Call the library feature not filling in DLL functions

Similar Questions

• SHRegGetValueQ location in the library of dynamic links SHLWAPI.dll could not

  Ok. I have computer I reformat. It has Windows Home XP with SP1a with IE6. I reformatted the computer with a problem until I had to download IE8. When installing IE8 I get error "located at the entrance of procedure point SHRegGetValueQ could not in the library of dynamic links SHLWAPI.dll. I can't install SP2 or install the windows update until I have IE8. I reformatted it twice, thought that maybe I did something wrong. I look for this community without anything working. I reformatted it once before a few years back and had no problems. If you have a ssolutionto this problem please let me know without all this extra *. Just give what I need

  Happy that you guessed it work.  Thanks for the comments.

  -JW

• Error message: "the entry Point of procedure aspSearchInterfuce not found in the library of links dynamic wlanapi.dll" after SP 3 and IE 8 displays.

  Original title: Windows XP Home error message

  I reformatted the hard drive and restorded factory settings. I've upgraded to Service Pack 3 and IE 8. I now receive the errors listed below and the computer does not turn off. I have to hold in the power button to make it stop.

  Errors:

  The procedure entry Point aspSearchInterfuce could not

  Be found in the library of links dynamic wlanapi.dll

  The apsInitialze procedure entry Point could not be

  located in the library of links dynamic wlanapi.dll

  can someone please tell me what are these errors and how to fix?

  Hi Daytona931,

  Hope you were able to resolve the issue and thank you for sharing the information.

• The procedure entry point MigrateWinsockConfiguration could not be found in the library of dynamic links MSWSOCK.dll

  Get this message when I start my computer, that is when the sign of Windows in the reception area appears:

  It says netsh.exe - Entry Point not found

  The procedure entry point MigrateWinsockConfiguration could not be found in the library of dynamic links MSWSOCK.dll

  Hey Jay_551,

  I have a good amount of information which I hope will be your answer useful lol.
  For starters, what Anti Virus do you use, the "netsh.exe" has been know to be infected by the virus and be put in a folder by some anti-virus. So I would check that out in your antivirus, I had this info at the following link:
  http://social.Microsoft.com/forums/en-us/msrconferencexpclient/thread/92f50d2c-e7a4-4c16-91ea-06bd59e15f8f
  Also here is the Microsoft article on how to remove the 'Zentcom System Guard", he is recorded as my Microsoft Malware, then read the following link:
  http://www.Microsoft.com/security/portal/threat/encyclopedia/entry.aspx?name=Zentom+system+guard
  Also because it's a common thing for there to be lack of pop - ups after a system file is infected, and removed from the infection, I would review the last link below it. It was created about other missing files, but the situation applies to you:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/entry-point-not-found/66e6caf2-3087-4469-8816-59a19b3033c2

  Let us know the status or if you have any questions after these steps. I hope this has been useful and thanks for the display of Microsoft Answers!

• the apsGetReady entry point not found in the library of links dynamic wlanapi.dll

  What is apsGetReady?     Do I need?   If yes how can I do?  If this is not the case, how can I remove the window error message.

  """""""""""""""""""""""""""""""""""""""""""'''

  Wzcsldr2.exe found entry point

  the apsGetReady entry point not found in the library of links dynamic wlanapi.dll

  """"""""""""""""""""""""""""""""""""""""""""""""

  Hello

  1. When you receive this error message?
  2. you did it before the issue of any material changes or software?
  3. what service pack and antivirus are installed on your system?
  4. What is the brand and model of the router you are using to connect to the Internet/network

  5 are you facing problems to connect to the Internet or to the network?

  6. are you using any third-party wireless / network in the System Manager software?

  Method 1:
  

  Step 1: Boot your system in 'Safe Mode with networking' and check if you get the same error message. Then review the article mentioned below to do so:
  A description of the start in Windows XP Mode options:
  http://support.Microsoft.com/kb/315222

  Step 2: If you receive any error in safe mode, please boot your system to the boot and see if the problem still occurs in this mode. Try now to the KB article to perform the clean boot:
  http://support.Microsoft.com/kb/310353
  Important: After you use the clean boot in order to solve your problem follow the steps in the "steps to configure Windows to use a Normal startup state" section to start your system in normal mode.

  Method 2: Please see Using D-Link, if you use D link router.
  http://www.Dlink.com/support/default.aspx

• I am trying to install a program and I get entry point getdlldirectoryw could not be found in the library of links Dynamics kernel32.dll file and the same for shreggetvaluesw to shlwapi.dll

  I am trying to install a program and I get entry point getdlldirectoryw could not be found in the library of links Dynamics kernel32.dll file and the same for shreggetvaluesw in shlwapi.dll. How can I fix the problem.

