  I have a vi that uses dll calls to interact with our instrument that works perfectly until I have build it as an application, where it give error 1097.

  I went through the debugging and it fails on the first call to the dll, so I'm sure it's a problem with the way that I call the dll. But I tried including the dll required in every single place I can imagine the search, which includes; Article project dependencies, high level vi, path of Subvi exe path, file data, SysWOW64 & System32, inside the lvlib files that are used... basically anywhere where I could paste the DLLs.

  I have another DLL made by the same company which I call in a different section of the code, and they run perfectly while being just included as usual to load in the application Builder (and stored in the data folder, as it seems normal)

  I use the same machine for development and deployment.

  I built all of the Subvi who calls the functions of the library with tools-> import-> Library (.dll) shared

  It's the Subvi (void) [Init] which gives the error. I missed a toplevel VI image because it is a very standard call of this sub - VI

  

  I don't know what I can do.

  Any help would be greatly appreciated

  I'm under Labview 2014 SP1 (32-bit) on a 64 OS Windows 7 bits (as a workaround for a problem of unrelated pilot)

  Thank you!

  There are other DLLs in the library driver instruments. Most likely, they are indirectly used by the DLL, you go from call library node. They must be present in the same directory as your executable file. When you run the VI in the development environment LabVIEW adds project directory and perhaps the directory lvlib to the search path that Windows should search for the secondary DLLs into an executable file, but that does not apply.

• Error 1097 while controlling a Velmex

  I use a configuration of Velmex two axes to quickly move a probe quickly into and out of a flame. The Velmex is supposed to move the probe in the flame, let it recueillir collect data, move it out of the flame, and then repeat the process at a slightly more advanced position inside the flame. After that is finished, the second engine step by step is supposed to back the probe and the process begins again. In the middle of the routine, however, it no longer works and I end up getting error 1097. Why is that happen?

  This is the VI for reference.

  Nothing to do in this VI and DLL. On the one hand a DLL is just a compiled code, so there is not much to see from the only DLL. Also a DLL contains no other information about how it is supposed to be called. The implementation of the pilot is terrible with all calls in a single VI and Boolean values a half-dozen select which of them to call. He deserves perhaps a 6 out of 10 for a feature, a style 1 and 2 for cleanliness.

  Without this driver DLL API documentation, there is absolutely nothing possible to tell about the accuracy of the CLN configurations. As simple as looking at the functions, there is always a chance that this configuration was wrong somewhere. Another less as being likely to cause is that the DLL itself is poorly written too. If the LabVIEW application is less for the quality of the driver DLL implementation, then I guess it would be easier to throw everything away and re-implement the pilot purely in LabVIEW.

• call dll issue

  Hello

  now I need to call a dll named SajetConnect.dll, this dll will create logfile and ini file automatically when I call.

  Attached VI call this dll, there is no log file and ini file created, but the exe file that I'm building this VI work well for her.

  I also call thie dll using c# and it still work fine.

  So it seems that some path setting question went from me, thanks for your help to take a look for my trouble, thank you!

  attached list

  2. without title vi VI

  New Folder\123\Application.exe create JOURNAL SAJET. INI SajetConnect.ini when you run this exe to call DLLs

  Without seeing the source code of the DLL there is very little we can do, but shooting in blue. And I have no balls to spare in this at the moment, except maybe the DLL tries to create these files in the directory where the executable. This would be the directory where the labview.exe deveopment environment. But given that Windows Vista users don't have write access to this directory more. Some features of the INI file are virtualized in these versions of Windows and redirected to a specific shade of the user location, but only if your application uses files INI of Windows API functions. Otherwise write access fails just and you won't see them unless you manage these errors in some way and proceed to the appellant.

• Calling DLLS in LabVIEW

  Hello

  Below is the code written in LabWindows in which dynamically access a Dll using Windows API LoadLibrary(), GetProcAddress(), and FreeLibrary().

  Successfully, I could load the library and get the procedure address using library calls node in LabVIEW. But got stuck after that.

  As I am not good in C/C++ coding, ask someone to really help me to write the same thing in LabVIEW.

  Kindly do the needful.

