Can Flash for html5 canvas - I contact of the canvas to the parent page?

Similar Questions

• How to play videos flash for 40 seconds and then display the Web page automatically?

  That was my question:

  I made a Web page, I want to show a video flash for 40 seconds when the page is opened. Then the Flash video should disappear and opens the web page. How should I do this?

  This was the response:

  Hello

  This would require the use of actionscript inside flash video, which would then redirect to the main website after the deadline runs out.

  (for how to do this you would be better advised in the flash forum -http://forums.adobe.com/community/flash/flash_general).

  Please help me on how to add actionscript code

  If you the only goal is to pass on this page to the index page after 40 seconds, then you can do it in the code of a web page, rather than edit the Flash file.  Just add the following code in the head section of the web page of the video...

• Flash for html5 canvas - how to target instances "cloned".

  I have a Penguin object that I duplicate several times throughout a quiz of canvas, html5, with code like this (Simplified):

  function newPenguin() {}

  var clonedBlock = new lib.peng ();

  root.addChild (clonedBlock);

  clonedBlock.x = 100;

  clonedBlock.y = 100;

  clonedBlock.name = "Penguin" + count;

  slideAbout (clonedBlock);

  }

  Whenever a new issue is reached a new Penguin is added to the screen and the 'slideAbout' function it allows to drag around independently on the screen. So at the time wherever you get to q10 there are ten penguns all independently sliding on the ice. Everything works well.

  What I want is, if a question is answered correctly, all these penguins jump up and down both on occasion.

  I can do the jumping animation, but I can not understand, the main script, how target these dynamically added penguins.

  If I had added them manually, I could just have targeted the with the name that you add in the Panel of the label, one as the name for AS3 "instance".

  But when they are added using the "new"lib"above method I can't find a way to get them to hold them. The "name you can add with '.name' doesn't seem to work as the 'instance' name - I just get a js error if I try to use it."

  I hope someone can help me - thanks in advance!

  There are a few methods to achieve this.  It would be to add the penguins to a parent who has children of Penguin and another would be to use an array to store the references of Penguin.

  the last submission:

  this.penguinA = [];

  function newPenguin() {}

  var clonedBlock = new lib.peng ();

  this.penguinA.push (clonedBlock);

  root.addChild (clonedBlock);

  clonedBlock.x = 100;

  clonedBlock.y = 100;

  clonedBlock.name = "Penguin" + count;

  slideAbout (clonedBlock);

  }

  so you want to reference your penguins, loop in your table

  function jumpF() {}

  for (var i = 0; i)<>

  do whateve with this.penguinA [i];

  }

  }

• Bug. Can not put two edge animations animate on the same page

  Alrighty. Just thanked Adobe for fixation sensitive question scaling. Now, it seems to be a new. When I put two animations dashboard run on the same page, they both disappear completely from the view! Both in mode live view (or which saw fluid grid) and trying to get a glimpse into any browser. The responsive design works fine but if I put two animations on the same page that the two just disappear! GONE!

  Perhaps there is a code that I can use to prevent this. I did a number of tests during the last hour. My smile (from the reactive solution) is now again a frown. I can't keep working like that. Please let me know if there is something I am doing wrong. I have two animations on a page without worries prior to this version, but the delicate design did not work properly. The responsive design work NOW, but I can't have MORE than ONE ANIMATION on the same page. Thanks for your time. Best regards, Julian.

  The use, I did the modification required:

• How can I make my view on my screen the entire page instead of just a part of the page

  How can I make my view on my screen the entire page instead of just a part of the page

  Hello

  This Microsoft Information should help you with your problem:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  See you soon.

• How can I add a "clickTAG" and the loop 3 times to a banner made with flash cc2014 html5 canvas?

  I made a banner using flashcc2014 using the html5 canvas. I don't know how to do 3 times using javascript or by adding the normal "clickTAG" banners need to loop.

  Any help appreciated.

  Thank you

  Rodrigo

  the necessary js is the same as, except that you do not type the variables and that precede you them "this."

  last image in loop:

  {if(!this.alreadyExecuted)}

  this.alreadyExecuted = true;

  this.loopNum = 1;

  } else {}

  this.loopNum ++;

  {if(this.loopNum==3)}

  This.Stop ();

  }

  }

• Converted file from Flash to HTML5 Canvas does not publish

  Hello

  • I use a Mac.

  • I have an existing Flash file, operation which publishes fine.

  • Convert to HTML5 Canvas using the command-> convert to other Document Formats-> HTML5 Canvas

  • Do not make any changes to the settings of the HTML5 Canvas publication

  • Select "publish."

  ... The .html file displays only a blank white block, the size of the Flash file.

  I tried:

  • Create a new HTML5 Canvas file and paste the existing content in this

  • Copy the script action layers of the original in the Web a Flash file

  • Check the settings of publication for something unusual

  Any help is appreciated.

  Looks like the JSON file which poses problem. You can disable the spritesheet option in settings of publication, and then your multiple bitmap files can operate locally as well.

  Regarding Javascript errors, those that are produced inside the code CreateJS, you wouldn't want to be messing around with it! They are only security errors, or the consequence of something that does not not due to security restrictions. You will not get the errors when files are online, or if you can disable the sprite sheets, I suspect.

• I desperately need a preloader to my cover page of Flash and HTML5 Canvas

  I tried to advertise on odesk. I contacted the web professionals. Nobody seems to know how to make a preloader to HTML5 canvas!

  I put hours of work into this HTML5 canvas: http://erikaviktor.com/ , but it takes a while to load. Several seconds. I really need a preloader on the site but I can't figure out how. I'm totally out of my depth. I don't know what to do. I'm desperate. Even a false preloader would agree. As long as he didn't sit on the page while him remains loaded.