  You have all your current updates?
  Go to windows updates and see if there are updates that you do not have installed.
  The error message seems to indicate that your copy of XP has not been updated.

  Updated and let us know if you still receive the error message.

  Thank you

  Marilyn

• "... SHRegGetValueW not found in the library of dynamic links SHLWAPI.dll. »

  Message error "the procedure entry point SHRegGetValueW be found in the library of dynamic links SHLWAPI.dll". I get this error message after downloading it and pre-installation of IE 8.  Compared SHLWAPI found on HD with SHLWAPI on OS installation disc after doing a SFC/scannow and found them manually in the difference.  Copied the body of SHLWAPI on disk and subed in the file on hard disk.

  Using IE 6 I am unable to update to SP3 after finally succeed to install SP1a by using Micro... Update.  The analysis concludes several minor updates and it fails to install those... repeatedly!  This is done after / because of a clean installation where Win2000Pro was the previous operating system.

  It is said "the mind goes first" and this is perhaps what is wrong, because I installed clean OS on dozens of comps with no problem al all.  H E LLLL PPP!   All thoughts will be performed and considered a fix... until it doesn't

  Positive thinking... T to all for your help and your review!

  909090... J

  Message error "the procedure entry point SHRegGetValueW be found in the library of dynamic links SHLWAPI.dll". I get this error message after downloading it and pre-installation of IE 8.  Compared SHLWAPI found on HD with SHLWAPI on OS installation disc after doing a SFC/scannow and found them manually in the difference.  Copied the body of SHLWAPI on disk and subed in the file on hard disk.

  Using IE 6 I am unable to update to SP3 after finally succeed to install SP1a by using Micro... Update.  The analysis concludes several minor updates and it fails to install those... repeatedly!  This is done after / because of a clean installation where Win2000Pro was the previous operating system.

  It is said "the mind goes first" and this is perhaps what is wrong, because I installed clean OS on dozens of comps with no problem al all.  H E LLLL PPP!   All thoughts will be performed and considered a fix... until it doesn't

  Positive thinking... T to all for your help and your review!

  909090... J

  First of all, you can not install SP3, except if you have SP2 installed successfully. Since you have SP1a, you need install SP2, then try to install the SP3 and IE8.

  In addition, this can happen if your SP service pack is damaged/corrupted.

  You receive an "Explorer.EXE - Entry Point not found - the procedure entry point SHCreateThreadRef is not found in the library of dynamic links Shlwapi.dll" error message after you install the MS04-038 security update
  http://support.Microsoft.com/kb/888162

  Installation of Windows Internet Explorer 8 on a Windows XP-based or a Windows Server 2003 computer returns error: "SHRegGetValueW procedure entry point is not found in the library DLL SHLWAPI.dll."
  http://support.Microsoft.com/kb/972264

  NASS - http://www.nasstec.co.uk

• the procedure entry point is not found in the library of dynamic links SHLWAPI.dll / unregistered class?

   I found a question similar to this but need more specific assistance. As I turned on my computer, a window pops up saying "the entry point of procedure not found in the library of dynamic links SHLWAPI.dll." This message has not left since and my computer let me just open google chrome. I have not tried to install anything lately. I tried what was suggested on a similar response - the sfc / scannow command-, but when I tried, it said I had to be an administrator. This confuses me because there is only a single user account on this computer so I assumed it was the administrator. When I tried to open the control panel to check, my computer would not leave a message with a lot of random numbers and letters and 'class not registered' jumped upward and me. I'm really confused and need help!

  Hello Elle1234,

  Looks like DLL file or the missing link between the Dynamic link Library & the missing registry entry. To replace the Dll files missing please go ahead and run the scan by following the simple steps below using the System File Checker tool and check if it does the trick.

  To help resolve this problem, use the tool (SFC.exe) System File Checker to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator.  If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER: sfc/scannow (Yes there is a space after sfc) the sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. This analysis do take some time to complete.

  Hope this review helps you. Let us know anyway. Make it a great day!

  "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• The procedure entry point UXCore.dll! 0CDUIDialog@@QAE@XZ is not found in the library of dynamic links UXCore.dll

  The procedure entry point UXCore.dll! 0CDUIDialog@@QAE@XZ is not found in the library of dynamic links UXCore.dll...  What can I do to resolve this problem in Windows Live Mail?