  #include   // Function prototypes.
  #include     // CVI Active X definitions.
  #include 
  #include    /* Needed if linking in external compiler; harmless otherwise */
  #include 
  #include 
  
  typedef long __stdcall( *OLECREATEOBJECT)(char*);
  static  HINSTANCE  Hinstlib;
  static  long  gvntISystem;
  
  long CviCreateFastObjects (void)
   {
  OLECREATEOBJECT procAdd;
      pStrTempmem      = (char*)CA_AllocMemory(1);
      Hinstlib = LoadLibrary("FastTrio");
      if( Hinstlib != NULL)
  {
          procAdd = (OLECREATEOBJECT) GetProcAddress(Hinstlib, "OLECreateObject");
          if(fRunTimeLinkSucess = (procAdd != NULL))
  {
          gvntISystem = (procAdd)("FAST.IMFASTSystemInterface");
          return 0;
          }
          else
          return 1;
          }
      else
          {
  return 1;
          }
  }
  

  All the information you need are in the C code.

  • OLECREATEOBJECT is typedefed just after all the #includes at the top.  It returns a long integer (typically I32 in LabVIEW, but could be I64 on a 64-bit operating system) and takes a string as input.  It uses the standard windows calling conventions, not the C calling convention.
  • LoadLibrary and GetProcAddress are used to get a pointer to the function (procAdd).  This is handled in LabVIEW, by filling in the location of the library and the function in the call library node.
  • The library of appeal in LabVIEW node must also be set to the standard calling convention and return value (I32) and list of parameters (a string) must be set.
  • the function is used to set gvntISystem with a constant of entry 'FAST. IMFASTSystemInterface ".  In LabVIEW, a constant string of wire at the entrance and read the return value.
  • You can implement the audit, thus using the call library errors node error output.

  Good luck!

• the API system configuration error 1097 and freezes

  I used successfully the API system configuration to detect and read information on a PXI chassis.

  But now, when I try to initialize and collated all information using a simple VI, the system returns error 1097 and crashes before the end of the VI.  Based on that the stop button does not work and I have to either soft or hard reboot the machine.

  I have attached a screenshot of it in a frozen state and error, like a report of what is installed on my system.

  The only thing I can think has changed since this last worked has been upgraded my MAX and other pilots from 5.5 to 14.0 and then the latest version as of today.

  It is usually the generic error, which means that some external code access violated the integrity of the system and the memory is likely to have been corrupted in the process. Since it is a NI API system AND it seems to have worked before, I guess it's not a bad disigned call library node, but a form of bribery in external code library itself which implements the API of the System Configuration.

  Reinstalling may solve the problem.

• DLL error at startup

  At the start, I had a DLL error. What it means? How should I do?

  (C:\WINDOWS\sdfodnvc.dll)

  ... C:\WINDOWS\sdfodnvc.dll...

  He is a stranger. DLL and very likely could be called from a remnant of some malicious software or viruses that your computer has partially removed/disabled.

  If this happens at startup, check the programs and the command lines that are expected to start when you start the computer.

  Click on Start, run or press Windows key + R , and type msconfig then the . Click the Startup tab.

  It's where he can be a little intimidating. You need to go through the entries and review the startup item, manufacturer and order to what looks like, it does not belong. Don't be too worried to uncheck anything that you can always come back here and check again the issue.

  Please note that unchecking an item in the list is not immediately turn a program or function. This simply means that the next time that you restart the computer, it will not be launched.

  FWIW, at least 90% of the computer, that I wonder to have a minimum of half a dozen unnecessary items in this list to Start, launch , especially small utility computer programs or computers/software manufacturers. Adobe is usually good for 2-3 items that can be disabled without affecting the average user.

• Blue C:\WINDOWS\wmcicif.dll error (Windows XP) specific module could not be found

  Blue C:\WINDOWS\wmcicif.dll error (Windows XP) specific module could not be found

  My printer kept jamming so I went to reboot my computer and this is the message that appeared and continue to appear each time that I reboot or turn my computer now.

  I deleted and re-installed my printer in the hope that it could solve my problem, however, it did not work.

  It is easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you solve the problem and not only correct the symptoms of the problem in just the startup message.  Deactivation of the item in msconfig 'fixed' nothing but the annoying startup message.
  I would recommend also you start to search in the register, unless you have a backup because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
  These ideas relieve 'rapid' and sometimes risky of the symptom, but may not actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.
  Here are the detailed instructions that protect you and solve your problem in the 'right' way.
  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira
  !, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can use Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove
  .  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Dragon Naturally Speaking v10 hangs Word 2007 on Vista Home Premium 64-bit (dgnword.dll error code: 0xc0000409)

  Dragon Naturally Speaking v10 hangs Word 2007 on Vista Home Premium 64-bit (dgnword.dll error code: 0xc0000409).  It worked fine for a few months, but then started crashing Word 2007 as soon as it says "loading... dictated." ».  I have uninstalled/reinstalled Dragon; same accident.  Uninstalled/2007reinstalled office; same accident.  Did anyone see the problem?  Any ideas on how to track it down?  Technical support in the shade had some ideas.  I don't know if it's worth to call MS tech support since it may not be a problem of Ms.  Thank you.

