Can I extend my MD1200 RAID6 configuration?

Similar Questions

• Mode Dual monitor: can I extend the main display from right to left?

  I have a Setup dual monitor with

  Main screen with desktop computer: Dell S42092

  Secondary display: Inspiron notebook.

  Is there a way to extend from left to right?  I wish I had my secondary screen (laptop) positioned on my left, not the right, which seems to be the only way that the configuration of the resolution of the screen allows you to do.  I currently configured as

  Display (2) Dell s24092

  Several screens: extend these screens (this allows me to drag from left to right, which is not intuitive if the laptop is on the right.

  If I can't do it with this configuration, this work with another monitor, type?

  Trudy-o

  My OS is Windows 7, but I've been to the screen "Changes the appearance of your poster" you describe.

  It identifies the laptop as monitor 1 and the S24092 Dell Monitor 2. It allows me to do 1 or 2, my main screen, but it does allow me to pass the identity of 1 and 2.   Therefore, any screen is my main screen, management of drag forces me out of the side right of the main screen (the great Dell) before entering the screen of the computer, which I turned to the left.  I am left handed and I smile with my left hand, and I'd rather have my secondary monitor to my left.  Is it makes sense?

  The identity is to tell you, visually, that is, whose number has no significance. The computer screen will always be 1 and the outside will be always high because you can not disconnect and because it will be the first computer find at boot.

  To put secondary (2) on the other side, press the image of monitors, monitor 2 drag it to the other side of the #1 and press apply then / adjust displays are flashing and if he succeeds, it will appear a window with a 15 seconds timer to reset the display if no one pressed the Yes button.

  Basically, you want to match the image with your configuration.

  I'm left-handed too, but use the mouse with your right hand. and I have a laptop with Vista and an external monitor (primary) to the left of the laptop.

• Can I extend 2 networks with an airport express

  So if I have a router dual-band simultaneou to address AirPort Extreme and an airport express base station simultaneous dual-band, can I extend the two netwoks with just an Airport Express or do I have two?

  When you lay it wireless, the link will only exist on a single Strip... but the Express will use the two bands to connect clients.

  If you want to force connections to 5 GHz then you will normally need to use two extensions... for 2.4 ghz and 5 GHz... but I do not recommend this type of installation.

  You should tell us a bit more to understand the issue.

• Warranty is expired on Satellite P100-160 - can I extend it?

  Hello world

  My warranty expired a few months ago.
  Anyone know if I can still extend the warranty and where?
  I'm looking for the guarantee of first registration certificate (I lost it)

  Hello

  As far as I know it of not possible to extend the warranty if the standard warranty has already expired.

  But check out this page for more details:

  http://EU.computers.Toshiba-Europe.com/-> download-> guarantee and registration for the Service & support

  You will find here also you registration in registration data

• Can I extend my Airport Extreme 6 with an Airport Express A1264?

  Can I extend my Airport Extreme 6 with an Airport Express A1264?

  I've just set up my new Airport Extreme 6.

  I used to have an Airport Extreme 1 (persist, but currently unused).

  • with an Airport Express base station 1 (A1264), which is connected to
    • My usb printer
    • a gadget of cisco to help my ATT cell service

  I can't understand how to add the Express on the network.

  Any suggestion would be appreciated.

  Thank you

  Brad

  The Airport express does not appear as a device listed to select.

• USB 6009 CANNOT CHANGE THE CONFIGURATION OF TERMINAL TO CSR... Can't SEE not the OPTION configure when right-click on the device...

  USB 6009 CANNOT CHANGE THE CONFIGURATION OF TERMINAL TO CSR... Can't SEE not the OPTION configure when right-click on the device...

  Once again... Thanks for the tips...

• Disk management: How can I extend my C: drive

  I want to thank my c: drive.  I guess I made the mistake of creating multiple partitions for music:, films: and pictures:.  Should have only 1 car and several folders, right.  Now, how can I extend my c: drive to the full capacity of my hard disk?

  Hello

  Remember to BACKUP! multiples by using several methods.

