Can I edit pictures if my camera does not support RAW?

Similar Questions

• I can't download lightroom cc because "adobe does not support the system" I use. How the hell am I supposed to know what system he supports and how do I get the system that God Adobe says that I have? Googling lightroom cc requirements made n

  I can't download lightroom cc because "adobe does not support the system" I use. How the hell am I supposed to know what system he supports and how do I get the system that God Adobe says that I have? Googling lightroom cc requirements does not help.

  System requirements | Creative cloud

  The system requirements (lightroom)

• I just bought a Nikon D750... Just went to upload my images in Lightroom 5 and he said: it does not support RAW NEF files. What am I supposed to do? Should I switch to Lightroom 6? If so, how much is an upgrade?

  I just bought a Nikon D750... Tried to download my images in Lightroom 5 and he said: it does not support RAW NEF files. What am I supposed to do? Should I switch to Lightroom 6? If so, how much is an upgrade? Help :)

  No fees. All the updates to version 5 are free of charge for owners of version 5.

  In Lightroom, click Help > updates

• Lightroom for Android does not support RAW (NEF)... ?

  You try to read my card microSD from lightroom for Android. It shows only my photos jpg converted and not my NEF images. So what is wrong? LR do not support the NAVE... ?

  Hi andreass,.

  From now Lightroom Mobile for Android supports only DNG file format.

  Please see the following article for the supported file format: Adobe Lightroom for mobile FAQ

  Kind regards

  Tanuj

• Wireless camera does not work with the new router

  Hello, I'm having a problem with a camera D-Link DCS932L after you set up the EA4500.  The manual of the camera can be found here.

  http://d2okd4tdjucp2n.CloudFront.NET/DCs-932L_A1_Manual_v1.00 (NA) - en.PDF

  It worked fine with my old D-Link router.  The rest of the House has not had a problem with the EA4500.  There is a level of criticality around this camera certail and if I can't make it work, I'll have to return the router.  Configure the redirection of port as 5556 ~ 5559, TCP protocol (but I tried "Both" as well"with the IP address of the camera.  It still does not work.

  I craft but not in networks, i.e. I'm not stupid with tech but port quarrels is out of my comfort zone.  This camera with our old router setup took minutes.  I spent five hours trying to make it work on the EA4500.

  I guess you have the static IP value, or having a reserve of DHCP MAC address for the camera, network OK settings.

  What was the authentication wireless on the old router and that you use the new 4200?

  Is it possible that the camera does not support the encryption used by the 4200, i.e. wpa2-personal?

  Have you tried WEP to see if the unit works then?

• I have Adobe CS5 Extended. Recently bought a Canon 7 d MK II. Camera Raw does not support the 7 d MK II. Can I switch to 6 CS? That will solve my problem? I'm going to lose my plug ins

  I have Adobe CS 5 Extended. Recently bought a Canon 7 d MK II. The 5 CS camera raw does not support the MK II. Can I upgrade Photoshop CS 6? This will solve my problem? I lose my plug-ins?

  Yes you can upgrade: $400 for the scope. Creative Suite 6

  CS6 supports Adobe Camera Raw to 9.1 present however, your operating system must be Windows 7 or superior and OSX 10.7

  You will not lose your plugins, but you will need to reinstall on CS6. Check with the manufacturer of plugin for specific updates CS6.

• My camera is recording in MPEG-4, but it does not support Windows Movie Maker. What can I do?

  Original title: Windows Movie Maker

  I am running XP Pro 2002 SP2. I bought a Kodak video camera that shoots formant MPEG-4 and Windows Movie Maker does not support. What should I do?

  You may not have the right codecs installed for the type of video file that you are manipulating? One option is to search for and install a code pack, such as the k - lite codec pack.

• Click camera does not

  Hi all

  I have a 6s model 64 GB iPhone.  For some reason, the click of the camera does not work when you take a normal picture.  If I have a filter or change a square photo, click works fine, its only when I use the photo without filter mode.

  I tried reseting all settings, by turning the lock/keyboard click and outside and adjust the volume of the phone, it just seems to not only work in the scenario above.

  Any ideas on how to fix or is this a known bug?

  Thank you

  Paul

  Hello, you can try to do a hard rest before to backup your data.

