can 2 questions on the same blade cause different identifiers?

Similar Questions

• Two questions on the same blade

  Hello

  I'm developing a questionnaire of type on Captivate 4. I have a section where he first asks the user a yes / no question, and then teaches them to type in an explanation if they chose 'yes '. I also need this work so that the two question-answers (Yes/No and the answer text) the spokesperson of the LMS/Email report.

  For example - the first question is ' is it a complementary training you feel you still need? "-which the user must select 'Yes' or «» Then directly below it is written "If Yes, please explain what kind of training you need" - giving the user a text box to type in their answer.

  I know I can do this by adding two 1) Yes/No type question, question of type 2) short answer questions. But the trouble with this is that these two appear on two blades (which is not great for the user).

  Is there a way to get these two questions (or interaction) on the same blade? As always... any advice would be much appreciated

  Hello

  It's possible, if you are ready to use variables and advanced actions where you create the question slide totally. Maybe is easy to imitate the workflow you ask, by duplicating the YES/no slide of short answer Question No response in a text caption (you can add) to a default value. I'll try to explain:

  • You create a true/false question slide and be sure that there is enough space left under the answer
  • You create a short answer question, but reorganize this question and add a text caption. In this TC, you will have the answer that appears when access to this slide.
  • If the answer is Yes, go to the second slide, where you show the Yes. If the answer is no, jump elsewhere

  Even if you still Question two slides, normally the user will not be aware.

  Lilybiri

• Question of curiosity: several versions of LabWindows CVI can be installed on the same PC?

  I'm curious.  Several versions of LabWindows CVI can be installed on the same PC?

  I'm used to LabVIEW, where Yes, it is possible.  However, with CVI, other than the additional support with newer versions, there may not be a problem to return to an earlier version.  I still wonder.  Several versions can coexist in the same PC?  Or they affect each other?

  Curious...

  R

  You can, BUT only one (the last) version of the CVI runtime will be installed - this behavior began with CVI 6 or more.  Before that date, you have completely installed parallel to several versions of the CVI.

  This can be a problem if you ever find that you have applications depend on a particular version of the RTE.  Theory of NI is that this editor is always backward compatible.

  And you might ask what is simply the RTE - the answer is that it is a set of DLLS and stuff that NEITHER really cares to list for you.

  Menchar

• How many computers which can install you programs CC on and how many computers can use programs at the same time? [was: Question for you!]

  When you buy an individual monthly plan for CC at $50 per month, how many computers which can install you programs CC on and how many computers can use programs at the same time?

  Thank you for your answer!

  You can install the software on two computers. These two computers can be Windows, Mac OS, or everyone. If you install on a third computer, you will be asked to turn off this feature on the other two computers. You can then re-enable one of the two previous computers and use Cloud Creative apps on it. You can use apps on a single computer at a time.

  Kind regards

  Hervé Khare

• Group the results of four boxes of text on the same blade

  I'm looking for is a advanced/action variables that can help you:

  Group the results of four boxes of text on the same Blade (this isn't a slide of questionnaire).

  4 correct = reveals a legend of success and lets the user move forward to the next part of the course.

  3 correct entries = reveals a legend of suspicion and gives the user two options - 1) allows the user to move forward 2) directs the user to a section of the examination.

  correct inputs 2 or less = reveals a legend of failure and directs the user to a section of the examination.

  Hello

  Here is the link to the blog:

  http://lilybiri.posterous.com/aggregating-results-TEBS-in-Captivate

  You can literally use the same actions in Captivate 5. You will have a Next button and normal examination (instead of a form button), and maybe you don't need the 'actor', I added. I would like to know if you have any problems or questions.

  Lilybiri

• Use the standard action and action scripts conditional on the same blade upon entry

  I want two different types of action to run on blade scripts enter the same blade, one second apart.

  1 script: fill a variable with the current date.  It is a standard action going right.

  2nd script (run 1 sec after the first script): If the above variable is greater than the current date, follow these steps.  It is a conditional action.

  How can I get Captivate perform these two actions in the same blade?  I can do if 1 script is located on the previous slide and the script 2nd on the second slide.  However this does not look good.  I want these two scripts to run on enter the same blade.  I use CP8.  Any suggestions would be greatly appreciated.

  Thank you

  Sharon

  You can use the two decisions, the first decision designating a standard simulated action by using a condition that always leads to True:

  First decision "always."

  IF 1 is equal to 1

  Assign the v_one with...                         the commands of your standard action

  Second decision «...» »

  IF v_one is equal to cpInfoCurrentDateString your conditional action

  However, in CP8 it is NOT possible to delay of 1 orders dry, this is only possible in CP9. Why you want to defer checking?

• I work in a sensitive project where I have a specific slide which will not move forward. I created a click box that goes to the next slide, and it remains in the same blade if it is in a loop. Very strange. What might be missing?

  I work in a sensitive project where I have a specific slide which will not move forward. I created a click box that goes to the next slide, and it remains in the same blade if it is in a loop. Very strange. What might be missing?

  You can check the Advanced Interaction Panel? You have a note attached to the interactive objects in the simulation? If so, check the desired option Quiz, more specific preferences.

