Calling ID mapping

Similar Questions

• nested function calls in mapping

  Hello

  I have a problem with the following mapping. It seems that the problem is that I have function call @getval nested within another call of function @hextobin. Is this some sort of limitation of GG?

  MAP: LAB4301. DBIRES_URMESS, LAB4301 OF THE TARGET. DBIRES_URMESS,

  SQLEXEC (ID, GG_NVLRAW4, SPNAME LAB4301. GGT_NVLRAW, PARAMS (val = @bintohex (URFLAG)), FATAL ERROR).

  COLMAP

  (

  URFLAG = @hextobin (@getval (GG_NVLRAW4.retval))

  );

  I am getting following error

  2014-07-31 13:05:20 ERROR OGG-00312 closing parenthesis missing for the COLMAP.

  I also want to add that URFLAG column is of type RAW.

  Thank you

  Tomek

  Hi Tomek,

  In GoldenGate a query must be written on one line. To split a statement from Oracle GoldenGate parameter into multiple lines, an ampersand ( & ) line terminator is required.

  Please, run the following query and check if the error persists.

  MAP: LAB4301. DBIRES_URMESS, LAB4301 OF THE TARGET. DBIRES_URMESS, &

  SQLEXEC (ID, GG_NVLRAW4, SPNAME LAB4301. GGT_NVLRAW, PARAMS (val = @bintohex (URFLAG)), ERROR FATALE), &

  COLMAP (URFLAG = @hextobin (@getval (GG_NVLRAW4.retval)));

  Kind regards

  Veera

• Display the current location on Blackberry Maps

  Hi all

  I have an application that displays a number of places on a map. I have create a situation with all the included sites document and then call blackberry maps. This all works fine, but I can't work on how to show the current location of the user and the sites that I spent in.

  Ideally, I would like to the user's location to display a small blue mark (like it on google maps) and sites to display as normal red pawns. Is this possible?

  Otherwise, I thought to put the current location in the rental document (which I did successfully for more information getRoute) but how then the user distinguished between their situation and sites? Is it possible to create custom pins?

  MapField gives you the opportunity to paint your own markers. I suggest that you look on this.

• Invoke Blackberry Maps using the location document

  Greeting, developers...
  I use call blackberry maps in my application using document location...
  I put 3 rental, my location, Room A and room B
  example:

  
  
  
  
  

  but my problem is
  1. how the development of the cards to my location (the first location)
  2. how to make the maps zoom? I use lbs document as above, but there is no zoom at all in blackberry maps...

  Any solution?
  Thanx

  Visit this link for more details on the books and the location tags.

  http://docs.BlackBerry.com/en/developers/deliverables/17954/Invoking_BB_Maps_using_a_location_docume...

  But to my knowledge, I Don t think centeralized zoom is not possible in this method of calling cards.

  There are many ways by which you can invoke the card / use mapField in your application. You must choose the right pair that meets your needs.

• How to call cards in the Playbook

  I want to call google maps on my playbook application then how can I invoke only

  To add your SWC in FB Burrito go to your project properties-> AS Build Path-> library path and click on: Add SWC and add the two files to download sdk.

  I put toghether a small code example that gives you a full screen Google Maps on your Simulator.

  package
  {
      import com.google.maps.controls.MapTypeControl;
      import com.google.maps.controls.ZoomControl;
      import com.google.maps.LatLng;
      import com.google.maps.Map;
      import com.google.maps.MapEvent;
      import com.google.maps.MapType;
      import com.google.maps.overlays.Marker;
      import com.google.maps.services.Directions;
      import com.google.maps.services.DirectionsEvent;
  
      import flash.display.Sprite;
      import flash.display.StageAlign;
      import flash.display.StageScaleMode;
      import flash.events.Event;
      import flash.geom.Point;
      import flash.display.Sprite;
      import qnx.events.QNXApplicationEvent;
  
      import qnx.system.QNXApplication;
  
      [SWF(width="1024", height="600", backgroundColor="#FFFFFF", frameRate="30")]
  
      public class GoogleMapsDemo extends Sprite
      {
          protected var _map:Map;
          private var _dir:Directions;
  
          public function GoogleMapsDemo()
          {
              super();
  
              stage.align = StageAlign.TOP_LEFT;
              stage.scaleMode = StageScaleMode.NO_SCALE;
  
              _map = new Map();
              _map.key = "YOUR API KEY";
              _map.url  = "THE URL YOU REQUESTED THE API KEY FOR";
              _map.language = "en";
              _map.setSize(new Point(stage.stageWidth, stage.stageHeight));
              _map.addEventListener(MapEvent.MAP_READY, onMapReady);
  
              _map.sensor = "false";
              addChild(_map);
  
          }
  
          private function onMapReady(event:Event):void {
              _map.addControl(new ZoomControl());
              _map.addControl(new MapTypeControl());
  
              _map.setCenter(new LatLng(40.736072, -73.992062), 14, MapType.NORMAL_MAP_TYPE);
          }
      }
  }
  

  Doesn't have much comment here, but the code should be pretty much self-explanatory. From here you should be able to countinue yourself.

