CALLBACK functions in cvi

Similar Questions

• How can I build a dll containing that a callback function, the callback function is used in CVI.

  Hello

  Case is that LABVIEW receive external data and produce an interrupt, then sends the data to the CVI.

  Can I generate a dll containing a callback function, use the callback function in CVI. Or there is a better way?

  Thank you

  
  

• How to get out of the callback function key before it complete the LabwindowsCVI

  Hi all

  In my program I use the command button (called SCAN) to analyze the setting on the serial port. When I press SCAN button callback fuction starts to send command on the series for the scan on the serial port setting. There are 99 order send and read. It takes about 3 minutes. It works very well. Now, I want to stop scanning and exit the callback function that is called by the button SCAN. Now when I press the SCAN button that it completes all 99 recommend and control then come to the interface user. So I'm not able to stop and get out of this loop. Y at - it a why to exit this loop if the user wants to get out? otherwise it will finish the scan.

  -Vishnu

  Hello

  I'll give you 3 options:

  1. If you want to go programaticly you can use simple break when stopping 'event' occur.

  2. If you want to go with a Cancel button, you can use this post:

  http://forums.NI.com/T5/LabWindows-CVI/few-general-CVI-questions-how-the-compiler-works/m-p/1440984

  where I already asked that it is not the recommended option for the panels.

  3. the best option is to use the multi threading separate each button in thread...

• The callback functions control array?

  My apologies for my basic question.

  I'm experimenting with control arrays and so far able to collect data in controls of a string that is contained in the tables of controls.  Works well.  Of course, none of these controls need callback functions.

  Now, I need a few momentary controls in a control array as well.  So my question is, should I use a single callback for all button controls function in this unique table?  And if so, how can I do to determine which element in the control array called the function?  Reading the forums, it seems as if the use of the data parameter of the callback could happen to me.

  I just wanted to ask before we get off the track.  Thank you!

  Yes, callbackData can be useful in such a situation, but if you can limit to switch to array index to distinguish what to do the recall of your button might be something on this line:

  int CVICALLBACK BtnAttayCallback (int panel, int control, int event,
          void *callbackData, int eventData1, int eventData2)
  {
      int    handle, index;
  
      switch (event)  {
          case EVENT_COMMIT:
              handle = GetCtrlArrayFromResourceID (panel, control);
              GetCtrlArrayIndex (handle, panel, control, &index);
              switch (index) {
                  // Your code here
              }
      }
      return 0;
  }
  

  (No CVI install here so I can't test it: check the code, but it should work reasonably)

• Put in command button Mode loses the callback function

  NOR expensive.

  I have a code I want to change the buttons toggle robot (according to different scenarios). However, if I put the command Mode of the button disabling at VAL_INDICATOR or VAL_NORMAL for this button, the callback function ceases to be called when the button is pressed.

  What is the defined behavior?

  I use 8.0.1 (356) CVI

  Kind regards

  Brian

  Yep, the VAL_HOT did the trick.

  A big thanks to dsappet and jr_2005 for taking the time to investigate this.

  Much appreciated!

  Kind regards

  Brian

• leak memory with the callback function

  Hello

  I'm pretty new on LabWindows and library ninety, I worked mainly with LabVIEW.

  I am trying to create a basic c++ client (no GUI) that sets up subscriptions to several network publication of a PXI DAQ data variables.

  The data for each variable is sent in a cluster and contains different types of data with a 2D array large int16 for the acquired data (average size of array is 100 k in total, and the average time between the data being sent is 10ms). I have an average of 10 of these variables DAQ.

  I'm passing the same callback function as an argument to all of these subscriptions (CNVCreateSubcription).

  He reads all the correct data, but I have a problem is that I have a memory leak in the callback function in the CNVCreateSubscription.

  I have reduced the line of code one and found the function that actually causes the memory leak, it's a CNVGetStructFields(). At this point in the program data has not yet been adopted for the variables of the customers.

  It is a simplified version of the callback function, where I just unzip the cluster and get data (showing only a field in the cluster in the example, showing also doesn't not the decleration).

  The function is passed in the function to subscribe, as follows:

  public static void CNVCALLBACK SubscriberCallback(void * handle, CNVData data, void * callbackData);

  CNVCreateSubscriber (url.c_str (), SubscriberCallback, NULL, 0, CNVWaitForever, 0, & Subscriber);

  public static void CNVCALLBACK SubscriberCallback(void * handle, CNVData data, void * callbackData)
  {

  int16_t daqValue [100000];

  unsigned long int nDims;
  unsigned long int daqDims [2];
  CNVData fields [1];
  Type CNVDataType;
  unsigned short int numFields;

  CNVGetDataType (data, & type, &nDims);)
  CNVGetNumberOfStructFields (data, & numFields);
  CNVGetStructFields (data, fields, numFields); //<-------HERE is="" the="" problem,="" i="" can="" comment="" out="" the="" code="" after="" this="" point="" and="" it="" still="" causes="" a="" memory="">

  CNVGetDataType (fields [0], & type, &nDims);)

  CNVGetArrayDataDimensions (fields [0], nDims, acqDims);
  CNVGetArrayDataValue (fields [0], type, daqValue, daqDims [0] * daqDims [1]);

  CNVDisposeData (data);

  The average settings, I use all my memory systems (4 GB) in time.