• Is it possible to have TTS for several boxes to click on the same blade?

  Hi all

  Using v.7 and Win 7 here. Have a project where I use the voice of text-to-speech TTS of Paul. So far so good. I need to build an interactive slide with mulitple boxes click so that the learner can evaluate where they run into the status of projects. Is it possible to use the TTS for these mulitple boxes to click on the same blade? I see that you can import audio as a .wav or MP3 file but do not know how generate you TTS and save it separately, then it would be possible to import.

  Thanks for the help

  It's good to hear.

  Please mark this thread as answered.

• Account that a single email can be activated at the same time?

  Hello

  I have two e-mail accounts on the Mail for some time (virginmedia.com and outlook.com). Today, for some reason any Mail keeps asking for the password of the email blank and does not seem to recognize the password (which works fine if I connect on the Virgin account from the internet). Then also the following error message appears "only an e-mail account can be activated at the same time. «The «[email protected] e-mail account activation will disable "... @outlook.com" on this Mas.» How can I solve this?

  Thank you

  10.11.5 OS / iMac (mid-2010)

  You will need at least one of the accounts remove and recreate it in the Internet accounts preferences panel. You can do this without losing all the messages, provided that the account is IMAP or Exchange, and if you store sent messages on the server. Back up all data before making any changes.

• Several networks of power line can exist simultaneously in the same electrical circuit?

  Several networks of power line can exist simultaneously in the same electrical circuit?

  Thank you

  Yes, as long as you change the encryption keys can have simultaneous powerline of the networks.

  If two units with the encryption key "HomeplugAV" does not connect with two other units with the encryption key 'HomeplugAV2', but the two pairs will work independent of each other.

  Hope this helps

• When you use the NI-CAN Transmit sample receive the same Harbor; can a virtual CAN channel (RCA or 257) be used?

  I work for a company that produces and transforms electric parts. We strive to get in remission at nine of the ECU, experiences, Instrument clusters etc. I'm trying to learn how to use LabVIEW to write commands and read the data on the CAN bus. I have downloaded the NI-CAN driver. I am currently 'play' with the same reception Port.VI show in the basic frame of the finder example API folder OR. I am not able to send the number in the data to write the table that it be read by the ncReadNet Mult .vi. When I put the parameter to 'Pending entries reading' the ncGetAttr.vi returns a 0 to indicate that there are no frames to read. As a result, the Mult.vi ncReadNet does not run.

  I don't have any connected equipment, I use the virtual CAN channel CAN256. Is this the reason why I can't get data frames in my queue for the Mult.vi ncReadNet to read?

  When you use the NI-CAN Transmit sample receive the same Harbor; can a virtual CAN channel (RCA or 257) be used?

  CAN carry 256 and 257 are connected to eachother through software.  When you write about 256, you can read the data on 257 and vice versa.  I think the example you mention is a writing and reading on the same port, but what you want is to probably to make a copy of this VI, in order to run two at once, where it opens 256 and the other opens 257.  Then, when you write one that you will see on the other.  I think you might be able to use the test panel CAN too read an and use the example of the other.

• I have pictures in 5 different places, some, some not, how can I get to the same place

  I have pictures in 5 different places, some, some not, how can I get to the same place?

  Thanks for your help, but I'll just give up this. I'm not good on computers, can't do anything anyone advise.  / Thank you once again, Luella

  You learn how to do what all young as you are right now, or the other.  * smile *.

  It's not as if the issue is not going away.  Perhaps if you focused on ONE thing first - like find all the photos on your local computer or to save all photos to your account facebook or yahoo in a folder on your desktop - it seems so overwhelming to you.  All little by little.

  What you want to try first?

• When downloading to the sd card how can I stop downloading the same pictures?

  When you transfer the pictures from my card how can I stop downloading the same pictures again?

  You can delete old photos to the SD card in the device or the computer.  You can also choose the option to select only the images you want.

  Good luck.

• Mr President, how can I enter two rows at the same time with different default values that only the first line to use see?

  Mr President.

  My worm jdev is 12.2.1

  How to enter two rows at the same time with different default values that only the first line to use see?

  Suppose I have a table with four fields as below

  "DEBIT" VARCHAR2(7) , 
    "DRNAME" VARCHAR2(50),
    "CREDIT" VARCHAR2(7) , 
    "CRNAME" VARCHAR2(50),
  

  Now I want that when I click on a button (create an insert) to create the first line with the default values below

  

  So if I click on the button and then validate the second row with different values is also inserted on commit.

  The value of the second row are like the picture below

  

  But the second row should be invisible. It could be achieved by adding vc in the vo.

  The difficult part in my question is therefore, to add the second row with the new default values.

  Because I already added default values in the first row.

  Now how to add second time default values.

  Concerning

  Mr President

  I change the code given by expensive Sameh Nassar and get my results.

  Thanks once again dear Sameh Nassar .