  How to resize a partition on Windows Vista
  http://www.vistarewired.com/2007/02/16/how-to-resize-a-partition-in-Windows-Vista
  How to remove and extend a Partition with Vista disk management
  http://www.Vistax64.com/tutorials/95418-disk-management-delete-extend.html

  How to remove a partition on your hard drive?
  http://wiki.answers.com/Q/How_do_you_remove_a_partition_on_your_hard_drive

  Change or resize Partition (NTFS, FAT or FAT32) size in Windows Vista
  http://www.mydigitallife.info/2006/11/27/change-or-resize-partition-NTFS-FAT-or-FAT32-size-in-Windows-Vista/

  How to resize, extend, reduce, remove, Merge Partitions in Vista.
  http://www.WinVistaClub.com/T11.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• can I extend the ram up to 2 x 8 = 16 GB in the pavilion dv6-3050tx?

  can I extend the ram up to 2 x 8 = 16 GB in the pavilion dv6-3050tx?

  Hello

  The following link shows its specifications:

  http://support.HP.com/us-en/document/c02621602

  Max is 8 GB.

  Kind regards.

• This sucker is fast. How can I extend the time, the bios displays the initial startup screen?

  I sometimes want to fool around with the bios and other items in the first startup screen, but it does not display still long enough for me to recognize the function related to the options keys.

  How can I extend the time that is displayed?

  Please to identify your computer.

  Ook from Lto the base/back/side of the pc/laptop to the sticker with barcode.

  Item number of pole 2 as seen on the following example of label with barcode of a HP laptop. The barcode on your HP product may be slightly different in appearance, but will still have important information necessary for us to help you.

  #Don't post not the serial number, as it is personal information. ###
  
  Display the version of the operating system installed (and whether 32 or 64 bit) and if the CPU as a product AMD or Intel

  Not showing information as requested will delay our responses and troubleshooting slow the question that led you to create a thread.

  Normally the F10 is the key used to enter the BIOS of a PC HP. Begin to type the F10 key as soon as your press the power button

  Best regards

  ERICO

• How can I disable the automatic IP Configuration in Windows 7?

  Is someone can you please tell me how to disable the automatic IP Configuration in Windows 7?  I am happy to change the registry to implement if necessary.

  Why?

  Because my PC sometimes gives an IP address like 169.254.0.1.  This is because Windows has detected that your computer is connected to a network, but the PC has not yet given an IP address by DHCP on the network, so Windows Server the automatic IP Configuration comes in and gives the PC an IP address that starts with 16.254.

  The reason why that the DHCP server on the network has not given an IP address was because the network is coming a few seconds before the DHCP server comes up, and the automatic IP Configuration Windows comes too quickly.

  Of course, once the PC has an IP starting 169.254, he cannot communicate with my router that has an IP address that starts with 192.168.  The only cure, outside re-booting, is to issue the ipconfig/renew command to obtain an IP address from the router DHCP server.

  If I can turn off the automatic IP Configuration of Windows (I could disable in XP) then I can avoid this error.

  One option that you have.

  You can set the IP address to a static IP address.

  Reach:
  Beginning
  Control Panel
  Network and Internet
  Network and sharing Center

  Click on connection to the Local network (a separate dialog box opens Local Area Connectin status)
  Click on Properties (opens the dialog)
  Click on Internet Protocol Version 4 (TCP/IPv4)
  Click on Properties

  On the general tab, move the radio button to use the following IP address:
  Here you can set the IP address that you want to use the machine.

  Example of Configuration:
  192.168.0.254
  255.255.255.0
  192.168.0.1

  You will need to note the IP DNS addresses you need more.
  If you like you can even use a set of public DNS servers for free. http://www.online-tech-tips.com/cool-websites/free-DNS-server/

  Please note that the sample configuration assumes routers IP is 192.168.0.1, check please. :)

  Good luck

• Can I extend the "sticky key" function key "fn"?

  I need to use the 'home' and 'end '. On my ASUS keyboard, these keys must be pushed simulaneouly with the "fn". I have only one arm that is imposible. Can I extend the "sticky key" function key "fn".

  My computer is an ASUS UX31E.

  Hello WarwickZD and warwick1,

  The short answer is no.

  We cannot extend this functionality to the Fn keys.

  In order to get this kind of functionality, you would probably need to investigate the 3rd party software.

  Best regards

  Matthew_Ha

• How can I extend a partition and remove others to increase the space in Windows 7?

  I have patitioned my drive; Local disk (D) 10GB;  Main patition (E) 5GB.