  Hi Rrobinson3,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to MS Office and would be better suited to the Office Online community. Please visit the link below to find a community that will provide the support you want.

  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  JohnD
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• C:\Windows\System32\***32.dll errors, from the start of the system and start the program.

  Hey. I received error messages and may not know whats going on. At the start of my laptop (Vista Premium 64, 2.0 ghz Core 2 Duo, 4 GB RAM, 250 GB hd), a series of error messages from reading: "* program title *-bad Image."      C:\Windows\System32\*Dllname here*.dll is not designed to run on Windows or it contains an error. Try to install the program using the origial installation media or contact your system administrator or support software provider. "The name of the cottage change programs and I get messages of 15 or more at the same time. The first so-called 'C:\windows\system32\fwcfg32.dll' error count, the next will say "khdtj9jg32.dll" and the final few say "dispex32.dll". Whenever I hit "ok" in the message, the name of the program window in the changes of the header. I tried to solve my problems (with no success) and do you have a file search for the files in the locations of scpecifed in error messages. I discovered the three files (fwcfg32.dll, khdtj9jg32.dll, dispex32.dll) do not exist in the system32 folder, but they do exist in the "syswow64" folder The system32 folder has files fwcfg.dll, khdtj9jg.dll and dispex.dll in if (note the "32" is not included in the file names). I was on my computer for 7 hours yesterday without problem, and everything I did was organize music files in my documents. I went online to look for something, then shortly after my computer slowed down upwards. He acted as if the RAM was complete (although he was not even 25% used), so I just rebooted my laptop in the hope that a RAM reset would fix it. Then restart I started to receiver messages error and also whenever I start a program. I scanned my system and removed 7 Trojan horses... even if I run Norton and Webroot SpySweeper somehow these got... that's not the point. I have a feeling easily, that played a helping hand to my troubles, and those who are deleted from my computer. Now, I have to recover from the disaster. Any suggestions? Thanks for your time!

  P.S. ~ just like a note aside, I did several searches on the internet, including on the microsoft forums, for the names of 'fwcfg32.dll', 'khdtj9jg32.dll' and 'dispex32.dll'.dll files and got zero results.

  Hello

  It seems that you have an important infection using the below methods of OVERKILL checking that no one can program
  detect or remove malicious software. Only when you are 100% sure you're own doing the cleaning included below.

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-my/default.htm?mkt=en-my

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Cleaning ONLY when you are sure that the system is clean:

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Rpcrt4.dll error at startup

  HI guys,.

  I have seen similar topics, but to be honest more I look into it more I'm confused.

  I get this error come in saying the ordinal 1000 could not be located in the dynamic link library rpcrt4.dll error. up to the top of the box, it says cloudsyncapp.exe - ordinal not found.

  I am currently under a new laptop with windows 7 64 bit system, it came when I transferred all fines in front of the old dell laptop that was running windows 10.

  any help appreciated.

  Thank you

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that you receive error message RPCRT4.dll on start up and I'll be happy to answer your query.

  The Rpcrt4.dll file is a file associated with the program Remote Procedure Call and is used by a number of Windows applications for connections, network and Internet, which allow computers and devices communicate with each other in order to keep your computer in perfect working condition. Because this file is a dynamic link library file, this means that it has a specific function to be performed so that your system works.

  Some of the main causes of this particular error will resolve around the file itself, as well as with the Windows registry. Some of the causes are going to be:

  • Windows registry keys are damaged and corrupted
  • The RPCRT4.dll file is missing
  • Connection has expired

  You can try the following methods and check the result.

  Method 1: Check your internet connection

  The first thing we do is to reset your modem or router, as this will refresh your Internet connection. You can ask for help from your ISP doing so. To reset the modem or the router follow the instructions:

  • Disconnect the cable that connects the computer to the modem
  • Turn off the modem and router
  • Note: If the model or the router does not have a power switch, turn off the power to the modem or to the router
  • Restart the computer
  • Once your computer has been restarted, turn on the modem or the router, connect the cable from the computer to the modem or the router, then restart the computer
  • Make sure that all network cables are properly connected

  Method 2: Run the System File Checker tool

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  To do this, click Start, type command or cmd prompt in the Search box, right click invite, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  Type the following command and press enter

  sfc/scannow

  Note: Do not close the command prompt window until the audit is completed 100%. The results of the analysis will be posted when this process is complete.

  From now, please try the methods above and let us know the status.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.