Calling a procedure stored since SQL * PUS

Similar Questions

• call a procedure stored since SQL developer UI

  I have a stored procedure that is created with a date in parameter.

  Then I tried running SQL Developer by right-clicking the stored procedure, then it comes out a parameter window and I tried to enter the value in the entry value field by entering January 1, 2015 "because I know our server date format is DD-MON-RR."

  But it shows a window of incorrect format: Please use date format YYYY-MM-DD,

  Why is this?

  The generated SQL Developer code is less after I ' 2015-01-01'

  DECLARE
  DATE OF P_DATESTORED;
  BEGIN
  P_DATESTORED: = to_date('2015-01-01','yyyy-MM-dd');

  MySproc)
  P_DATESTORED = > P_DATESTORED
  );
  -restoration;
  END;

  I can just use below: for the date, the Server format is DD-MON-RR.

  Begin

  MySproc('01-JAN-2015')

  End;

  Thank you

  We use oracle 11g 2, the window environment.

  The code is generated (SQL Developer) client-side. This code generation, by design, does not count the current NLS_DATE_FORMAT of the session. Instead, it uses the date coded hard YYYY-MM-DD format. It seems to be a design decision.

  If you want to enter this date value in a particular format, use the following snippet directly in the SQL worksheet (F5: run script), modified for your desired date format, or omitted date format - I really discourage the to do.

  DECLARE

  DATE OF P_DATESTORED;

  BEGIN

  P_DATESTORED: = to_date ('& myinput', 'YYYY-MM-DD');

  MySproc)

  P_DATESTORED-ONLINE P_DATESTORED

  );

  -restoration;

  END;

  /

• CALL THE PROCEDURE IN THE SQL STATEMENT

  Why we cannot call a procedure inside the SQL statement?

  Hello

  Usually when you select an item should return you data. In the case of a procedure, you cannot return any return value from the procedure directly it has to be done through some settings and to access these settings, you cannot use a simple sql statement. Where as in a function, you must return one of data that can be easily obtained accordingly.

  see you soon

  VT

• Pass an array to a procedure stored via SQL more.

  Hi, I want to spend multiple records in a table to a store proc, where inside, I'll do some DML (insert update delete etc...)
  Later the RECS will be forwarded by my application using VB/ASP etc
  Currently, I want to test this backend... I have a package and a proc.
  But when I call the proc, I get a wrong number of aruments to proc.
  
  
  CREATE or REPLACE PACKAGE in the UPD_All_TABs
  TYPE Varry_emp IS TABLE EMP % ROWTYPE;
  PROCEDURE UPD_emp (SheikYerbouti in Varry_emp);
  end UPD_All_Tabs;
  /
  
  Package created.
  
  CREATE or REPLACE PACKAGE BODY UPD_ALL_Tabs as
  PROCEDURE UPD_emp (SheikYerbouti in Varry_emp) is
  Start
  I'm looping 1.emp_rec.count
  dbms_output.put_line (emp_rec (i) .nvd_zobjdev);
  /If otherwise etc here end if * /.
  end loop;
  END UPD_emp;
  /
  
  
  / * I made a copy of the emp table and modified data. Now I'm selecting and passing
  It internal tmy * /.
  
  declare
  Type add_varray IS TABLE OF THE emp % ROWTYPE;
  var_add_varray add_varray;
  Start
  SELECT * COLLECT LOOSE var_add_varray FROM tab_copy_of_emp;
  UPD_ALL_Tabs.UPD_emp (var_add_varray);
  end;
  /
  / * This call proc does not work as a type of arguments * /.
  
  / * However this sub work... displays all REBS copy table * /.
  declare
  Type add_varray IS TABLE OF THE emp % ROWTYPE;
  var_add_varray add_varray;
  Start
  SELECT * COLLECT LOOSE var_add_varray FROM copy_of_emp;
  FOR pos IN 1.var_add_varray.count LOOP
  dbms_output.put_line(pos||) e '|| var_add_varray (POS) .emp_name);
  end loop;
  end;
  /
  
  I have seen 100s of pages & fourms I don't have a simple solution... all use java or speak to the application.
  If someone had used sql in addition, the examples show a list of hard coded values.
  If there is an example of selection in bulk, its inside the proc is stored.
  I want to call the proc as I have used before.
  Please guide me what is the problem by calling the proc,
  If java is necessary, please give me sample for the above code...
  Please please help. I'm totally lost.

  Maybe this will help you. He is little syntax errors in your code corrected too, those.