• Q10 blackBerry camera does not work after upgrade Q10 to 10.3.1.1581

  I've upgraded to the new operating system on the weekend and I love the new screens and functions - except that now all my camera does not work, can't take pictures (movies are OK).  I tried all settings, no combination it will do the job.  Restart the phone does not work.  Any suggestions?

  I would like to peform a security wipe on the device.

  To perform a security Wipe please follow the instructions below. Don't forget and allows to do a full backup before erasing all data will be erased when the BB link wipe:

  http://www.BlackBerry.com/BTSC/KB33591

  Once the wipe is complete, you can restore your backup. Remember that the data in the backup can be the source of the original problem and restore can restore the problem, as well. To compensate for this, I do not recommend restoring the passage of the backup settings.

• Application of my camera does not work

  Application of my camera does not work, it tells me that something went wrong, whenever I try to take a picture, I don't know what's the problem with him. I built in camera on my laptop, and the app is updated. How can I fix?

  Hello

  It is clear from the description that you have problems with the camera application

  Here are a few things you can try

  Method 1: Download and run the troubleshooter app and check.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Method 2: Synchronize the application license and check.

  To synchronize your licenses app, follow these steps:

  a. on the Start screen, tap or click on Store to open the Windows store.

  b. drag from the right edge of the screenand then tap settings.

  (If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down and then click settings.)

  c. press or click App updates. If you have not connected to the Windows store, sign in using your Microsoft account.

  d. press or click on Sync licensing.

  For more information, see the link.

  What to do if you have problems with a soft

  Method 3: reinstall

  Finally, if all else fails, you may need to reinstall the application. Just right click and click on uninstall. Then install it on the app store

  If the problem persists or you want to help, reply to this message

  Ashwin0

• pictures 1.0.1 does not work in my mac

  pictures 1.0.1 does not work in my mac when I open it I see the welcome message and the Tower, but when I click start it just stays for a long time as if it was loading, but nothing happens. Even I can't close it unless I go in mac preferences, and then click Exit forze then it closes.

  It worked before?

  You is a photo for Mac forum

  Photos for Mac

  This is the Office Mac Pro forum. I asked that your post moved to the forum of Photos for Mac or another appropriate forum.

• camera does not turn on

  I tried to load camera after death, it does not at all, but the orange light is on when it is plugged, let it charge all night and still it won't turn. I videos I would like back, please help.

  The charge indicator lights orange when the charging starts. It seems that the battery is charged. Try to turn on the camera while loading and check if it is turn on.

  Note: The charging light turns off, charging is completed.

  If the camera does not turn ON even when the load is in progress, the service is required.

  You can initiate the service from the link below:

  https://eService.Sony.com/

  You can also contact our telephone support or Chat to try additional troubleshooting procedures.

  http://eSupport.Sony.com/us/p/select-System.pl?Director=contact

  Please provide model # exact camera while contacting support, so that they provide accurate information. You can locate model # on the back panel and it will start with the letters MHS.

  If my post answered your question, please mark it as "acceptable Solution".

• Camera does not work on my Satellite C50 - B

  C50 - B PSCMLA-02F00S satellite

  I recently bought my C50 Satellite and that you want to use my camera and when I click the icon it tells to connect me your camera. If I go to device manager/imaging services there is no camera there.

  I want a video contact in Facebook, my family and the camera does not work.

  Can someone please!

  Hi Alicia

  Are you using the original operating system preinstalled that you got with your machine?
  I assume it must be Win8.1, right?

  What happen when you try to use photo app?

• Satellite L500 - Web Cam does not work

  Hello.

  My book built into the camera, and that camera thos not inicialize,

  I have ave made a HARD drive recovery, and after the web camera software was not installed. I downloaded this software one of the device drivers and it instaled in the laptop, but the camera, but the camera does not work.

  Is there a way to fix it?

  Thank you.

  The question is: is cam material recognized and detected by the system or not?
  You can see in the Device Manager?

• normal flash camera does not work after the update of Marshmallow to lenovo turned vibe

  after update of lenovo vibe turned 6.0 when open fash normal camera does not work and I can't do it open or closed or outomatic is disable

  but when open video camera flash is working and also with any another application to camera is working normally

  How can fix this?

  reset the camera settings after Flash open ligt