  P.S.: I belive that you use different accounts for the display which is a little confusing.

• BB of Smartphones blackBerry maps for Torch 9860

  Hello

  I just got a BB Torch 9860 and tries to download maps of BB with no luck at all. I received the following message:

  «Sorry, your device does not meet the system requirements that are needed to support BlackBerry map»

  The only requirement that I see on the website is "* BlackBerry Maps is available on devices running the device software v4.1 and above.

  I already installed the latest version of the software.

  Any help is greatly appreciated!

  Thank you

  Yes, there should be a free BlackBerry Maps application. Did you accidentally delete it? Double check for you ensure that you are indeed missing it by pressing the search on the home screen button and simply type cards. There should be a green icon with a purple trail (this is how it appears on my Torch 9860).

  If it is stil missing, so the best way to get will out perform the following operations. Click on the link I provided in my post above. Download the OS by selecting the 9860 Torch in the menu dropdown. Once you have downloaded the file from the OS, install it on your computer.

  Then, on your computer, open Windows Explorer and navigate to C:\Program Files (x 86) \Common Files\Research In Motion\Apploader (if your computer is a 32-bit computer, you won't see the (x 86) folder - just go for the regular Program Files folder).

  Open the file named Loader.exe and connect your BlackBerry. Click Next, and then click Next again. The Application loader will now check your BlackBerry. Once this is done, you will be at a screen where you can select applications. Find the application called BlackBerry Maps, check the checkbox and continue by clicking next. This will add BlackBerry Maps on your phone.

  So now, just to be safe, I recommend first backup your phone. Although it is not necessary, it is recommended, just in case something goes wrong.

  Try and let us know if you have any problems.

• Is Stream.map () .map () a good idea?

  I wonder what is the best solution: Stream.map (A::b) .map (B::c) vs Stream.map (a-> a.b () .c ())?

  My belief is that one-> a.b () .c () is slightly more efficient, because there is a cost of installation and recovery to the writing of a lambda and he is also a bit of overhead to return a value in the data flow and to have sent to a lambda in the next step in the pipeline. However, I have not compared to this. My guess is that, as for the other question about the refs method vs lambdas, no performance difference will be negligible, and that the decision of the technique to be used must be based on clarity and style. If b() and c() are mostly foreign, then it could do to be more clear for the global pipeline to separate them into multiple calls to map().

  Note that it is likely that the current and foreseeable implementations for map (f1) .map (f2), for a given value of passage in the flow of data, functions f1 and f2 will be executed on the same thread. The cost of the passage of the return value of f1 as an argument to f2 in the same thread is simply a method call, while it would be raining a lot cool generals to replace this value to another thread running f2.

• Maps and layouts: update of the failure or will not erase

  Select Page layouts et Cards fail to update correctly. This is the case for the unreleased updates to with no associated collection and the unreleased cards with associated No. layouts. In addition, in some cases published layouts or maps indicate the status ""update failed, obsolete, "but the changes make their way to the app." This happens for some layouts and cards, but not all; In addition, some layouts and cards work fine for awhile and then fail to publish or will not erase. Is this a known issue? [using publish.adobe.com app 2015.2.100 version]

  Hey Kristen - Sounds complicated, and I don't know all the details completely, but I have had similar experiences and started to notice the following, especially with the cards and layouts.

  Scenario:

  I have a card and use it in a mapping rule for a layout. Everything is cool, work the way you want.

  Now, I want to remove the card (I am resetting things for a demo session and want to start without cards nor the updates page with the exception of the default values.)

  If I delete the card first, I get the message "Failed to update, obsolete".

  To avoid this or delete it, I need to remove all mapping rules in all page layouts that call the map and publish all these layouts (without the map reference.)

  So I new and remove the card.

  I followed a similar procedure for the removal of the page layouts-

  The value of all the collections so that none use the layout to remove

  Publish all the collections that are obsolete.

  Then you can new and remove the unwanted provision.

  It's probably pretty fussy, but it works.