  CREATE OR REPLACE PACKAGE UPD_All_TABs AS
  TYPE Varry_emp IS TABLE OF EMPLOYEES%ROWTYPE;
  PROCEDURE UPD_emp(emp_rec in Varry_emp);
  end UPD_All_Tabs;
  
  CREATE OR REPLACE PACKAGE BODY UPD_ALL_Tabs AS
  PROCEDURE UPD_emp(emp_rec in Varry_emp) is
  begin
  for i in 1..emp_rec.count loop
  dbms_output.put_line(emp_rec(i).FIRST_NAME);
  end loop;
  /*if else etc here end if*/
  END UPD_emp;
  END UPD_ALL_Tabs;
  
  declare
    -- Non-scalar parameters require additional processing
    emp_rec upd_all_tabs.varry_emp;
  begin
  SELECT * BULK COLLECT INTO emp_rec FROM EMPLOYEES;
    -- Call the procedure
    upd_all_tabs.upd_emp(emp_rec => emp_rec);
  end;
  

• Date Format question - calling a procedure stored on the side of java

  What is the best approach to managing a DATE as a parameter to a procedure?
  
  (1) the emp table has a column called hire_date and its data type is DATE.
  (2) the procedure has tried to retrieve all employees hired on a specific date, there is a parameter called p_hire_date, type what data it should use? Something like p_hire_date IN emp. HIRE_Date % TYPE? < == is that correct?
  (3) both within the body of the procedure, during the recuperation of registration,
  SELECT first_name, last_name
  FROM EMP
  Where hire_date = p_hire_date < == is that correct? or when should I use to_date()?
  
  (4) on the coast of Java, when you call this procedure, what data type the hire_date is?
  
  Thank you
  new2Oracle

  Hello

  Procedure seems correct, do not use to_date.

  Switch argument as a java.sql.Timestamp.

  (Or java.sql.Date If you are absolutely certain that you DATE of Oracle is a component "hour")

  Concerning
  Peter

• How to call pl/sql procedures stored since AMImpl

  Hi, I worked with regular procs which of output params and primitive types like number, Varchar2 etc.

  But how to pass values of procs of pl/sql that contains custom data types, such as VARCHAR2_TABLE_100, you will find the definition below.

  create or replace

  TYPE 'VARCHAR2_TABLE_100' is the table of varchar2 (100)

  How to pass values for the parameter entry if type is of the above type, suspicion or the thought is appreciated.

  Thank you.

  I tried to use registeroutparameter(10,Types.ARRAY,"VARCHAR2_TABLE_100");

  But I get a number of entries or incorrect exception types. I thought it's because the output variable does not properly.

  Try it with the fully qualified name ('YOURSCHEMA.) VARCHAR2_TABLE_100')

  Also note that the index in jdbc start from 1 (not 0) and if you have the first parameter plsql function's return value of function.

  For example, if you have the plsql function: "function somettype return of some_func (p_param to varchar2_table_100);

  to enter p_param you need something like: stmt.registerOutParameter (2, OracleTypes.ARRAY, "SCHEMA. VARCHAR2_TABLE_100')

  Dario

• Call a procedure stored via JDBC with a REF CURSOR * input variable.

  Hello
  
  S/n of my client has provided me with a stored procedure that I need to call to get information about products prices. Something along the lines of:
  
  some_package.getPrices (products IN OUT csr_type);
  
  where csr_type represents a REF CURSOR. This cursor has a product ID column and a price column. The plan is to move the cursor with the populated product id column and have the routine decorate the slider with the prices.
  
  The setting in this plan is that it seems that it is not possible to go from JDBC REF CURSOR in . However, I'm not sure, since I can only find throw comments on various forums (e.g. http://www.orafaq.com/forum/t/35088/0/), without any reference. If I go back to the client and tell them that their idea will not work, I prefer to be able to point them to a documentation somewhere
  
  So I guess my questions are:
  
  1. it is indeed impossible to pass a REF CURSOR type as a variable input on JDBC to a stored procedure?
  
  2. is there information I can do about my client?
  
  3. am I on the right track thinking I need to go down the path of an array of objects?
  
  Thank you very much to anyone who can help
  Peter Svehla.

  Hi Peter,.

  I see it, missed that you actually want to pass in a list of products. Don't think that you can do this with the current procedure. A slider is just a pointer to a result set.
  How the result set is created and what it looks like, is determined when the cursor is opened.

  What does this procedure with the cursor? -It does not have some OPEN TO ; inside?

  Or, perhaps, you are supposed to send in an open cursor (does not much sense to me)?

  Concerning
  Peter

• Call a procedure stored in PS cs3

  Hello
  
  someone has already seen such a strange code (in my view) screenshot ? This code was generated in cs3 adding a record set with a server behavior. In the window 'record set', I see all the parameter differently on the right. But in the source code, I see just '? ' and 'settings' with automatic numbering.
  
  Is it okay then? Or a bug to adobe? should not be too the names of the parameters in the command text?
  Yet is this work correct? I think that the parameters must be in the same order as in the stored procedure (MS - SQL)?
  
