Can dreamweaver adds a drop shadow to an image?

Similar Questions

• How to add a drop shadow on this flattened PNG image?

  First timer here-

  When I hide the blue globe Wired where I want the shadow, the Inspector no longer allows me to add the effect.

  Is there a workaround or solution in a different way to select the globe, to make the world its own layer and apply the effect?

  Thank you very much

  Hello Ken, I'm not sure that I can help because I don't know what a 'wired blue globe'.  However, you have described as a flattened .png.

  If you try to add a shadow to a .png of resource file in your Fireworks work?

  NB.  It is unusual to flatten a .png file, because the .png files are used for transparency and flattening out this quality.  I use Fireworks CS4 and a PC, and I've tried both a normal and a flattened .png.  These image files have been imported into the document, on any given page, then their own layer.  In addition, I right click the none flattened .png and was still able to add a drop shadow.

  Make sure that you did your household and know that the asset you are trying to add a drop shadow, is highlighted in the layers panel, and you are on the right page. Also, make sure that the view of the page layout is in iconic Mode [top-right]: which means go all the panels icon and the properties panel is entirely visible.

  For PC, set the value of the assets, choose Properties, click the small arrow next to the + sign, filter located. If this does not work for you. Then give more info on how you created the asset, what operating system you are using and what version of Firefox.  I hope this helps.  Sometimes, all programs Adobe sort of can get stuck.  So just close doc and open again and hopefully, should dissipate the bugs.  Best wishes

  

• Add the drop shadow with css?

  is it possible to add a drop shadow with css? (more precisely to a label component)
  
  
  Thank you!

  No, the shadows are implemented as filters, no styles. They cannot be resolved through CSS in Flex 3.

  Matt Horn
  Flex docs

• How can I add a tag alt of an image in Photoshop CS5 to make web ready?

  How can I add a tag alt of an image in Photoshop CS5 to make web ready?  My web developer wants I to send him all my images with an assigned alt tag so that it allows to automate the ADA Web site accessibility. I know when I chose "Save for Web & Devices", I have the possibility of how metadata I want to include at the levels of: None, right copyright, Copyright and Contact info, everything except the camera Info, all.  I don't want the public to be able to view all the metadata, because a lot of it is sensitive to the administrative notes.  Any ideas?

  Alt tags have nothing to do with metadata. They are what the name suggests - additional HTML code. Your timer will insert, you can simply provide the text to use.

  Mylenium

• How can I add titles and ALT text to Images that are used as fill?

  I built a site and in most cases, all images are fillings.  I want to update the title and the replacement text, but do not have the option.  It seems that I can only do this to images that have been placed?  If this is the case - how to place an image on an area I want to be filled.

  Thank you

  The work around you are use is probably the best solution because there is no way to add the alt text of an image placed in a frame.

• drop shadow effects my images...?

  Hello

  When I edit a brochure for printing placed images

  and I apply shadow it brightens images! can I bring shade without images?

  Thank you!

  Try changing the merger of transparency in RGB space.

• Can I add a drop-down list for the bookmarks toolbar?

  I would like to have a series of categories of bookmarks in the bookmarks toolbar. Let's say a button called "Household" could have a menu drop down menu links to my sites popular for "Home repair," 'Kitchen', 'Furniture finish', etc.

  And maybe another button may be labeled "Science" and its menu drop-down can contain links to 'Environment', 'Medicine', 'Space', 'Geology', etc.

  And to be really good, each subcategory could have subcategories beneath them.

  Create nested folders (folders in folders) on the bookmarks toolbar. You can also do the same thing in the Menu bookmark instead of bookmarks toolbar.

  1. Right-click on the bookmarks toolbar and choose 'new folder '; Name this folder cleaning
  2. Right-click on the case in the toolbar bookmarks for each subfolder you want under household and choose "new folder"; Name these folders (i.e., home repair, kitchen, furniture, etc.)
  3. Drag or create bookmarks in each of these appropriate subfolders to the name of the subfolder.

  Repeat the above for another folder/sub-sub-sub-folders (i.e., Science folder under folders, geology, environment, medicine, space, etc.).

  See-

  • Records - https://support.mozilla.org/en-US/kb/bookmark-folders-organize-your-bookmarks
  • Bookmarks - https://support.mozilla.org/en-US/kb/use-bookmarks-to-save-and-organize-websites

• How can I add my info to all the images that I edit?

  I'd like add my details to the description section of the metadata on all the hundreds of images I retouch, can anyone suggest a Mac application that can easily and quickly batch this task to the image files that choose?

  Reason: Sometimes, I work in a team and I'm not 100% sure that the editing was made by me, I'd like to add my info to the metadata.

  Im running photographers Photoshop CC last pack with lightroom on an iMac i7 with the last OSX10.9

  Thank you

  Model metadata in Adobe Bridge.  Lightroom may also be able to do it too.  I do not use LR so I do not know what to do but is seems logical that LR must be able to change metadata.

• How can I add a white line in my image?

  I got this model I created:

  And I would add a white line linking like this:

  Matthew,

  Of the image, it looks more like a white fill behind.

  Whatever it is, if I (put) understand it, you can:

  (1) (copy all works of art

  (2) select all copies and Pathfinder > unite;

  (3) object > path > offset from the desired width gap/external.

  You can remove the United way.

• How can I add a last tweet on this image box?

  Hi, I tried to superimpose a last tweet on this picture box but I'm having no luck could you please help me?

  willlh.com *.