  My question is, all else have experienced this and what might be the problem/solution to this?

  Thank you.

  I see that you disable only handle memory (data), but not the memory of the structure; Therefore, before calling CNVDispose (data) you should have something like

  While (numFields > 0)
  CNVDisposeData (fields [-numFields]);

• incomplete documentation of the Callback function plans

  The third paragraph of (CVI2010) help with callback function plans says:

  The main callback function is the only type of callback function that responds to the EVENT_END_TASK. Windows only, this event occurs when the user tries to exit Windows.

  This information seems incomplete: EVENT_END_TASK also occurs if the program is closed via the taskbar button.

  Thanks, Wolfgang. We'll fix it.

  Luis

• How to run progamatically of callback functions

  Title says it all.

  I want to execute a callback to a command by programming button. How is that possible?

  Hello

  It's pretty simple: you call the callback function...

  For example, if it is defined as an int CVICALLBACK QuitCallback (int command face, int, int event, void * callbackData, int eventData1, int eventData2)

  You can call the function as QuitCallback (Panel, control, event, callbackData, eventData1, eventData2), where you will need to use the appropriate panel and control the ID. For the event, you can provide the type of event you want to simulate, for example EVENT_COMMIT. If you do not need a callbackData, eventData1, eventData2, you can specify zero. In summary:

  QuitCallback (panel_ID, control_ID, EVENT_COMMIT, 0, 0, 0);

  Wolfgang

• Access the value of an another file callback function

  I have a callback function, where to get the current value of a control in a main.c.

  GetCtrlVal (panelHandle, PANEL_RINGSLIDE_1, &p);
  

  I have another file (test.c) in the same folder. I need to use the value of & p in the file test.c. How is that possible?

  I have understood #include main.c in the file test.c but not working.

  Any ideas?

  In applications that use multiple source files, it is advisable to have a set of common definitions that covers all of your project. So, for example, you could have a "common.h" file, which is #include'd files test.c both your main.c. In this file common.h, you might have a statement:

  extern int p;

  This indicates to the compiler, for each of your steps in compilation of file c, the variable p is defined somewhere else and do not worry about this. Now, in a few of your .c files (not really matter which), you then have to declare the real variable p:

  int p;

  So now, when you reference an upside in one of your modules, you refer to the same variable across the whole project. (It is probably best to use a longer, more descriptive name for the variable instead of just p - this avoids possible confusion as your program grows in complexity).

  JR

• allows you to set the callback function to extension webworks

  I see in BBM webworks API, the callback function (blackberry.bbm.platform.onaccesschanged) is defined as a field variable, then call the register function.

  Is the only way to pass a callback to webworks?

  You can pass a callback function as a parameter to a function call?

  In my exercise, I tried to define an acceptable extension webwork function a ScriptableFunction as one of the parameters.  When I pass the function() {alert("test")} as an argument, the webwork expansion feature does not work. The debugger displays the webworks function is not called when I try to get to the function as an argument.

  June

  Hi June,

  A callback function right at the method as fact in good number of our API, you can actually pass. On the top of my head, take a look at the readFIle API. You can find the source of the code here - https://github.com/blackberry/WebWorks/blob/master/api/io/src/main/java/blackberry/io/file/ReadFileF...

  You should be able to move from the ScriptableFunctions back with no problems

• Clientdata bad pointer in a callback function

  Hello

  I'm trying to pass a data object to a callback function when the load a document.

  This is my code:

  AVAppRegisterNotification (AVDocDidOpenNSEL, gExtensionID, ASCallbackCreateNotification (AVDocDidOpen, (void *) myNotificationCallback), (void *) & aClientData);

  The callback function is the following:

  ACCB1 Sub ACCB2 myNotificationCallback(void *clientData)

  {

  ....

  }

  However my address pointer in the callback function clientData is not the same as the address when I put it in the AVAppRegisterNotification function.

  How is that possible?

  Consider, for example: the recall will need to know what AVDoc is just opened, which is not possible if the only parameter is clientData.

• Debugging of the callback functions

  I'm fine with my comments?