  Another question: is it true that I have to set the size of a parameter in the source code? (When I use the function 'command' rather than the licence feature has I can add size in the window also developing.) Is this works is not in the folder defined in the window?
  
  (BTW: I tried to use the "order server behav." but I did not return the recordset - so opt for the 'Recordset behav', but here I can not change the size...)
  
  thx for any help in this
  Sebastian
  

  "eFscl" wrote in message
  News:f58b74$6MP$1@forums. Macromedia.com...
  > Hi there,
  >
  > has anyone seen such a strange code (from my point of view)
  > http://www.imagehosting.com/out.php/i792345_screenshot.jpg already? This
  > code
  > has been generated in cs3 adding a record set with a server behavior. Within the
  > the
  > window 'record set' that I see all the parameter differently on the right. But within the limits of the
  > source
  > code I see just '? ' and 'settings' with automatic numbering.
  >

  It's normal. ADO (the layer between your ASP pages and OLE DB
  provider for the database) only supports the transmission of position parameters, and
  the parameters are marked with a? in the command text.

  > Another question: is it true that I have to set the size of a parameter
  > in the source code? (When I use the function 'order' instead of the)
  > Adjustment disc I can add the size of the window in development too. Is
  > This is not
  > working in the record window?

  I do not believe, but ADO supports certain configurations of parameters which
  the translation of "I don't know, ask the waiter." The recordset behavior may be
  help of these.

  > (BTW: I tried to use the "order server behav." but I did not back)
  > the
  > save set - so opt for the 'Recordset behav', but here I can't change
  > the
  (> size...)

  The command object returns a set of records and is in fact how DW implements
  the behavior of recordset in DW CS.

• call a packed stored procedure from within another stored procedure

  I have a stored procedure (STROKEQC) on a scheme that is not in a package. I want to be able to call a procedure stored that IS inside a package on the same scheme of STROKEQC. When I try the syntax below, I get an error "no function with name 'PARTICIPANTSPECIFICEDITS' exists in this area." That the procedure exists.

  /*Generate admin field data*/
      execute immediate QCPROCEDURES.PARTICIPANTSPECIFICEDITS('ALL');        
      execute immediate QCPROCEDURES.GENERATE_SURGYEAR_ERRFLAG;

  Is not the way to do inside a stored procedure?
  
  Thank you!
  Eva

  Hi, Eva,.

  You need not EXECUTE IMMEDIATE to call a stored procedure (including a procedure in a package) on the other. Just use the name and the arguments (if any):

  QCPROCEDURES.PARTICIPANTSPECIFICEDITS('ALL');
  QCPROCEDURES.GENERATE_SURGYEAR_ERRFLAG;
  

  I guess qcprocedures is the package name, and participantspecificedits and generate_surgyear_errflag are procedures in this package.

  In case you're wondering, the error was probably because you do not have a variable called participantspecificedits. If you had a dynamic code in a string called variable x, then "EXECUTE IMMEDIATE x"; would be the way to run it.

• Creation of Adaptert DB to call the stored procedure in MS SQL server

  Hello
  
  I need to create a DB adapter to call a stored procedure in MS SQL Server.
  
  I went through the MS SQL Server database connecting wire
  
  He mentions that he must use a command line utility to generate the wsdl and xsd to call stored procedures in MS SQL server. Please indicate where this utility and how to use it.
  
  All links to tutorials are welcome.
  
  Thank you!!.
  
  Silas.

  The key is SOA_HOME\j2ee\home\connectors\DbAdapter\DBAdapter.jar.

  Make sure that the DBAdapter.jar is at this place

  in my case, it is

  e:\Oracle\product\soa\10.1.3\j2ee\home\connectors\DbAdapter\DBAdapter.jar

  see you soon
  James

• Call procedures stored in adf

  Hi all

  is it possible to call procedures stored in the adf.

  Thank you

  Hello

  It's my first chance to "pay it forward". Please visit this link (which helped me): Blog of Zeeshan Baig: the PL/SQL procedure call and function in the Oracle ADF application

  James

• ADF: Procedure to Pl/sql call prior to the loading of the page.

  Hello world
  
  I have a requirement to call a Pl/sql procedure prior to the loading of the page. I saw in google everywhere he gave to AMImpl but I want to call the Pl/sql procedure in init method().
  The procedure includes four SETTINGS.
  
  How can I do this?
  
  Wat should be the code?
  
  Please, help me get out of very new this.im for the ADF.
  
  Thank you.

  Dear user,

  Learn little by little the Big :) Book Oracle jdeveloper. It will help you.

  Articles of beautiful I can't forget never. :) thank us for these blogerr
  http://andrejusb.blogspot.in/2011/04/invoking-stored-procedures-and.html
  http://www.baigzeeshan.com/2010/05/calling-PLSQL-procedure-and-function-in.html

• Calling an Oracle stored procedure.

  Stored procedures have always given me trouble, I don't know why.

