Can I do a waveform graph view more samples currently read?

Similar Questions

• Save the Studio measure waveform graph as a file for reading later

  Hello

  I would like to know if there is an easier way to record data are rendered on a waveform graph (configured as a graphic of the band) to capture incoming data in the code and send copies of it to a file. It would be nice if there was a method to do this, with all relevant metadata stored in the file (color, etc.). Better yet, the file could then be opened in a labview application (for example, a TDMS file) for later review.

  Thank you.

  PS. I use VS2010 and MS 2010.

  So, it looks like you already have all the data points. For metadata that you mentioned, line color, plot colors, point colors, line styles, etc. are all accessible from the properties so if you wish, you can retrieve all that data.

  I think that upon return from t0 is the same compensation history, you can use the ClearData() method.

• XY graph view more than 3 data sets

  I try to use XY graph to display a cluster with a timestamp and more than 3 sets of data - it works very well with 1 or 2 sets of data, but not more than 3. What could be the problem?

  Try this

• How to display more than two waveforms on a waveform graph?

  Well, I have a question in the basics of waveform graphs. I have to post four waveforms simultaneously in my program. I can see two graphs on it, but when I try to display four waveforms, I get an error:

  You have two or more data types of cluster wired together, but clusters have different types or numbers of items.
  Cluster (unnamed), a group of 3 elements.
  conflicts with graphic waveform cluster, a cluster of 2 elements.

  Is there anyway that I can change a graphic in waveform to a cluster of 4 elements? Because I borrowed this waveform of a VI example on waveform cards "Charts.vi", so I guess it must have been programmed to be a cluster of 2 elements.

  I hope that I have my question clearly.

  Thanks in advance

  One of the problems that you have is that data from the DAQ assistant has a time stamp from now which is about 3 billion seconds

  Data from the simulated signals has a time stamp based on the beginning of the acquisition which is about 0 seconds.

  So, the table needs to be stretched early in LabVIEW time now to show all the data.

  Change signals simulated so that the timestamp is the result of an absolute time, then you should be able to see all the signals.

• How can I view more than 150 emails in Mail on iPhone with iOS 10 7?

  Since the upgrade to iOS 10.0.1, I can no longer view more than 150 e-mail messages in a folder.  This happens with IMAP accounts as well as my iCloud email account.  Before iOS 10, with accounts IMAP, when you sailed until the end of the list of messages, the phone would then charge a 150 additional messages from the server.  With iOS 10, this happens.  Thus, on e-mail accounts that I have on the phone who do not receive a lot of messages through the day, I post only 1-2 days of e-mail messages.  The same behavior is experienced on iPhone 7, 6 s iPhone and iPad Mini 3 - all iOS 10.0.1 running.

  Hi there RickNY,

  Welcome to the communities of Apple Support!  I am happy to help you with your iOS devices does not not more than 150 messages after updating to iOS 10.  I know how it is important to be able to access old emails.

  I would like to begin by consulting a setting in Mail.

  1. Go to the settings app
  2. go to mail > THREADING
  3. Make sure you have organize by live wire (green)

  Please check your Mail application and see if you are now able to load older messages.

  Best wishes!

• How can I display only a part of the scale in the waveform graph

  This is the first time I try to use the waveform graph, since now, I used the table of waveform.
  The reason why I moved to the chart, it's that I need cursors.

  I have 2 problem

  the first: in the diagram, the graph moves when I add a new data and the scale of the x-axis stay the same size, in the right size I always saw the new data. How can I do that with waveform graph?

  Second: How do I say Labview to the day I click on the graph, I need that because when move graphic I lose the day, and to make I need to zoom out, I drag the imprecateurs.

  All this must be done programmatically. The LabVIEW graphic accepts tabular data, not only as the table and the graph doesn't have the ability to retain the previous points, like the story of a graph. You will need to retain previous values and then continually update the graph with the old and new values to get a shift register "chart as behavior. Cursors should be written programmatically re of each iteration, since you rewrite the entire graph.

• How can I view more than one document at a time?

  I had an upgrade for some reason yesterday, and now I can see only one document at a time? I need to be able to view more than one side by side?

  With the new updates, Acrobat Reader uses default interface with tabs (like most browsers).

  To view two documents side by side in different windows (rather than the different tabs), just drag a tab out of the window of the player and it should become a new window!

