Can I extract files from a WinXP VM that does not start?
Short: one of our virtual machines seems to be damaged and will not start. Is it possible to extract the virtual machine files that were left in the Windows environment, without having to start the virtual machine?
The long: the error refers to "Windows XP Professional - s002.vmdk. These trust seem to be within the content of the packaging of the virtual machine. What I find unusual, is that this particular virtual machine has about 21 files hard, while our other VM have only 1. No idea why this particular facility chose to break the virtual machine in as many files?
Our default installation is to have all files created within the virtual machine that is stored in a shared folder on the host computer, but this particular user left some important data on the desktop, that is why we are so eager to get it back before blowing away from the virtual machine and install a new one. (Or can it be repaired?)
Help is appreciated. Thank you!
Sylin wrote:
Our default installation is to have all files created within the virtual machine that is stored in a shared folder on the host computer, but this particular user left some important data on the desktop, that is why we are so eager to get it back before blowing away from the virtual machine and install a new one. (Or can it be repaired?)
Take a look on HOWTO: ask (and answer) Questions as a reference to the type of information you should expect, when a help request.
If you use the Fusion 2.x, then take a look at: VMware Fusion (menu bar) > help > VMware Fusion help > managing Virtual Machines > VMDKMounter help to mount a ramdisk as a Mac Volume Note: this should be done with the Virtual Machine to stop, not suspended and merger closed and if VMDKMounter up successfully you will not be informed, and a white player titled Untitled icon should appear on your office.
About VHDs monolithic vs Split Virtual Hard Drives by default under Fusion 1.x is monolithic and under Fusion 2.x it is divided, but the user can certainly replace the default values and to explain why, but the rest are monolithic while a split which would be absolutely taxable because aside from the fact that you have not presented any technical to analyze information I'm not sure you could in this case and there are something only the user who created each virtual Machine can answer as to what it has done. If you want that the split to be monolithic, it can be changed.
In any case regarding it repairable, if possible, however without knowing what is the exact error and or looking for a files .log for the target Machine virtual still not enough technical information has been presented. Take a look at: collecting information for VMware Fusion
Tags: VMware
Similar Questions
-
NEED to recover files from the xp computer that does not start.
I changed startup on an old xp computer programs and now it does not start (I can accidentally put driver not run at startup). blue screen; STOP: 0x0000007B (0xF8992528, 0xC0000034, 0x00000000, 0x00000000) xp sp3 no safe mode without recovery does Center no disc. I just bought a computer to try to recover the information with win 7 but can not slave the drive to him because it is ide and the new computer is too modern. I need to save files are important on the xp computer is it possible to save them?
I met this BSOD error several times, and the following fix usually (not always) allows the hard disk to be read by the system...
-Boot your system and access the BIOS Setup
-It will vary with different systems, but try to press "F2", "F10" or "delete".
-If you need help with this step, let me know the model of the system, and I'll see what I can come up with
-In the configuration of the BIOS, looking something like "Device Boot Configuration"
-Go to the hard disk configuration and change the current option
-Here are the most common options that I can think of:
-SATA IDE, AHCI, (newer systems have more options, such as IRRT)
-If the current option is "SATA", change it to "AHCI" or "IDE".
-If the current option is 'DCIS', change it to "IDE", etc...It's just a quick run through a possible fix, without knowing the details of your system! If you need more detailed help, I would like to know the details of the system, and we'll see what we can do!
-Riley
-
Hello. I bought the cc (2014), updated to the cc (2015). I continued to pay. but I can't update. It gives an error that does not license! What should I do? urgent.
Your subscription to cloud shows correctly on your account page?
If you have more than one email, you will be sure that you use the right Adobe ID?
https://www.adobe.com/account.html for subscriptions on your page from Adobe
.
If Yes
Some general information for a subscription of cloud
Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work
Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud
-Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
-ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
-http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
.
If no
This is an open forum, Adobe support... you need Adobe personnel to help
Adobe contact information - http://helpx.adobe.com/contact.html
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">===>
-Select your product and what you need help with
-Click on the blue box "still need help? Contact us. "
-
All of a sudden I started getting error "files are on a volume that does not support Trash. You want to permanently delete the item?
iMAC OSX 10.9.4.
LR 5.6.
Camara 8.6 gross
Any idea?
Please help me...
Thanks in advance
Jose
It's quite common - there are several discussions about this.
