Camera application

Similar Questions

• Satellite L650 (PSK1JA-07C017) - Web cam application does not work

  I have a client who owns the computer above and while I was there yesterday, she mentioned that the web cam is not working. I clicked on the icon and received a popup saying to upgrade or complete installation and after doing this the application still not open. I went to the support downloads section and got the enumerated here uninstalled web cam application the application of the computer.

  I re-installed with the application that I had downloaded ut that did not help. The same behavior was exposed. I googled a little and I saw many enties from others so I came here to have this problem, but no solutions.
  Any help would be appreciated.

  Sq

  > A full installation of operating system due to a failure of the application and judging by the results of google search a known issue that should have a fix now.

  This could be a software problem I mean it is possible that the system could be confused to you that it is not impossible? In my short life, I noticed several times this dirty registry may cause issues such as

  > I have installed with the application that I had downloaded ut that didn't help
  Well, maybe you should try to clean the registry using some tools such as CCleaner for example before you install the driver if this is not enough, then I would try to reinstall the image of Toshiba

• Device debugging for the camera application

  Hello

  I would like to perform device debugging for my camera application.

  Problem is that my application seems to work fine on the emulator, but I do not get the desired result on the device.

  But when I try to debug the application I can't access the camera. Whenever I try to access the camera or any other multimedia file I get a warning that I need to first unplug the unit.

  Any suggestions would be very helpful.

  Thank you

  Saket

  Hi, if you want to access a file media, first of all, go to options > memory > mass storage Mode support > power off.

  and now try to debug your application.

  PD: Sorry for my English.

• How to exit the camera application properly

  I start the camera application by doing this

  Invoke.invokeApplication (Invoke.APP_TYPE_CAMERA, new CameraArguments());

  The camera app starts. I take a picture.

  I am on a 9000 "BOLD".

  You use the camera you will find that you can not close the app until you get rid of the image sets that you have just taken.

  For example
  take photo

  Picture is a static view of the screen

  If you press close (close menu) it does ' t go away.

  If you press the ESC key, then press close he disappears.

  now in my application, I need to simulate this but I can't seem to get out

  I want to launch the application.

  Press the trackball to take the picture

  Save the photo.

  Then exit.

  I inject

  EventInjector.invokeEvent (new EventInjector.KeyEvent (EventInjector.KeyEvent.KEY_DOWN, Characters.ESCAPE, 10));

  EventInjector.invokeEvent (new EventInjector.KeyEvent (EventInjector.KeyEvent.KEY_UP, Characters.ESCAPE, 30));

  And it closes ok

  BUT... when I opened the camera (for the second time) the image is on the screen, the last shot.

  So, it didn't really come out. The user must press the ESC key stupid and then take another picture.

  Any ideas?

  Thank you

  You test this in the simulator of BlackBerry or on a real BlackBerry "BOLD"?  What version of BlackBerry device software you are using (beneath Options, about)?  Is that you inject events for all the actions in your list or just the ESC key to exit?

• Re-installing the camera application

  I just got a Windows 8 Surface RT Tablet and I accidentally uninstalled the camera application, so I was wondering how can I re - install? Can you please explain step by step? Thank you!

  Hi Eva,

  To install the camera app, you can follow the steps provided.
   
  a. on the start screen, press Store to open the Windows store.
  b. open the bar and charms on the search bar, type "camera".
  c. press the install button.
  You can also check if the camera application is present in "your apps".
   
  Reference:
   
  Apps in the Windows store
  http://Windows.Microsoft.com/en-in/Windows-8/install-apps-Windows-store#1TC=T1
   
  Here are the answers to some frequently asked questions about the camera application and troubleshooting of the webcam:
   
  Reference:
   
  App photo and webcams: FAQ
  http://Windows.Microsoft.com/en-in/Windows-8/camera-app-FAQ
   
  Hope this information helps. Response with status so that we can help you.

• How to use the camera application

  original title: using the camera application

  According to me, that there is a photo on Metro Screen App.  Is there a documentation or a tutorial on how to use it and what it is for?

  When I click it, I see three small icons in the bottom right...  Camera, Timer and video options.  I don't know what to do with them.

  I see me, looking me in the opposite direction, that seems odd.  I found a folder in my pictures, to my surprise, with pictures of me and two videos! I think that pictures should occur when I click on the screen, but I have no idea how I created a video or how to do it again.

  This looks like a fun app but I need help to use.  I couldn't find anything in the help files.

  Any help would be greatly appreciated.

  MaryLou

  Note: I probably don't not select the category of app so if not, please move this where it needs to go.

  Dena, regardless on the computer because it is an external Kodak camera.  I know how to use the camera itself, but the camera application that appears on the screen of metro is NOT just easy to use.  It shows 3 small icons, one is a timer, the other is for the videos and I forgot what the other one was for.

