camera raw 5.0 does not work all of a sudden

Similar Questions

• copy - paste does not work all of a sudden

  copy paste does not work all of a sudden. I did system restore has do updates again and it still does not work.

  then I did this thing running and it might fix something and I do not understand what are the new instructions all about - that's why people buy Mac?

  CTRL + c and ctrl + v work?

  Try this

  (1) Start-> Run-> Services.msc

  2) look for Desktop Window Manager Session Manager.

  (3) restart the Service

• Camera Raw 5.7 does not work with Elements 6 MAC

  5.7 RAW does not work on the Elements 6.

  5.6 works very well, putting the plugin in the PLUG-INS/CS3/FILE FORMATS and 6 elements of starting and trying to open a raw file

  Impossible to use the camera raw plugin

  It is not compatible with this version of Photoshop Elements

  I read the 5.7 raw read me and she certainly says it is compatible with MAC Elements 6 someone could confirm?

  See this post by Tom Hogarty.

  Gossweiler beat

  Switzerland

• HP dv6 ENVY: My Envy of HP dv6 wifi does not work all of a sudden

  Hi, I received my laptop 2 years in 2013. He works very well with the occasional wifi disconnects, but above all, it reconnects immediately after. However, earlier I was Surrfing the net, my wifi suddenly disconnected and now it says it is unavailable and does not at all any network show. The wifi icon now displays an 'x' also. Help, please.

  Product name: HP ENVY dv6 Notebook PC
  Product no.: D4B30PA #AB4
  Series No.: [personal information]
  BIOS (Setup): F.22 - 02/11/2012 (A 088, 120000305910000620100)
  Keyboard Review: 52.24
  Total memory: 8.00 GB
  Processor name: Intel Core i7-3630QM CPU @ 2.40 GHz

  Hi @Alzark,

  Welcome to the HP Forums!

  It's a great place to find answers and suggestions!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that your wireless network was working but now it says not available and shows not all networks.

  Have you ran the Windows troubleshooting tool?

  If you check device manager is there any errors on the network map?

  HP Notebook PCs - performing a Hard Reset or forced Reset.  Please be sure to disconnect all external devices and remove any disc from the optical drive.

  Here is a link to HP computers - troubleshooting wireless network and Internet (Windows 8)

  HP Notebook PC - hardware failures (Windows 8) screening.  Under components is a network control.

  Good luck!

• My firefox does not work all of a sudden.

  I use firefox for a year now without any problems and all of a sudden, it doesn't work and I tried everything. I downloaded firefox 4 and it worked, but it's not compatible with my studies online. Does anyone know what I can do? I have a Windows 7.

  You have this problem when running in Firefox SafeMode?
  
  http://support.Mozilla.com/en-us/KB/safe+mode
  
  Do not choose anything at the moment, just use 'continue in safe mode.

  If this is not the case, see this:
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+theme...

• Aspire V3-472PG touch screen does not work all of a sudden

  Hello

  I bought my acer aspire 472PG-V3-761R (with touch screen) a few months before. Recently, I noticed that the touchscreen wasn't all of a sudden. I have already read and tried some troubleshooting tips from the forums and on the internet, but still does not.

  I saw in the forum acer on how to disable the touch screen to see that if it has been disabled, while they inspected the Device Manager - Human Interface devices, there is no touch screen driver compatible HID?

  I've also updated my windows windows 8 to 10 about two weeks after I bought the laptop and the touch screen worked well after the update until this week.

  Please help me to solve the problem and solve it. Was it the update of windows 10? I have a warranty from the store where I bought it, but I still have to inform and bring it to the store.

  Thank you

  There seems to be a driver problem Windows 10, but I've seen a few that have the problem in point 8.1.

  If you have not done so, update the bios here. http://www.Acer.com/AC/en/us/content/drivers

• my Windows Media Player does not work all of a sudden... any ideas?

  When I click on the Windows Media Player icon, nothing happens. When I put a CD to play, nothing happens. I just used it to play music over the two days... what would happen to fail?

  Hi bunkysmom1,

  1. did you of recent changes on the computer?

  2. you receive an error message?

  Method 1

  This problem occurs because the Windows Media Player library database is corrupted.

  To resolve this problem, delete the Windows Media Player database. To do this, follow these steps:

  (a) output Windows Media Player.

  (b) click Start, click run, type %LOCALAPPDATA%\Microsoft\Media Player, and then click OK.

  (c), select all the files in the folder and then click on Delete on the file menu.

  Note You don't have to remove the folders that are in this folder.

  (d) restart Windows Media Player.

  Note  Windows Media Player automatically rebuilds the database.

  Method 2

  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  (a) output Windows Media Player.

  (b) click Start, click run, type %LOCALAPPDATA%\Microsoftand then click OK.

  (c) select the Media Player folder, and then click delete on the file menu.

  (d) restart Windows Media Player.

  Note Windows Media Player automatically rebuilds the database.