Simplest solution is to an empty folder on the disc, and drag it to the trash. LR will then work until you restart. You can empty the trash or not. Don't forget to make a different folder when you restart the computer.
-
When you manage files in iCloud, from an iPad, I can move to the files from one folder to another, but not in the Preview file. Secondly, when I check the file Preview to iCloud from Mac content is so different when you look at an iPad. Why is the gap between the iPad and the Mac?
Try to go to iCloud.com to see if the elements are there and whether the device or the computer. That should indicate if the device or computer is not synchronizing. If the computer, try going to System Preferences/iCloud and stop synchronization. Wait a few minutes, then recheck the timing. If the device, go to settings/iCloud and do the foregoing.
-
All of a sudden my free AdAware spyware program does not start. I can't delete AdAware from the control panel or reinstall from the Web of Lavasoft site... There are some missing component installer. WHAT HAS HAPPENED, HOW CAN I REMOVE IT?
Hi BobRullo,
If you have installed the AdAware software recently, try to do a system restore that will repair return the computer to the point while it was working fine. Then, try to install the software.
How to restore Windows XP to a previous state
You can also ask your question in the Lavasoft forum for assistance.
Reference: http://www.lavasoft.com/mylavasoft/support/faqsHope the helps of information.
Please post back and we do know.
-
Converted file from Flash to HTML5 Canvas does not publish
Hello
• I use a Mac.
• I have an existing Flash file, operation which publishes fine.
• Convert to HTML5 Canvas using the command-> convert to other Document Formats-> HTML5 Canvas
• Do not make any changes to the settings of the HTML5 Canvas publication
• Select "publish."
... The .html file displays only a blank white block, the size of the Flash file.
I tried:
• Create a new HTML5 Canvas file and paste the existing content in this
• Copy the script action layers of the original in the Web a Flash file
• Check the settings of publication for something unusual
Any help is appreciated.
Looks like the JSON file which poses problem. You can disable the spritesheet option in settings of publication, and then your multiple bitmap files can operate locally as well.
Regarding Javascript errors, those that are produced inside the code CreateJS, you wouldn't want to be messing around with it! They are only security errors, or the consequence of something that does not not due to security restrictions. You will not get the errors when files are online, or if you can disable the sprite sheets, I suspect.
-
I am running with "Backup and Restore" backups in Windows 7 Professional and constantly get this error in the logs:
Backup has encountered a problem during the practical C:\Users\Tim\Documents\Blender file backup. Error: (the system cannot find the specified file. (0 x 80070002))
"Practical Blender" is a folder I previously removed documents and backup should not be looking for it. I tried to remove the job from the scheduled backup with Windows Task Scheduler and create and execute a new backup job, but the problem goes away. It is only this specific file gives me this problem. I deleted the other folders of Documents before and since it was started without any problem of backup.Is it possible that I can stop backup to find this file that does not exist?
What happens when you recreate this folder?
-
Original title: mainly MSE does not start at startup. have you tried re-loading and other elements on the card, still no luck. Here is the error code I have and the information complete.
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
Error 0X803C0107
Details of the editor for Windows Firewall troubleshooting
Verified issues
You cannot access shared files and PrintersYou cannot access shared files and printers
You can't access shared folders or printers on a computer on which Windows Firewall is enabled. This happens when the Windows Firewall blocks traffic entering via the UDP ports 137 and 138 and the ports TCP 139 and 445. Checked
No workingRemote Assistance remote assistance does not
When you use Windows Help and Support, remote support available to offer assistance to a computer, you receive the error message "the remote server computer does not exist or is unavailable", even if Remote Assistance and file sharing and printing are activated. Windows Firewall may be blocking Remote Assistance. Checked
Windows Vista may not start Windows Vista FirewallWindows could not start the Windows Firewall
On a computer that is running Windows Vista, you find that the Windows Firewall service is not running. When you try to manually start the service, you get "Windows didn't start the Windows Firewall on the Local computer." For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service particular 5 error code. "error message. This can occur if the 'MpsSvc' account does not have the necessary permissions for the registry keys concerned. Checked
Windows Firewall service is not his firewall service is not started
Windows Firewall service is not running or is not started. Checked
Issues checked the details of the detection
6 you cannot access shared files and printers checked
You can't access shared folders or printers on a computer on which Windows Firewall is enabled. This happens when the Windows Firewall blocks traffic entering via the UDP ports 137 and 138 and the ports TCP 139 and 445.