  In any case, I finally thought to it.  To use the camera, you click on it, then you must click on the screen to start the camera going.   I'm not sure that the timer is for, but again, once you click on the timer icon, you click on the screen to start the timer.

  My camera screen is not screen mode have won 8 metro.  The camera works fine via desktop applications.  I have it working in the version of Win 8 of Skype as well.

  I like to win 8 but it is so lacking in the documentation that it is difficult to learn to use the new ways of doing.

  Thanks for the reply but as I said... has been resolved.

• You will need to change the permissions for the camera application.

  Original title - fresh paint App - settings

  I was testing the waters and accidentally leave refused to use the camera to the computer.   Now, when I click on the camera, it says

  "This application requires permissions to use your camera.

  "You can change this in the settings of the application.

  HOW DO THE APP SETTINGS?   :}

  Hello

  Thanks for posting your query on the Microsoft Community. I understand that you need help to change the permission to use your camera application. I will certainly help you in this matter.

  Method 1:

  Open the camera app, and then follow the steps mentioned below:

  1. Press Windows + C keys on your keyboard to open the bar of charms.
  2. Click the settings option.
  3. Select permissions .
  4. Turn on allow this application to access to your: Webcam and Microphone option.
  5. Close the camera application by pressing Alt + F4.
  6. Take control of the camera application if the application works.

  Method 2:

  If the problem persists please try to troubleshoot the app Windows 8 Apps troubleshooting to diagnose and fix the problem. Please click on link below to run the Troubleshooter:

  http://go.Microsoft.com/fwlink/p/?LinkId=268423

  See also below article for more information:

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

  Thank you.

• Are there plans to add several adjustments of parameters to the camera application?

  Hi, I used Windows 8, Windows 8.1 and the Tech Preview of Windows 10 on a screen multitouch Fujitsu with integrated webcam.  Using the Fujitsu YouCam 3 application, I can get the camera to operate in the right-hand mode only AFTER going in the settings and choosing "FLIP Vertical".  Then he works in Fujitsu's application, but NOT in the camera of Microsoft or any other camera-app app not even when I upgraded to the latest versions of the YouCam App.  The problem is that, although some applications may have horizontal flipping, very few have a vertical flip option. Because if I understand read online (and never a solution to) "How can I get my webcam image to return to the other side, or why is my webcam image upside-down, or how to fix the problem of my image webcam showing upside." I think that Microsoft should solve this problem and provide a PHOTO FIX device for windows 8/8.1 users and make sure to offer a full range of tools in the Technical Preview for Windows 10 camera app.

  Always have a camera that shows upside without parameters to fix it in Skype or other applications.  Camera settings must be available for all areas of the webcam of the person.  The other thing that I see a lot is that while the webcam is working on the side of the desk, the camera is not detected on the side of the metro.  It seems that if a piece of hardware is detected and listed in the Device Manager, it should be available at Metro and office applications to detect and use.

  OnlyMy2Cents

  Hello Martin,

  Thanks for posting your query in Microsoft Community Forum.

  Generally, you receive a disk with the camera software from the manufacturer of the camera that performs all necessary settings applicable for a particular camera model. Manufacturers also come with various other parameters such as the addition through updates they release. If you have already tried the updates, you can check with the manufacturer about the settings that you need.

  With Windows camera application, I suggest to run the troubleshooter app available in the following link and see if that fixes the problem.

  What to do if you have problems with a soft

  See also: help the app photo and webcams

  If you simply need to rotate/flip the image, you can also use Windows Photo Viewer to do.

  Click with the right button on the image > click Open with > Windows Photo Viewer

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  Thank you.

• Why is Sahara PC USB Camera or A4 Tech PC Camera V not recognised in camera application.

  Original title: Sahara USB PC Camera or A4 Tech PC Camera V.

  Why my webcam is not recognized in the camera application

  Hi Carlos,

  Thanks for choosing Microsoft Community!

  You have reached the right forum. Try to solve this problem.

  If I understand correctly, the webcam is not recognized in the camera app.

  Please answer these questions to better understand the issue:

  1. don't be detected cameras in other applications?

  2. are you referring to the applications of the respective camera manufacturer?

  3 they were working before?

  4 you did changes to the computer before the show?

  Response with more information to help you further.

   

  However, you can try the following and see if they help you:

   

  Method 1: Try again with different USB ports and see if that helps.

   

  Method 2: If they are not getting detected in their own applications, I suggest you please contact the manufacturer of the device or the application for extra help provider.

  Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

• Uninstalled Toshiba Web camera application by any chance?

  I use a laptop Toshiba Satellite windows 8, my built in camera has been bad for a while, I fixed it recently and it is broken once again, during the audit, in the Control Panel, he said I need to 'Change' the Toshiba web camera application, I continued and he completely uninstalled the application from my computer I am able to download the app to a legitimate website? If so, how?  Thank you!