  I've had similar experiences with items and collections. If an article or a collection is used in several collections, I would get a similar error. I had to work on what article or the collection has been used in several places before I could new and delete.

  Hope that helps

• Join condition of cube and other mapping missing mapping

  Hi David,
  
  I have a strange problem... After the creation of cube mapping tables defning and physical objects joins and the change of my mapping intermittently disappears... Not being able to trace what's happening. Is this a known bug or nothing is done correctly?
  
  Enjoy your previous answer.
  
  Thank you very much
  Paiva

  A "mapping" is a term of olap product management which means that the cube is not mapped to the level the fact sheet. For example, suppose you have tables like this

  CREATE TABLE SALES_FACT
  (
    DAY_OF_SALE DATE,
    PRODUCT_ID NUMBER,
    UNITS NUMBER,
    COST NUMBER
  )
  
  CREATE TABLE TIME
  (
    DAY DATE,
    MONTH NUMBER,
    QUARTER NUMBER,
    YEAR NUMBER
  )
  

  Suppose you want to analyze the data only at the level of the MONTH and more. In this case, you must set a time of hierarchy which includes levels MONTHS->->-> ALL_TIME YEAR QUARTER and you would need to define a join condition between SALES_FACT and TIME of the form

  SALES_FACT.DAY_OF_SALE = TIME.DAY
  

  This is sometimes called a "mapping" because it maps data in the AW to a higher level than what is stored in the fact (for example, the MONTHS instead of DAYS).

• See the map

  Hello

  Map view fell in CS4? (think it's called the map view - where it shows the hierarchy of files)

  Can't find anywhere thought he was on the files tab, but clearly

  Thank you

  Ian

  jen0dorf wrote:

  Hello

  Map view fell in CS4? (think it is called to see the map

  Yes. Several other features of earlier versions were dropped too.

  Deprecated features

  The following features have been deprecated for Dreamweaver CS4:

  • Calendar

  • Web services

  • Mode of disposal

  • See the site map

  • Java Bean support

  • Adobe® Flash (Viewer) elements

  • Adobe® Flash® and Adobe® Flash text buttons

  • Games records and ASP.NET and JSP server behaviors

  http://help.Adobe.com/en_US/Dreamweaver/10.0_Using/WS2C41F19D-502B-4fb5-8A54-4442E2127C84a .html

• Are there drivers available for Sat - Pro A300s this channel to use 12 & 13?

  We use Windows XP SP2 & SP3. The A300 that I use has a RealTek 8187 B wireless card.

  Our Organization has a number of Satellite Pro A200, A300, laptops computers L300.

  We have identified that there is a scouce of interference (we are unable to find the source) which blanks on channel 11 in a part of our site. I thought that the easy way would be to go to channel 13, because it is above the interference. Interference is on an extremely tight between the middle of the Ch9 & Ch10. frequency (I can connect the access point to a range of 6-12 "but cannot connect to 3')

  Our access points all know we are in Europe and so allow us to use the channel 12 & 13. our sniffer radio show transmitting them to channel 13, but laptop will not connect to them. I assume that the driver follows the American standard and ends at channel 11, who was born in the inf file that specifies the max 11 channel.

  Is there an easy way, we can use the channels 12 & 13, which are valid strings here in Europe?

  Hello

  I found very interesting paper Toshiba that explain why only 11 channels are available:

  Why is it not possible to use all 13 channels WiFi on a Toshiba WiFi card?
  http://APS2.toshiba-tro.de/KB0/FAQ35002P0001R01.htm

  + The European Standard ETS 300328 allows for 13 channels. A card that is able to use all of the 13 channels is a so-called "ETS-map" These cards-ETS can be used in Europe. +
  + In the USA and the Canada, there are only 11 permitted use WiFi channels. +
  + In Japan, there are 13 channels like in Europe. +
  + In order to use a WiFi card anywhere in the world, has created a so-called "WORLD Card" standard with 11 channels. +
  + WiFi Toshiba cards are 'Map world' standard class, which are allowed for use in the world. +

  Seems that you can use only 11 channels

• Tecra A3: Intel 2200bg card compatible with only 11 channels

  As we know Wifi network cards have Channel 13 (European version). Tell me if I'm wrong. I have wifi card Toshiba Tecra A3-184 with 11 chains only (American version). What I would do. I installed the new drivers bu t that nothing has changed.