  My code to get my goal is

  First line of code is

      protected void doDML(int operation, TransactionEvent e) {    
  
          if(operation != DML_DELETE)
               {
                   setAmount(getPurqty().multiply(getUnitpurprice()));
               } 
  
          if (operation == DML_INSERT )
                     {
                             System.out.println("I am in Insert with vid= " + getVid());
                         insertSecondRowInDatabase(getVid(),getLineitem(),"6010010","SALES TAX PAYABLE",
                          (getPurqty().multiply(getUnitpurprice()).multiply(getStaxrate())).divide(100));      
  
                         }
  
          if(operation == DML_UPDATE)
                            {                                                    
  
                               System.out.println("I am in Update with vid= " + getVid());
                           updateSecondRowInDatabase(getVid(),
                               (getPurqty().multiply(getUnitpurprice()).multiply(getStaxrate())).divide(100));      
  
                            }                      
  
          super.doDML(operation, e);
      }
      private void insertSecondRowInDatabase(Object value1, Object value2, Object value3, Object value4, Object value5)
                {
                  PreparedStatement stat = null;
                  try
                  {
                    String sql = "Insert into vdet (VID,LINEITEM,DEBIT,DRNAME,AMOUNT) values " +
               "('" + value1 + "','" + value2 + "','" + value3 + "','" + value4 + "','" + value5 + "')";  
  
                    stat = getDBTransaction().createPreparedStatement(sql, 1);
                    stat.executeUpdate();
                  }
                  catch (Exception e)
                  {
                    e.printStackTrace();
                  }
                  finally
                  {
                    try
                    {
                      stat.close();
                    }
                    catch (Exception e)
                    {
                      e.printStackTrace();
                    }
                  }
                }  
  
                private void updateSecondRowInDatabase(Object value1, Object value5)
                {
                  PreparedStatement stat = null;
                  try
                  {
                    String sql = "update vdet set  AMOUNT='"+ value5+"' where VID='" + value1 + "'";                     
  
                    stat = getDBTransaction().createPreparedStatement(sql, 1);  
  
                    stat.executeUpdate();
                  }
                  catch (Exception e)
                  {
                    e.printStackTrace();
                  }
                  finally
                  {
                    try
                    {
                      stat.close();
                    }
                    catch (Exception e)
                    {
                      e.printStackTrace();
                    }
                  }                  
  
                }
  

  Second line code is inside a bean method

      public void addNewPurchaseVoucher(ActionEvent actionEvent) {
          // Add event code here...
  
          BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
                 DCIteratorBinding dciter = (DCIteratorBinding) bindings.get("VoucherView1Iterator");
                 RowSetIterator rsi = dciter.getRowSetIterator();
                 Row lastRow = rsi.last();
                 int lastRowIndex = rsi.getRangeIndexOf(lastRow);
                 Row newRow = rsi.createRow();
                 newRow.setNewRowState(Row.STATUS_NEW);
                 rsi.insertRowAtRangeIndex(lastRowIndex +1, newRow);
                 rsi.setCurrentRow(newRow);
  
                 BindingContainer bindings1 = BindingContext.getCurrent().getCurrentBindingsEntry();
                 DCIteratorBinding dciter1 = (DCIteratorBinding) bindings1.get("VdetView1Iterator");
                 RowSetIterator rsi1 = dciter1.getRowSetIterator();
                 Row lastRow1 = rsi1.last();
                 int lastRowIndex1 = rsi1.getRangeIndexOf(lastRow1);
                 Row newRow1 = rsi1.createRow();
                 newRow1.setNewRowState(Row.STATUS_NEW);
                 rsi1.insertRowAtRangeIndex(lastRowIndex1 +1, newRow1);
                 rsi1.setCurrentRow(newRow1);
      }
  

  And final saveUpdate method is

      public void saveUpdateButton(ActionEvent actionEvent) {
          // Add event code here...
  
          BindingContainer bindingsBC = BindingContext.getCurrent().getCurrentBindingsEntry();      
  
                 OperationBinding commit = bindingsBC.getOperationBinding("Commit");
                 commit.execute(); 
  
          OperationBinding operationBinding = BindingContext.getCurrent().getCurrentBindingsEntry().getOperationBinding("Commit");
          operationBinding.execute();
          DCIteratorBinding iter = (DCIteratorBinding) BindingContext.getCurrent().getCurrentBindingsEntry().get("VdetView1Iterator");// write iterator name from pageDef.
          iter.getViewObject().executeQuery();  
  
      }
  

  Thanks for all the cooperation to obtain the desired results.

  Concerning

• HOW MANY DEVICE CAN BE USED AT THE SAME TIME?

  Hi all

  I would choose the plan of the student to study in September, I would like to understand how much peripheral can be used at the same time? Because I have an IMac at home and also MacBook Pro retina for use at school? Can I download and use it on this two computer at the same time?

  waiting for response and thanks a lot!

  Cloud license allows 2 activations to time http://www.adobe.com/legal/licenses-terms.html

  -pdf of 200 http://www.adobe.com/content/dam/Adobe/en/legal/servicetou/Software_Terms-en_US-20150601_2.

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

  -Two activations on one account CAN NOT be used at the same time (to be noted in the link above of the license)

  -An individual account is for one person and may not be shared with anyone else