  I use a laptop Toshiba Satellite windows 8, my built in camera has been bad for a while, I fixed it recently and it is broken once again, during the audit, in the Control Panel, he said I need to 'Change' the Toshiba web camera application, I continued and he completely uninstalled the application from my computer I am able to download the app to a legitimate website? If so, how?  Thank you!

  Hello

  Your best resource is Toshiba Support.

  You must ask this question on the Forums from the Toshiba Support. Toshiba experts will be able to help.

  Toshiba support - home page:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=product

  You can also post this question on the forums of user Toshiba.

  Toshiba Support Forums:

  http://forums.Toshiba.com/

  Concerning

• video recording on the camera application function does not

  My app windows photo 8 shows the video recording features, however nothing happens when I try to use it. I had no chance in the troubleshooting update and windows updates to fix this problem. How can I get the video camera recording function to work? Currently when I select the video mode, it absolutely nothing happens.

  Hello

  Are you able to take pictures using photo app?

  It seems that there is something wrong with the camera application.

  So, I suggest you follow these methods and check.

  Method 1:

  Run applications troubleshooting

  Download and run the troubleshooter modern UI App.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Method 2:

  I suggest you follow the steps in the article. Here is the link for your reference.

  What to do if you have problems with a soft

  http://Windows.Microsoft.com/en-GB/Windows-8/what-troubleshoot-problems-app

  For reference: app photo and webcams: FAQ

  http://Windows.Microsoft.com/en-in/Windows-8/camera-app-FAQ

  Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• Sorry, the camera application can not be used with this version of windows.

  When I try to open the camera application, I get the message "Sorry. The camera cannot be used with this version of windows. "I'm 8 Enterprice N x 64 Windows. Maybe I need to install my driver, but I don't khow where can I download this. Please help me.

  When I try to open the camera application, I get the message "Sorry. The camera cannot be used with this version of windows. "I'm 8 Enterprice N x 64 Windows. Maybe I need to install my driver, but I don't khow where can I download this. Please help me.

  Hi DunaB

  You must download and install the Media Feature Pack for N and KN of Windows 8 versions.

  This will install all the missing components in the edition of Windows 8 N.

  Click on the following link and follow the instructions.

  Media Feature Pack for N and KN of Windows 8 versions:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30685

  Concerning

• Web camera application error message

  Hello

  I get the following message when I try to run my Satellite L655 laptop webcam application:

  "The application failed to start because its side-by-side configuration is incorrect. See the application event log, or continue the tool command line sxtrace.exe for more details"

  No idea on how to solve this problem, because I was not able to have the menu bar of the web camera (for more than two months now) and I wasn't able to use it on the GMAIL chat since last night (it works well in Skype).

  P.S. I'm not a tech pro!

  Hello Jarnk

  Have you tried to reinstall the webcam app?

  Remove it system (Control Panel > programs and features), restart your computer and install the latest version you can download from the Toshiba support page - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

• Send via the menu of the camera application

  I'm trying to implement a menu item in my application exactly like send it via the menu which is available after you have taken a picture. I tried to look at literature as citing a domestic demand but also to attach a file to send, but they do not really help us.

  Basically, I want to be able to send a jpeg file to my request as an attachment by email, BBM, twitter, etc..

  What is the best way to address the issue? I want the user to be able to modify the body of the message before sending it. Is it possible to have invokeApplication to allow me to do? Can I send the attachment as an argument somehow?

  Thanks in advance

  I was able to create a menu similar to that of the camera app with just a dialog box with the different shipping options.

  With respect to the fixing, I simplified my code, which worked:

  inputStream = getClass().getResourceAsStream("\test.jpg");
  
  byte[] data = IOUtilities.streamToBytes(inputStream);
  
  inputStream.close();
  
  Multipart multipart = new Multipart();
  
  SupportedAttachmentPart attach = new SupportedAttachmentPart(multipart, "image/jpeg", "test.jpg", data);
  multipart.addBodyPart(attach);
  TextBodyPart emailBody = new TextBodyPart(multipart, "This is the body message");
  multipart.addBodyPart(emailBody);
  Message m = new Message();
  m.setSubject("This is the subject");
  m.setContent(multipart);
  Invoke.invokeApplication(Invoke.APP_TYPE_MESSAGES, new MessageArguments(m));
  

  That surround with try and catch MessagingException, IOException and NullPointerException statement. This works with 4.6, and as far as I know and with the file in the res folder of your project.

• Disable the button or to open the camera application

  Is there anyway to disable the feature that allows the camera to open by pressing the button or on the side of my droid?  I have a dashboard mounting that I use to keep my phone while driving, and when I place the phone in, the brackets that hold it in place press this button and open the camera each time.  It's really annoying!  Suggestions?

  There is an application called "Shortcut button" which will give you the results you want.  An once installed open the app and tap "Select application" under the camera on a long button and then select "do nothing".  You can also set to open a different application if you wish, but apparently you want do nothing right.  I hope this helps.