  If you want to permanently disable the interface to tabs, you can uncheck "Open documents as new tabs in the same window" in the General preferences (go to Edition |) Preferences).

• How can I trace data to a table 2d one at a time on the same waveform graph

  Hello. everyone. I have two readings of the sensor build in a 2d array. I would draw as bar on the same waveform each time that each sensor reading is display as a bar on the graph.the problem is that I don't really know how to access each given at the time and sent each sensor reading on the 2d of waveform.the table is actually a two monofores rwo/100 100 representative reading of each sensor every 1 sec.

  
  

• Multiple waveform graphs do not simultaneously view data

  Hello

  I use a box USB-6009 to acquire three analog input voltage signals simultaneously. I want two plot the voltage wrt time signals, while the third signal, I want to extract the frequency and then draw the wrt time frequency. I want the three of us graphic waveform having a category axis in units of seconds from zero seconds. My diagram of block VI is below:

  

  When I run the VI, I get some problems. First, the frequency table is not plotted all the data, and although I am happy, time begins and reset it's count in tenths of seconds rather than in seconds.

  With the voltage 1 and 2 maps, the voltage is read correctly, but the x axis are in terms of date and instead of seconds. The front of the VI is below:

  

  I tried to run the VI with only the third signal voltage being played and the table of wave shape of the plots the frequency perfectly. The Panel diagram and the block before lower is to:

  

  Could someone tell what I'm doing wrong in the first VI?

  1. you must use the version of waveform table Mutiple multi-channel DAQmx Read Points.  Then, you don't have to accumulate the waveforms yourself.

  2 tables index is 0-based.  Thus, the filrst of the table element is actually 0, not 1.

• How to display the signal on a waveform graph in Labview Signal Express?

  Hello

  I want to display a signal in Signal Express 3.0 in a "waveform table", but don't know how to do it and I think that it may be impossible?

  In Labview, there are two ways to view data, a 'waveform table' or a 'waveform graph. The great thing with 'picture of waveform' is that it allows you to set a length of history and you can see the data move to the left (option graphic strip) that samples are recovered. It works perfectly.

  In Signal Express I can only select "Graph XY" or "Waveform curve" by doing a right-click of the mouse, but I can't select "table of waveform. Is it really true that it is not possible to view data in a graph of waveform "with Labview? (1 analog signal during streaming, 100 samples to read at the rate of 1 K)

  Thank you in advance,

  Enrique

  Hi Enrique.

  You are right that there is currently no graphic waveform in SignalExpress. The thing nearest you can join, is saved data under a log and then he looks one when recording (which I know this isn't quite the same interactive behavior).

  For your last comment, you wrote 'waveform curve', but I guess you meant 'picture' here as well.

  Sorry about that. We recently received this request, then perhaps in a future version.

  Phil

• rotation of waveform graphs

  Is there anyway to rotate a waveform graph, so that I can view them vertically? (the wave moves vertically, rather than left to right)

  You vote for this idea on the exchange of ideas, swap axis allow for graphics signals and diagrams intensity (and possibly others)

• Two background colors for the same waveform graph

  Hello guys!

  I have a question for you: I am a new user of labview, so please be nice!

  So here's the deal: I just created a thanks 4 thermocouple temperature registration program.

  In real time, I then have a waveform graph 4 curves as soon as I start my program. And in my program, I had a button that allows me to record the temperature in a file for a period of time at a certain frequency.

  So, what I have is: I got my chart of waveform with a black background for example, and once I pressed the button, the background color will be changed automatically to highlight the part of the graph where the record occurs, then the background will return to the black after finished recording. In this way, on the same graph, I could say that registration took place from here to there by looking at the graph. I have two different background on the same graph.

  I don't know how to change the background of a chart using the property node, but is it possible to do what I want?

  I hope I'm clear. Otherwise, feel free to ask me for more details... I might post my vi if necessary

  See you soon

  Well, I know this is not exactly what you want to do, but you can try the following.

  Change the color of the line on the chart when recording occurs.

  You could therefore have a red line, then press on save, then it turns blue, then back to red.

  And when that is confusing since you have 4 different lines on the chart 1,

  You can change to a red line and a dotted red line, for example.

  Would that be acceptable? If so, I can show you how to do this.

• Multiple waveform graph, history of waveform card

  Hello to all my colleagues.