  Ordinary (unnamed) callback functions are all listed as (for example) onClick() in ESTK functions pane. In addition, local variables in these functions are not in the data browser. So in my humble OPINION of debugging is not possible.

  So I tried the method with named callback functions that avoids these two disadvantages:

  Callbacks without a name	Named callbacks
  myDlg.btn2.onClick = function() {   $.bp(true);   aLocal = "gugus";   if (this.text == 'Disable Him') {     this.text = 'Enable Him';     myDlg.btn1.enabled = false;   } else {     this.text = 'Disable Him';     myDlg.btn1.enabled = true;   } }	myDlg.btn2.onClick = ActButton2; // ... function ActButton2 () { $.bp (true);   var aLocal = "gugus";   if (this.text == 'Disable Him') {     this.text = 'Enable Him';     myDlg.btn1.enabled = false;   } else {     this.text = 'Disable Him';     myDlg.btn1.enabled = true;   } }
  Œuvrant variable does not appear in the data browser	Variable Œuvrant is listed in the data Explorer
  The functions are named onClick in the functions pane	Functions have separate names in the functions pane
  callback functions are within the window function	callback functions (are) / (maybe) outside the window function

  Of course, the names for the named callback functions must be unique for the script.

  What version of FrameMaker do you use?

  Now, I see your problem:

  You can't do something like this:

  wPnlN.p0.b1.onClick = Button1p (whatIsThis, outerParm) ;
  

  Means: you cannot pass parameters to this function here. Otherwise, the function is executed immediately.

  wPnlN.p0.b1.onClick = Button1p; // no brackets!!!!!!
  

• Different types of EventListener, same callback function?

  I'm doing so that the user can press any key or click anywhere to continue. I want my KeyboardEvent and MouseEvent listeners have the same callback function to continue, but it won't work because the callback function must have the right kind of event as an argument. Is it possible to do with a reminder function? I can do it with two.

  You can use the event rather than specify keyboardevent/mouseevent in the argument of functions.  then in the body of function test what type of event is received and cast if you need:

  function yourlistenerF(e:Event):void {}

  If (e is KeyboardEvent) {}

  You can use KeyboardEvent (e) .keyCode etc.

  } else if (e is MouseEvent) {}

  You can use MouseEvent (e) .mouseX etc.

  }

  }

• Can what information I leave the descriptor in the event callback function?

  I have a plugin automation "A-plugin" when starting it uses AddNotify to set a reminder in waiting for an event to filter:
  sPSActionControl-> AddNotify (pluginRef, eventFilter, reminder, this);

  Then run a plug-in "B-plugin" filter, callback function will be called:
  void CallBack (DescriptorEventID eventID, PIActionDescriptor desc, PIDialogRecordOptions opt, void * data) {...}

  As a reminder, how can I get enough information of the "B-plugin" that raise the event? I knew that A plugin can get the name of the plugin-B, just use "keyUsing" as the key to query the descriptor, if the value of the result is the name of B-plugin, I'll do more surgery. But this method is not reliable because it is hard coded, the B-plugin name may change (e.g. in another language). So someone knows it is it possible to get specific information from the B-plugin? Any suggestion will be appreciated.

  For filters of the event ID must be unique. Or in other cases of plug-in keyUsing ID must be unique.

  Make sure that generate you a unique id for your filter and that place in your resource HasTerminology. Then use this resourceID and StringIDToTypeID to get your event ID. Now, your callback is called only for plug-ins and you know it's B-plugin. Because plugin A and plugin C and X-plugin you have generated a different id to use.

  It's AutomationFilterPiPL.r, the 'AuFi"is ignored because that Photoshop found a string as the fourth parameter id.

  You can use four character codes, but the chances of you be unique becomes less likely.

  HasTerminology

  {

  "AuFi."

  "AuFi."

  16000,

  'adc931a0-cfe2-11d5-98bf-00b0d0204936 '.

  },

• How to cancel a callback function when it is run in CVI?

  Hi, guys.

  I am a user of LabVIEW and intesrting in CVI recently.

  See my attached that question please. It's so easy in LabVIEW, but it bothers me for several days.

  NUM would increase 1 and 1 second per iteration delay after clicking the run button.
  My question is,
  Is it possible to interrupt the function of Run_callback by clicking on the Stop button when the loop is running?
  If Yes, could you please help modify my example.

  Thank you.

  Hello-

  To answer your question, indirectly, a better way to achieve what you are looking for is maybe thanks to the use of a timer.  You could place a timer on your UIR and set the interval to 1 second.  This timer calls a routine in your code at the interval that you set.  Then you just select or clear reminders for the run button and switch to stop timer.  I modified your example and attached it below.  Let us know if you have any questions!

  NickB

  National Instruments