Can I hide a book or entry in the table of contents, based on a parameter?

Similar Questions

• CMDGW_CAT:3441: ERROR: can not have more than 3 entries in the LIST RACCESSPOINT

  Hello
  I have Tuxedo 8.1 in HP - UX.
  
  
  In the section of my dmconfig that I have:
  
  ....
  .....
  
  SERVICEF LDOM = DOMLOCAL RDOM = WTC1, WTC2, WTC4 WTC3
  .....
  .....
  
  I have this error when I tried to compile with dmloadcf y dmconfig:
  
  Invalid value
  CMDGW_CAT:3441: ERROR: can not have more than 3 entries in the LIST RACCESSPOINT
  CMDGW_CAT:1546: ERROR: dmloadcf: above the errors found during the syntax check
  
  increase the value of the parameter RDOM plus 3?
  How?
  
  Thank you...

  Hello

  Syntax:

  Service LDOM = local_domain RDOM = dom1, dom2, dom3

  sets the remote domains of failover for this particular import. It is not intended to provide access to a service in several areas. What you want, it's basically what you were doing, i.e.,.

  Service LDOM = local_domain, RDOM = dom1, dom2
  Service LDOM = local_domain, RDOM = dom2, dom3
  Service LDOM = local_domain, RDOM = dom3, dom4
  Service LDOM = local_domain, RDOM = dom4, dom1

  It would provide balance between the 4 areas and always provide areas of failover, although assigned to the ON_STARTUP linking strategies, then the following is sufficient:

  Service LDOM = local_domain, RDOM = dom1
  Service LDOM = local_domain, RDOM = dom2
  Service LDOM = local_domain, RDOM = dom3
  Service LDOM = local_domain, RDOM = dom4

  As only active areas will be used and those inactive is ignored.

  Kind regards
  Todd little
  Chief Architect of Oracle Tuxedo

• How hide the table of contents in the body of an e-book?

  Hey people, I'm kind of a weird request. Do not forget that everything I know about InDesign, I taught myself for a month, so I can miss major somethng.

  As an intern, I am creating ebooks and I have to make sure that those I create the same look as the ebooks previously created for my employer (better yet, I had to do it from scratch!). In their previous ebooks (EPUB file format) the table of contents posted by the ereader clearly indicates a specific style of OCD was used to create (he titles and subtitles, so it is not just the default style that draws from the file names), BUT there is NO table of contents anywhere in the body of the ebook itself. There is also no blank page where a table of contents can be hidden with a hidden layer.

  I created a table of contents to match style to them, but I can't it appears in the drop-down menu Styles TOC when I go to export EPUB book file unless the document of the table of contents is also included in the book file, and as I said, I can't get the table of contents in the body of the ebook itself just in the menu that is displayed by an ereader.

  Any advice?

  Did you use dialogue style of content Table to create a new style of table of contents? If so, then the new table of contents style must appear in the drop-down list TOC Style selected in the dialog box in the Navigation options to export EPUB.

  Kind regards

  POOJA

• How can I get the action to hide the table of contents to work as part of a conditional Action?

  GOAL: when a user takes the Quiz and fails, I wish they were able to get back underway and reviewing the materials before taking the quiz. As noted in other discussions, I have created actions advanced conditional and standard to achieve this:

  • Quiz results Slide Property executes the standard action "ResultsSlideVisitedAction", affecting a variable (AssessmentVisited) to 1, an indicator that the result slide has been visited.

  

  • If a user clicks the Retake Quiz button, instead of going to a "knowledge management", a quiz question classified early in the race with zero points, it goes to the first real quiz question. The slide to check knowledge runs the 'ExcludeKCAction', a conditional, looking to see if the result slide has been visited, which means that the quiz taken. If so, he jumps at the 1st question of the quiz slide.

  

  • I changed my Quiz message fail to tell the user to click the button Retake (which works fine) or navigate using the table of contents to review topics and then resume the quiz. The problem with this is that if a user uses the table of contents and gets to go to the slide to verify the knowledge to conditional action, they are sent directly to the Quiz.
  • So, I took a different tact and decided to ask the user to use a "Back in the race" button to review the course and then resume the quiz. Because you cannot add buttons to the slide of results, I created an invisible button to reset the AssessmentVisited variable to 0, so when the GET to the verification of knowledge, they are not sent for the quiz. I did this by adding the image on a button, and then by superimposing an invisible rectangular shape on top of the button image. This allowed me to add advanced invisible form actions. It worked!
  • The last thing I want to do is to hide the table of contents, so there is no chance of the user to return without resetting the variable. I tried to add the action to hide the table of contents, but it doesn't seem to work. Is this possible?  I tried to move the TOC to hide as actions of 1st, 2nd and 3rd and sill does not. Here is a screenshot of the conditional action that runs when a user clicks on my return to the button a course:
  • 

  I appreciate any thoughts on a solution to hide the table of contents as well. Thank you.