  Hello

  I found this:

  The European Standard ETS 300328 allows for 13 channels. A card that is able to use all of the 13 channels is a so-called "ETS-map" These cards-ETS can be used in Europe.
  The Canada and the USA, there are only 11 channels authorized use.
  In Japan, there are 13 channels like in Europe.
  In order to use a WiFi card anywhere in the world, a standard of the so-called 'GLOBAL-Card' with 11 channels was created.
  Toshiba WiFi cards are "World-card" class standard, which are allowed for use in the world.

  Note:
  A class of 'World map' WiFi can not be improved to an ETS card with 13 channels.

  This info you can read here on this page:
  http://support.toshiba-tro.de/KB0/FAQ35002P0001R01.htm

• error 1 to queue in a producer/consumer architecture

  Hi all

  I use an architecture-based on producer/consumer queue, as shown in the screenshot below (which is a simplified diagram of what I want to do).

  As you can see:

  1 / in the producer of the loop, I read data from two LV2: map Wafer and HAD current

  2 / in the loop of producer, these LV2 are used as output of a sub - VI, called 'Wafer map change. The Subvi, allows the user to change the 'Wafer map' picture indicator located in the loop of consumption, by double clicking it.

  3 / when the Subvi has run, it displays the picture indicator updated (Wafer card) and the new 'Course DUT' coordinates.

  4 / the two variables are grouped and transformed into a Variant.

  5 / the variant is then enqueud in the queue of the 'hand '.

  6 / this variant is converted from inside the loop of consumption, and photo indicator is unbundled.

  7 / Finally, the map LV2 Wafer is written and the modified photo indicator.

  This type of data flow worked earlier, but now I am facing the following error (it's my french translation):

  Error 1 occurred: Add an element at the end of the queue in GUI.vi of automatic Test Bench

  Possible reasons:

  LabVIEW: An input parameter is not valid. For example, if an entry is a path, it may contain a character that is prohibited by the operating system, as? or @.

  NOR-488: The command requires a PDC GPIB controller.

  I have no idea how it appeared. But now I'm stuck, and I would be grateful if someone can help me with it.

  Thank you.

  Kind regards

  Florian

  Your method to allow the judgment seems suspicious.  Say that there is an error in the loop of consumption.  This stops the loop of consumption and the stop button set to TRUE.  But the value of the stop button will not be read until the next iteration of the loop of producer.  So if you decide to hit the button on the Insert, the queue was already destroyed, then you will get your error.  And all these local variables just shouts "RACE CONDITION" for me.

  Get a mechanical action of the Stop button latch when out.  It is the default setting for a button.  Then place the terminal inside the event (which you already have).  A REAL outside this case, wire OR with wire error to stop the loop of the producer.

  You need to do is create a command to stop the loop of the consumer.  This order will be sent in the case of changing value of stop button.  You should probably send this command after the loop of producer, just in case where the loop of producer created an error.

  You can also use a node property of the button stop to set the Value property (signs).  This will cause the structure of the event to raise.  This will cause the producer loop stop if the consumer has an error.

• How to down load and use OpenStreetMap offline with LabVIEW 2013

  Dear all

  How can I download the OpenStreetMap database and API for LabVIEW call this map offline database!

  Thank you

  Luong.Tran

  Thank you!

• Impossible to replace the video card - Pavilion Elite Pro 410 t

  Hello

  I have a HP Pavilion Elite Pro 410t with an ATI Radeon to 2 GB video card (I think a 5770 or 5570). I'll call this map.

  About 2 weeks ago it started making a noise annoying (sounded like a fan problem).

  I have a spare, older, working NVidia card fanless (calling card B) and I swapped it in using the method indicated in the guide of the user/service.

  When I turn on the Pavilion, it gives 3 beeps and there is no display, so I think that it does not recognize the video card.

  I put the card back in and it works fine, except that the fan sounds bad and I'm not confident, it will last much longer.

  I put the B card in another PC (home built) and it works fine.

  I tried card B in the Pavilion, making sure it was well set and I get always three beeps.

  I even went in the Pavilion BIOS settings to see if there was an option. There is no setting to choose the video card, but there only PCI-E option. Since I'm still just on the PCI-E slot, I left it alone.

  So I have a work card (B), but it won't work in the Pavilion for a reason any. Has anyone seen this?

  If it's a compatibility issue, is there a specific list of cards that works with my system? Do I have to buy the replacement of HP only? HP offers even replacements of video card for sale?

  Thanks in advance for any help.

  Yes, okay.
  If you compare the PSU of the HP and the other PC (home built) - are there differences?
  Maybe you need more powerful or more efficient power supply?

  If you try the other power supply in your HP...?

  C.