  I have problem with software of my purchase. I create software for the acquisition of 40 signals. I need to view and save these signals. I measure these signals with different frequencies (this depends on the user's selection), but the lowest frequency is 500 Hz and the highest is 2 000 Hz. Because I see a different size of X scale (5 sec - 60 dry), I decimate these signals for display and display only 100 samples per second.

  I think that my problem is related to a very long history of waveform graph. When I display all signals in a single diagram, permanently signals are not displayed and the table is larger than the correct size of X-scale, means that the courses of the waveform graph freeze. I think the problem is connected only with display and no acquisition because I tried to check the measured data and there isn't any problem.

  You have one any opinion how can I solve my problem?

  Please, help me, because I'm out of ideas.

  Thak you.

  Here's my VI.

  Double post,

  Please find the thread here:

  http://forums.NI.com/T5/LabVIEW/multiple-waveform-chart-history-of-waveform-charts/m-p/1762160

  Best regards:

  Tamas Szekely

  Technical sales engineer

• Newbie - waveform graph axis graduation issue

  Hi all

  I'm new to studio of measure (v8.0 with .net c# 2005) sorry if this question has been answered 10 times more, please feel free to point me to a previous thread.

  I have a request to:

  drive voltage analog sampling at 10 Hz reading 1 sample per tick.

  standard waveform graph axis X and Y and a plot as a collection of doubles.

  So far, it's something pretty simple and I can get all this work in the code example.

  My problem is that I want for my X axis to read between 0 and 1800 with the major divisions of 100 and minor divisions = 50. I would like for my actual graph however contain 10-point increments, so that would mean that there will be 500 points between each minor division.

  I looked down through the properties of the axis and I can't enough find the properties that I need to set.

  Can someone help me please.

  Thanks in advance.

  Steve

  Hi Jamie.

  Thanks for the reply. I spent all the update yesterday my system of measurement studio 2012 + Dev Studio 2010.

  I put these settings, looking more closely at my data, I have a problem with my data acquisition analog voltage so I'll search through my solution and start a new thread, as I'm getting 3 times more data that I need, so it is causing my chart to be wrong.

  Thanks again.

  Steve

• Waveform graph lose history

  Hello to you all, useful forum fans!  :-)

  I implements an array of tape showing the values of several parameters in real time, using a waveform graph, but during the race he keeps resetting of the history of the card at irregular intervals.  Unfortunately, because it is for my work, I can't post the code.  I'll do my best to describe the problem and the installation program, however.

  I have a data acquisition loop to read the values in real-time in a table of the floats and stores it in a global variable functional memory data buffer that contains a table 2D of floats, a 'page' of floats by time interval.  This forum works at 50 Hz through the expectation of millisecond Schedule VI.

  I then a chart update the loop running at 10 Hz via forward schedule VI.  This loop reads the data of all samples buffer VI he has accumulated (usually 5, but sometimes 4 or 6) and converts it to an array of waveforms through the VI of waveform build by taking each column of data and by assigning to it, definition dt to 0.02 (50 Hz), and parameter t0 to time less dt current multiplied by the number of samples in the table.  The terminal waveform graph is then set to this table of waveforms.

  Most of the time that it works well, with the new values added the previous values to create a smooth graph of multiple plots with the correct values are displayed.  However, sporadically the chart Flash empty and begin to fill again from scratch.  I can tell is just jump in time (the axis of abscissa) because I can move the axis scroll bar and there is no other data to scroll.

  I in addition to these two loop loops a GUI-structure of the event and a task of State machine loop.  However, I have excluded these two loops ownership history of the graph through inspection and breakpoints.  This is why I can only think that there are conditions or the type of data which, once introduced in terminal results of the graph by adding DO NOT present data as usual.  Empty array is not the answer; I tested with a separate simple test VI, and therefore in the chart, keeping the currently displayed data but do not update new data.

  I would appreciate any idea what any of you have as to the possible causes of this behavior.  I apologize again for not being able to view the actual code, although I can work to establish a similar setup with the data buffer, etc. in a separate VI and after that.  Also, I would like to know if you want me to describe the other logic, settings, or the circumstances for you.

  Thank you very much for your help!

  -Joe

  Whenever I've seen this problem when you use a waveform he chart endded up being a problem with;

  (1) the number of parcels has changed.

  (2) the names of the plot has changed (WF attribute).

  (3) time info Goffy where t0 and dt were inconsistent with what was already posted (new data point a t0 that is earlier than what is already plotted this plot)

  It's a pain to figure out the first time.

  Ben