  Hide the TOC works only for OCD in overlay, you use a table of contents separate?

  With respect to the Score slide buttons, you make it very complex, it is possible since version 6: buttons on Question/Score 6 Captivate Slides?-Captivate blog

• Customize the table of contents for epub book

  Hello

  I have a book in ID CS6 file, containing ten chapters, each in its own starting with style heading 1 to "Chapter 1", "2", "Chapter 3" etc. It also contains more documents to cover, notes copyright, acknowledgement of receipt, info editor etc. (not quite formatted).

  Well, when I export to epub and open it in Adobe Digital Editions a table of contents is generated from all the documents, the names of files.

  Is it possible to exclude the entries, I want to be there?

  In addition, I can control the text of each entry? for example, the "cr.indd" file, I want the Notes"copyright" text in TOC.

  Thank you

  Short answer: you can control the TOC navigation by creating a table of contents Style (layout > Style of Table of contents) and including a paragraph style that you want that pulls the titles that you want in the table of contents.

  Then call on this Style of table of contents in the general Panel of the EPUB export dialog box.

  Looks like you need to get some basic information on creating ePub files. Here are the two best sources I know:

  (1) the books of Elizabeth Castro:

  http://www.elizabethcastro.com/EPUB/

  (2) videos of Anne-Marie Concepcion on Lynda.com. She produced videos on creating EPUB from InDesign CS5, 5.5, and 6. www.Lynda.com. (if Bob Levine sees this, it will add a free link of the week for Lynda.com).

• Topics and new books do not appear in the table of contents after generated in DHTML (RoboHelp v8)

  Until recently, when I tried to add a topic for a book in the Table of contents, I just dragged into the project manager in the Table of contents.  I don't know what is different today, but the new entries appear in the Table of contents pod but not in the generated DHTML.  To make it more confusing, to me anyway, some newly added topics show.

  

  Hello

  I don't think 'huge' search and replace that can affect things. But we need to check a few things first.

  When you look at the SSL recipe, using any type of a conditional build Expression? If so, perhaps you have tagged content and it is not for this reason.

  See you soon... Rick

• Page indent the problem with the table of contents entries...

  I have a few entries of table of contents running on more than one line. I would like the text to be indented from the establishment right indent/margin so that text does not as far as the Page numbers on the right margin of the text TOC block extend existing. I put a tab on the right so that the page numbers are tabulated on the right edge of the frame, but if I bring you the right margin with several (currently 5 mm) indenting, I can't have a tab stop to the page outside of the right margin.

  If I insert soft-return/new line tanks they wil get lost every time I have rebuild the table of contents (there will be a lot of it!)

  Any ideas, I'm sure it happens all the time for designers of the book.

  The same way you have a withdrawal of first line, on the left there is a final withdrawal of the straight line. You can set the right two inches (for example) withdrawal and removal of stretch to neutralize two thumbs, all on a single line will go completely to the right of the frame, and any point edge requiring line breaks will break two inches to the left of the right edge of the frame, while the last line will go to the right edge.

  

• Parameters of the table of contents: enlarge the symbol / symbol hide

  Hello everyone,

  in the skin editor / TOC-settings of 5 in captivity, I discovered two new (?) settings: symbol enlarge / hide symbol (I don't know if it's the exact terminology in the English version, because I use the Germany) where you can select the chart. Unfortunately, I wasn't able to find out how to work these settings or to find any description on the internet. Does someone could give me a clue here?

  Best regards

  Jan

  Guten Tag Jan,

  I think you speak of these two regions to change the icons for opening/closing of overlay to the table of contents. Wanted to add a screenshot with the English version, but the forums does not for the moment.

  They are intended to replace the small default icons for the table of contents in overlay mode of opening and closing by your own icons. There was a lot of complaints about these icons (double arrows) because they were so tiny.

  The other new feature (width) allows you to extend the width of the table of contents to more than 250px (always at least) which can be useful on glass with entries of large text for slides.

  Lilybiri

• Manual large editions with sensitive html setting. Is there a way to determine how the entries appear in the table of contents?