  Can anyone help? Point me in the right direction? I'm now 10 hours on this problem. I just need to revive in Edgeanimate? I think they prechargeurs HTML5? But who would end of work week, I did not.

  If I seem a bit desperate, it's because I am!

  Adobe: why it is not built into Flash?

  I found an old thread that describes a way to implement a loading progress bar.

  [CC HTML5/Flash] Preloader?

• Drag and Drop for HTML5 Canvas

  Why can I use the drag and drop snippets for ActionScript 3.0 document, but when I try to do for a HTML5 canvas document that is not yet show the object instance in the browser?

  At the risk of pointing out the obvious: because the HTML5 documents do not work with ActionScript.

• Flash CC HTML5 Canvas Preload

  Have created a HTML 5.0 Canvas web site using flash.

  http://www.quizzine.ca

  I have to add a preloader because there are a lot of graphics and this can take some time to load, and a white screen confuses people.

  What is the best way to do it?

  I tried to create a pre-loader with edge animate but it seems that to preload javascript images not.

  Any help with this would be much appreciated.

  Tim

  Here's how I solved it.

  In the head of the html page, I changed the following function:

  function handleComplete() {}

  Remove, preload animation element

  element var = document.getElementById ("preloaderID");

  element.parentNode.removeChild (element);

  }

  In the body, I added the following code to place the image pre-loading.

  

  This way, the PreLoader.gif animation plays for the javascript and loading of multimedia elements.

  When everything is loaded handleComplete fires and the "preloaderID" element is deleted from the page.

  I hope this works for all of you who find what I'm looking for this answer for about 4 weeks.

  See you soon

• Please provide countdown in CC Flash for HTML5

  Please provide countdown code in Adobe Flash CC for HTML5

  Use the Ticker class.  for example, it will be the countdown to ms:

  var tl = this;

  countdownF (3000);

  function countdownF (ms) {}

  {TL.f = Function (e)}

  If (createjs. Ticker.getTime)<>

  Console.log (ms-createjs. Ticker.getTime ());

  } else {}

  createjs. Ticker.removeEventListener ('ticker', tl.f);

  }

  createjs. Ticker.addEventListener ('ticker', tl.f);

  }

• Can I use HTML5 and XHTML Transitional on the same Web site?

  HI -.

  I inherited a website here where some pages are valid html5 and some transitional xhtml.  It of OK to leave them like that, or should they all be a doctype.  I use a lot of ugly anomalies on IE9 and I wonder if multiple doctypes are originally the.

  TIA your entry.

  JL

  1. Display through my Virtual Box IE9 I don't get any problems with your videos - everything works fine. If I turn ON compatibility mode, I get an error Flash but the fancybox works as it should. What do you see when you click on one of the video links?
  2. I do not see it and even, I turned on the mode of compatibility etc. Normally, this occurs when a script has not loaded in time. You have a LOT of scripts throughout this site and are placed in page - some top, somehow, a few down. You also have the _js/jquery.js mentioned twice, even though it is in the comments. Try to remove that.
  3. I can't reproduce this issue either, but it uses Flash and scripts are quite heavy. Your nancy.swf is over 300 KB and jquery UI in the 160kb page. Using the HTML5 DOCTYPE, I would advise against using any Flash as the iDevices can not see this.

  As a general rule, pages could do with a lot of storage and compatible css/scripts/DOCTYPES on each page. All CSS should be at the top of the page. All JS usually down but in order - jquery, and jquery ui first and the rest follow. Your direct script actions must always be changed on the page ($(".fancybox").fancybox () etc.), but before the end

  Also, try to delete the comments of your compatibility meta tag:

• Beginner Flash... Insert SWF into the web page and create the 'play' button

  I try inserting and SWF in my Web page.  I have 3 problems, 1. I'm new to Flash and are not at all good at it yet. 2. how to say stop at the end of the sequence and insert a new button "play"?  3. what should I do to put on my Web page.

  I know that these aren't the answers Yes or no, if I appreciate even to pronounce on the best way to learn Flash for me.

  2. it can depend, but ENCs, you are probably using the timeline, very probably, that you just need to put a stop(); command in the last image to stop at the end.

  To play again, your power button code must understand something like: gotoAndPlay (1);

  How the button code is depends on which version of Actionscript using your file.

  3. When you publish your swf file, I also Flash publish an html file (configure you publishing settings).  You can then take this html file and copy the embed code that it contains your page file html web.  You will have to perhaps include a javascript file, as well to make it work, and you can say that looking at the head of the HTML code Flash created... that code head must also go to your page file web html and the javascript file must be placed according to how your html code targets there.

  You might do better just to get the html page that Flash creates working first for you.  He could find how to move into your web page more easy.

  My opinion: the best way to learn Flash for yourself is to simply dig in and keep him home.  You will lose hair, sleep and your mind as you will, but eventually, you get used to that or you defeat.

• How can I change a URL to include the parent page?

  How can I change the URL to include the parent Muse page?

  for example my URL is www.splinterd.com/kauri.html and I need to be www.splinterd.com/store/kauri.html

  I have the page of kauri sitting under store (such as a child page) Muse page.

  I have an online marketing person asking it is set like this to help with google rankings / SEO.

  Thank you!

  Hello mariac,.

  This can actually be set up by your FTP host.

  Please go to them like asking the necessary changes to the file system of your web site.

  Thank you

  Ankush

• Can download and install, but do not load the entire page with the exception of mozilla.

  When I download and run the installation, everything seems to go well until the load of firefox. The only page that is displayed is the page of Mozilla. When I try to go to other sites, there's a problem loading page error. It would be on a Windows 7 system.

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and allow your firewall to ask permission to get access full and unrestricted, again to install for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/fix-problems-connecting-websites-after-updating