  1. How can I extend had ' 30 GB? or

  2 remove would be ' & 'E' and replace the space unallocated in 'C '?

  Evertime I try something "extend volume" is not active.

  Graham

  Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Note: there is also a bootable CD or bootable Flash Player versions:
  http://www.partitionwizard.com/Partition-Wizard-bootable-CD.html
  http://www.partitionwizard.com/bootable-Flash-drive.html
  Among the features and functions: create partition, Delete partition, format partition,.
  A partition resize, move partitions, Partition recovery after an accidental deletion,
  Convert the partition, partition Explore, Hide partition,
  Change the drive letter, a partition active Set, Explorer (content display) of the partition.
  Note: To complete any task use the "Pending Operations" box at the bottom left.

  Alternative to Partition Wizard (a bit easier to use, but Partition Wizard and EASUS have almost identical user interfaces)
  EASEUS Partition Master Home Edition (free):
  http://www.partition-tool.com/
  Partition software ALL-IN-ONE and the most convenient hard disk partition manager Kit
  Includes Partition Manager, Disk & Partition copy Wizard and Partition MBR and GUID partition GPT disk recovery Wizard (table) on Windows 2000, XP, Vista, Windows 7 and Windows Server 2000/2003/2008 (32-bit and 64-bit).
  It allows users to resize/move Partition, drive system extend, copy Disk & Partition, Partition merge, Split Partition, redistribute free space, convert dynamic disk, Partition Recovery and much more.

  J W Stuart: http://www.pagestart.com

• How can I extend my Windows 7 Enterprise 90 Day Trial version?

  How can I extend my Windows 7 Enterprise 90 Day Trial version?  I can't find anywhere to buy a key for this version.

  You can not, you can try this reset, but after it has expired, you must save and buy the final product or return to your previous version of Windows. Windows 7 Enterprise Edition is a volume license edition only, Microsoft it provides only an assessment because it has parity feature with Windows 7 Ultimate edition.

  Windows 7 - version comparisons:

  http://Windows.Microsoft.com/en-us/Windows7/products/compare-editions

  MS Windows 7 store price:

  http://store.Microsoft.com/Microsoft/Windows-Windows-7/category/102

  You could try to reset the product to get an extension, no guanrateed.

  Click Start, type: CMD

  Click with the right button on CMD, click run as administrator

  At the command prompt, type the following command:

  slmgr.vbs - rearm

  And then press ENTER.

• only two partitions of Windows 7 can not extend nor I can create a new drive

  I have lenovo z560 and its installed with windows 7 home baic I have only 2 left c and d ' training, now the d drive is full and I can't extend space or I can create a new partition. Please help me thiz

  This is a free awesome tool,

  http://www.partition-tool.com/personal.htm

  But it is better to save what is first if you intend to extend it in C.

  Better safe than sorry.

• So basically I can't extend my 3 TB hard drive 3 TB because windows 8 is the treatment as a MBR. Error [0 x 80042468]

  So basically I can't extend my 3 TB hard drive 3 TB because windows 8 is the treatment as a MBR. Error [0 x 80042468]

  Background: after a bit of trouble to install windows 8 on my SSD, I had at one time install on my drive 3 TB of seagate for troubleshooting. Of course, this has reduced the reader to 2 TB for the MBR. I finally solved the problem by changing the mode AHCI instead of IDE interface and installed the OS on my SSD. To my dismay, I could not reclaim the unallocated space.

  I tried to format the drive and delete volumes using disk management, windows 8 installation disc command prompt (you have the option to format and remove the disks and volumes). Basically, I'm stuck. I can't extend the volume. Windows 8 install disc gives me the error [0 x 80042468]

  There is a similar problem but I can't access the answer. (ACCESS DENIED)

  * edit * there is no system of operating on the 3 TB drive, it is completely on the SSD.

  Hello

  Thanks for posting your question on Microsoft Community!

  After your description, it seems that you have a problem with the extension of 3 TB hard drive.

  I would like the season go the following information.

  I suggest you to see the steps in the link.
  http://support.Microsoft.com/kb/2604034

  You can also refer to:

  http://msdn.Microsoft.com/en-us/Windows/hardware/gg463525.aspx

  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 2581408

  I hope this helps. Please let us know if you need assistance, we will be happy to help you!