  I want to call a procedure from Oracle to a piece of CFML code.

  My CFML code:

  <cfstoredproc datasource="purload" procedure="PUR_XML_LOAD.load_raw" returncode="yes">
      <cfprocparam cfsqltype="CF_SQL_FLOAT" value="999" type="out">
  </cfstoredproc>
  

  The error I get:

  [Macromedia] [Oracle JDBC Driver] [Oracle] ORA-06550: line 1, column 18:
  PLS-00306: wrong number or types of arguments in the call to 'LOAD_RAW '.
  ORA-06550: line 1, column 7:
  PL/SQL: Statement ignored

  Test code PL/SQL that works with Oracle SQL Developer:

  DECLARE 
   foo NUMBER :=999;
  begin
    PUR_XML_LOAD.load_raw (foo);
    dbms_output.put_line('>' || foo || '<');
  end;
  

  The top of the stored procedure:

  create or replace
  PACKAGE BODY PUR_XML_load AS
  
  
     -- *** PROCEDURE: PUR_XML_load ***
     -- Loads values from previously-validated XML file
     -- into the raw_pur table
     PROCEDURE Load_raw (res_val OUT NUMBER)
     AS

  So, how can I make the code the same way CFML function that code PL/SQL?

  TIA

  Ian

  OK, maybe you're RTFMing, but maybe RWAS (read this as Adam Said) ;-)

  Does THIS work:

  
     
  

  ?

  --

  Adam

• Call of function/stored procedure of dashboards

  Hi all
  
  My requirement is to call a stored procedure /function of dashboard and display the result in the dashboard.
  
  I created a function that takes in 2 dates and restores the lines in this date range
  
  (1) creation of function
  
  create or replace FUNCTION FUNC3 (BDATE TIMESTAMP, EDATE TIMESTAMP) return as sys_refcursor
  R1 sys_refcursor;
  BEGIN open for r1
  SELECT * FROM EMP WHERE HIREDATE BETWEEN BDATE AND EDATE.
  Return (R1);
  END;
  
  
  (2) created a dashboard quickly start date and the end date and the variable defined as variable presentation 'Pre_B1Date' & 'Pre_E1Date '.
  
  (3) created a request directly to the database as
  
  SELECT FUNC3 (to_date (' @{Pre_B1Date} ',' YYYY/MM/DD hh: mi PM'), to_date (' @{Pre_B1Date} ',' YYYY/MM/DD hh: mi PM')) FROM DUAL
  
  (4) that I've created a dashboard with the above command prompt & demand live, but when I try to open the dashboard why the BI server is blocking down.
  
  gave me an error
  
  Error codes: OPR4ONWY:U9IM8TAC:OI2DL65P
  State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 12002] Communication to the socket call = recv error: (10054 = number) an existing connection has to be closed by the remote host. (HY000)
  
  Publ. SQL: {call NQSGetQueryColumnInfo (' EXECUTE the PHYSICAL "Con pool Scott" CONNECTION POOL SELECT FUNC3 (to_date ("@{Pre_BDate}","YYYY/MM/DD hh: mi PM"), to_date ("@{Pre_BDate}","YYYY/MM/DD hh: mi PM")) FROM DUAL')}
  
  
  have one never faced this problem?
  
  or is there another way to call a funcation stored dashboards, /procedure
  where you can pass the variables of the presentation and view the output put this /procedure function
  
  Thank you
  sangov

  Yes.

  You can't return a cursor in a column in a select statement. You must use a piplined function (also known as table function).
  http://gerardnico.com/wiki/language/PLSQL/plsql_pipelined_function

  You'll find yourself with:

  select * from FUNC3(BDATE,EDATE) 
  

  See you soon
  Nico

  Published by: gerardnico on July 31, 2009 11:35 remove the data type in the select

• How to call a stored procedure stored procedure

  Hello Experts,
  
  I need help, even if stored procedures. I tried to know without a bit of luck. Is it possible to call the stored procedure to another stored procedure? The problem is my boss want me to work on a stored procedure, but I do not have the appropriate privileges. He won't give me permissions either. He suggested that to a stored procedure and call this stored procedure after creating a new procedure. Is this possible? If Yes, how can I do it?
  
  I thank in advance

  ascheffer wrote:
  Without the "privileges", whatever it is, your features in other nesting procedures won't help.

  Anton

  Unless...

  It goes to an anonymous PL/SQL block to allow him to test its procedures. ;)

  SQL> ed
  Wrote file afiedt.buf
  
    1  declare
    2    procedure test_proc(p_var IN VARCHAR2) is
    3    begin
    4      dbms_output.put_line(p_var);
    5    end;
    6  begin
    7    test_proc('This is a test proc');
    8* end;
  SQL> /
  This is a test proc
  
  PL/SQL procedure successfully completed.
  
  SQL>