  This is the site and the tweet box is on the left below the blue twitter logo.

  Any help appreciated,

  Thank you

  WillH

  It is a composition of design.  It is NOT a web page layout.

  http://willlh.com/website%20Design/home%20page%20Website%20Design.jpg

  You have a lot more work to be done before you can use it for a website.   Work through the tutorial in 3 following parts.   Although written for Fireworks, the procedure is basically the same, no matter how graphic soft that you use.

  Taking a Fireworks comp to a setting shaped CSS in DW

  Part 1 - initial design

  http://www.Adobe.com/devnet/Dreamweaver/articles/dw_fw_css_pt1.html

  Part 2 - markup preparation

  http://www.Adobe.com/devnet/Dreamweaver/articles/dw_fw_css_pt2.html

  Part 3: layout and CSS

  http://www.Adobe.com/devnet/Dreamweaver/articles/dw_fw_css_pt3.html

  By the way, do not use spaces or special characters in the file or the names of files for the web.  This will create problems for you later.  If you wish, you can use characters to underscores _ or hyphens between the words.  But no spaces.

  Nancy O.

• How can I add a clickable link to an image in the slideshow.

  Excuse me is this has already answered, I searched the Forum but have not found specific responses.

  Like many designs, I have a slideshow of 4 images that loop on my front page. Each of them is an advertisement. As they pop up, I would like to allow the user to click on a photo and be directed to the corresponding page.

  How can sounds very reasonable, I achieve this?

  Thanks for any help.

  Hello

  You can select the Image of hero and then in the top control bar apply the hyperlink.

  - http://project02.businesscatalyst.com/Jing/2012-08-28_0047.swf

  Let me know if you need additional information.

  Kind regards

  Abhishek Maurya

• How can I add drop shadow to a car that changes direction?

  Hello

  Flash CS5

  Is it possible to add the drop shadow to plan views of vehicles (vehicles are like MovieClips png images) such as as vehicles change along the roads (also the png images) the shadow is still projected to the North West ot the vehicle? Buildings in the basic png image have shadows but vehicles must also to be part of the scene and seems wrong.

  How do we?

  Is there a control over the opacity and smoothness?

  If I have views of the plan of humans walking shadows would follow the movements of leg?

  Envirographics

  You are welcome.

  p.s. Please check the useful/correct, if there is.

• Question about the size of the drops shadow

  Hi all!

  I created a style that contains only a custom shadow. I frequently use this style of illustrations that I am creating a book.

  However, since the update to 2014 CC, I had a problem with the style. The size of the shadow is different on each illustration that I apply it. I initially created the style to have a px size 7, but now, when it is applied, the size is sometimes 22 px, sometimes 30 px, sometimes 5 px.

  Can someone tell me what is happening and how I can get the size drops shadow remains constant whenever I apply it?

  Thanks in advance!

  In my opinion, than if you create a predefined layer style Adobe store the resolution of the document that you were editing when you created the preset in the preset this Photoshop which allows the effect of style to the resolution of the document to which you apply the style layer presets.

  Layer style setting as you are in absolute terms in pixels.  That means the size of the shadow would would vary on document with different resolutions, notice in the layers of the menu it is layer > layer Style > effects of scale... and dialog (s) in the size of the Image there is a scale Styles box or a balance setting Styles...

  If it works differently in version CC 15 is then was CC version 14, they can be a new bug.

  If you want a shadow of 7px regardless of the resolution of documents that you can be able to save an action that add a PX 7 shadow using the layer Style dialog box does not use a predefined style.

  I created a Drop Shadow preset on a 300 DPI Document distance 2 px size 7px.  Then, I recorded an action the applied than preset and then applies the same settings using the style layer instead of the preset dialog box.  There is a big difference on the way in which the two steps were recorded.

  When I walk through the action on a 300 DPI paper shadows looks the same.  On a 72 dpi document that the shadow of a Preset seems small as 300 DPI document however the step which was recorded with the shadow layer Layer Style dialog box looking for him much more leap has been reduced to match the resolution of 72 dpi for documents.

  So it look like if you use a style of layer preset in style palette, the effect will be to change the resolution DPI of documents.  Notice in the action there is a layer Style scale 100% in step recorded using dialogue layer style.   Where the pre-defined DS is applied some how by Photoshop and Photoshop will scale the effect...

  

• drop shadow cut internal bevel

  I added an internal bevel, but then when I add a drop shadow, it takes the right side at the bottom of the box (rather than add himself to it), eliminating the side bottom right of the bevel. Nothing I've tried except disabling shadow gives the cutting bevel inside the box. How can I fix it?

  Have you tried to change the stacking order of the filters direct?

  If so, convert the object to a symbol first, the bevel already applied, and then apply the shadow to the instance on the canvas.

  Jim Babbage

• There is no drop shadow option to Stylize menu

  Yesterday, I downloaded Illustrator CC 2015. I need to make a drop shadow on a text layer. I see in your forums it says to do in fact > esthetics > shadow except I have NO Drop Shadow option in the aesthetic. The only option I have is fluorescent contours (see screenshot: https://www.dropbox.com/s/k901givwsb72go7/Screenshot%202015-08-18%2010.43.24.png?dl=0 ( )

  How can I get the Drop Shadow option?

  Just answered my own question. It is an another "aesthetic" point on the "Effect" menu above it that I capture screen, and this first 'aesthetic' has the shadow!