  Method 3

  If the previous step fails then I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.

  For more information please visit the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• DVD Player/Recorder does not work all of a sudden.

  DVD a few weeks previously, worked the last time I played a DVD. Now can not access all. Device Mgr gives this comment, "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19). "I tried driver update, but it says I have the latest version of the driver. Guess that something happened with the registry. Someone tell a novice how to fix?

  Hi Numbrod,

  Thanks for posting your question in the Microsoft Community Forums.

  Leave your post, it seems that you have found an error Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

  This can occur when more than one service is defined for a device, if there is a failure at the opening of the service registry entry, or if the driver name cannot be obtained from the service registry entry.

  Let's try the steps in this link and check if it works:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Please return to the State of the issue and also let us know if you have any questions on the issues related to Windows. We will be happy to help you.

• playlist does not work all of a sudden without known reason?

  I placed my playlist with my songs together in a new folder in the folder "music". In the beginning, it has worked. Then I created another folder in the 'Music' folder and Yes, the new songs in the folder and another reading list. After you have disconnected w / computer, both selections do not work.

  It sucks ~ ~ ~ someone could provide me advice? really appreciate it ~ ~ ~

  I learned right - click on a music file or a folder in the folder music of the rocket and create a playlist and it works!

• AirPrint does not work all of a sudden

  Yesterday morning my HP110a stopped working with airprint. iPad and iPhone 4 with iOS 4.3, having worked well before, suddenly can't find the printer on the network. Using Safari, I can access the Web page of the printer of the iPad and the iPhone, my MacBook Pro detects the printer with Hello, ePrinting works fine - but AirPrint stubbornly refuses to work.

  I have been through every troubleshooting - active network, checked all the software / firmware is up to date, same update iOS 4.3.1 without result.

  To print from the iPad is urgent - what can I do?

  To solve this tonite! Changing the protocols of Internet printing setting off on, suddenly the printer can be found via AirPrint. Interesting! Why not make HP it clear that PPI must be on for AirPrint working. I lost several hours trying to resolve this issue.

• My login password for Windows does not work all of a sudden

  I can not connect to my computer. I logged this morning using the same password and a few hours later, I can't. Shift caps lock is not on and I have not forgotten the password. I tried to load it with safe mode and log in to the administrator account, but it is not a. I need help. I don't want to do a complete wipeout.

  I need help. I don't want to do a complete wipeout.

  Here you go:

  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your Windows 7 repair CD.
  3. Press a key when prompted to boot from the DVD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Set up Windows to a point still, things worked.
  8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key. This will save you a lot of trouble.

• my printer does not work all of a sudden wireless. I ran the troubleshooting and I get the message that the CD has a driver problem how to solve this problem?

  How can I fix a cd-rom driver problem?  I got a message when I ran correction problem harware changes may not be detected.  I am still unable to print remotely from my laptop.  All connections are implemented prooerly?

  You follow the procedure described on your site of manufacturers of printer problems

• CS3 does not work all of a sudden on 2 different computers

  PS CS3 Extended suddenly stopped working tonight on my two macs. PS starts up, then an empty white box appears and nothing happens. You have to force quit to quit PS. happens on iMac 24 inch running OS 10.5.8 and a MacBook Air running OS 10.7.2. I reinstalled the software, repaired permissions, nothing changes. I'd appreciate any help. Thank you.

  Disconnect from the internet

  begin to CS3

  When asked check-in never say never

  Reconnect to the internet

• Computer is very slow and IE does not work all the time.

  I bought a computer from my old employeer.  He is doing all sorts of things, or should I say not to do all sorts of things.  It is very slow and IE does not work all the time.  They have questions arise and ask if the administrator oks things and other things like that.  It came with any disks.  I would like to wipe, clean and load a new disc, but I don't know where to find the disc or if I can do it.   Can someone please?

  Hello

  Proceed as follows to contribute to these two questions. You can probably buy the disks of Vista machine to system or get
  the former employer to do it for you if necessary.

  Try these and it can also be a good idea to update your main drivers later. The General corruption can also play a
  role in this issue. And even the TCP/IP stack might need to be refreshed.

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  If no joy there's something blocking perhaps.

  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  --------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------

  Departure - in the search box, type-> order

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack

  --------------------------------

  Maybe need of these:

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• I have iphone5s and my contact id does not work, all the time he show faild Setup touch id please help?

  I have iphone5s and my contact id does not work, all the time he show faild Setup touch id please help?

  Hi yjain51,

  I understand you had some problems recently with getting Touch ID to work reliably on your iPhone 5s. I know that it is a feature of great security for your iPhone, so I'm happy to help you.

  When you use Touch ID, make sure that your hands are free of any dirt or moisture so that fingerprints can be read clearly. This article explains further:

  Use the ID Touch on iPhone and iPad - Apple Support

  Thank you for using communities Support from Apple. See you soon!