Unlock the file and printer sharing in Windows Firewall works not
To allow access to shared folders and printers, except for the file sharing and printers in the Windows Firewall must be enabled.
6 remote assistance works not verified
When you use Windows Help and Support, remote support available to offer assistance to a computer, you receive the error message "the remote server computer does not exist or is unavailable", even if Remote Assistance and file sharing and printing are activated. Windows Firewall may be blocking Remote Assistance.
Allow Remote Assistance in Windows not running Firewall
Which allows Assistance remotely as an exception in Windows Firewall it unlocks and corrects this problem.
6 Windows Vista could not start Windows Firewall check
On a computer that is running Windows Vista, you find that the Windows Firewall service is not running. When you try to manually start the service, you get "Windows didn't start the Windows Firewall on the Local computer." For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service particular 5 error code. "error message. This can occur if the 'MpsSvc' account does not have the necessary permissions for the registry keys concerned.
Set permissions for the registry keys concerned not run
Setting permissions for the registry keys concerned will solve this problem. Applies only to computers by using Group Policy to manage the firewall.
6 Windows Firewall service did not start Checked
Windows Firewall service is not running or is not started.
Start the Windows Firewall service is not running
Start the Windows Firewall service solves this problem.
Details of detection
Collection information
Computer name: NORMBRESINSKI
Windows Version: 5.1
Architecture: x 86
Time: 09-20-2010 07:51:49
Publisher details
Troubleshooting Windows Firewall
Automatically fix problems of Windows Firewall, such as Windows cannot start the firewall service (0x5) Windows or Windows remote assistance does not work
Package Version: 1.0
Publisher: Microsoft Corporation
You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
-
Moving video files from digital camera, date taken does not save
On Win7 Pro I'm having a problem where when I move the files from my digital camera Canon or my Sony digital camcorder to HDD the date taken on the videos aren't save. It defines at the time I moved the hard disk instead. It comes to all the dates in the properties.
It's only when I copy the video files keep everything file photo.
This happens when I copy files directly from the camera or the SD card
All the files on the camera are correct but none of those on the hard drive.
Ok. I had trouble to transfer photos from my old computer to my new computer. The dates and times on the pictures changed.
I finally got the moved and kept the correct dates on each photo.
That's what I did:
1. I opened the 'Pictures' folder on the old computer and click on "Select all" under the tab 'Edit' at the top.
2. then I went to the "Edit" tab and choose "move to folder".
3. in the next window, called '' Elements to move, '' I found the file that I wanted to move the photos to and selected this folder and then clicked on "move".
4. all photos have been transferred to the new computer with the date and time correct.
5. However, this deletes all photos from the old computer. But I do not really need them on the old computer since I will be recycling with Dell.
We sincerely hope that this information helps someone else, since I had a hard time finding how to do this task.
Good luck.
-
Computer laptop Lenovo 3000 N200 that does not start as a system file is missing or damaged:
«I have a laptop Lenovo 3000 N200 that won't start as "" Windows has no start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM "»»
Rescue and Recovery Tools will allow me to restore the hard drive to factory settings, but I prefer to back up important data first. Rescue and recovery apparently allow backup and pays the appropriate folder / structure of files, but the "Start" option is grayed out.
Then I tried to boot from Windows XP CD but it signals that it has no hard drive, although Rescue and Recovery can apparently go to folder/file structure.
How can I move it please?
Thank you very much - Simonides
all sorted out now... see http://forums.lenovo.com/t5/Lenovo-3000-and-Value-line/Lenovo-3000-N200-can-t-access-Rescue-and-Reco...
-
I recently got a desktop computer. It's an hp with Microsoft Windows XP. I don't understand not brand-new, but it worked when I got it. My children decided to "help" with a cd of one day and he has not worked since. It is not simply turn and nothing shows up on the screen as if I never put anything in the drive. I tried to open a file manually, but he just told me to insert a disk in drive D. When I close the door, it flashes twice, then nothing happens and it is completely silent. I'd appreciate any help.
Sounds as if the reader does not, replace it and see what happens.