  See if trhis is useful:

  https://windowslivehelp.com/thread.aspx?PostID=1549d01b-5419-41f8-ACCB-31b7e0e36383#1549d01b-5419-41f8-ACCB-31b7e0e36383

  Tom Ferguson

• Startup error: wlstartup.exe the proecedure entry point is not found in the library of dynamic links UXCore.dll

  Original title:wlstartup.exe

  What follows is popping up on our computer when to start-"the proecedure entry point? GetHeight@CRMImage@@QBEHXZ not found in the library of dynamic links UXCore.dll"- what's going on and how clean us this up - thank you

  Hi chattums,

  (1) since when are you facing this problem?

  (2) remember to make changes to the computer before this problem?

  Method 1: Issue of wlstartup.exe could be caused by an installation Windows Live damaged or broken; You can see the steps by Joe Cap and Halima S, in the link below that relates to a similar question.
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/55aa850a-e2d3-4816-820F-5caf0a766b44

  Method 2: Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• ArcCon_GetConnectVersion is not found in the library of dynamic links ArcCon.dll

  Actual title: ArcCon .ac-Entry Point not found error

  Hello, I get the error "The ArcCon_GetConnectVersion be found in the library of dynamic links ArcCon.dll" every time that I reboot my laptop.  I tried to uninstall my ESPON scanner software and reinstall. It eliminates the error when the computer is turned on but whenever I restart the system, I get the same message as previously wrote... Please help me to remove this every mistake of banner of 5 sec.

  Thank you

  Frank M

  Hello

  -Did you do changes on the computer before this problem?
   
  I suggest to maintain the computer in clean boot mode and check if the problem persists.
  A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:
  http://support.Microsoft.com/kb/929135
  Note: After the troubleshooting steps, see step 7 in binding boot is a way of putting your computer to normal startup mode.
   
  Hope this information helps.

• Error Acrobat.exe - point of entry not found the procedure entry point PropVariantToString could not be found in the library of dynamic links Propsys.dll

  When you try to save a file that I changed, the file will not save and I get the following.

  the procedure entry point PropVariantToString could not be found in the library of dynamic links Propsys.dll

  New computer Windows 7, the new standard Acrobat installation.

  How can I fix it?

  Hi koko,.

  This happens with a specific file?

  Have you tried to update Acrobat on the last patch v11.0.09 and verified?

  If it please try to repair Acrobat in the 'Help' menu and check if you still faces questions.

  Kind regards

  Rave

• Msgrocm.dll Setup library could not be loaded, or function OcEntry could not be found. Please notify

  I seem to have a problem with getting to the section Adding Windows /Remove. components Whenever I try to click on windows control panel Add/Remove programs/add components configuration, the following message appears; Msgrocm.dll Setup library could not be loaded, or function OcEntry could not be found. Please notify

  Hi jaderob,

  Follow the steps and check the results below:

  a. Click Start, point to control panel and then click System.

  (b) in the Advanced tab, click Environment Variables.

  c. under System Variables, click path, and then click on edit.

  d. click in the Variable value box, and then press END to move the insertion point at the end of the Variable value box.

  e. Type; % SYSTEMROOT%\SYSTEM32\WBEM, and then click OK.

  f. click OK and then click OK.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Since the update to iTunes 12.4.1.6 I don't see my purchased music. When I try to import my old playlists I get a message saying that the library is not a valid iTunes library. Thus, thousands of songs and hundreds of films and I can't see or play one.

  Since the update to iTunes 12.4.1.6 I don't see my purchased music. When I try to import my old playlists I get a message saying that the library is not a valid iTunes library. Thus, thousands of songs and hundreds of films and I can't see or play one. I see my movie library where it is stored on an external hard drive, but my music was on my iMac.

  Where all the playlists gone and why didn't appear my entire music library? I checked the preferences and iTunes points to the correct folder, BUT only my music purchased appears...

  Same thing happened to me. I tried to replace iTunesLibrary.itl with an older copy, but that has not worked. Then I tried to return a version by resetting the Time Machine's iTunes app, but it would allow me to edit or delete iTunes because it is part of Mac OS X.

  So, I can not sync my iPad or iPhone, update all apps or find my music, that is, the course of the odf, still on my hard drive. ITunes just can't see the library.

  The difficulty of this Apple.

• In the Finder, the library is not appear in menu go.

  I am struggling with the Finder on my Macbook Pro (13-inch, mid-2012) running OS X El Capitan 10.11.3. I'll try to find ways of models and other folders that are supposed to be under Macintosh HD/users/Rebecca/library, but when I try to navigate to users/Rebecca, the library does not appear. I try to find the menu go to the Finder, and it does not appear. If I Tape Library in the search bar and to hover on the options, it shows it in the menu reach. Then I try to find without looking, and he's gone. How can I get the library display where it should appear?

  Press the Option key when the Go menu is open. Otherwise, choose go to folder and provide ~/Library as the path.

  (140952)