  I publish major textbooks with sensitive html setting. Is there a way to determine how the entries appear in the table of contents? If I publish a small section of the manual then 2nd level entries appear as eruptions under the chapter name, but if I publish the manual in its entirety then level 2 headings are not at all. I would like them to appear as the eruptions in the table of contents, but I need to publish the manual as a whole in order to keep the cross references. Any help will be greatly appreciated!

  I think that this would make clearer - and it would skip and tables of contents of books under.

• When I generate the table of contents from a new .book, I get blank pages between each page of the table of contents

  With FrameMaker 2015. When I generate the table of contents from a new .book, I get blank pages between each page of the table of contents, they are totally blank does not even a block of text. I click on Add> autonomous Create TOC. I keep the default settings. And that's what I'm left with.

  

  I can get rid of them by special> Delete page. But I never had to do before the 2015 version. I tried with older files generated in frame 10. same thing. If someone has encountered this?

  Master Pages are part of each document.

  You can import master pages from another document (i.e. a ' model') in your current document using the file > import > Formats... option and select layout from the list (deselect all others).

  If you have changed the current TOC for the problem of the Page Master on the left, then simply save the file and use the Edit > update book option for that OCD regenerated by using the new page templates.

• Hide the table of contents without overlap

  Hi! How can I hide the Table of contents on the right, but not overlapping le slides, maybe endangered? Is there any in the program or script? Thank you very much.

  You can create a table of contents in Captivate, using variables and actions progress/shared.

• Can I create a hierarchy of topic on the project manager pod or I must rely on the table of contents?

  Hello

  Can I create a hierarchy of topic on the project manager pod or I must rely on the table of contents? I use RoboHelp 9 (although I doubt that the version of the questions).

  Thank you

  Mary

  Hi Mary

  As you do this is by creating folders in the project manager, then create new topics in the files or move the existing entries in the records.

  If you work exclusively in the project manager, you are only able to move a single topic at a time. If you want to move a swarm of topics, open the pod of the list of topics and you can select as many as you want. Then drag the subjects selected to the folder on the project manager pod. Be a little careful when you drag. Often the mouse will pass over a tab at the bottom of the basket, and this can change their minds about you.

  See you soon... Rick

• RoboHelp 10 - is possible to change the icon of the TOC so that a 'book' in the table of contents. See the attached screen shot.

  In my current project for help, I have a set of topics that are specific to the use of our product in a country.  I want to change the table of contents of the specific book icon without changing all icons 'purple book '.

  Thank you.

  

  Hello

  Risk can be achieved, but if there is, it will have to be changed to code JavaScript and some "behind the scenes" files You would also be painted in the corner of having to do the same changes every time you generate the output.

  If anyone knows how to get there, it will be Willam. It will perhaps be pop and Advisor.

  See you soon... Rick

• Question: adding prefixes to the table of contents chapter entries?

  Hello I would like to know if anyone can help understand me how to format Table of contents entries to include a prefix.

  I want to each chapter entry in my table of contents to include the prefixes of words Chapter 1, Chapter 2... etc.

  For example. Just to say that my first chapter is called "aseptic".

  Currently the aseptic 'A technical' chapter title is formatted with a paragraph style called "chapter title", and this paragraph style is included in the "Styles of Table of contents.

  So for the moment my OCD simply shows the words "One Technique aseptic" followed by the page number.

  I want that entry of table of contents to say: "Chapter 1 asepsis.

  But I don't want the words "Chapter 1" to appear on the title page of actual chapter. "»

  Also, I want to be able to add unique style to the prefixes (I guess with character styles). So that I can make the "Chapter 1"style a little differently to "Aseptic", while both appear on the same line.

  Is it possible to do? I know that I can just click on the table of contents, and then make the changes directly, but it's not ideal because if I click on "update the Table of contents" then all changes are lost. I want the added prefixes dynamically so that they remain in place even if chapter headings are changed in the future.

  Thanks for any help.

  Of course, I see no problem:

  

• How can I exclude a level for the table of contents, but this amount as a bookmark?

  I know how to exclude a level for the table of contents (or rather include only levels I want to be included) and also how to create bookmarks from the table of contents entries, but how can I exclude a level for the table of contents, but always include it as a bookmark?

  Make 2 toc styles. One for the entries in the Bookmarks panel, you can generate a table of contents on the side of any page, and you must score in its definition to create bookmarks and other things that you use to build the table of contents for the visible part of your document to print. This should have unchecked the option create a bookmark in its definition.