"evil heart," wrote in the new message: * e-mail address is removed from the privacy... *
I recently got a desktop computer. It's an hp with Microsoft Windows XP. I don't understand not brand-new, but it worked when I got it. My children decided to "help" with a cd of one day and he has not worked since. It is not simply turn and nothing shows up on the screen as if I never put anything in the drive. I tried to open a file manually, but he just told me to insert a disk in drive D. When I close the door, it flashes twice, then nothing happens and it is completely silent. I'd appreciate any help.
-
How to upgrade PSE 8 to open the RAW files from my new camera that are not accepted?
Cannot open RAW files of my 7 d Mark II in PSE 8. How to download the update to the PSE 8 solve this problem?
Thank you
PhotoDoc
The 7 D Mark II only has not supported until Camera Raw version 8.7. Elements 8 supports the versions of Camera Raw 5.5 to 6.2.
Your choice must pass to 13 items or download the free DNG Converter , so you can open the DNG converted into 8 elements.
-
How can I find the suspended process when the computer does not start?
My friend (Vista Home Premium x 86 SP2) of start-up computer is more completely on its own. I can start safe mode, and it will start successfully if I hold down the SHIFT key during startup. I tried to disable all non-essential services and programs from starting with MSCONFIG. I thought about allowing the boot logging, but am unsure if this will give me any useful information. What is the best way to determine where the boot process is suspended?
Hello
I suggest that you try to perform the boot repair and check if this can help:
http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions
I also suggest to try a startup repair.
http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions
It will be useful.
-
How can I fix computer that does not start after the fan turns phase?
I have a Compaq Presario SR5510F PC, Windows Vista Home Premium, AMD Athlon x 2. Lately, my computer is even worse at the start. When my computer starts, the fan should run for a few seconds, then it should stop and lead at the start with Compaq logo screen. But lately, the startup was completely terrible for my computer. Today, most of the time when I press the button in the box of the computer, the fan turns on and it continues to turn, and nothing comes on the screen. It isn't that rarely when the fan stops running, but then the monitor displays always upwards in white and VERY rarely when the startup screen appears, then it freezes on this screen. At this rate, my computer is totally useless when it does nothing but run his fan. This means that I can not go to boot options at all and go to the "last good configuration". What can I do to fix the computer when I can't have anything with her while she is empty?
It sounds like a hardware problem, not a software problem. If the computer rarely gets past the BIOS (material audit) stage of the startup sequence, then Windows is is not yet involved in the boot process again. Request assistance from someone trained in the skills of troubleshooting hardware since this can become very expensive very quickly.
"Maersk Custard" wrote in the new message: * e-mail address is removed from the privacy... *
I have a Compaq Presario SR5510F PC, Windows Vista Home Premium, AMD Athlon x 2. Lately, my computer is even worse at the start. When my computer starts, the fan should run for a few seconds, then it should stop and lead at the start with Compaq logo screen. But lately, the startup was completely terrible for my computer. Today, most of the time when I press the button in the box of the computer, the fan turns on and it continues to turn, and nothing comes on the screen. It isn't that rarely when the fan stops running, but then the monitor displays always upwards in white and VERY rarely when the startup screen appears, then it freezes on this screen. At this rate, my computer is totally useless when it does nothing but run his fan. This means that I can not go to boot options at all and go to the "last good configuration". What can I do to fix the computer when I can't have anything with her while she is empty?
Hi Rickbsk,
You can check out the link and check the suggestions provided by scotty1294.
If you have not tried all the suggestions above, try and see if it helps.
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Maybe you are looking for
-
Download new modules that I appear on the Add-ons Manager, but not in the menu drop-down
When I download a new add-on on the site add-on from Mozilla, the Add - it will appear in my Add-ons Manager, but I can't use, because it will not be displayed on my menu drop - even if the Add-ons Manager said that told Add-ons are enabled. How can
-
I plan to buy a 450 Watt power SUPPLY and a nVidia GTX 460 soon, but I just need help on whether or not someone has managed to get a card of this size in this case of Pavilion. I have pictures of the inside of the case (the son should be like that?)
-
This message only appears at startup (resarts or normal startup) and just close it all can work (apparently) very well.
-
Automatic update will not stay in automatic mode
I apply automatic updates to automatic and start, then a Virus I assume in turn he returns to disabled so I can't launch the updates for Microsoft Security Essentials
-
problem loading windows XP pro
I am running windows xp professional on my laptop. When windows displays, I get only the bar start at the bottom and that some options in the start menu. My office is white with just a blue screen and if I go to my computer in the start menu and clic